Commit fac515db authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt

Merge remote-tracking branch 'scott/next' into next

Freescale updates from Scott:

<<
Highlights include 32-bit booke relocatable support, e6500 hardware
tablewalk support, various e500 SPE fixes, some new/revived boards, and
e6500 deeper idle and altivec powerdown modes.
>>
parents 3ac8ff1c d064f30e
* Solomon SSD1289 Framebuffer Driver
Required properties:
- compatible: Should be "solomon,ssd1289fb". The only supported bus for
now is lbc.
- reg: Should contain address of the controller on the LBC bus. The detail
was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
Examples:
display@2,0 {
compatible = "solomon,ssd1289fb";
reg = <0x2 0x0000 0x0004>;
};
......@@ -402,8 +402,7 @@ config KEXEC
config CRASH_DUMP
bool "Build a kdump crash kernel"
depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
select RELOCATABLE if PPC64 || 44x
select DYNAMIC_MEMSTART if FSL_BOOKE
select RELOCATABLE if PPC64 || 44x || FSL_BOOKE
help
Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump
......@@ -884,7 +883,7 @@ config DYNAMIC_MEMSTART
config RELOCATABLE
bool "Build a relocatable kernel"
depends on ADVANCED_OPTIONS && FLATMEM && 44x
depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE)
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running at the
......
......@@ -71,9 +71,9 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
uartlite.c mpc52xx-psc.c
src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c
src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c
src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
src-plat-y := of.c epapr.c
src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
......@@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
cuboot-c2k.c gamecube-head.S \
gamecube.c wii-head.S wii.c holly.c \
prpmc2800.c
prpmc2800.c fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
......@@ -286,6 +286,7 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
image-$(CONFIG_MVME5100) += dtbImage.mvme5100
# Board port in arch/powerpc/platform/amigaone/Kconfig
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
......
/*
* QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
dma2: dma@102300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elo3-dma";
reg = <0x102300 0x4>,
<0x102600 0x4>;
ranges = <0x0 0x102100 0x500>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
interrupts = <464 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
interrupts = <465 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
interrupts = <466 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
interrupts = <467 2 0 0>;
};
dma-channel@300 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x300 0x80>;
interrupts = <468 2 0 0>;
};
dma-channel@380 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x380 0x80>;
interrupts = <469 2 0 0>;
};
dma-channel@400 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x400 0x80>;
interrupts = <470 2 0 0>;
};
dma-channel@480 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x480 0x80>;
interrupts = <471 2 0 0>;
};
};
......@@ -36,7 +36,8 @@ &lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
interrupts = <19 2 0 0>,
<16 2 0 0>;
};
/* controller at 0x9000 */
......
......@@ -36,7 +36,8 @@ &lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
interrupts = <19 2 0 0>,
<16 2 0 0>;
};
/* controller at 0x9000 */
......
......@@ -40,7 +40,8 @@ &lbc {
* pin muxing when the DIU is enabled.
*/
compatible = "fsl,p1022-elbc", "fsl,elbc";
interrupts = <19 2 0 0>;
interrupts = <19 2 0 0>,
<16 2 0 0>;
};
/* controller at 0x9000 */
......
......@@ -36,7 +36,8 @@ &lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
interrupts = <19 2 0 0>,
<16 2 0 0>;
};
/* controller at 0xa000 */
......
/*
* Device Tree Source for Motorola/Emerson MVME5100.
*
* Copyright 2013 CSC Australia Pty. Ltd.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/ {
model = "MVME5100";
compatible = "MVME5100";
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &serial0;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,7410 {
device_type = "cpu";
reg = <0x0>;
/* Following required by dtc but not used */
d-cache-line-size = <32>;
i-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
timebase-frequency = <25000000>;
clock-frequency = <500000000>;
bus-frequency = <100000000>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x20000000>;
};
hawk@fef80000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "hawk-bridge", "simple-bus";
ranges = <0x0 0xfef80000 0x10000>;
reg = <0xfef80000 0x10000>;
serial0: serial@8000 {
device_type = "serial";
compatible = "ns16550";
reg = <0x8000 0x80>;
reg-shift = <4>;
clock-frequency = <1843200>;
current-speed = <9600>;
interrupts = <1 1>; // IRQ1 Level Active Low.
interrupt-parent = <&mpic>;
};
serial1: serial@8200 {
device_type = "serial";
compatible = "ns16550";
reg = <0x8200 0x80>;
reg-shift = <4>;
clock-frequency = <1843200>;
current-speed = <9600>;
interrupts = <1 1>; // IRQ1 Level Active Low.
interrupt-parent = <&mpic>;
};
mpic: interrupt-controller@f3f80000 {
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
reg = <0xf3f80000 0x40000>;
};
};
pci0: pci@feff0000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "hawk-pci";
reg = <0xfec00000 0x400000>;
8259-interrupt-acknowledge = <0xfeff0030>;
ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000
0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/*
* This definition (IDSEL 11) duplicates the
* interrupts definition in the i8259
* interrupt controller below.
*
* Do not change the interrupt sense/polarity from
* 0x2 to anything else, doing so will cause endless
* "spurious" i8259 interrupts to be fielded.
*/
// IDSEL 11 - iPMC712 PCI/ISA Bridge
0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
/* IDSEL 12 - Not Used */
/* IDSEL 13 - Universe VME Bridge */
0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
/* IDSEL 14 - ENET 1 */
0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
/* IDSEL 15 - Not Used */
/* IDSEL 16 - PMC Slot 1 */
0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
/* IDSEL 17 - PMC Slot 2 */
0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
/* IDSEL 18 - Not Used */
/* IDSEL 19 - ENET 2 */
0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
/* IDSEL 20 - PMCSPAN (PCI-X) */
0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
>;
isa {
#address-cells = <2>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "isa";
compatible = "isa";
ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
#interrupt-cells = <2>;
#address-cells = <0>;
interrupts = <0 2>;
device_type = "interrupt-controller";
compatible = "chrp,iic";
interrupt-controller;
reg = <1 0x00000020 0x00000002
1 0x000000a0 0x00000002
1 0x000004d0 0x00000002>;
interrupt-parent = <&mpic>;
};
};
};
chosen {
linux,stdout-path = &serial0;
};
};
......@@ -15,52 +15,9 @@ / {
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
memory {
device_type = "memory";
};
board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
reg = <0x0 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
/include/ "p1010rdb_32b.dtsi"
};
/include/ "p1010rdb.dtsi"
/include/ "p1010rdb-pa.dtsi"
/include/ "fsl/p1010si-post.dtsi"
/*
* P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&ifc_nand {
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00f00000>;
label = "NAND JFFS2 Root File System";
};
partition@1900000 {
/* 7MB for User Area */
reg = <0x01900000 0x00700000>;
label = "NAND User area";
};
};
&phy0 {
interrupts = <1 1 0 0>;
};
&phy1 {
interrupts = <2 1 0 0>;
};
&phy2 {
interrupts = <4 1 0 0>;
};
......@@ -38,52 +38,9 @@ / {
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
memory {
device_type = "memory";
};
board_ifc: ifc: ifc@fffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0xf 0xee000000 0x02000000
0x1 0x0 0xf 0xff800000 0x00010000
0x3 0x0 0xf 0xffb00000 0x00000020>;
reg = <0xf 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
/include/ "p1010rdb_36b.dtsi"
};
/include/ "p1010rdb.dtsi"
/include/ "p1010rdb-pa.dtsi"
/include/ "fsl/p1010si-post.dtsi"
/*
* P1010 RDB Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB-PB";
compatible = "fsl,P1010RDB-PB";
/include/ "p1010rdb_32b.dtsi"
};
/include/ "p1010rdb.dtsi"
&phy0 {
interrupts = <0 1 0 0>;
};
&phy1 {
interrupts = <2 1 0 0>;
};
&phy2 {
interrupts = <1 1 0 0>;
};
/include/ "fsl/p1010si-post.dtsi"
/*
* P1010 RDB Device Tree Source (36-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB-PB";
compatible = "fsl,P1010RDB-PB";
/include/ "p1010rdb_36b.dtsi"
};
/include/ "p1010rdb.dtsi"
&phy0 {
interrupts = <0 1 0 0>;
};
&phy1 {
interrupts = <2 1 0 0>;
};
&phy2 {
interrupts = <1 1 0 0>;
};
/include/ "fsl/p1010si-post.dtsi"
......@@ -69,49 +69,11 @@ partition@1f00000 {
};
};
nand@1,0 {
ifc_nand: nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00f00000>;
label = "NAND JFFS2 Root File System";
};
partition@1900000 {
/* 7MB for User Area */
reg = <0x01900000 0x00700000>;
label = "NAND User area";
};
};
cpld@3,0 {
......@@ -193,17 +155,14 @@ usb@22000 {
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x0>;
};
phy2: ethernet-phy@2 {
interrupts = <2 1 0 0>;
reg = <0x2>;
};
......
/*
* P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
memory {
device_type = "memory";
};
board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
reg = <0x0 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
/*
* P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
memory {
device_type = "memory";
};
board_ifc: ifc: ifc@fffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0xf 0xee000000 0x02000000
0x1 0x0 0xf 0xff800000 0x00010000
0x3 0x0 0xf 0xffb00000 0x00000020>;
reg = <0xf 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
......@@ -146,8 +146,9 @@ wm8776:codec@1a {
*/
};
rtc@68 {
compatible = "dallas,ds1339";
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
adt7461@4c {
compatible = "adi,adt7461";
......
/*
* P1025 TWR Device Tree Source (32-bit address map)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1025";
compatible = "fsl,TWR-P1025";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR Flash and SSD1289 */
ranges = <0x0 0x0 0x0 0xec000000 0x04000000
0x2 0x0 0x0 0xe0000000 0x00020000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
};
};
/include/ "p1025twr.dtsi"
/include/ "fsl/p1021si-post.dtsi"
/*
* P1025 TWR Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/{
aliases {
ethernet3 = &enet3;
ethernet4 = &enet4;
};
};
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x4000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 5.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00580000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 56.75MB for Root file System */
reg = <0x00600000 0x038c0000>;
label = "NOR Root File System";
};
partition@ec0000 {
/* This location must not be altered */
/* 256KB for QE ucode firmware*/
reg = <0x03ec0000 0x00040000>;
label = "NOR QE microcode firmware";
read-only;
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x03f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
/* CS2 for Display */
display@2,0 {
compatible = "solomon,ssd1289fb";
reg = <0x2 0x0000 0x0004>;
};
};
&soc {
usb@22000 {
phy_type = "ulpi";
};
mdio@24000 {
phy0: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1 0 0>;
reg = <0x2>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26000 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
status = "disabled";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
par_io@e0100 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe0100 0x60>;
ranges = <0x0 0xe0100 0x60>;
device_type = "par_io";
num-ports = <3>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
pio3: ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/
0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/
0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/
0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/
0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/
};
pio4: ucc_pin@04 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/
0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/
0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/
0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/
0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/
};
};
};
&qe {
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
rx-clock-name = "clk12";
tx-clock-name = "clk9";
pio-handle = <&pio1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "mii";
};
mdio@2120 {
qe_phy0: ethernet-phy@18 {
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x18>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@19 {
interrupt-parent = <&mpic>;
interrupts = <5 1 0 0>;
reg = <0x19>;
device_type = "ethernet-phy";
};
tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
rx-clock-name = "none";
tx-clock-name = "clk13";
pio-handle = <&pio2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
serial2: ucc@2600 {
device_type = "serial";
compatible = "ucc_uart";
port-number = <0>;
rx-clock-name = "brg6";
tx-clock-name = "brg6";
pio-handle = <&pio3>;
};
serial3: ucc@2200 {
device_type = "serial";
compatible = "ucc_uart";
port-number = <1>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
pio-handle = <&pio4>;
};
};
/*
* Motorola/Emerson MVME5100 with PPCBug firmware.
