Skip to content

L
linux
Commit fa1054a2 authored by Jiri Kosina's avatar Jiri Kosina
Browse files
Options

Merge branches 'for-3.15/multitouch', 'for-3.15/sony' and 'for-3.15/uhid' into for-linus

parents 6cf8c85f 9abebedb b95dd3ca 4522643a
Hide whitespace changes
Inline Side-by-side
Showing with 233 additions and 178 deletions
Documentation/hid/uhid.txt
View file @ fa1054a2
......@@ -93,6 +93,11 @@ the request was handled successfully.
event to the kernel. The payload is of type struct uhid_create_req and
contains information about your device. You can start I/O now.
UHID_CREATE2:
Same as UHID_CREATE, but the HID report descriptor data (rd_data) is an array
inside struct uhid_create2_req, instead of a pointer to a separate array.
Enables use from languages that don't support pointers, e.g. Python.
UHID_DESTROY:
This destroys the internal HID device. No further I/O will be accepted. There
may still be pending messages that you can receive with read() but no further
......@@ -105,6 +110,12 @@ the request was handled successfully.
contains a data-payload. This is the raw data that you read from your device.
The kernel will parse the HID reports and react on it.
UHID_INPUT2:
Same as UHID_INPUT, but the data array is the last field of uhid_input2_req.
Enables userspace to write only the required bytes to kernel (ev.type +
ev.u.input2.size + the part of the data array that matters), instead of
the entire struct uhid_input2_req.
UHID_FEATURE_ANSWER:
If you receive a UHID_FEATURE request you must answer with this request. You
must copy the "id" field from the request into the answer. Set the "err" field
......
drivers/hid/hid-ids.h
View file @ fa1054a2
......@@ -67,6 +67,9 @@
#define USB_VENDOR_ID_ALPS 0x0433
#define USB_DEVICE_ID_IBM_GAMEPAD 0x1101
#define USB_VENDOR_ID_ANTON 0x1130
#define USB_DEVICE_ID_ANTON_TOUCH_PAD 0x3101
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
#define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d
......
drivers/hid/hid-multitouch.c
View file @ fa1054a2
......@@ -68,6 +68,9 @@ MODULE_LICENSE("GPL");
#define MT_QUIRK_HOVERING (1 << 11)
#define MT_QUIRK_CONTACT_CNT_ACCURATE (1 << 12)
#define MT_INPUTMODE_TOUCHSCREEN 0x02
#define MT_INPUTMODE_TOUCHPAD 0x03
struct mt_slot {
__s32 x, y, cx, cy, p, w, h;
__s32 contactid; /* the device ContactID assigned to this slot */
......@@ -84,6 +87,7 @@ struct mt_class {
__s32 sn_pressure; /* Signal/noise ratio for pressure events */
__u8 maxcontacts;
bool is_indirect; /* true for touchpads */
bool export_all_inputs; /* do not ignore mouse, keyboards, etc... */
};
struct mt_fields {
......@@ -100,11 +104,11 @@ struct mt_device {
int cc_value_index; /* contact count value index in the field */
unsigned last_slot_field; /* the last field of a slot */
unsigned mt_report_id; /* the report ID of the multitouch device */
unsigned pen_report_id; /* the report ID of the pen device */
__s16 inputmode; /* InputMode HID feature, -1 if non-existent */
__s16 inputmode_index; /* InputMode HID feature index in the report */
__s16 maxcontact_report_id; /* Maximum Contact Number HID feature,
-1 if non-existent */
__u8 inputmode_value; /* InputMode HID feature value */
__u8 num_received; /* how many contacts we received */
__u8 num_expected; /* expected last contact index */
__u8 maxcontacts;
......@@ -128,16 +132,17 @@ static void mt_post_parse(struct mt_device *td);
#define MT_CLS_CONFIDENCE_MINUS_ONE 0x0005
#define MT_CLS_DUAL_INRANGE_CONTACTID 0x0006
#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 0x0007
#define MT_CLS_DUAL_NSMU_CONTACTID 0x0008
/* reserved 0x0008 */
#define MT_CLS_INRANGE_CONTACTNUMBER 0x0009
#define MT_CLS_NSMU 0x000a
