Merge tag 'sunxi-fixes-for-4.13-3' of...

Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes

Allwinner fixes for 4.13, take 3

This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet

* tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm: dts: sunxi: Revert EMAC changes
  arm64: dts: allwinner: Revert EMAC changes
  dt-bindings: net: Revert sun8i dwmac binding
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/net/dwmac-sun8i.txt

-* Allwinner sun8i GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
-- compatible: should be one of the following string:
-		"allwinner,sun8i-a83t-emac"
-		"allwinner,sun8i-h3-emac"
-		"allwinner,sun8i-v3s-emac"
-		"allwinner,sun50i-a64-emac"
-- reg: address and length of the register for the device.
-- interrupts: interrupt for the device
-- interrupt-names: should be "macirq"
-- clocks: A phandle to the reference clock for this device
-- clock-names: should be "stmmaceth"
-- resets: A phandle to the reset control for this device
-- reset-names: should be "stmmaceth"
-- phy-mode: See ethernet.txt
-- phy-handle: See ethernet.txt
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-- syscon: A phandle to the syscon of the SoC with one of the following
- compatible string:
-  - allwinner,sun8i-h3-system-controller
-  - allwinner,sun8i-v3s-system-controller
-  - allwinner,sun50i-a64-system-controller
-  - allwinner,sun8i-a83t-system-controller
-
-Optional properties:
-- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
-- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
-Both delay properties need to be a multiple of 100. They control the delay for
-external PHY.
-
-Optional properties for the following compatibles:
-  - "allwinner,sun8i-h3-emac",
-  - "allwinner,sun8i-v3s-emac":
-- allwinner,leds-active-low: EPHY LEDs are active low
-
-Required child node of emac:
-- mdio bus node: should be named mdio
-
-Required properties of the mdio node:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-The device node referenced by "phy" or "phy-handle" should be a child node
-of the mdio node. See phy.txt for the generic PHY bindings.
-
-Required properties of the phy node with the following compatibles:
-  - "allwinner,sun8i-h3-emac",
-  - "allwinner,sun8i-v3s-emac":
-- clocks: a phandle to the reference clock for the EPHY
-- resets: a phandle to the reset control for the EPHY
-
-Example:
-
-emac: ethernet@1c0b000 {
-	compatible = "allwinner,sun8i-h3-emac";
-	syscon = <&syscon>;
-	reg = <0x01c0b000 0x104>;
-	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "macirq";
-	resets = <&ccu RST_BUS_EMAC>;
-	reset-names = "stmmaceth";
-	clocks = <&ccu CLK_BUS_EMAC>;
-	clock-names = "stmmaceth";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		int_mii_phy: ethernet-phy@1 {
-			reg = <1>;
-			clocks = <&ccu CLK_BUS_EPHY>;
-			resets = <&ccu RST_BUS_EPHY>;
-		};
-	};
-};

arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts

@@ -56,8 +56,6 @@ / {
 
 	aliases {
 		serial0 = &uart0;
-		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-		ethernet0 = &emac;
 		ethernet1 = &xr819;
 	};
 
@@ -104,13 +102,6 @@ &ehci1 {
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>;

arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts

@@ -52,7 +52,6 @@ / {
 	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -115,30 +114,12 @@ &ehci2 {
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;

arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts

@@ -46,10 +46,3 @@ / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
 };
-
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};

arch/arm/boot/dts/sun8i-h3-orangepi-2.dts

@@ -54,7 +54,6 @@ / {
 	aliases {
 		serial0 = &uart0;
 		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-		ethernet0 = &emac;
 		ethernet1 = &rtl8189;
 	};
 
@@ -118,13 +117,6 @@ &ehci1 {
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;

arch/arm/boot/dts/sun8i-h3-orangepi-one.dts

@@ -52,7 +52,6 @@ / {
 	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -98,13 +97,6 @@ &ehci1 {
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;

arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts

@@ -53,11 +53,6 @@ aliases {
 	};
 };
 
-&emac {
-	/* LEDs changed to active high on the plus */
-	/delete-property/ allwinner,leds-active-low;
-};
-
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_a>;

arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts

@@ -52,7 +52,6 @@ / {
 	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -114,13 +113,6 @@ &ehci3 {
 	status = "okay";
 };
 
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;

arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts

@@ -47,10 +47,6 @@ / {
 	model = "Xunlong Orange Pi Plus / Plus 2";
 	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
-	aliases {
-		ethernet0 = &emac;
-	};
-
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "gmac-3v3";
@@ -78,24 +74,6 @@ &ehci3 {
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;

arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts

@@ -61,19 +61,3 @@ reg_gmac_3v3: gmac-3v3 {
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
 	};
 };
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};

arch/arm/boot/dts/sunxi-h3-h5.dtsi

@@ -391,32 +391,6 @@ timer@01c20c00 {
 			clocks = <&osc24M>;
 		};
 
-		emac: ethernet@1c30000 {
-			compatible = "allwinner,sun8i-h3-emac";
-			syscon = <&syscon>;
-			reg = <0x01c30000 0x10000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			resets = <&ccu RST_BUS_EMAC>;
-			reset-names = "stmmaceth";
-			clocks = <&ccu CLK_BUS_EMAC>;
-			clock-names = "stmmaceth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			mdio: mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				int_mii_phy: ethernet-phy@1 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <1>;
-					clocks = <&ccu CLK_BUS_EPHY>;
-					resets = <&ccu RST_BUS_EPHY>;
-				};
-			};
-		};
-
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;

arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts

@@ -51,7 +51,6 @@ / {
 	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -68,14 +67,6 @@ reg_vcc3v3: vcc3v3 {
 	};
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
-	status = "okay";
-};
-
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -86,13 +77,6 @@ &i2c1_pins {
 	bias-pull-up;
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts

@@ -48,18 +48,3 @@ / {
 
 	/* TODO: Camera, touchscreen, etc. */
 };
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts

@@ -51,7 +51,6 @@ / {
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -79,15 +78,6 @@ &ehci1 {
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rmii_pins>;
-	phy-mode = "rmii";
-	phy-handle = <&ext_rmii_phy1>;
-	status = "okay";
-
-};
-
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -98,13 +88,6 @@ &i2c1_pins {
 	bias-pull-up;
 };
 
-&mdio {
-	ext_rmii_phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts

@@ -53,7 +53,6 @@ / {
 		     "allwinner,sun50i-a64";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -77,21 +76,6 @@ &ehci1 {
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -449,26 +449,6 @@ i2c2: i2c@1c2b400 {
 			#size-cells = <0>;
 		};
 
-		emac: ethernet@1c30000 {
-			compatible = "allwinner,sun50i-a64-emac";
-			syscon = <&syscon>;
-			reg = <0x01c30000 0x10000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			resets = <&ccu RST_BUS_EMAC>;
-			reset-names = "stmmaceth";
-			clocks = <&ccu CLK_BUS_EMAC>;
-			clock-names = "stmmaceth";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mdio: mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts

@@ -50,7 +50,6 @@ / {
 	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -109,22 +108,6 @@ &ehci3 {
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&mdio {
-	ext_rgmii_phy: ethernet-phy@7 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts

@@ -59,7 +59,6 @@ reg_vcc3v3: vcc3v3 {
 	};
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -137,28 +136,12 @@ &ehci3 {
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts

@@ -54,7 +54,6 @@ / {
 	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
 
 	aliases {
-		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -144,28 +143,12 @@ &ehci3 {
 	status = "okay";
 };
 
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;