*
* Author: Stephen Chivers <schivers@csc.com>
*
* Copyright 2013 CSC Australia Pty. Ltd.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
#include "types.h"
#include "ops.h"
#include "io.h"
BSS_STACK(4096);
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
{
u32 heapsize;
heapsize = 0x8000000 - (u32)_end; /* 128M */
simple_alloc_init(_end, heapsize, 32, 64);
fdt_init(_dtb_start);
serial_console_init();
}
......@@ -265,6 +265,10 @@ epapr)
link_address='0x20000000'
pie=-pie
;;
mvme5100)
platformo="$object/fixed-head.o $object/mvme5100.o"
binary=y
;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
......
CONFIG_PPC_85xx=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_RCU_FANOUT=32
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_PHYSICAL_START=0x00000000
CONFIG_P1023_RDB=y
CONFIG_P1023_RDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_HIGHMEM=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_SWIOTLB=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCI_MSI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_INET_ESP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_LOGGING=y
CONFIG_ATA=y
CONFIG_SATA_FSL=y
CONFIG_SATA_SIL24=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_FS_ENET=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_E1000E=y
CONFIG_PHYLIB=y
CONFIG_AT803X_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
CONFIG_STAGING=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_CRC_T10DIF=y
CONFIG_FRAME_WARN=8092
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
CONFIG_STRICT_DEVMEM=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
......@@ -70,3 +70,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRC32_SLICEBY4=y
......@@ -72,3 +72,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRC32_SLICEBY4=y
......@@ -31,6 +31,7 @@ CONFIG_C293_PCIE=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
CONFIG_P1023_RDB=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
......@@ -113,6 +114,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
......@@ -211,6 +213,7 @@ CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
......
......@@ -34,6 +34,7 @@ CONFIG_C293_PCIE=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y
CONFIG_P1023_RDB=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
......@@ -116,6 +117,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
......@@ -212,6 +214,7 @@ CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
......
......@@ -55,3 +55,4 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_CRC_CCITT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC32_SLICEBY4=y
......@@ -78,3 +78,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRC32_SLICEBY4=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_MVME5100=y
CONFIG_KVM_GUEST=y
CONFIG_HZ_100=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_LAPB=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_EEPROM_LEGACY=m
CONFIG_NETDEVICES=y
CONFIG_TUN=m
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_E100=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=10
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_VME_BUS=m
CONFIG_VME_CA91CX42=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_XFS_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_CIFS=m
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
......@@ -84,3 +84,4 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRC32_SLICEBY4=y
......@@ -285,7 +285,7 @@ struct fsl_lbc_ctrl {
/* device info */
struct device *dev;
struct fsl_lbc_regs __iomem *regs;
int irq;
int irq[2];
wait_queue_head_t irq_wait;
spinlock_t lock;
void *nand;
......
......@@ -74,6 +74,7 @@
#define BOOKE_INTERRUPT_GUEST_DBELL_CRIT 39
#define BOOKE_INTERRUPT_HV_SYSCALL 40
#define BOOKE_INTERRUPT_HV_PRIV 41
#define BOOKE_INTERRUPT_LRAT_ERROR 42
/* book3s */
......
......@@ -286,8 +286,21 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
extern int mmu_linear_psize;
extern int mmu_vmemmap_psize;
struct tlb_core_data {
/* For software way selection, as on Freescale TLB1 */
u8 esel_next, esel_max, esel_first;
/* Per-core spinlock for e6500 TLB handlers (no tlbsrx.) */
u8 lock;
};
#ifdef CONFIG_PPC64
extern unsigned long linear_map_top;
extern int book3e_htw_mode;
#define PPC_HTW_NONE 0
#define PPC_HTW_IBM 1
#define PPC_HTW_E6500 2
/*
* 64-bit booke platforms don't load the tlb in the tlb miss handler code.
......
......@@ -180,16 +180,17 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
#define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */
#define MMU_PAGE_256K 4
#define MMU_PAGE_1M 5
#define MMU_PAGE_4M 6
#define MMU_PAGE_8M 7
#define MMU_PAGE_16M 8
#define MMU_PAGE_64M 9
#define MMU_PAGE_256M 10
#define MMU_PAGE_1G 11
#define MMU_PAGE_16G 12
#define MMU_PAGE_64G 13
#define MMU_PAGE_COUNT 14
#define MMU_PAGE_2M 6
#define MMU_PAGE_4M 7
#define MMU_PAGE_8M 8
#define MMU_PAGE_16M 9
#define MMU_PAGE_64M 10
#define MMU_PAGE_256M 11
#define MMU_PAGE_1G 12
#define MMU_PAGE_16G 13
#define MMU_PAGE_64G 14
#define MMU_PAGE_COUNT 15
#if defined(CONFIG_PPC_STD_MMU_64)
/* 64-bit classic hash table MMU */
......
......@@ -112,6 +112,10 @@ struct paca_struct {
/* Keep pgd in the same cacheline as the start of extlb */
pgd_t *pgd __attribute__((aligned(0x80))); /* Current PGD */
pgd_t *kernel_pgd; /* Kernel PGD */
/* Shared by all threads of a core -- points to tcd of first thread */
struct tlb_core_data *tcd_ptr;
/* We can have up to 3 levels of reentrancy in the TLB miss handler */
u64 extlb[3][EX_TLB_SIZE / sizeof(u64)];
u64 exmc[8]; /* used for machine checks */
......@@ -122,6 +126,8 @@ struct paca_struct {
void *mc_kstack;
void *crit_kstack;
void *dbg_kstack;
struct tlb_core_data tcd;
#endif /* CONFIG_PPC_BOOK3E */
mm_context_t context;
......
......@@ -294,6 +294,11 @@ GLUE(.,name):
* you want to access various offsets within it). On ppc32 this is
* identical to LOAD_REG_IMMEDIATE.
*
* LOAD_REG_ADDR_PIC(rn, name)
* Loads the address of label 'name' into register 'run'. Use this when
* the kernel doesn't run at the linked or relocated address. Please
* note that this macro will clobber the lr register.
*
* LOAD_REG_ADDRBASE(rn, name)
* ADDROFF(name)
* LOAD_REG_ADDRBASE loads part of the address of label 'name' into
......@@ -304,6 +309,14 @@ GLUE(.,name):
* LOAD_REG_ADDRBASE(rX, name)
* ld rY,ADDROFF(name)(rX)
*/
/* Be careful, this will clobber the lr register. */
#define LOAD_REG_ADDR_PIC(reg, name) \
bl 0f; \
0: mflr reg; \
addis reg,reg,(name - 0b)@ha; \
addi reg,reg,(name - 0b)@l;
#ifdef __powerpc64__
#define LOAD_REG_IMMEDIATE(reg,expr) \
lis reg,(expr)@highest; \
......
......@@ -256,6 +256,8 @@ struct thread_struct {
unsigned long evr[32]; /* upper 32-bits of SPE regs */
u64 acc; /* Accumulator */
unsigned long spefscr; /* SPE & eFP status */
unsigned long spefscr_last; /* SPEFSCR value on last prctl
call or trap return */
int used_spe; /* set if process has used spe */
#endif /* CONFIG_SPE */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
......@@ -317,7 +319,9 @@ struct thread_struct {
(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
#ifdef CONFIG_SPE
#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
#define SPEFSCR_INIT \
.spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, \
.spefscr_last = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
#else
#define SPEFSCR_INIT
#endif
......
......@@ -1075,6 +1075,8 @@
#define PVR_8560 0x80200000
#define PVR_VER_E500V1 0x8020
#define PVR_VER_E500V2 0x8021
#define PVR_VER_E6500 0x8040
/*
* For the 8xx processors, all of them report the same PVR family for
* the PowerPC core. The various versions of these processors must be
......
......@@ -101,6 +101,7 @@
#define SPRN_IVOR39 0x1B1 /* Interrupt Vector Offset Register 39 */
#define SPRN_IVOR40 0x1B2 /* Interrupt Vector Offset Register 40 */
#define SPRN_IVOR41 0x1B3 /* Interrupt Vector Offset Register 41 */
#define SPRN_IVOR42 0x1B4 /* Interrupt Vector Offset Register 42 */
#define SPRN_GIVOR2 0x1B8 /* Guest IVOR2 */
#define SPRN_GIVOR3 0x1B9 /* Guest IVOR3 */
#define SPRN_GIVOR4 0x1BA /* Guest IVOR4 */
......@@ -170,6 +171,7 @@
#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
#define SPRN_PWRMGTCR0 0x3FB /* Power management control register 0 */
#define SPRN_SVR 0x3FF /* System Version Register */
/*
......@@ -216,6 +218,14 @@
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
/* Bit definitions for PWRMGTCR0. */
#define PWRMGTCR0_PW20_WAIT (1 << 14) /* PW20 state enable bit */
#define PWRMGTCR0_PW20_ENT_SHIFT 8
#define PWRMGTCR0_PW20_ENT 0x3F00
#define PWRMGTCR0_AV_IDLE_PD_EN (1 << 22) /* Altivec idle enable */
#define PWRMGTCR0_AV_IDLE_CNT_SHIFT 16
#define PWRMGTCR0_AV_IDLE_CNT 0x3F0000
/* Bit definitions for the MCSR. */
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
......
......@@ -203,6 +203,15 @@ int main(void)
DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack));
DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack));
DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack));
DEFINE(PACA_TCD_PTR, offsetof(struct paca_struct, tcd_ptr));
DEFINE(TCD_ESEL_NEXT,
offsetof(struct tlb_core_data, esel_next));
DEFINE(TCD_ESEL_MAX,
offsetof(struct tlb_core_data, esel_max));
DEFINE(TCD_ESEL_FIRST,
offsetof(struct tlb_core_data, esel_first));
DEFINE(TCD_LOCK, offsetof(struct tlb_core_data, lock));
#endif /* CONFIG_PPC_BOOK3E */
#ifdef CONFIG_PPC_STD_MMU_64
......
......@@ -53,11 +53,57 @@ _GLOBAL(__e500_dcache_setup)
isync
blr
/*
* FIXME - we haven't yet done testing to determine a reasonable default
* value for PW20_WAIT_IDLE_BIT.