#define MT_CLS_DUAL_CONTACT_NUMBER 0x0010
#define MT_CLS_DUAL_CONTACT_ID 0x0011
/* reserved 0x0010 */
/* reserved 0x0011 */
#define MT_CLS_WIN_8 0x0012
#define MT_CLS_EXPORT_ALL_INPUTS 0x0013
/* vendor specific classes */
#define MT_CLS_3M 0x0101
#define MT_CLS_CYPRESS 0x0102
/* reserved 0x0102 */
#define MT_CLS_EGALAX 0x0103
#define MT_CLS_EGALAX_SERIAL 0x0104
#define MT_CLS_TOPSEED 0x0105
......@@ -189,28 +194,18 @@ static struct mt_class mt_classes[] = {
.quirks = MT_QUIRK_VALID_IS_INRANGE |
MT_QUIRK_SLOT_IS_CONTACTNUMBER,
.maxcontacts = 2 },
{ .name = MT_CLS_DUAL_NSMU_CONTACTID,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
MT_QUIRK_SLOT_IS_CONTACTID,
.maxcontacts = 2 },
{ .name = MT_CLS_INRANGE_CONTACTNUMBER,
.quirks = MT_QUIRK_VALID_IS_INRANGE |
MT_QUIRK_SLOT_IS_CONTACTNUMBER },
{ .name = MT_CLS_DUAL_CONTACT_NUMBER,
.quirks = MT_QUIRK_ALWAYS_VALID |
MT_QUIRK_CONTACT_CNT_ACCURATE |
MT_QUIRK_SLOT_IS_CONTACTNUMBER,
.maxcontacts = 2 },
{ .name = MT_CLS_DUAL_CONTACT_ID,
.quirks = MT_QUIRK_ALWAYS_VALID |
MT_QUIRK_CONTACT_CNT_ACCURATE |
MT_QUIRK_SLOT_IS_CONTACTID,
.maxcontacts = 2 },
{ .name = MT_CLS_WIN_8,
.quirks = MT_QUIRK_ALWAYS_VALID |
MT_QUIRK_IGNORE_DUPLICATES |
MT_QUIRK_HOVERING |
MT_QUIRK_CONTACT_CNT_ACCURATE },
{ .name = MT_CLS_EXPORT_ALL_INPUTS,
.quirks = MT_QUIRK_ALWAYS_VALID |
MT_QUIRK_CONTACT_CNT_ACCURATE,
.export_all_inputs = true },
/*
* vendor specific classes
......@@ -223,10 +218,6 @@ static struct mt_class mt_classes[] = {
.sn_height = 128,
.maxcontacts = 60,
},
{ .name = MT_CLS_CYPRESS,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
MT_QUIRK_CYPRESS,
.maxcontacts = 10 },
{ .name = MT_CLS_EGALAX,
.quirks = MT_QUIRK_SLOT_IS_CONTACTID |
MT_QUIRK_VALID_IS_INRANGE,
......@@ -360,45 +351,6 @@ static void mt_store_field(struct hid_usage *usage, struct mt_device *td,
f->usages[f->length++] = usage->hid;
}
static int mt_pen_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
struct mt_device *td = hid_get_drvdata(hdev);
td->pen_report_id = field->report->id;
return 0;
}
static int mt_pen_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
return 0;
}
static int mt_pen_event(struct hid_device *hid, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
/* let hid-input handle it */
return 0;
}
static void mt_pen_report(struct hid_device *hid, struct hid_report *report)
{
struct hid_field *field = report->field[0];
input_sync(field->hidinput->input);
}
static void mt_pen_input_configured(struct hid_device *hdev,
struct hid_input *hi)
{
/* force BTN_STYLUS to allow tablet matching in udev */
__set_bit(BTN_STYLUS, hi->input->keybit);
}
static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
......@@ -415,8 +367,10 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
* Model touchscreens providing buttons as touchpads.
*/
if (field->application == HID_DG_TOUCHPAD ||
(usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)
(usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
td->mt_flags |= INPUT_MT_POINTER;
td->inputmode_value = MT_INPUTMODE_TOUCHPAD;
}
if (usage->usage_index)
prev_usage = &field->usage[usage->usage_index - 1];
......@@ -776,28 +730,52 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
/* Only map fields from TouchScreen or TouchPad collections.
* We need to ignore fields that belong to other collections
* such as Mouse that might have the same GenericDesktop usages. */
if (field->application != HID_DG_TOUCHSCREEN &&
struct mt_device *td = hid_get_drvdata(hdev);
/*
* If mtclass.export_all_inputs is not set, only map fields from
* TouchScreen or TouchPad collections. We need to ignore fields
* that belong to other collections such as Mouse that might have
* the same GenericDesktop usages.
*/
if (!td->mtclass.export_all_inputs &&
field->application != HID_DG_TOUCHSCREEN &&
field->application != HID_DG_PEN &&
field->application != HID_DG_TOUCHPAD)
return -1;
/*
* some egalax touchscreens have "application == HID_DG_TOUCHSCREEN"
* for the stylus.
*/
if (field->physical == HID_DG_STYLUS)
return mt_pen_input_mapping(hdev, hi, field, usage, bit, max);
return 0;
return mt_touch_input_mapping(hdev, hi, field, usage, bit, max);
if (field->application == HID_DG_TOUCHSCREEN ||
field->application == HID_DG_TOUCHPAD)
return mt_touch_input_mapping(hdev, hi, field, usage, bit, max);
/* let hid-core decide for the others */
return 0;
}
static int mt_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
/*
* some egalax touchscreens have "application == HID_DG_TOUCHSCREEN"
* for the stylus.
*/
if (field->physical == HID_DG_STYLUS)
return mt_pen_input_mapped(hdev, hi, field, usage, bit, max);
return 0;
return mt_touch_input_mapped(hdev, hi, field, usage, bit, max);
if (field->application == HID_DG_TOUCHSCREEN ||
field->application == HID_DG_TOUCHPAD)
return mt_touch_input_mapped(hdev, hi, field, usage, bit, max);
/* let hid-core decide for the others */
return 0;
}
static int mt_event(struct hid_device *hid, struct hid_field *field,
......@@ -808,25 +786,22 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
if (field->report->id == td->mt_report_id)
return mt_touch_event(hid, field, usage, value);
if (field->report->id == td->pen_report_id)
return mt_pen_event(hid, field, usage, value);
/* ignore other reports */
return 1;
return 0;
}
static void mt_report(struct hid_device *hid, struct hid_report *report)
{
struct mt_device *td = hid_get_drvdata(hid);
struct hid_field *field = report->field[0];
if (!(hid->claimed & HID_CLAIMED_INPUT))
return;
if (report->id == td->mt_report_id)
mt_touch_report(hid, report);
return mt_touch_report(hid, report);
if (report->id == td->pen_report_id)
mt_pen_report(hid, report);
if (field && field->hidinput && field->hidinput->input)
input_sync(field->hidinput->input);
}
static void mt_set_input_mode(struct hid_device *hdev)
......@@ -841,7 +816,7 @@ static void mt_set_input_mode(struct hid_device *hdev)
re = &(hdev->report_enum[HID_FEATURE_REPORT]);
r = re->report_id_hash[td->inputmode];
if (r) {
r->field[0]->value[td->inputmode_index] = 0x02;
r->field[0]->value[td->inputmode_index] = td->inputmode_value;
hid_hw_request(hdev, r, HID_REQ_SET_REPORT);
}
}
......@@ -907,13 +882,49 @@ static void mt_input_configured(struct hid_device *hdev, struct hid_input *hi)
struct mt_device *td = hid_get_drvdata(hdev);
char *name;
const char *suffix = NULL;
struct hid_field *field = hi->report->field[0];
if (hi->report->id == td->mt_report_id)
mt_touch_input_configured(hdev, hi);
/*
* some egalax touchscreens have "application == HID_DG_TOUCHSCREEN"
* for the stylus. Check this first, and then rely on the application
* field.
*/
if (hi->report->field[0]->physical == HID_DG_STYLUS) {
suffix = "Pen";
mt_pen_input_configured(hdev, hi);
/* force BTN_STYLUS to allow tablet matching in udev */
__set_bit(BTN_STYLUS, hi->input->keybit);
} else {
switch (field->application) {
case HID_GD_KEYBOARD:
suffix = "Keyboard";
break;
case HID_GD_KEYPAD:
suffix = "Keypad";
break;
case HID_GD_MOUSE:
suffix = "Mouse";
break;
case HID_DG_STYLUS:
suffix = "Pen";
/* force BTN_STYLUS to allow tablet matching in udev */
__set_bit(BTN_STYLUS, hi->input->keybit);
break;
case HID_DG_TOUCHSCREEN:
/* we do not set suffix = "Touchscreen" */
break;
case HID_GD_SYSTEM_CONTROL:
suffix = "System Control";
break;
case HID_CP_CONSUMER_CONTROL:
suffix = "Consumer Control";
break;
default:
suffix = "UNKNOWN";
break;
}
}
if (suffix) {
......@@ -973,9 +984,9 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
td->mtclass = *mtclass;
td->inputmode = -1;
td->maxcontact_report_id = -1;
td->inputmode_value = MT_INPUTMODE_TOUCHSCREEN;
td->cc_index = -1;
td->mt_report_id = -1;
td->pen_report_id = -1;
hid_set_drvdata(hdev, td);
td->fields = devm_kzalloc(&hdev->dev, sizeof(struct mt_fields),
......@@ -1034,6 +1045,12 @@ static void mt_remove(struct hid_device *hdev)
hid_hw_stop(hdev);
}
/*
* This list contains only:
* - VID/PID of products not working with the default multitouch handling
* - 2 generic rules.