*/
#define PW20_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */
_GLOBAL(setup_pw20_idle)
mfspr r3, SPRN_PWRMGTCR0
/* Set PW20_WAIT bit, enable pw20 state*/
ori r3, r3, PWRMGTCR0_PW20_WAIT
li r11, PW20_WAIT_IDLE_BIT
/* Set Automatic PW20 Core Idle Count */
rlwimi r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT
mtspr SPRN_PWRMGTCR0, r3
blr
/*
* FIXME - we haven't yet done testing to determine a reasonable default
* value for AV_WAIT_IDLE_BIT.
*/
#define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */
_GLOBAL(setup_altivec_idle)
mfspr r3, SPRN_PWRMGTCR0
/* Enable Altivec Idle */
oris r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h
li r11, AV_WAIT_IDLE_BIT
/* Set Automatic AltiVec Idle Count */
rlwimi r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT
mtspr SPRN_PWRMGTCR0, r3
blr
_GLOBAL(__setup_cpu_e6500)
mflr r6
#ifdef CONFIG_PPC64
bl .setup_altivec_ivors
/* Touch IVOR42 only if the CPU supports E.HV category */
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
bl .setup_lrat_ivor
1:
#endif
bl setup_pw20_idle
bl setup_altivec_idle
bl __setup_cpu_e5500
mtlr r6
blr
......@@ -119,6 +165,14 @@ _GLOBAL(__setup_cpu_e5500)
_GLOBAL(__restore_cpu_e6500)
mflr r5
bl .setup_altivec_ivors
/* Touch IVOR42 only if the CPU supports E.HV category */
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
bl .setup_lrat_ivor
1:
bl .setup_pw20_idle
bl .setup_altivec_idle
bl __restore_cpu_e5500
mtlr r5
blr
......
......@@ -308,6 +308,7 @@ interrupt_base_book3e: /* fake trap */
EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
EXCEPTION_STUB(0x300, hypercall)
EXCEPTION_STUB(0x320, ehpriv)
EXCEPTION_STUB(0x340, lrat_error)
.globl interrupt_end_book3e
interrupt_end_book3e:
......@@ -677,6 +678,17 @@ kernel_dbg_exc:
bl .unknown_exception
b .ret_from_except
/* LRAT Error interrupt */
START_EXCEPTION(lrat_error);
NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x340, PACA_EXGEN, INTS_KEEP)
addi r3,r1,STACK_FRAME_OVERHEAD
bl .save_nvgprs
INTS_RESTORE_HARD
bl .unknown_exception
b .ret_from_except
/*
* An interrupt came in while soft-disabled; We mark paca->irq_happened
* accordingly and if the interrupt is level sensitive, we hard disable
......@@ -859,6 +871,7 @@ BAD_STACK_TRAMPOLINE(0x2e0)
BAD_STACK_TRAMPOLINE(0x300)
BAD_STACK_TRAMPOLINE(0x310)
BAD_STACK_TRAMPOLINE(0x320)
BAD_STACK_TRAMPOLINE(0x340)
BAD_STACK_TRAMPOLINE(0x400)
BAD_STACK_TRAMPOLINE(0x500)
BAD_STACK_TRAMPOLINE(0x600)
......@@ -1055,12 +1068,9 @@ skpinv: addi r6,r6,1 /* Increment */
mtspr SPRN_MAS0,r3
tlbre
mfspr r6,SPRN_MAS1
rlwinm r6,r6,0,2,0 /* clear IPROT */
rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */
mtspr SPRN_MAS1,r6
tlbwe
/* Invalidate TLB1 */
PPC_TLBILX_ALL(0,R0)
sync
isync
......@@ -1114,12 +1124,9 @@ skpinv: addi r6,r6,1 /* Increment */
mtspr SPRN_MAS0,r4
tlbre
mfspr r5,SPRN_MAS1
rlwinm r5,r5,0,2,0 /* clear IPROT */
rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */
mtspr SPRN_MAS1,r5
tlbwe
/* Invalidate TLB1 */
PPC_TLBILX_ALL(0,R0)
sync
isync
......@@ -1414,3 +1421,7 @@ _GLOBAL(setup_ehv_ivors)
SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
blr
_GLOBAL(setup_lrat_ivor)
SET_IVOR(42, 0x340) /* LRAT Error */
blr
......@@ -176,6 +176,8 @@ skpinv: addi r6,r6,1 /* Increment */
/* 7. Jump to KERNELBASE mapping */
lis r6,(KERNELBASE & ~0xfff)@h
ori r6,r6,(KERNELBASE & ~0xfff)@l
rlwinm r7,r25,0,0x03ffffff
add r6,r7,r6
#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
/*
......
......@@ -65,29 +65,78 @@ _ENTRY(_start);
nop
/* Translate device tree address to physical, save in r30/r31 */
mfmsr r16
mfspr r17,SPRN_PID
rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */
rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */
mtspr SPRN_MAS6,r17
tlbsx 0,r3 /* must succeed */
mfspr r16,SPRN_MAS1
mfspr r20,SPRN_MAS3
rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */
li r18,1024
slw r18,r18,r17 /* r18 = page size */
addi r18,r18,-1
and r19,r3,r18 /* r19 = page offset */
andc r31,r20,r18 /* r31 = page base */
or r31,r31,r19 /* r31 = devtree phys addr */
mfspr r30,SPRN_MAS7
bl get_phys_addr
mr r30,r3
mr r31,r4
li r25,0 /* phys kernel start (low) */
li r24,0 /* CPU number */
li r23,0 /* phys kernel start (high) */
#ifdef CONFIG_RELOCATABLE
LOAD_REG_ADDR_PIC(r3, _stext) /* Get our current runtime base */
/* Translate _stext address to physical, save in r23/r25 */
bl get_phys_addr
mr r23,r3
mr r25,r4
bl 0f
0: mflr r8
addis r3,r8,(is_second_reloc - 0b)@ha
lwz r19,(is_second_reloc - 0b)@l(r3)
/* Check if this is the second relocation. */
cmpwi r19,1
bne 1f
/*
* For the second relocation, we already get the real memstart_addr
* from device tree. So we will map PAGE_OFFSET to memstart_addr,
* then the virtual address of start kernel should be:
* PAGE_OFFSET + (kernstart_addr - memstart_addr)
* Since the offset between kernstart_addr and memstart_addr should
* never be beyond 1G, so we can just use the lower 32bit of them
* for the calculation.
*/
lis r3,PAGE_OFFSET@h
addis r4,r8,(kernstart_addr - 0b)@ha
addi r4,r4,(kernstart_addr - 0b)@l
lwz r5,4(r4)
addis r6,r8,(memstart_addr - 0b)@ha
addi r6,r6,(memstart_addr - 0b)@l
lwz r7,4(r6)
subf r5,r7,r5
add r3,r3,r5
b 2f
1:
/*
* We have the runtime (virutal) address of our base.
* We calculate our shift of offset from a 64M page.
* We could map the 64M page we belong to at PAGE_OFFSET and
* get going from there.
*/
lis r4,KERNELBASE@h
ori r4,r4,KERNELBASE@l
rlwinm r6,r25,0,0x3ffffff /* r6 = PHYS_START % 64M */
rlwinm r5,r4,0,0x3ffffff /* r5 = KERNELBASE % 64M */
subf r3,r5,r6 /* r3 = r6 - r5 */
add r3,r4,r3 /* Required Virtual Address */
2: bl relocate
/*
* For the second relocation, we already set the right tlb entries
* for the kernel space, so skip the code in fsl_booke_entry_mapping.S
*/
cmpwi r19,1
beq set_ivor
#endif
/* We try to not make any assumptions about how the boot loader
* setup or used the TLBs. We invalidate all mappings from the
* boot loader and load a single entry in TLB1[0] to map the
......@@ -113,6 +162,7 @@ _ENTRY(__early_start)
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_BOOT_SETUP
set_ivor:
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
SET_IVOR(1, MachineCheck);
......@@ -166,8 +216,7 @@ _ENTRY(__early_start)
/* Check to see if we're the second processor, and jump
* to the secondary_start code if so
*/
lis r24, boot_cpuid@h
ori r24, r24, boot_cpuid@l
LOAD_REG_ADDR_PIC(r24, boot_cpuid)
lwz r24, 0(r24)
cmpwi r24, -1
mfspr r24,SPRN_PIR
......@@ -197,6 +246,18 @@ _ENTRY(__early_start)
bl early_init
#ifdef CONFIG_RELOCATABLE
mr r3,r30
mr r4,r31
#ifdef CONFIG_PHYS_64BIT
mr r5,r23
mr r6,r25
#else
mr r5,r25
#endif
bl relocate_init
#endif
#ifdef CONFIG_DYNAMIC_MEMSTART
lis r3,kernstart_addr@ha
la r3,kernstart_addr@l(r3)
......@@ -855,6 +916,33 @@ KernelSPE:
#endif /* CONFIG_SPE */
/*
* Translate the effec addr in r3 to phys addr. The phys addr will be put
* into r3(higher 32bit) and r4(lower 32bit)
*/
get_phys_addr:
mfmsr r8
mfspr r9,SPRN_PID
rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */
rlwimi r9,r8,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */
mtspr SPRN_MAS6,r9
tlbsx 0,r3 /* must succeed */
mfspr r8,SPRN_MAS1
mfspr r12,SPRN_MAS3
rlwinm r9,r8,25,0x1f /* r9 = log2(page size) */
li r10,1024
slw r10,r10,r9 /* r10 = page size */
addi r10,r10,-1
and r11,r3,r10 /* r11 = page offset */
andc r4,r12,r10 /* r4 = page base */
or r4,r4,r11 /* r4 = devtree phys addr */
#ifdef CONFIG_PHYS_64BIT
mfspr r3,SPRN_MAS7
#endif
blr
/*
* Global functions
*/
......@@ -1057,24 +1145,36 @@ _GLOBAL(__flush_disable_L1)
/* When we get here, r24 needs to hold the CPU # */
.globl __secondary_start
__secondary_start:
lis r3,__secondary_hold_acknowledge@h
ori r3,r3,__secondary_hold_acknowledge@l
stw r24,0(r3)
li r3,0
mr r4,r24 /* Why? */
bl call_setup_cpu
lis r3,tlbcam_index@ha
lwz r3,tlbcam_index@l(r3)
LOAD_REG_ADDR_PIC(r3, tlbcam_index)
lwz r3,0(r3)
mtctr r3
li r26,0 /* r26 safe? */
bl switch_to_as1
mr r27,r3 /* tlb entry */
/* Load each CAM entry */
1: mr r3,r26
bl loadcam_entry
addi r26,r26,1
bdnz 1b
mr r3,r27 /* tlb entry */
LOAD_REG_ADDR_PIC(r4, memstart_addr)
lwz r4,0(r4)
mr r5,r25 /* phys kernel start */
rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */
subf r4,r5,r4 /* memstart_addr - phys kernel start */
li r5,0 /* no device tree */
li r6,0 /* not boot cpu */
bl restore_to_as0
lis r3,__secondary_hold_acknowledge@h
ori r3,r3,__secondary_hold_acknowledge@l
stw r24,0(r3)
li r3,0
mr r4,r24 /* Why? */
bl call_setup_cpu
/* get current_thread_info and current */
lis r1,secondary_ti@ha
......@@ -1110,6 +1210,112 @@ __secondary_hold_acknowledge:
.long -1
#endif
/*
* Create a tlb entry with the same effective and physical address as
* the tlb entry used by the current running code. But set the TS to 1.