* So there is no point in adding here any device with MT_CLS_DEFAULT.
*/
static const struct hid_device_id mt_devices[] = {
/* 3M panels */
......@@ -1047,15 +1064,12 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_3M,
USB_DEVICE_ID_3M3266) },
/* ActionStar panels */
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR,
USB_DEVICE_ID_ACTIONSTAR_1011) },
/* Anton devices */
{ .driver_data = MT_CLS_EXPORT_ALL_INPUTS,
MT_USB_DEVICE(USB_VENDOR_ID_ANTON,
USB_DEVICE_ID_ANTON_TOUCH_PAD) },
/* Atmel panels */
{ .driver_data = MT_CLS_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_ATMEL,
USB_DEVICE_ID_ATMEL_MULTITOUCH) },
{ .driver_data = MT_CLS_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_ATMEL,
USB_DEVICE_ID_ATMEL_MXT_DIGITIZER) },
......@@ -1064,16 +1078,11 @@ static const struct hid_device_id mt_devices[] = {
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_BAANTO,
USB_DEVICE_ID_BAANTO_MT_190W2) },
/* Cando panels */
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
{ .driver_data = MT_CLS_DUAL_CONTACT_NUMBER,
MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) },
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
......@@ -1088,16 +1097,6 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,
USB_DEVICE_ID_CVTOUCH_SCREEN) },
/* Cypress panel */
{ .driver_data = MT_CLS_CYPRESS,
HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS,
USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
/* Data Modul easyMaxTouch */
{ .driver_data = MT_CLS_DEFAULT,
MT_USB_DEVICE(USB_VENDOR_ID_DATA_MODUL,
USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH) },
/* eGalax devices (resistive) */
{ .driver_data = MT_CLS_EGALAX,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
......@@ -1156,11 +1155,6 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
/* Elo TouchSystems IntelliTouch Plus panel */
{ .driver_data = MT_CLS_DUAL_CONTACT_ID,
MT_USB_DEVICE(USB_VENDOR_ID_ELO,
USB_DEVICE_ID_ELO_TS2515) },
/* Flatfrog Panels */
{ .driver_data = MT_CLS_FLATFROG,
MT_USB_DEVICE(USB_VENDOR_ID_FLATFROG,
......@@ -1209,37 +1203,11 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT,
USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
/* Ideacom panel */
{ .driver_data = MT_CLS_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
USB_DEVICE_ID_IDEACOM_IDC6650) },
{ .driver_data = MT_CLS_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
USB_DEVICE_ID_IDEACOM_IDC6651) },
/* Ilitek dual touch panel */
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_ILITEK,
USB_DEVICE_ID_ILITEK_MULTITOUCH) },
/* IRTOUCH panels */
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
MT_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS,
USB_DEVICE_ID_IRTOUCH_INFRARED_USB) },
/* LG Display panels */
{ .driver_data = MT_CLS_DEFAULT,
MT_USB_DEVICE(USB_VENDOR_ID_LG,
USB_DEVICE_ID_LG_MULTITOUCH) },
/* Lumio panels */
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
MT_USB_DEVICE(USB_VENDOR_ID_LUMIO,
USB_DEVICE_ID_CRYSTALTOUCH) },
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
MT_USB_DEVICE(USB_VENDOR_ID_LUMIO,
USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
/* MosArt panels */
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
MT_USB_DEVICE(USB_VENDOR_ID_ASUS,
......@@ -1251,11 +1219,6 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_TURBOX,
USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
/* Nexio panels */
{ .driver_data = MT_CLS_DEFAULT,
MT_USB_DEVICE(USB_VENDOR_ID_NEXIO,
USB_DEVICE_ID_NEXIO_MULTITOUCH_420)},
/* Panasonic panels */
{ .driver_data = MT_CLS_PANASONIC,
MT_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
......@@ -1269,11 +1232,6 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_NOVATEK,
USB_DEVICE_ID_NOVATEK_PCT) },