* Then switch to the address space 1. It will return with the r3 set to
* the ESEL of the new created tlb.
*/
_GLOBAL(switch_to_as1)
mflr r5
/* Find a entry not used */
mfspr r3,SPRN_TLB1CFG
andi. r3,r3,0xfff
mfspr r4,SPRN_PID
rlwinm r4,r4,16,0x3fff0000 /* turn PID into MAS6[SPID] */
mtspr SPRN_MAS6,r4
1: lis r4,0x1000 /* Set MAS0(TLBSEL) = 1 */
addi r3,r3,-1
rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r4
tlbre
mfspr r4,SPRN_MAS1
andis. r4,r4,MAS1_VALID@h
bne 1b
/* Get the tlb entry used by the current running code */
bl 0f
0: mflr r4
tlbsx 0,r4
mfspr r4,SPRN_MAS1
ori r4,r4,MAS1_TS /* Set the TS = 1 */
mtspr SPRN_MAS1,r4
mfspr r4,SPRN_MAS0
rlwinm r4,r4,0,~MAS0_ESEL_MASK
rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r4
tlbwe
isync
sync
mfmsr r4
ori r4,r4,MSR_IS | MSR_DS
mtspr SPRN_SRR0,r5
mtspr SPRN_SRR1,r4
sync
rfi
/*
* Restore to the address space 0 and also invalidate the tlb entry created
* by switch_to_as1.
* r3 - the tlb entry which should be invalidated
* r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0)
* r5 - device tree virtual address. If r4 is 0, r5 is ignored.
* r6 - boot cpu
*/
_GLOBAL(restore_to_as0)
mflr r0
bl 0f
0: mflr r9
addi r9,r9,1f - 0b
/*
* We may map the PAGE_OFFSET in AS0 to a different physical address,
* so we need calculate the right jump and device tree address based
* on the offset passed by r4.
*/
add r9,r9,r4
add r5,r5,r4
add r0,r0,r4
2: mfmsr r7
li r8,(MSR_IS | MSR_DS)
andc r7,r7,r8
mtspr SPRN_SRR0,r9
mtspr SPRN_SRR1,r7
sync
rfi
/* Invalidate the temporary tlb entry for AS1 */
1: lis r9,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r9,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r9
tlbre
mfspr r9,SPRN_MAS1
rlwinm r9,r9,0,2,31 /* Clear MAS1 Valid and IPPROT */
mtspr SPRN_MAS1,r9
tlbwe
isync
cmpwi r4,0
cmpwi cr1,r6,0
cror eq,4*cr1+eq,eq
bne 3f /* offset != 0 && is_boot_cpu */
mtlr r0
blr
/*
* The PAGE_OFFSET will map to a different physical address,
* jump to _start to do another relocation again.
*/
3: mr r3,r5
bl _start
/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
......
......@@ -160,6 +160,11 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
#ifdef CONFIG_PPC_STD_MMU_64
new_paca->slb_shadow_ptr = init_slb_shadow(cpu);
#endif /* CONFIG_PPC_STD_MMU_64 */
#ifdef CONFIG_PPC_BOOK3E
/* For now -- if we have threads this will be adjusted later */
new_paca->tcd_ptr = &new_paca->tcd;
#endif
}
/* Put the paca pointer into r13 and SPRG_PACA */
......
......@@ -1296,6 +1296,19 @@ int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
if (val & PR_FP_EXC_SW_ENABLE) {
#ifdef CONFIG_SPE
if (cpu_has_feature(CPU_FTR_SPE)) {
/*
* When the sticky exception bits are set
* directly by userspace, it must call prctl
* with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
* in the existing prctl settings) or
* PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
* the bits being set). <fenv.h> functions
* saving and restoring the whole
* floating-point environment need to do so
* anyway to restore the prctl settings from
* the saved environment.
*/
tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
tsk->thread.fpexc_mode = val &
(PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT);
return 0;
......@@ -1327,9 +1340,22 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
#ifdef CONFIG_SPE
if (cpu_has_feature(CPU_FTR_SPE))
if (cpu_has_feature(CPU_FTR_SPE)) {
/*
* When the sticky exception bits are set
* directly by userspace, it must call prctl
* with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
* in the existing prctl settings) or
* PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
* the bits being set). <fenv.h> functions
* saving and restoring the whole
* floating-point environment need to do so
* anyway to restore the prctl settings from
* the saved environment.
*/
tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
val = tsk->thread.fpexc_mode;
else
} else
return -EINVAL;
#else
return -EINVAL;
......
......@@ -523,6 +523,20 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node,
return early_init_dt_scan_memory(node, uname, depth, data);
}
/*
* For a relocatable kernel, we need to get the memstart_addr first,
* then use it to calculate the virtual kernel start address. This has
* to happen at a very early stage (before machine_init). In this case,
* we just want to get the memstart_address and would not like to mess the
* memblock at this stage. So introduce a variable to skip the memblock_add()
* for this reason.
*/
#ifdef CONFIG_RELOCATABLE
static int add_mem_to_memblock = 1;
#else
#define add_mem_to_memblock 1
#endif
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
#ifdef CONFIG_PPC64
......@@ -543,6 +557,7 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
}
/* Add the chunk to the MEMBLOCK list */
if (add_mem_to_memblock)
memblock_add(base, size);
}
......@@ -740,6 +755,30 @@ void __init early_init_devtree(void *params)
DBG(" <- early_init_devtree()\n");
}
#ifdef CONFIG_RELOCATABLE
/*
* This function run before early_init_devtree, so we have to init
* initial_boot_params.
*/
void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
{
/* Setup flat device-tree pointer */
initial_boot_params = params;
/*
* Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
* mess the memblock.
*/
add_mem_to_memblock = 0;
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
add_mem_to_memblock = 1;
if (size)
*size = first_memblock_size;
}
#endif
/*******
*
* New implementation of the OF "find" APIs, return a refcounted
......
......@@ -97,6 +97,36 @@ int dcache_bsize;
int icache_bsize;
int ucache_bsize;
#if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP)
static void setup_tlb_core_data(void)
{
int cpu;
for_each_possible_cpu(cpu) {
int first = cpu_first_thread_sibling(cpu);
paca[cpu].tcd_ptr = &paca[first].tcd;
/*
* If we have threads, we need either tlbsrx.
* or e6500 tablewalk mode, or else TLB handlers
* will be racy and could produce duplicate entries.
*/
if (smt_enabled_at_boot >= 2 &&
!mmu_has_feature(MMU_FTR_USE_TLBRSRV) &&
book3e_htw_mode != PPC_HTW_E6500) {
/* Should we panic instead? */
WARN_ONCE("%s: unsupported MMU configuration -- expect problems\n",
__func__);
}
}
}
#else
static void setup_tlb_core_data(void)
{
}
#endif
#ifdef CONFIG_SMP
static char *smt_enabled_cmdline;
......@@ -445,6 +475,7 @@ void __init setup_system(void)
smp_setup_cpu_maps();
check_smt_enabled();
setup_tlb_core_data();
#ifdef CONFIG_SMP
/* Release secondary cpus out of their spinloops at 0x60 now that
......
......@@ -74,21 +74,21 @@ _GLOBAL(swsusp_arch_suspend)
bne 1b
/* Save SPRGs */
mfsprg r4,0
mfspr r4,SPRN_SPRG0
stw r4,SL_SPRG0(r11)
mfsprg r4,1
mfspr r4,SPRN_SPRG1
stw r4,SL_SPRG1(r11)
mfsprg r4,2
mfspr r4,SPRN_SPRG2
stw r4,SL_SPRG2(r11)
mfsprg r4,3
mfspr r4,SPRN_SPRG3
stw r4,SL_SPRG3(r11)
mfsprg r4,4
mfspr r4,SPRN_SPRG4
stw r4,SL_SPRG4(r11)
mfsprg r4,5
mfspr r4,SPRN_SPRG5
stw r4,SL_SPRG5(r11)
mfsprg r4,6
mfspr r4,SPRN_SPRG6
stw r4,SL_SPRG6(r11)
mfsprg r4,7
mfspr r4,SPRN_SPRG7
stw r4,SL_SPRG7(r11)
/* Call the low level suspend stuff (we should probably have made
......@@ -150,21 +150,21 @@ _GLOBAL(swsusp_arch_resume)
bl _tlbil_all
lwz r4,SL_SPRG0(r11)
mtsprg 0,r4
mtspr SPRN_SPRG0,r4
lwz r4,SL_SPRG1(r11)
mtsprg 1,r4
mtspr SPRN_SPRG1,r4
lwz r4,SL_SPRG2(r11)
mtsprg 2,r4
mtspr SPRN_SPRG2,r4
lwz r4,SL_SPRG3(r11)
mtsprg 3,r4
mtspr SPRN_SPRG3,r4
lwz r4,SL_SPRG4(r11)
mtsprg 4,r4
mtspr SPRN_SPRG4,r4
lwz r4,SL_SPRG5(r11)
mtsprg 5,r4
mtspr SPRN_SPRG5,r4
lwz r4,SL_SPRG6(r11)
mtsprg 6,r4
mtspr SPRN_SPRG6,r4
lwz r4,SL_SPRG7(r11)
mtsprg 7,r4
mtspr SPRN_SPRG7,r4
/* restore the MSR */
lwz r3,SL_MSR(r11)
......
......@@ -86,6 +86,304 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay);
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC_FSL_BOOK3E
#define MAX_BIT 63
static u64 pw20_wt;
static u64 altivec_idle_wt;
static unsigned int get_idle_ticks_bit(u64 ns)
{
u64 cycle;
if (ns >= 10000)
cycle = div_u64(ns + 500, 1000) * tb_ticks_per_usec;
else
cycle = div_u64(ns * tb_ticks_per_usec, 1000);
if (!cycle)
return 0;
return ilog2(cycle);
}
static void do_show_pwrmgtcr0(void *val)
{
u32 *value = val;
*value = mfspr(SPRN_PWRMGTCR0);
}
static ssize_t show_pw20_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
u32 value;
unsigned int cpu = dev->id;
smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
value &= PWRMGTCR0_PW20_WAIT;
return sprintf(buf, "%u\n", value ? 1 : 0);
}
static void do_store_pw20_state(void *val)
{
u32 *value = val;
u32 pw20_state;
pw20_state = mfspr(SPRN_PWRMGTCR0);
if (*value)
pw20_state |= PWRMGTCR0_PW20_WAIT;
else
pw20_state &= ~PWRMGTCR0_PW20_WAIT;
mtspr(SPRN_PWRMGTCR0, pw20_state);
}
static ssize_t store_pw20_state(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
u32 value;
unsigned int cpu = dev->id;
if (kstrtou32(buf, 0, &value))
return -EINVAL;
if (value > 1)
return -EINVAL;
smp_call_function_single(cpu, do_store_pw20_state, &value, 1);
return count;
}
static ssize_t show_pw20_wait_time(struct device *dev,
struct device_attribute *attr, char *buf)
{
u32 value;
u64 tb_cycle = 1;
u64 time;
unsigned int cpu = dev->id;
if (!pw20_wt) {
smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
value = (value & PWRMGTCR0_PW20_ENT) >>
PWRMGTCR0_PW20_ENT_SHIFT;
tb_cycle = (tb_cycle << (MAX_BIT - value + 1));
/* convert ms to ns */
if (tb_ticks_per_usec > 1000) {
time = div_u64(tb_cycle, tb_ticks_per_usec / 1000);
} else {
u32 rem_us;
time = div_u64_rem(tb_cycle, tb_ticks_per_usec,
&rem_us);
time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec;
}
} else {
time = pw20_wt;
}
return sprintf(buf, "%llu\n", time > 0 ? time : 0);
}
static void set_pw20_wait_entry_bit(void *val)
{
u32 *value = val;
u32 pw20_idle;
pw20_idle = mfspr(SPRN_PWRMGTCR0);
/* Set Automatic PW20 Core Idle Count */
/* clear count */
pw20_idle &= ~PWRMGTCR0_PW20_ENT;
/* set count */
pw20_idle |= ((MAX_BIT - *value) << PWRMGTCR0_PW20_ENT_SHIFT);
mtspr(SPRN_PWRMGTCR0, pw20_idle);
}
static ssize_t store_pw20_wait_time(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
u32 entry_bit;
u64 value;
unsigned int cpu = dev->id;
if (kstrtou64(buf, 0, &value))
return -EINVAL;
if (!value)
return -EINVAL;
entry_bit = get_idle_ticks_bit(value);
if (entry_bit > MAX_BIT)
return -EINVAL;
pw20_wt = value;
smp_call_function_single(cpu, set_pw20_wait_entry_bit,
&entry_bit, 1);
return count;
}
static ssize_t show_altivec_idle(struct device *dev,
struct device_attribute *attr, char *buf)
{
u32 value;
unsigned int cpu = dev->id;
smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
value &= PWRMGTCR0_AV_IDLE_PD_EN;
return sprintf(buf, "%u\n", value ? 1 : 0);
}
static void do_store_altivec_idle(void *val)
{
u32 *value = val;
u32 altivec_idle;
altivec_idle = mfspr(SPRN_PWRMGTCR0);
if (*value)
altivec_idle |= PWRMGTCR0_AV_IDLE_PD_EN;
else
altivec_idle &= ~PWRMGTCR0_AV_IDLE_PD_EN;
mtspr(SPRN_PWRMGTCR0, altivec_idle);
}
static ssize_t store_altivec_idle(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
u32 value;
unsigned int cpu = dev->id;
if (kstrtou32(buf, 0, &value))
return -EINVAL;
if (value > 1)
return -EINVAL;
smp_call_function_single(cpu, do_store_altivec_idle, &value, 1);
return count;
}
static ssize_t show_altivec_idle_wait_time(struct device *dev,
struct device_attribute *attr, char *buf)
{
u32 value;
u64 tb_cycle = 1;
u64 time;
unsigned int cpu = dev->id;
if (!altivec_idle_wt) {
smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
value = (value & PWRMGTCR0_AV_IDLE_CNT) >>
PWRMGTCR0_AV_IDLE_CNT_SHIFT;
tb_cycle = (tb_cycle << (MAX_BIT - value + 1));
/* convert ms to ns */
if (tb_ticks_per_usec > 1000) {
time = div_u64(tb_cycle, tb_ticks_per_usec / 1000);
} else {
u32 rem_us;
time = div_u64_rem(tb_cycle, tb_ticks_per_usec,
&rem_us);
time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec;
}
} else {
time = altivec_idle_wt;
}
return sprintf(buf, "%llu\n", time > 0 ? time : 0);
}
static void set_altivec_idle_wait_entry_bit(void *val)
{
u32 *value = val;
u32 altivec_idle;
altivec_idle = mfspr(SPRN_PWRMGTCR0);
/* Set Automatic AltiVec Idle Count */
/* clear count */
altivec_idle &= ~PWRMGTCR0_AV_IDLE_CNT;
/* set count */
altivec_idle |= ((MAX_BIT - *value) << PWRMGTCR0_AV_IDLE_CNT_SHIFT);
mtspr(SPRN_PWRMGTCR0, altivec_idle);
}
static ssize_t store_altivec_idle_wait_time(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
u32 entry_bit;
u64 value;
unsigned int cpu = dev->id;
if (kstrtou64(buf, 0, &value))
return -EINVAL;
if (!value)
return -EINVAL;
entry_bit = get_idle_ticks_bit(value);
if (entry_bit > MAX_BIT)
return -EINVAL;
altivec_idle_wt = value;
smp_call_function_single(cpu, set_altivec_idle_wait_entry_bit,
&entry_bit, 1);
return count;
}
/*
* Enable/Disable interface:
* 0, disable. 1, enable.
*/
static DEVICE_ATTR(pw20_state, 0600, show_pw20_state, store_pw20_state);
static DEVICE_ATTR(altivec_idle, 0600, show_altivec_idle, store_altivec_idle);
/*
* Set wait time interface:(Nanosecond)
* Example: Base on TBfreq is 41MHZ.
* 1~48(ns): TB[63]
* 49~97(ns): TB[62]
* 98~195(ns): TB[61]
* 196~390(ns): TB[60]
* 391~780(ns): TB[59]
* 781~1560(ns): TB[58]
* ...
*/
static DEVICE_ATTR(pw20_wait_time, 0600,
show_pw20_wait_time,
store_pw20_wait_time);
static DEVICE_ATTR(altivec_idle_wait_time, 0600,
show_altivec_idle_wait_time,
store_altivec_idle_wait_time);
#endif
/*
* Enabling PMCs will slow partition context switch times so we only do
* it the first time we write to the PMCs.
......@@ -425,6 +723,15 @@ static void register_cpu_online(unsigned int cpu)
device_create_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC_FSL_BOOK3E
if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
device_create_file(s, &dev_attr_pw20_state);
device_create_file(s, &dev_attr_pw20_wait_time);
device_create_file(s, &dev_attr_altivec_idle);
device_create_file(s, &dev_attr_altivec_idle_wait_time);
}
#endif
cacheinfo_cpu_online(cpu);
}
......@@ -497,6 +804,15 @@ static void unregister_cpu_online(unsigned int cpu)
device_remove_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC_FSL_BOOK3E
if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
device_remove_file(s, &dev_attr_pw20_state);
device_remove_file(s, &dev_attr_pw20_wait_time);
device_remove_file(s, &dev_attr_altivec_idle);
device_remove_file(s, &dev_attr_altivec_idle_wait_time);
}
#endif
cacheinfo_cpu_offline(cpu);
}
......
......@@ -319,6 +319,8 @@ kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(DBG), \
SPRN_DSRR0, SPRN_DSRR1, 0
kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(CRIT), \
SPRN_CSRR0, SPRN_CSRR1, 0
kvm_handler BOOKE_INTERRUPT_LRAT_ERROR, EX_PARAMS(GEN), \
SPRN_SRR0, SPRN_SRR1, (NEED_EMU | NEED_DEAR | NEED_ESR)
#else
/*
* For input register values, see arch/powerpc/include/asm/kvm_booke_hv_asm.h
......
This diff is collapsed.
......@@ -52,6 +52,7 @@
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/paca.h>
#include "mmu_decl.h"
......@@ -171,11 +172,10 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
return 1UL << camsize;
}
unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
unsigned long ram, int max_cam_idx)
{
int i;
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
unsigned long amount_mapped = 0;
/* Calculate CAM values */
......@@ -192,9 +192,23 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
}
tlbcam_index = i;
#ifdef CONFIG_PPC64
get_paca()->tcd.esel_next = i;
get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
get_paca()->tcd.esel_first = i;
#endif
return amount_mapped;
}
unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
{
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx);
}
#ifdef CONFIG_PPC32
#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
......@@ -222,7 +236,9 @@ void __init adjust_total_lowmem(void)
/* adjust lowmem size to __max_low_memory */
ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
i = switch_to_as1();
__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
restore_to_as0(i, 0, 0, 1);
pr_info("Memory CAM mapping: ");
for (i = 0; i < tlbcam_index - 1; i++)
......@@ -241,4 +257,62 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
/* 64M mapped initially according to head_fsl_booke.S */
memblock_set_current_limit(min_t(u64, limit, 0x04000000));
}
#ifdef CONFIG_RELOCATABLE
int __initdata is_second_reloc;
notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
{
unsigned long base = KERNELBASE;
kernstart_addr = start;
if (is_second_reloc) {
virt_phys_offset = PAGE_OFFSET - memstart_addr;
return;
}
/*
* Relocatable kernel support based on processing of dynamic
* relocation entries. Before we get the real memstart_addr,
* We will compute the virt_phys_offset like this:
* virt_phys_offset = stext.run - kernstart_addr
*
* stext.run = (KERNELBASE & ~0x3ffffff) +
* (kernstart_addr & 0x3ffffff)
* When we relocate, we have :
*
* (kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff)
*
* hence:
* virt_phys_offset = (KERNELBASE & ~0x3ffffff) -
* (kernstart_addr & ~0x3ffffff)
*
*/
start &= ~0x3ffffff;
base &= ~0x3ffffff;
virt_phys_offset = base - start;
early_get_first_memblock_info(__va(dt_ptr), NULL);
/*
* We now get the memstart_addr, then we should check if this
* address is the same as what the PAGE_OFFSET map to now. If
* not we have to change the map of PAGE_OFFSET to memstart_addr
* and do a second relocation.
*/
if (start != memstart_addr) {
int n;
long offset = start - memstart_addr;
is_second_reloc = 1;
n = switch_to_as1();
/* map a 64M area for the second relocation */
if (memstart_addr > start)
map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM);
else
map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
0x4000000, CONFIG_LOWMEM_CAM_NUM);
restore_to_as0(n, offset, __va(dt_ptr), 1);
/* We should never reach here */
panic("Relocation error");
}
}
#endif
#endif
......@@ -8,6 +8,44 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
#ifdef CONFIG_PPC_FSL_BOOK3E
#ifdef CONFIG_PPC64
static inline int tlb1_next(void)
{
struct paca_struct *paca = get_paca();
struct tlb_core_data *tcd;
int this, next;
tcd = paca->tcd_ptr;
this = tcd->esel_next;
next = this + 1;
if (next >= tcd->esel_max)
next = tcd->esel_first;
tcd->esel_next = next;
return this;
}
#else
static inline int tlb1_next(void)
{
int index, ncams;
ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
index = __get_cpu_var(next_tlbcam_idx);
/* Just round-robin the entries and wrap when we hit the end */
if (unlikely(index == ncams - 1))
__get_cpu_var(next_tlbcam_idx) = tlbcam_index;
else
__get_cpu_var(next_tlbcam_idx)++;
return index;
}
#endif /* !PPC64 */
#endif /* FSL */
static inline int mmu_get_tsize(int psize)
{
return mmu_psize_defs[psize].enc;
......@@ -47,7 +85,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
struct mm_struct *mm;
#ifdef CONFIG_PPC_FSL_BOOK3E
int index, ncams;
int index;
#endif
if (unlikely(is_kernel_addr(ea)))
......@@ -77,18 +115,11 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
}
#ifdef CONFIG_PPC_FSL_BOOK3E
ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
/* We have to use the CAM(TLB1) on FSL parts for hugepages */
index = __get_cpu_var(next_tlbcam_idx);
index = tlb1_next();
mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1));
/* Just round-robin the entries and wrap when we hit the end */
if (unlikely(index == ncams - 1))
__get_cpu_var(next_tlbcam_idx) = tlbcam_index;
else
__get_cpu_var(next_tlbcam_idx)++;
#endif
mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize);
mas2 = ea & ~((1UL << shift) - 1);
mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK;
......@@ -103,6 +134,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) {
mtspr(SPRN_MAS7_MAS3, mas7_3);
} else {
if (mmu_has_feature(MMU_FTR_BIG_PHYS))
mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
mtspr(SPRN_MAS3, lower_32_bits(mas7_3));
}
......