/* PenMount panels */
{ .driver_data = MT_CLS_CONFIDENCE,
MT_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
USB_DEVICE_ID_PENMOUNT_PCI) },
/* PixArt optical touch screen */
{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
MT_USB_DEVICE(USB_VENDOR_ID_PIXART,
......@@ -1286,45 +1244,19 @@ static const struct hid_device_id mt_devices[] = {
USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
/* PixCir-based panels */
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
MT_USB_DEVICE(USB_VENDOR_ID_HANVON,
USB_DEVICE_ID_HANVON_MULTITOUCH) },
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) },
/* Quanta-based panels */
{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
MT_USB_DEVICE(USB_VENDOR_ID_QUANTA,
USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
MT_USB_DEVICE(USB_VENDOR_ID_QUANTA,
USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001) },
{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
MT_USB_DEVICE(USB_VENDOR_ID_QUANTA,
USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008) },
/* SiS panels */
{ .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_SIS_TOUCH,
USB_DEVICE_ID_SIS9200_TOUCH) },
{ .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_SIS_TOUCH,
USB_DEVICE_ID_SIS817_TOUCH) },
{ .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_SIS_TOUCH,
USB_DEVICE_ID_SIS1030_TOUCH) },
/* Stantum panels */
{ .driver_data = MT_CLS_CONFIDENCE,
MT_USB_DEVICE(USB_VENDOR_ID_STANTUM,
USB_DEVICE_ID_MTP)},
{ .driver_data = MT_CLS_CONFIDENCE,
MT_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
USB_DEVICE_ID_MTP_STM)},
{ .driver_data = MT_CLS_DEFAULT,
MT_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX,
USB_DEVICE_ID_MTP_SITRONIX)},
/* TopSeed panels */
{ .driver_data = MT_CLS_TOPSEED,
......@@ -1383,11 +1315,6 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
USB_DEVICE_ID_XIROKU_CSR2) },
/* Zytronic panels */
{ .driver_data = MT_CLS_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_ZYTRONIC,
USB_DEVICE_ID_ZYTRONIC_ZXY100) },
/* Generic MT device */
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
......
drivers/hid/hid-sony.c
View file @ fa1054a2
......@@ -863,7 +863,7 @@ static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size)
battery_capacity = sixaxis_battery_capacity[index];
battery_charging = 0;
}
cable_state = !((rd[31] >> 4) & 0x01);
cable_state = !(rd[31] & 0x04);
spin_lock_irqsave(&sc->lock, flags);
sc->cable_state = cable_state;
......@@ -1632,11 +1632,21 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, sixaxis_state_worker);
} else if (sc->quirks & SIXAXIS_CONTROLLER_BT) {
/*
* The Sixaxis wants output reports sent on the ctrl endpoint
* when connected via Bluetooth.
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
ret = sixaxis_set_operational_bt(hdev);
sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, sixaxis_state_worker);
} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
/*
* The DualShock 4 wants output reports sent on the ctrl
* endpoint when connected via Bluetooth.
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
ret = dualshock4_set_operational_bt(hdev);
if (ret < 0) {
hid_err(hdev, "failed to set the Dualshock 4 operational mode\n");
......
drivers/hid/uhid.c
View file @ fa1054a2
......@@ -428,6 +428,67 @@ static int uhid_dev_create(struct uhid_device *uhid,
return ret;
}
static int uhid_dev_create2(struct uhid_device *uhid,
const struct uhid_event *ev)
{
struct hid_device *hid;
int ret;
if (uhid->running)
return -EALREADY;
uhid->rd_size = ev->u.create2.rd_size;
if (uhid->rd_size <= 0 || uhid->rd_size > HID_MAX_DESCRIPTOR_SIZE)
return -EINVAL;
uhid->rd_data = kmalloc(uhid->rd_size, GFP_KERNEL);
if (!uhid->rd_data)
return -ENOMEM;
memcpy(uhid->rd_data, ev->u.create2.rd_data, uhid->rd_size);
hid = hid_allocate_device();
if (IS_ERR(hid)) {
ret = PTR_ERR(hid);
goto err_free;
}
strncpy(hid->name, ev->u.create2.name, 127);
hid->name[127] = 0;
strncpy(hid->phys, ev->u.create2.phys, 63);
hid->phys[63] = 0;
strncpy(hid->uniq, ev->u.create2.uniq, 63);
hid->uniq[63] = 0;
hid->ll_driver = &uhid_hid_driver;
hid->bus = ev->u.create2.bus;
hid->vendor = ev->u.create2.vendor;
hid->product = ev->u.create2.product;
hid->version = ev->u.create2.version;
hid->country = ev->u.create2.country;
hid->driver_data = uhid;
hid->dev.parent = uhid_misc.this_device;
uhid->hid = hid;
uhid->running = true;
ret = hid_add_device(hid);
if (ret) {
hid_err(hid, "Cannot register HID device\n");
goto err_hid;
}
return 0;
err_hid:
hid_destroy_device(hid);
uhid->hid = NULL;
uhid->running = false;
err_free:
kfree(uhid->rd_data);
return ret;
}
static int uhid_dev_destroy(struct uhid_device *uhid)
{
if (!uhid->running)
......@@ -456,6 +517,17 @@ static int uhid_dev_input(struct uhid_device *uhid, struct uhid_event *ev)
return 0;
}
static int uhid_dev_input2(struct uhid_device *uhid, struct uhid_event *ev)
{
if (!uhid->running)
return -EINVAL;
hid_input_report(uhid->hid, HID_INPUT_REPORT, ev->u.input2.data,
min_t(size_t, ev->u.input2.size, UHID_DATA_MAX), 0);
return 0;
}
static int uhid_dev_feature_answer(struct uhid_device *uhid,
struct uhid_event *ev)
{
......@@ -592,12 +664,18 @@ static ssize_t uhid_char_write(struct file *file, const char __user *buffer,
case UHID_CREATE:
ret = uhid_dev_create(uhid, &uhid->input_buf);
break;
case UHID_CREATE2:
ret = uhid_dev_create2(uhid, &uhid->input_buf);
break;
case UHID_DESTROY:
ret = uhid_dev_destroy(uhid);
break;
case UHID_INPUT:
ret = uhid_dev_input(uhid, &uhid->input_buf);
break;
case UHID_INPUT2:
ret = uhid_dev_input2(uhid, &uhid->input_buf);
break;
case UHID_FEATURE_ANSWER:
ret = uhid_dev_feature_answer(uhid, &uhid->input_buf);
break;
......
include/linux/hid.h
View file @ fa1054a2
......@@ -201,6 +201,7 @@ struct hid_item {
#define HID_GD_VBRZ 0x00010045
#define HID_GD_VNO 0x00010046
#define HID_GD_FEATURE 0x00010047
#define HID_GD_SYSTEM_CONTROL 0x00010080
#define HID_GD_UP 0x00010090
#define HID_GD_DOWN 0x00010091
#define HID_GD_RIGHT 0x00010092
......@@ -208,6 +209,8 @@ struct hid_item {
#define HID_DC_BATTERYSTRENGTH 0x00060020
#define HID_CP_CONSUMER_CONTROL 0x000c0001
#define HID_DG_DIGITIZER 0x000d0001
#define HID_DG_PEN 0x000d0002
#define HID_DG_LIGHTPEN 0x000d0003
......
include/uapi/linux/uhid.h
View file @ fa1054a2
......@@ -21,6 +21,7 @@
#include <linux/input.h>
#include <linux/types.h>
#include <linux/hid.h>
enum uhid_event_type {
UHID_CREATE,
......@@ -34,6 +35,8 @@ enum uhid_event_type {
UHID_INPUT,
UHID_FEATURE,
UHID_FEATURE_ANSWER,
UHID_CREATE2,
UHID_INPUT2,
};
struct uhid_create_req {
......@@ -50,6 +53,19 @@ struct uhid_create_req {
__u32 country;
} __attribute__((__packed__));
struct uhid_create2_req {
__u8 name[128];
__u8 phys[64];
__u8 uniq[64];
__u16 rd_size;
__u16 bus;
__u32 vendor;
__u32 product;
__u32 version;
__u32 country;
__u8 rd_data[HID_MAX_DESCRIPTOR_SIZE];
} __attribute__((__packed__));
#define UHID_DATA_MAX 4096
enum uhid_report_type {
......@@ -63,6 +79,11 @@ struct uhid_input_req {
__u16 size;
} __attribute__((__packed__));
struct uhid_input2_req {
__u16 size;
__u8 data[UHID_DATA_MAX];
} __attribute__((__packed__));
struct uhid_output_req {
__u8 data[UHID_DATA_MAX];
__u16 size;
......@@ -100,6 +121,8 @@ struct uhid_event {
struct uhid_output_ev_req output_ev;
struct uhid_feature_req feature;
struct uhid_feature_answer_req feature_answer;
struct uhid_create2_req create2;
struct uhid_input2_req input2;
} u;
} __attribute__((__packed__));
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7