......@@ -307,6 +307,12 @@ static void __init register_page_bootmem_info(void)
void __init mem_init(void)
{
/*
* book3s is limited to 16 page sizes due to encoding this in
* a 4-bit field for slices.
*/
BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
#ifdef CONFIG_SWIOTLB
swiotlb_init(0);
#endif
......
......@@ -148,6 +148,8 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
extern void adjust_total_lowmem(void);
extern int switch_to_as1(void);
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
#endif
extern void loadcam_entry(unsigned int index);
......
......@@ -299,6 +299,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
}
smp_wmb();
return err;
}
......
......@@ -152,6 +152,18 @@ int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
}
#endif /* !CONFIG_PPC_MMU_NOHASH */
}
#ifdef CONFIG_PPC_BOOK3E_64
/*
* With hardware tablewalk, a sync is needed to ensure that
* subsequent accesses see the PTE we just wrote. Unlike userspace
* mappings, we can't tolerate spurious faults, so make sure
* the new PTE will be seen the first time.
*/
mb();
#else
smp_wmb();
#endif
return 0;
}
......
......@@ -136,7 +136,7 @@ BEGIN_MMU_FTR_SECTION
*/
PPC_TLBSRX_DOT(0,R16)
ldx r14,r14,r15 /* grab pgd entry */
beq normal_tlb_miss_done /* tlb exists already, bail */
beq tlb_miss_done_bolted /* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
ldx r14,r14,r15 /* grab pgd entry */
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
......@@ -192,6 +192,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
mtspr SPRN_MAS7_MAS3,r15
tlbwe
tlb_miss_done_bolted:
TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
tlb_epilog_bolted
rfi
......@@ -239,6 +240,177 @@ itlb_miss_fault_bolted:
beq tlb_miss_common_bolted
b itlb_miss_kernel_bolted
/*
* TLB miss handling for e6500 and derivatives, using hardware tablewalk.
*
* Linear mapping is bolted: no virtual page table or nested TLB misses
* Indirect entries in TLB1, hardware loads resulting direct entries
* into TLB0
* No HES or NV hint on TLB1, so we need to do software round-robin
* No tlbsrx. so we need a spinlock, and we have to deal
* with MAS-damage caused by tlbsx
* 4K pages only
*/
START_EXCEPTION(instruction_tlb_miss_e6500)
tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0
ld r11,PACA_TCD_PTR(r13)
srdi. r15,r16,60 /* get region */
ori r16,r16,1
TLB_MISS_STATS_SAVE_INFO_BOLTED
bne tlb_miss_kernel_e6500 /* user/kernel test */
b tlb_miss_common_e6500
START_EXCEPTION(data_tlb_miss_e6500)
tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR
ld r11,PACA_TCD_PTR(r13)
srdi. r15,r16,60 /* get region */
rldicr r16,r16,0,62
TLB_MISS_STATS_SAVE_INFO_BOLTED
bne tlb_miss_kernel_e6500 /* user vs kernel check */
/*
* This is the guts of the TLB miss handler for e6500 and derivatives.
* We are entered with:
*
* r16 = page of faulting address (low bit 0 if data, 1 if instruction)
* r15 = crap (free to use)
* r14 = page table base
* r13 = PACA
* r11 = tlb_per_core ptr
* r10 = crap (free to use)
*/
tlb_miss_common_e6500:
/*
* Search if we already have an indirect entry for that virtual
* address, and if we do, bail out.
*
* MAS6:IND should be already set based on MAS4
*/
addi r10,r11,TCD_LOCK
1: lbarx r15,0,r10
cmpdi r15,0
bne 2f
li r15,1
stbcx. r15,0,r10
bne 1b
.subsection 1
2: lbz r15,0(r10)
cmpdi r15,0
bne 2b
b 1b
.previous
mfspr r15,SPRN_MAS2
tlbsx 0,r16
mfspr r10,SPRN_MAS1
andis. r10,r10,MAS1_VALID@h
bne tlb_miss_done_e6500
/* Undo MAS-damage from the tlbsx */
mfspr r10,SPRN_MAS1
oris r10,r10,MAS1_VALID@h
mtspr SPRN_MAS1,r10
mtspr SPRN_MAS2,r15
/* Now, we need to walk the page tables. First check if we are in
* range.
*/
rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
bne- tlb_miss_fault_e6500
rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
cmpldi cr0,r14,0
clrrdi r15,r15,3
beq- tlb_miss_fault_e6500 /* No PGDIR, bail */
ldx r14,r14,r15 /* grab pgd entry */
rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
clrrdi r15,r15,3
cmpdi cr0,r14,0
bge tlb_miss_fault_e6500 /* Bad pgd entry or hugepage; bail */
ldx r14,r14,r15 /* grab pud entry */
rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
clrrdi r15,r15,3
cmpdi cr0,r14,0
bge tlb_miss_fault_e6500
ldx r14,r14,r15 /* Grab pmd entry */
mfspr r10,SPRN_MAS0
cmpdi cr0,r14,0
bge tlb_miss_fault_e6500
/* Now we build the MAS for a 2M indirect page:
*
* MAS 0 : ESEL needs to be filled by software round-robin
* MAS 1 : Fully set up
* - PID already updated by caller if necessary
* - TSIZE for now is base ind page size always
* - TID already cleared if necessary
* MAS 2 : Default not 2M-aligned, need to be redone
* MAS 3+7 : Needs to be done
*/
ori r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
mtspr SPRN_MAS7_MAS3,r14
clrrdi r15,r16,21 /* make EA 2M-aligned */
mtspr SPRN_MAS2,r15
lbz r15,TCD_ESEL_NEXT(r11)
lbz r16,TCD_ESEL_MAX(r11)
lbz r14,TCD_ESEL_FIRST(r11)
rlwimi r10,r15,16,0x00ff0000 /* insert esel_next into MAS0 */
addi r15,r15,1 /* increment esel_next */
mtspr SPRN_MAS0,r10
cmpw r15,r16
iseleq r15,r14,r15 /* if next == last use first */
stb r15,TCD_ESEL_NEXT(r11)
tlbwe
tlb_miss_done_e6500:
.macro tlb_unlock_e6500
li r15,0
isync
stb r15,TCD_LOCK(r11)
.endm
tlb_unlock_e6500
TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
tlb_epilog_bolted
rfi
tlb_miss_kernel_e6500:
mfspr r10,SPRN_MAS1
ld r14,PACA_KERNELPGD(r13)
cmpldi cr0,r15,8 /* Check for vmalloc region */
rlwinm r10,r10,0,16,1 /* Clear TID */
mtspr SPRN_MAS1,r10
beq+ tlb_miss_common_e6500
tlb_miss_fault_e6500:
tlb_unlock_e6500
/* We need to check if it was an instruction miss */
andi. r16,r16,1
bne itlb_miss_fault_e6500
dtlb_miss_fault_e6500:
TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
tlb_epilog_bolted
b exc_data_storage_book3e
itlb_miss_fault_e6500:
TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
tlb_epilog_bolted
b exc_instruction_storage_book3e
/**********************************************************************
* *
* TLB miss handling for Book3E with TLB reservation and HES support *
......
......@@ -43,6 +43,7 @@
#include <asm/tlb.h>
#include <asm/code-patching.h>
#include <asm/hugetlb.h>
#include <asm/paca.h>
#include "mmu_decl.h"
......@@ -58,6 +59,10 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
.shift = 12,
.enc = BOOK3E_PAGESZ_4K,
},
[MMU_PAGE_2M] = {
.shift = 21,
.enc = BOOK3E_PAGESZ_2M,
},
[MMU_PAGE_4M] = {
.shift = 22,
.enc = BOOK3E_PAGESZ_4M,
......@@ -136,7 +141,7 @@ static inline int mmu_get_tsize(int psize)
int mmu_linear_psize; /* Page size used for the linear mapping */
int mmu_pte_psize; /* Page size used for PTE pages */
int mmu_vmemmap_psize; /* Page size used for the virtual mem map */
int book3e_htw_enabled; /* Is HW tablewalk enabled ? */
int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */
unsigned long linear_map_top; /* Top of linear mapping */
#endif /* CONFIG_PPC64 */
......@@ -377,7 +382,7 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
{
int tsize = mmu_psize_defs[mmu_pte_psize].enc;
if (book3e_htw_enabled) {
if (book3e_htw_mode != PPC_HTW_NONE) {
unsigned long start = address & PMD_MASK;
unsigned long end = address + PMD_SIZE;
unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
......@@ -430,7 +435,7 @@ static void setup_page_sizes(void)
def = &mmu_psize_defs[psize];
shift = def->shift;
if (shift == 0)
if (shift == 0 || shift & 1)
continue;
/* adjust to be in terms of 4^shift Kb */
......@@ -440,21 +445,40 @@ static void setup_page_sizes(void)
def->flags |= MMU_PAGE_SIZE_DIRECT;
}
goto no_indirect;
goto out;
}
if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
u32 tlb1ps = mfspr(SPRN_TLB1PS);
u32 tlb1cfg, tlb1ps;
tlb0cfg = mfspr(SPRN_TLB0CFG);
tlb1cfg = mfspr(SPRN_TLB1CFG);
tlb1ps = mfspr(SPRN_TLB1PS);
eptcfg = mfspr(SPRN_EPTCFG);
if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT))
book3e_htw_mode = PPC_HTW_E6500;
/*
* We expect 4K subpage size and unrestricted indirect size.
* The lack of a restriction on indirect size is a Freescale
* extension, indicated by PSn = 0 but SPSn != 0.
*/
if (eptcfg != 2)
book3e_htw_mode = PPC_HTW_NONE;
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
struct mmu_psize_def *def = &mmu_psize_defs[psize];
if (tlb1ps & (1U << (def->shift - 10))) {
def->flags |= MMU_PAGE_SIZE_DIRECT;
if (book3e_htw_mode && psize == MMU_PAGE_2M)
def->flags |= MMU_PAGE_SIZE_INDIRECT;
}
}
goto no_indirect;
goto out;
}
#endif
......@@ -471,8 +495,11 @@ static void setup_page_sizes(void)
}
/* Indirect page sizes supported ? */
if ((tlb0cfg & TLBnCFG_IND) == 0)
goto no_indirect;
if ((tlb0cfg & TLBnCFG_IND) == 0 ||
(tlb0cfg & TLBnCFG_PT) == 0)
goto out;
book3e_htw_mode = PPC_HTW_IBM;
/* Now, we only deal with one IND page size for each
* direct size. Hopefully all implementations today are
......@@ -497,8 +524,8 @@ static void setup_page_sizes(void)
def->ind = ps + 10;
}
}
no_indirect:
out:
/* Cleanup array and print summary */
pr_info("MMU: Supported page sizes\n");
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
......@@ -520,23 +547,23 @@ static void setup_page_sizes(void)
static void setup_mmu_htw(void)
{
/* Check if HW tablewalk is present, and if yes, enable it by:
*
* - patching the TLB miss handlers to branch to the
* one dedicates to it
*
* - setting the global book3e_htw_enabled
/*
* If we want to use HW tablewalk, enable it by patching the TLB miss
* handlers to branch to the one dedicated to it.
*/
unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
if ((tlb0cfg & TLBnCFG_IND) &&
(tlb0cfg & TLBnCFG_PT)) {
switch (book3e_htw_mode) {
case PPC_HTW_IBM:
patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
book3e_htw_enabled = 1;
break;
case PPC_HTW_E6500:
patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e);
patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e);
break;
}
pr_info("MMU: Book3E HW tablewalk %s\n",
book3e_htw_enabled ? "enabled" : "not supported");
book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported");
}
/*
......@@ -576,8 +603,16 @@ static void __early_init_mmu(int boot_cpu)
/* Set MAS4 based on page table setting */
mas4 = 0x4 << MAS4_WIMGED_SHIFT;
if (book3e_htw_enabled) {
mas4 |= mas4 | MAS4_INDD;
switch (book3e_htw_mode) {
case PPC_HTW_E6500:
mas4 |= MAS4_INDD;
mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT;
mas4 |= MAS4_TLBSELD(1);
mmu_pte_psize = MMU_PAGE_2M;
break;
case PPC_HTW_IBM:
mas4 |= MAS4_INDD;
#ifdef CONFIG_PPC_64K_PAGES
mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
mmu_pte_psize = MMU_PAGE_256M;
......@@ -585,13 +620,16 @@ static void __early_init_mmu(int boot_cpu)
mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
mmu_pte_psize = MMU_PAGE_1M;
#endif
} else {
break;
case PPC_HTW_NONE:
#ifdef CONFIG_PPC_64K_PAGES
mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
#else
mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
#endif
mmu_pte_psize = mmu_virtual_psize;
break;
}
mtspr(SPRN_MAS4, mas4);
......@@ -611,8 +649,11 @@ static void __early_init_mmu(int boot_cpu)
/* limit memory so we dont have linear faults */
memblock_enforce_memory_limit(linear_map_top);
if (book3e_htw_mode == PPC_HTW_NONE) {
patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e);
patch_exception(0x1e0,
exc_instruction_tlb_miss_bolted_book3e);
}
}
#endif
......
......@@ -402,7 +402,9 @@ _GLOBAL(set_context)
* Load TLBCAM[index] entry in to the L2 CAM MMU
*/
_GLOBAL(loadcam_entry)
LOAD_REG_ADDR(r4, TLBCAM)
mflr r5
LOAD_REG_ADDR_PIC(r4, TLBCAM)
mtlr r5
mulli r5,r3,TLBCAM_SIZE
add r3,r5,r4
lwz r4,TLBCAM_MAS0(r3)
......
......@@ -123,6 +123,12 @@ config P1023_RDS
help
This option enables support for the P1023 RDS and RDB boards
config TWR_P102x
bool "Freescale TWR-P102x"
select DEFAULT_UIMAGE
help
This option enables support for the TWR-P1025 board.
config SOCRATES
bool "Socrates"
select DEFAULT_UIMAGE
......
......@@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
......
......@@ -9,6 +9,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/qe.h>
#include <sysdev/cpm2_pic.h>
#include "mpc85xx.h"
......@@ -82,3 +83,40 @@ void __init mpc85xx_cpm2_pic_init(void)
irq_set_chained_handler(irq, cpm2_cascade);
}
#endif
#ifdef CONFIG_QUICC_ENGINE
void __init mpc85xx_qe_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
if (!np) {
pr_err("%s: Could not find Quicc Engine node\n",
__func__);
return;
}
}
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
qe_reset();
of_node_put(np);
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
}
}
#endif
......@@ -8,4 +8,10 @@ extern void mpc85xx_cpm2_pic_init(void);
static inline void __init mpc85xx_cpm2_pic_init(void) {}
#endif /* CONFIG_CPM2 */
#ifdef CONFIG_QUICC_ENGINE
extern void mpc85xx_qe_init(void);
#else
static inline void __init mpc85xx_qe_init(void) {}
#endif
#endif
/*
* Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc.
* Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
* All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
......@@ -238,32 +238,7 @@ static void __init mpc85xx_mds_qe_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
if (!np)
return;
}
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
qe_reset();
of_node_put(np);
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
}
mpc85xx_qe_init();
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
......
/*
* MPC85xx RDB Board Setup
*
* Copyright 2009,2012 Freescale Semiconductor Inc.
* Copyright 2009,2012-2013 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -98,26 +98,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
fsl_pci_assign_primary();
#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
pr_err("%s: Could not find Quicc Engine node\n", __func__);
goto qe_fail;
}
qe_reset();
of_node_put(np);
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
}
mpc85xx_qe_init();
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
if (machine_is(p1025_rdb)) {
......@@ -148,8 +129,6 @@ static void __init mpc85xx_rdb_setup_arch(void)
}
#endif
qe_fail:
#endif /* CONFIG_QUICC_ENGINE */
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
......
......@@ -389,15 +389,18 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
}
#endif /* CONFIG_KEXEC */
static void smp_85xx_setup_cpu(int cpu_nr)
static void smp_85xx_basic_setup(int cpu_nr)
{
if (smp_85xx_ops.probe == smp_mpic_probe)
mpic_setup_this_cpu();
if (cpu_has_feature(CPU_FTR_DBELL))
doorbell_setup_this_cpu();
}
static void smp_85xx_setup_cpu(int cpu_nr)
{
mpic_setup_this_cpu();
smp_85xx_basic_setup(cpu_nr);
}
static const struct of_device_id mpc85xx_smp_guts_ids[] = {
{ .compatible = "fsl,mpc8572-guts", },
{ .compatible = "fsl,p1020-guts", },
......@@ -412,13 +415,14 @@ void __init mpc85xx_smp_init(void)
{
struct device_node *np;
smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
np = of_find_node_by_type(NULL, "open-pic");
if (np) {
smp_85xx_ops.probe = smp_mpic_probe;
smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
smp_85xx_ops.message_pass = smp_mpic_message_pass;
}
} else
smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
if (cpu_has_feature(CPU_FTR_DBELL)) {
/*
......@@ -427,6 +431,7 @@ void __init mpc85xx_smp_init(void)
*/
smp_85xx_ops.message_pass = NULL;
smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
smp_85xx_ops.probe = NULL;
}
np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
......
/*
* Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
*
* Author: Michael Johnston <michael.johnston@freescale.com>
*
* Description:
* TWR-P102x Board Setup
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/pci-bridge.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "smp.h"
#include "mpc85xx.h"
static void __init twr_p1025_pic_init(void)
{
struct mpic *mpic;
#ifdef CONFIG_QUICC_ENGINE
struct device_node *np;
#endif
mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (np) {
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
of_node_put(np);
} else
pr_err("Could not find qe-ic node\n");
#endif
}
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init twr_p1025_setup_arch(void)
{
#ifdef CONFIG_QUICC_ENGINE
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("twr_p1025_setup_arch()", 0);
mpc85xx_smp_init();
fsl_pci_assign_primary();
#ifdef CONFIG_QUICC_ENGINE
mpc85xx_qe_init();
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
if (machine_is(twr_p1025)) {
struct ccsr_guts __iomem *guts;
np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts");
if (np) {
guts = of_iomap(np, 0);
if (!guts)
pr_err("twr_p1025: could not map global utilities register\n");
else {
/* P1025 has pins muxed for QE and other functions. To
* enable QE UEC mode, we need to set bit QE0 for UCC1
* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
* and QE12 for QE MII management signals in PMUXCR
* register.
* Set QE mux bits in PMUXCR */
setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
MPC85xx_PMUXCR_QE(3) |
MPC85xx_PMUXCR_QE(9) |
MPC85xx_PMUXCR_QE(12));
iounmap(guts);
#if defined(CONFIG_SERIAL_QE)
/* On P1025TWR board, the UCC7 acted as UART port.
* However, The UCC7's CTS pin is low level in default,
* it will impact the transmission in full duplex
* communication. So disable the Flow control pin PA18.
* The UCC7 UART just can use RXD and TXD pins.
*/
par_io_config_pin(0, 18, 0, 0, 0, 0);
#endif
/* Drive PB29 to CPLD low - CPLD will then change
* muxing from LBC to QE */
par_io_config_pin(1, 29, 1, 0, 0, 0);
par_io_data_set(1, 29, 0);
}
of_node_put(np);
}
}
#endif
#endif /* CONFIG_QUICC_ENGINE */
pr_info("TWR-P1025 board from Freescale Semiconductor\n");
}
machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices);
static int __init twr_p1025_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,TWR-P1025");
}
define_machine(twr_p1025) {
.name = "TWR-P1025",
.probe = twr_p1025_probe,
.setup_arch = twr_p1025_setup_arch,
.init_IRQ = twr_p1025_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
......@@ -67,6 +67,18 @@ config PPC_C2K
This option enables support for the GE Fanuc C2K board (formerly
an SBS board).
config MVME5100
bool "Motorola/Emerson MVME5100"
depends on EMBEDDED6xx
select MPIC
select PCI
select PPC_INDIRECT_PCI
select PPC_I8259
select PPC_NATIVE
help
This option enables support for the Motorola (now Emerson) MVME5100
board.
config TSI108_BRIDGE
bool
select PCI
......@@ -113,4 +125,3 @@ config WII
help
Select WII if configuring for the Nintendo Wii.
More information at: <http://gc-linux.sourceforge.net/>
......@@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o
obj-$(CONFIG_WII) += wii.o hlwd-pic.o
obj-$(CONFIG_MVME5100) += mvme5100.o
/*
* Board setup routines for the Motorola/Emerson MVME5100.
*
* Copyright 2013 CSC Australia Pty. Ltd.
*
* Based on earlier code by:
*
* Matt Porter, MontaVista Software Inc.
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Author: Stephen Chivers <schivers@csc.com>
*
*/
#include <linux/of_platform.h>
#include <asm/i8259.h>
#include <asm/pci-bridge.h>
#include <asm/mpic.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#define HAWK_MPIC_SIZE 0x00040000U
#define MVME5100_PCI_MEM_OFFSET 0x00000000
/* Board register addresses. */
#define BOARD_STATUS_REG 0xfef88080
#define BOARD_MODFAIL_REG 0xfef88090
#define BOARD_MODRST_REG 0xfef880a0
#define BOARD_TBEN_REG 0xfef880c0
#define BOARD_SW_READ_REG 0xfef880e0
#define BOARD_GEO_ADDR_REG 0xfef880e8
#define BOARD_EXT_FEATURE1_REG 0xfef880f0
#define BOARD_EXT_FEATURE2_REG 0xfef88100
static phys_addr_t pci_membase;
static u_char *restart;
static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int cascade_irq = i8259_irq();
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
chip->irq_eoi(&desc->irq_data);
}
static void __init mvme5100_pic_init(void)
{
struct mpic *mpic;
struct device_node *np;
struct device_node *cp = NULL;
unsigned int cirq;
unsigned long intack = 0;
const u32 *prop = NULL;
np = of_find_node_by_type(NULL, "open-pic");
if (!np) {
pr_err("Could not find open-pic node\n");
return;
}
mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
mpic_assign_isu(mpic, 0, pci_membase + 0x10000);
mpic_init(mpic);
cp = of_find_compatible_node(NULL, NULL, "chrp,iic");
if (cp == NULL) {
pr_warn("mvme5100_pic_init: couldn't find i8259\n");
return;
}
cirq = irq_of_parse_and_map(cp, 0);
if (cirq == NO_IRQ) {
pr_warn("mvme5100_pic_init: no cascade interrupt?\n");
return;
}
np = of_find_compatible_node(NULL, "pci", "mpc10x-pci");
if (np) {
prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
if (prop)
intack = prop[0];
of_node_put(np);
}
if (intack)
pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n",
intack);
i8259_init(cp, intack);
of_node_put(cp);
irq_set_chained_handler(cirq, mvme5100_8259_cascade);
}
static int __init mvme5100_add_bridge(struct device_node *dev)
{
const int *bus_range;
int len;
struct pci_controller *hose;
unsigned short devid;
pr_info("Adding PCI host bridge %s\n", dev->full_name);
bus_range = of_get_property(dev, "bus-range", &len);
hose = pcibios_alloc_controller(dev);
if (hose == NULL)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0);
pci_process_bridge_OF_ranges(hose, dev, 1);
early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid);
if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) {
pr_err("HAWK PHB not present?\n");
return 0;
}
early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
if (pci_membase == 0) {
pr_err("HAWK PHB mibar not correctly set?\n");
return 0;
}
pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase);
return 0;
}
static struct of_device_id mvme5100_of_bus_ids[] __initdata = {
{ .compatible = "hawk-bridge", },
{},
};
/*
* Setup the architecture
*/
static void __init mvme5100_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mvme5100_setup_arch()", 0);
for_each_compatible_node(np, "pci", "hawk-pci")
mvme5100_add_bridge(np);
restart = ioremap(BOARD_MODRST_REG, 4);
}
static void mvme5100_show_cpuinfo(struct seq_file *m)
{
seq_puts(m, "Vendor\t\t: Motorola/Emerson\n");
seq_puts(m, "Machine\t\t: MVME5100\n");
}
static void mvme5100_restart(char *cmd)
{
local_irq_disable();
mtmsr(mfmsr() | MSR_IP);
out_8((u_char *) restart, 0x01);
while (1)
;
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init mvme5100_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MVME5100");
}
static int __init probe_of_platform_devices(void)
{
of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL);
return 0;
}
machine_device_initcall(mvme5100, probe_of_platform_devices);
define_machine(mvme5100) {
.name = "MVME5100",
.probe = mvme5100_probe,
.setup_arch = mvme5100_setup_arch,
.init_IRQ = mvme5100_pic_init,
.show_cpuinfo = mvme5100_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = mvme5100_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
......@@ -214,10 +214,14 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
struct fsl_lbc_ctrl *ctrl = data;
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
u32 status;
unsigned long flags;
spin_lock_irqsave(&fsl_lbc_lock, flags);
status = in_be32(&lbc->ltesr);
if (!status)
if (!status) {
spin_unlock_irqrestore(&fsl_lbc_lock, flags);
return IRQ_NONE;
}
out_be32(&lbc->ltesr, LTESR_CLEAR);
out_be32(&lbc->lteatr, 0);
......@@ -260,6 +264,7 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
if (status & ~LTESR_MASK)
dev_err(ctrl->dev, "Unknown error: "
"LTESR 0x%08X\n", status);
spin_unlock_irqrestore(&fsl_lbc_lock, flags);
return IRQ_HANDLED;
}
......@@ -298,8 +303,8 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev)
goto err;
}
fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
if (fsl_lbc_ctrl_dev->irq == NO_IRQ) {
fsl_lbc_ctrl_dev->irq[0] = irq_of_parse_and_map(dev->dev.of_node, 0);
if (!fsl_lbc_ctrl_dev->irq[0]) {
dev_err(&dev->dev, "failed to get irq resource\n");
ret = -ENODEV;
goto err;
......@@ -311,20 +316,34 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev)
if (ret < 0)
goto err;
ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0,
ret = request_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_irq, 0,
"fsl-lbc", fsl_lbc_ctrl_dev);
if (ret != 0) {
dev_err(&dev->dev, "failed to install irq (%d)\n",
fsl_lbc_ctrl_dev->irq);
ret = fsl_lbc_ctrl_dev->irq;
fsl_lbc_ctrl_dev->irq[0]);
ret = fsl_lbc_ctrl_dev->irq[0];
goto err;
}
fsl_lbc_ctrl_dev->irq[1] = irq_of_parse_and_map(dev->dev.of_node, 1);
if (fsl_lbc_ctrl_dev->irq[1]) {
ret = request_irq(fsl_lbc_ctrl_dev->irq[1], fsl_lbc_ctrl_irq,
IRQF_SHARED, "fsl-lbc-err", fsl_lbc_ctrl_dev);
if (ret) {
dev_err(&dev->dev, "failed to install irq (%d)\n",
fsl_lbc_ctrl_dev->irq[1]);
ret = fsl_lbc_ctrl_dev->irq[1];
goto err1;
}
}
/* Enable interrupts for any detected events */
out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE);
return 0;
err1:
free_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_dev);
err:
iounmap(fsl_lbc_ctrl_dev->regs);
kfree(fsl_lbc_ctrl_dev);
......
......@@ -454,7 +454,7 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus)
}
}
int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
int fsl_add_bridge(struct platform_device *pdev, int is_primary)
{
int len;
struct pci_controller *hose;
......@@ -1035,6 +1035,7 @@ static const struct of_device_id pci_ids[] = {
{ .compatible = "fsl,mpc8548-pcie", },
{ .compatible = "fsl,mpc8610-pci", },
{ .compatible = "fsl,mpc8641-pcie", },
{ .compatible = "fsl,qoriq-pcie", },
{ .compatible = "fsl,qoriq-pcie-v2.1", },
{ .compatible = "fsl,qoriq-pcie-v2.2", },
{ .compatible = "fsl,qoriq-pcie-v2.3", },
......
......@@ -152,9 +152,7 @@ static struct pci_ops indirect_pci_ops =
.write = indirect_write_config,
};
void __init
setup_indirect_pci(struct pci_controller* hose,
resource_size_t cfg_addr,
void setup_indirect_pci(struct pci_controller *hose, resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags)
{
resource_size_t base = cfg_addr & PAGE_MASK;
......
......@@ -41,6 +41,7 @@
#define MPIC_TIMER_TCR_ROVR_OFFSET 24
#define TIMER_STOP 0x80000000
#define GTCCR_TOG 0x80000000
#define TIMERS_PER_GROUP 4
#define MAX_TICKS (~0U >> 1)
#define MAX_TICKS_CASCADE (~0U)
......@@ -96,6 +97,9 @@ static void convert_ticks_to_time(struct timer_group_priv *priv,
time->tv_sec = (__kernel_time_t)div_u64(ticks, priv->timerfreq);
tmp_sec = (u64)time->tv_sec * (u64)priv->timerfreq;
time->tv_usec = 0;
if (tmp_sec <= ticks)
time->tv_usec = (__kernel_suseconds_t)
div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq);
......@@ -327,11 +331,13 @@ void mpic_get_remain_time(struct mpic_timer *handle, struct timeval *time)
casc_priv = priv->timer[handle->num].cascade_handle;
if (casc_priv) {
tmp_ticks = in_be32(&priv->regs[handle->num].gtccr);
tmp_ticks &= ~GTCCR_TOG;
ticks = ((u64)tmp_ticks & UINT_MAX) * (u64)MAX_TICKS_CASCADE;
tmp_ticks = in_be32(&priv->regs[handle->num - 1].gtccr);
ticks += tmp_ticks;
} else {
ticks = in_be32(&priv->regs[handle->num].gtccr);
ticks &= ~GTCCR_TOG;
}
convert_ticks_to_time(priv, ticks, time);
......
......@@ -366,7 +366,7 @@ config TRACE_SINK
"Trace data router for MIPI P1149.7 cJTAG standard".
config PPC_EPAPR_HV_BYTECHAN
tristate "ePAPR hypervisor byte channel driver"
bool "ePAPR hypervisor byte channel driver"
depends on PPC
select EPAPR_PARAVIRT
help
......
......@@ -116,6 +116,7 @@ extern const void *of_flat_dt_match_machine(const void *default_match,
extern void unflatten_device_tree(void);
extern void unflatten_and_copy_device_tree(void);
extern void early_init_devtree(void *);
extern void early_get_first_memblock_info(void *, phys_addr_t *);
#else /* CONFIG_OF_FLATTREE */
static inline const char *of_flat_dt_get_machine_name(void) { return NULL; }
static inline void unflatten_device_tree(void) {}
......
......@@ -685,7 +685,7 @@ do { \
else \
{ \
r = 0; \
if (X##_s) \
if (!X##_s) \
r = ~r; \
} \
FP_SET_EXCEPTION(FP_EX_INVALID); \
......@@ -743,12 +743,17 @@ do { \
} \
else \
{ \
int _lz0, _lz1; \
if (X##_e <= -_FP_WORKBITS - 1) \
_FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc); \
else \
_FP_FRAC_SRS_##wc(X, _FP_FRACBITS_##fs - 1 - X##_e, \
_FP_WFRACBITS_##fs); \
_FP_FRAC_CLZ_##wc(_lz0, X); \
_FP_ROUND(wc, X); \
_FP_FRAC_CLZ_##wc(_lz1, X); \
if (_lz1 < _lz0) \
X##_e++; /* For overflow detection. */ \
_FP_FRAC_SRL_##wc(X, _FP_WORKBITS); \
_FP_FRAC_ASSEMBLE_##wc(r, X, rsize); \
} \
......@@ -762,7 +767,7 @@ do { \
if (!rsigned) \
{ \
r = 0; \
if (X##_s) \
if (!X##_s) \
r = ~r; \
} \
else if (rsigned != 2) \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment