Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal updates from Zhang Rui:

 - Fix a regression where bogus trip points on some Lenovo laptops start
   to screw up thermal control after commit 81ad4276 ("Thermal:
   initialize thermal zone device correctly").

   On these Lenovo laptops, a bogus passive trip point is reported,
   which is 0 degree Celsius.  Without commit 81ad4276, thermal zone
   fails to set cooling devices to proper cooling state, which is a bug.
   But with commit 81ad4276 applied, the processors are always
   throttled on these Lenovo laptops because the current temperature is
   always higher than the passive trip point.

   Fix things to ignore such bogus trip points.  (Zhang Rui)

 - Introduce Mediatek thermal driver.  (Sascha Hauer)

 - Introduce devm_ versions of OF thermal sensor register API.  (Laxman
   Dewangan)

 - Changes in Kconfigs to allow compile test on UM arch.  (Krzysztof
   Kozlowski)

 - Introduce Skylake support in intel_pch_thermal driver.  (Srinivas
   Pandruvada)

 - Several small fixes on Rockchip, TI-SoC, Tegra, RCar, and Exynos
   thermal drivers.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (26 commits)
  Thermal: Ignore invalid trip points
  thermal: trace: migrating thermal traces to use TRACE_DEFINE_ENUM() macros
  thermal: intel_pch_thermal: Enable Skylake PCH thermal
  thermal: doc: Add details of devm_thermal_zone_of_sensor_{register,unregister}
  thermal: of-thermal: Add devm version of thermal_zone_of_sensor_register
  thermal: doc: Add details of thermal_zone_of_sensor_{register,unregister}
  thermal: exynos: Defer probe if vtmu is present but not registered
  thermal: exynos: Use devm_regulator_get_optional() for vtmu
  thermal: exynos: List vtmu-supply as optional property in DT binding
  thermal: exynos: Print a message about exceeded number of supported trip-points
  thermal: exynos: Document number of supported trip-points
  thermal: exynos: Document compatible for Exynos5433 TMU
  thermal: mtk: allow compile testing on UM
  thermal: tegra_soctherm: fix sign bit of temperature
  thermal: Fix build error of missing devm_ioremap_resource on UM
  thermal: ti-soc-thermal: clean up the error handling a bit
  thermal: rcar: Use ARCH_RENESAS
  thermal: rcar_thermal: don't open code of_device_get_match_data()
  thermal: db8500_cpufreq_cooling: Compile with COMPILE_TEST
  thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399
  ...

Documentation/devicetree/bindings/thermal/exynos-thermal.txt

@@ -11,6 +11,7 @@
 	       "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
 	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
 			Exynos5420 (Must pass triminfo base and triminfo clock)
+               "samsung,exynos5433-tmu"
 	       "samsung,exynos5440-tmu"
 	       "samsung,exynos7-tmu"
 - interrupt-parent : The phandle for the interrupt controller
@@ -40,9 +41,14 @@
 		for current TMU channel
 	-- "tmu_sclk" clock for functional operation of the current TMU
 		channel
-- vtmu-supply: This entry is optional and provides the regulator node supplying
-		voltage to TMU. If needed this entry can be placed inside
-		board/platform specific dts file.
+
+The Exynos TMU supports generating interrupts when reaching given
+temperature thresholds. Number of supported thermal trip points depends
+on the SoC (only first trip points defined in DT will be configured):
+ - most of SoC: 4
+ - samsung,exynos5433-tmu: 8
+ - samsung,exynos7-tmu: 8
+
 Following properties are mandatory (depending on SoC):
 - samsung,tmu_gain: Gain value for internal TMU operation.
 - samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
@@ -56,6 +62,12 @@ Following properties are mandatory (depending on SoC):
 - samsung,tmu_default_temp_offset: Default temperature offset
 - samsung,tmu_cal_type: Callibration type
 
+** Optional properties:
+
+- vtmu-supply: This entry is optional and provides the regulator node supplying
+		voltage to TMU. If needed this entry can be placed inside
+		board/platform specific dts file.
+
 Example 1):
 
 	tmu@100C0000 {

Documentation/devicetree/bindings/thermal/mediatek-thermal.txt

+* Mediatek Thermal
+
+This describes the device tree binding for the Mediatek thermal controller
+which measures the on-SoC temperatures. This device does not have its own ADC,
+instead it directly controls the AUXADC via AHB bus accesses. For this reason
+this device needs phandles to the AUXADC. Also it controls a mux in the
+apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
+is also needed.
+
+Required properties:
+- compatible: "mediatek,mt8173-thermal"
+- reg: Address range of the thermal controller
+- interrupts: IRQ for the thermal controller
+- clocks, clock-names: Clocks needed for the thermal controller. required
+                       clocks are:
+		       "therm":	 Main clock needed for register access
+		       "auxadc": The AUXADC clock
+- resets: Reference to the reset controller controlling the thermal controller.
+- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
+- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
+- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description.
+
+Optional properties:
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+               unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
+
+Example:
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt8173-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration_data>;
+		nvmem-cell-names = "calibration-data";
+	};

Documentation/thermal/sysfs-api.txt

@@ -72,6 +72,74 @@ temperature) and throttle appropriate devices.
     It deletes the corresponding entry form /sys/class/thermal folder and
     unbind all the thermal cooling devices it uses.
 
+1.1.3 struct thermal_zone_device *thermal_zone_of_sensor_register(
+		struct device *dev, int sensor_id, void *data,
+		const struct thermal_zone_of_device_ops *ops)
+
+	This interface adds a new sensor to a DT thermal zone.
+	This function will search the list of thermal zones described in
+	device tree and look for the zone that refer to the sensor device
+	pointed by dev->of_node as temperature providers. For the zone
+	pointing to the sensor node, the sensor will be added to the DT
+	thermal zone device.
+
+	The parameters for this interface are:
+	dev:		Device node of sensor containing valid node pointer in
+			dev->of_node.
+	sensor_id:	a sensor identifier, in case the sensor IP has more
+			than one sensors
+	data:		a private pointer (owned by the caller) that will be
+			passed back, when a temperature reading is needed.
+	ops:		struct thermal_zone_of_device_ops *.
+
+			get_temp:	a pointer to a function that reads the
+					sensor temperature. This is mandatory
+					callback provided by sensor driver.
+			get_trend: 	a pointer to a function that reads the
+					sensor temperature trend.
+			set_emul_temp:	a pointer to a function that sets
+					sensor emulated temperature.
+	The thermal zone temperature is provided by the get_temp() function
+	pointer of thermal_zone_of_device_ops. When called, it will
+	have the private pointer @data back.
+
+	It returns error pointer if fails otherwise valid thermal zone device
+	handle. Caller should check the return handle with IS_ERR() for finding
+	whether success or not.
+
+1.1.4 void thermal_zone_of_sensor_unregister(struct device *dev,
+		struct thermal_zone_device *tzd)
+
+	This interface unregisters a sensor from a DT thermal zone which was
+	successfully added by interface thermal_zone_of_sensor_register().
+	This function removes the sensor callbacks and private data from the
+	thermal zone device registered with thermal_zone_of_sensor_register()
+	interface. It will also silent the zone by remove the .get_temp() and
+	get_trend() thermal zone device callbacks.
+
+1.1.5 struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
+		struct device *dev, int sensor_id,
+		void *data, const struct thermal_zone_of_device_ops *ops)
+
+	This interface is resource managed version of
+	thermal_zone_of_sensor_register().
+	All details of thermal_zone_of_sensor_register() described in
+	section 1.1.3 is applicable here.
+	The benefit of using this interface to register sensor is that it
+	is not require to explicitly call thermal_zone_of_sensor_unregister()
+	in error path or during driver unbinding as this is done by driver
+	resource manager.
+
+1.1.6 void devm_thermal_zone_of_sensor_unregister(struct device *dev,
+		struct thermal_zone_device *tzd)
+
+	This interface is resource managed version of
+	thermal_zone_of_sensor_unregister().
+	All details of thermal_zone_of_sensor_unregister() described in
+	section 1.1.4 is applicable here.
+	Normally this function will not need to be called and the resource
+	management code will ensure that the resource is freed.
+
 1.2 thermal cooling device interface
 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
 		void *devdata, struct thermal_cooling_device_ops *)

drivers/thermal/Kconfig

@@ -178,6 +178,7 @@ config THERMAL_EMULATION
 config HISI_THERMAL
 	tristate "Hisilicon thermal driver"
 	depends on (ARCH_HISI && CPU_THERMAL && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Enable this to plug hisilicon's thermal sensor driver into the Linux
 	  thermal framework. cpufreq is used as the cooling device to throttle
@@ -197,6 +198,7 @@ config IMX_THERMAL
 config SPEAR_THERMAL
 	tristate "SPEAr thermal sensor driver"
 	depends on PLAT_SPEAR || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on OF
 	help
 	  Enable this to plug the SPEAr thermal sensor driver into the Linux
@@ -206,6 +208,7 @@ config ROCKCHIP_THERMAL
 	tristate "Rockchip thermal driver"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	depends on RESET_CONTROLLER
+	depends on HAS_IOMEM
 	help
 	  Rockchip thermal driver provides support for Temperature sensor
 	  ADC (TS-ADC) found on Rockchip SoCs. It supports one critical
@@ -214,7 +217,7 @@ config ROCKCHIP_THERMAL
 
 config RCAR_THERMAL
 	tristate "Renesas R-Car thermal driver"
-	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
@@ -223,6 +226,7 @@ config RCAR_THERMAL
 config KIRKWOOD_THERMAL
 	tristate "Temperature sensor on Marvell Kirkwood SoCs"
 	depends on MACH_KIRKWOOD || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on OF
 	help
 	  Support for the Kirkwood thermal sensor driver into the Linux thermal
@@ -231,6 +235,7 @@ config KIRKWOOD_THERMAL
 config DOVE_THERMAL
 	tristate "Temperature sensor on Marvell Dove SoCs"
 	depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on OF
 	help
 	  Support for the Dove thermal sensor driver in the Linux thermal
@@ -249,6 +254,7 @@ config DB8500_THERMAL
 config ARMADA_THERMAL
 	tristate "Armada 370/XP thermal management"
 	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on OF
 	help
 	  Enable this option if you want to have support for thermal management
@@ -266,7 +272,8 @@ config TEGRA_SOCTHERM
 
 config DB8500_CPUFREQ_COOLING
 	tristate "DB8500 cpufreq cooling"
-	depends on ARCH_U8500
+	depends on ARCH_U8500 || COMPILE_TEST
+	depends on HAS_IOMEM
 	depends on CPU_THERMAL
 	default y
 	help
@@ -365,8 +372,18 @@ config INTEL_PCH_THERMAL
 	  Thermal reporting device will provide temperature reading,
 	  programmable trip points and other information.
 
+config MTK_THERMAL
+	tristate "Temperature sensor driver for mediatek SoCs"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on HAS_IOMEM
+	default y
+	help
+	  Enable this option if you want to have support for thermal management
+	  controller present in Mediatek SoCs
+
 menu "Texas Instruments thermal drivers"
 depends on ARCH_HAS_BANDGAP || COMPILE_TEST
+depends on HAS_IOMEM
 source "drivers/thermal/ti-soc-thermal/Kconfig"
 endmenu
 

drivers/thermal/Makefile

@@ -48,3 +48,4 @@ obj-$(CONFIG_INTEL_PCH_THERMAL)	+= intel_pch_thermal.o
 obj-$(CONFIG_ST_THERMAL)	+= st/
 obj-$(CONFIG_TEGRA_SOCTHERM)	+= tegra_soctherm.o
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
+obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o

drivers/thermal/intel_pch_thermal.c

@@ -24,6 +24,7 @@
 
 /* Intel PCH thermal Device IDs */
 #define PCH_THERMAL_DID_WPT	0x9CA4 /* Wildcat Point */
+#define PCH_THERMAL_DID_SKL	0x9D31 /* Skylake PCH */
 
 /* Wildcat Point-LP  PCH Thermal registers */
 #define WPT_TEMP	0x0000	/* Temperature */
@@ -201,6 +202,10 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev,
 		ptd->ops = &pch_dev_ops_wpt;
 		dev_name = "pch_wildcat_point";
 		break;
+	case PCH_THERMAL_DID_SKL:
+		ptd->ops = &pch_dev_ops_wpt;
+		dev_name = "pch_skylake";
+		break;
 	default:
 		dev_err(&pdev->dev, "unknown pch thermal device\n");
 		return -ENODEV;
@@ -266,6 +271,7 @@ static void intel_pch_thermal_remove(struct pci_dev *pdev)
 
 static struct pci_device_id intel_pch_thermal_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL) },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);

drivers/thermal/of-thermal.c

@@ -555,6 +555,87 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister);
 
+static void devm_thermal_zone_of_sensor_release(struct device *dev, void *res)
+{
+	thermal_zone_of_sensor_unregister(dev,
+					  *(struct thermal_zone_device **)res);
+}
+
+static int devm_thermal_zone_of_sensor_match(struct device *dev, void *res,
+					     void *data)
+{
+	struct thermal_zone_device **r = res;
+
+	if (WARN_ON(!r || !*r))
+		return 0;
+
+	return *r == data;
+}
+
+/**
+ * devm_thermal_zone_of_sensor_register - Resource managed version of
+ *				thermal_zone_of_sensor_register()
+ * @dev: a valid struct device pointer of a sensor device. Must contain
+ *       a valid .of_node, for the sensor node.
+ * @sensor_id: a sensor identifier, in case the sensor IP has more
+ *	       than one sensors
+ * @data: a private pointer (owned by the caller) that will be passed
+ *	  back, when a temperature reading is needed.
+ * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp.
+ *
+ * Refer thermal_zone_of_sensor_register() for more details.
+ *
+ * Return: On success returns a valid struct thermal_zone_device,
+ * otherwise, it returns a corresponding ERR_PTR(). Caller must
+ * check the return value with help of IS_ERR() helper.
+ * Registered hermal_zone_device device will automatically be
+ * released when device is unbounded.
+ */
+struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
+	struct device *dev, int sensor_id,
+	void *data, const struct thermal_zone_of_device_ops *ops)
+{
+	struct thermal_zone_device **ptr, *tzd;
+
+	ptr = devres_alloc(devm_thermal_zone_of_sensor_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	tzd = thermal_zone_of_sensor_register(dev, sensor_id, data, ops);
+	if (IS_ERR(tzd)) {
+		devres_free(ptr);
+		return tzd;
+	}
+
+	*ptr = tzd;
+	devres_add(dev, ptr);
+
+	return tzd;
+}
+EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_register);
+
+/**
+ * devm_thermal_zone_of_sensor_unregister - Resource managed version of
+ *				thermal_zone_of_sensor_unregister().
+ * @dev: Device for which which resource was allocated.
+ * @tzd: a pointer to struct thermal_zone_device where the sensor is registered.
+ *
+ * This function removes the sensor callbacks and private data from the
+ * thermal zone device registered with devm_thermal_zone_of_sensor_register()
+ * API. It will also silent the zone by remove the .get_temp() and .get_trend()
+ * thermal zone device callbacks.
+ * Normally this function will not need to be called and the resource
+ * management code will ensure that the resource is freed.
+ */
+void devm_thermal_zone_of_sensor_unregister(struct device *dev,
+					    struct thermal_zone_device *tzd)
+{
+	WARN_ON(devres_release(dev, devm_thermal_zone_of_sensor_release,
+			       devm_thermal_zone_of_sensor_match, tzd));
+}
+EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_unregister);
+
 /***   functions parsing device tree nodes   ***/
 
 /**

drivers/thermal/rcar_thermal.c

@@ -430,8 +430,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
-	const struct of_device_id *of_id = of_match_device(rcar_thermal_dt_ids, dev);
-	unsigned long of_data = (unsigned long)of_id->data;
+	unsigned long of_data = (unsigned long)of_device_get_match_data(dev);
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;

drivers/thermal/rockchip_thermal.c

@@ -58,8 +58,8 @@ enum sensor_id {
 
 /**
  * The conversion table has the adc value and temperature.
- * ADC_DECREMENT: the adc value is of diminishing.(e.g. v2_code_table)
- * ADC_INCREMENT: the adc value is incremental.(e.g. v3_code_table)
+ * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
+ * ADC_INCREMENT: the adc value is incremental.(e.g. rk3368_code_table)
  */
 enum adc_sort_mode {
 	ADC_DECREMENT = 0,
@@ -135,7 +135,13 @@ struct rockchip_thermal_data {
 	enum tshut_polarity tshut_polarity;
 };
 
-/* TSADC Sensor info define: */
+/**
+ * TSADC Sensor Register description:
+ *
+ * TSADCV2_* are used for RK3288 SoCs, the other chips can reuse it.
+ * TSADCV3_* are used for newer SoCs than RK3288. (e.g: RK3228, RK3399)
+ *
+ */
 #define TSADCV2_AUTO_CON			0x04
 #define TSADCV2_INT_EN				0x08
 #define TSADCV2_INT_PD				0x0c
@@ -149,13 +155,20 @@ struct rockchip_thermal_data {
 #define TSADCV2_AUTO_EN				BIT(0)
 #define TSADCV2_AUTO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_AUTO_TSHUT_POLARITY_HIGH	BIT(8)
+/**
+ * TSADCV1_AUTO_Q_SEL_EN:
+ * whether select (1024 - tsadc_q) as output
+ * 1'b0:use tsadc_q as output(temperature-code is rising sequence)
+ * 1'b1:use(1024 - tsadc_q) as output (temperature-code is falling sequence)
+ */
+#define TSADCV3_AUTO_Q_SEL_EN			BIT(1)
 
 #define TSADCV2_INT_SRC_EN(chn)			BIT(chn)
 #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
 
-#define TSADCV1_INT_PD_CLEAR_MASK		~BIT(16)
 #define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
+#define TSADCV3_INT_PD_CLEAR_MASK		~BIT(16)
 
 #define TSADCV2_DATA_MASK			0xfff
 #define TSADCV3_DATA_MASK			0x3ff
@@ -177,45 +190,46 @@ struct tsadc_table {
  * linearly interpolated.
  * Code to Temperature mapping should be updated based on sillcon results.
  */
-static const struct tsadc_table v1_code_table[] = {
-	{TSADCV3_DATA_MASK, -40000},
-	{436, -40000},
-	{431, -35000},
-	{426, -30000},
-	{421, -25000},
-	{416, -20000},
-	{411, -15000},
-	{406, -10000},
-	{401, -5000},
-	{395, 0},
-	{390, 5000},
-	{385, 10000},
-	{380, 15000},
-	{375, 20000},
-	{370, 25000},
-	{364, 30000},
-	{359, 35000},
-	{354, 40000},
-	{349, 45000},
-	{343, 50000},
-	{338, 55000},
-	{333, 60000},
-	{328, 65000},
-	{322, 70000},
-	{317, 75000},
-	{312, 80000},
-	{307, 85000},
-	{301, 90000},
-	{296, 95000},
-	{291, 100000},
-	{286, 105000},
-	{280, 110000},
-	{275, 115000},
-	{270, 120000},
-	{264, 125000},
+static const struct tsadc_table rk3228_code_table[] = {
+	{0, -40000},
+	{588, -40000},
+	{593, -35000},
+	{598, -30000},
+	{603, -25000},
+	{608, -20000},
+	{613, -15000},
+	{618, -10000},
+	{623, -5000},
+	{629, 0},
+	{634, 5000},
+	{639, 10000},
+	{644, 15000},
+	{649, 20000},
+	{654, 25000},
+	{660, 30000},
+	{665, 35000},
+	{670, 40000},
+	{675, 45000},
+	{681, 50000},
+	{686, 55000},
+	{691, 60000},
+	{696, 65000},
+	{702, 70000},
+	{707, 75000},
+	{712, 80000},
+	{717, 85000},
+	{723, 90000},
+	{728, 95000},
+	{733, 100000},
+	{738, 105000},
+	{744, 110000},
+	{749, 115000},
+	{754, 120000},
+	{760, 125000},
+	{TSADCV2_DATA_MASK, 125000},
 };
 
-static const struct tsadc_table v2_code_table[] = {
+static const struct tsadc_table rk3288_code_table[] = {
 	{TSADCV2_DATA_MASK, -40000},
 	{3800, -40000},
 	{3792, -35000},
@@ -253,7 +267,7 @@ static const struct tsadc_table v2_code_table[] = {
 	{3421, 125000},
 };
 
-static const struct tsadc_table v3_code_table[] = {
+static const struct tsadc_table rk3368_code_table[] = {
 	{0, -40000},
 	{106, -40000},
 	{108, -35000},
@@ -292,42 +306,43 @@ static const struct tsadc_table v3_code_table[] = {
 	{TSADCV3_DATA_MASK, 125000},
 };
 
-static const struct tsadc_table v4_code_table[] = {
-	{TSADCV3_DATA_MASK, -40000},
-	{431, -40000},
-	{426, -35000},
-	{421, -30000},
-	{415, -25000},
-	{410, -20000},
-	{405, -15000},
-	{399, -10000},
-	{394, -5000},
-	{389, 0},
-	{383, 5000},
-	{378, 10000},
-	{373, 15000},
-	{367, 20000},
-	{362, 25000},
-	{357, 30000},
-	{351, 35000},
-	{346, 40000},
-	{340, 45000},
-	{335, 50000},
-	{330, 55000},
-	{324, 60000},
-	{319, 65000},
-	{313, 70000},
-	{308, 75000},
-	{302, 80000},
-	{297, 85000},
-	{291, 90000},
-	{286, 95000},
-	{281, 100000},
-	{275, 105000},
-	{270, 110000},
-	{264, 115000},
-	{259, 120000},
-	{253, 125000},
+static const struct tsadc_table rk3399_code_table[] = {
+	{0, -40000},
+	{593, -40000},
+	{598, -35000},
+	{603, -30000},
+	{609, -25000},
+	{614, -20000},
+	{619, -15000},
+	{625, -10000},
+	{630, -5000},
+	{635, 0},
+	{641, 5000},
+	{646, 10000},
+	{651, 15000},
+	{657, 20000},
+	{662, 25000},
+	{667, 30000},
+	{673, 35000},
+	{678, 40000},
+	{684, 45000},
+	{689, 50000},
+	{694, 55000},
+	{700, 60000},
+	{705, 65000},
+	{711, 70000},
+	{716, 75000},
+	{722, 80000},
+	{727, 85000},
+	{733, 90000},
+	{738, 95000},
+	{743, 100000},
+	{749, 105000},
+	{754, 110000},
+	{760, 115000},
+	{765, 120000},
+	{771, 125000},
+	{TSADCV3_DATA_MASK, 125000},
 };
 
 static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
@@ -411,7 +426,7 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code,
 	 * temperature between 2 table entries is linear and interpolate
 	 * to produce less granular result.
 	 */
-	num = table.id[mid].temp - v2_code_table[mid - 1].temp;
+	num = table.id[mid].temp - table.id[mid - 1].temp;
 	num *= abs(table.id[mid - 1].code - code);
 	denom = abs(table.id[mid - 1].code - table.id[mid].code);
 	*temp = table.id[mid - 1].temp + (num / denom);
@@ -453,20 +468,20 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
 		       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
 }
 
-static void rk_tsadcv1_irq_ack(void __iomem *regs)
+static void rk_tsadcv2_irq_ack(void __iomem *regs)
 {
 	u32 val;
 
 	val = readl_relaxed(regs + TSADCV2_INT_PD);
-	writel_relaxed(val & TSADCV1_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV2_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
 }
 
-static void rk_tsadcv2_irq_ack(void __iomem *regs)
+static void rk_tsadcv3_irq_ack(void __iomem *regs)
 {
 	u32 val;
 
 	val = readl_relaxed(regs + TSADCV2_INT_PD);
-	writel_relaxed(val & TSADCV2_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV3_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
 }
 
 static void rk_tsadcv2_control(void __iomem *regs, bool enable)
@@ -482,6 +497,25 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable)
 	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
 }
 
+/**
+ * @rk_tsadcv3_control:
+ * TSADC controller works at auto mode, and some SoCs need set the tsadc_q_sel
+ * bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output adc value if
+ * setting this bit to enable.
+ */
+static void rk_tsadcv3_control(void __iomem *regs, bool enable)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_AUTO_CON);
+	if (enable)
+		val |= TSADCV2_AUTO_EN | TSADCV3_AUTO_Q_SEL_EN;
+	else
+		val &= ~TSADCV2_AUTO_EN;
+
+	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
+}
+
 static int rk_tsadcv2_get_temp(struct chip_tsadc_table table,
 			       int chn, void __iomem *regs, int *temp)
 {
@@ -531,17 +565,17 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
 	.tshut_temp = 95000,
 
 	.initialize = rk_tsadcv2_initialize,
-	.irq_ack = rk_tsadcv1_irq_ack,
-	.control = rk_tsadcv2_control,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
 	.get_temp = rk_tsadcv2_get_temp,
 	.set_tshut_temp = rk_tsadcv2_tshut_temp,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
 	.table = {
-		.id = v1_code_table,
-		.length = ARRAY_SIZE(v1_code_table),
+		.id = rk3228_code_table,
+		.length = ARRAY_SIZE(rk3228_code_table),
 		.data_mask = TSADCV3_DATA_MASK,
-		.mode = ADC_DECREMENT,
+		.mode = ADC_INCREMENT,
 	},
 };
 
@@ -562,8 +596,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
 	.table = {
-		.id = v2_code_table,
-		.length = ARRAY_SIZE(v2_code_table),
+		.id = rk3288_code_table,
+		.length = ARRAY_SIZE(rk3288_code_table),
 		.data_mask = TSADCV2_DATA_MASK,
 		.mode = ADC_DECREMENT,
 	},
@@ -586,8 +620,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
 	.table = {
-		.id = v3_code_table,
-		.length = ARRAY_SIZE(v3_code_table),
+		.id = rk3368_code_table,
+		.length = ARRAY_SIZE(rk3368_code_table),
 		.data_mask = TSADCV3_DATA_MASK,
 		.mode = ADC_INCREMENT,
 	},
@@ -603,17 +637,17 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
 	.tshut_temp = 95000,
 
 	.initialize = rk_tsadcv2_initialize,
-	.irq_ack = rk_tsadcv1_irq_ack,
-	.control = rk_tsadcv2_control,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
 	.get_temp = rk_tsadcv2_get_temp,
 	.set_tshut_temp = rk_tsadcv2_tshut_temp,
 	.set_tshut_mode = rk_tsadcv2_tshut_mode,
 
 	.table = {
-		.id = v4_code_table,
-		.length = ARRAY_SIZE(v4_code_table),
+		.id = rk3399_code_table,
+		.length = ARRAY_SIZE(rk3399_code_table),
 		.data_mask = TSADCV3_DATA_MASK,
-		.mode = ADC_DECREMENT,
+		.mode = ADC_INCREMENT,
 	},
 };
 
@@ -693,15 +727,14 @@ static int rockchip_configure_from_dt(struct device *dev,
 			 thermal->chip->tshut_temp);
 		thermal->tshut_temp = thermal->chip->tshut_temp;
 	} else {
+		if (shut_temp > INT_MAX) {
+			dev_err(dev, "Invalid tshut temperature specified: %d\n",
+				shut_temp);
+			return -ERANGE;
+		}
 		thermal->tshut_temp = shut_temp;
 	}
 
-	if (thermal->tshut_temp > INT_MAX) {
-		dev_err(dev, "Invalid tshut temperature specified: %d\n",
-			thermal->tshut_temp);
-		return -ERANGE;
-	}
-
 	if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
 		dev_warn(dev,
 			 "Missing tshut mode property, using default (%s)\n",

drivers/thermal/samsung/Kconfig

 config EXYNOS_THERMAL
 	tristate "Exynos thermal management unit driver"
 	depends on THERMAL_OF
+	depends on HAS_IOMEM
 	help
 	  If you say yes here you get support for the TMU (Thermal Management
 	  Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises

drivers/thermal/samsung/exynos_tmu.c

@@ -184,6 +184,7 @@
  * @temp_error2: fused value of the second point trim.
  * @regulator: pointer to the TMU regulator structure.
  * @reg_conf: pointer to structure to register with core thermal.
+ * @ntrip: number of supported trip points.
  * @tmu_initialize: SoC specific TMU initialization method
  * @tmu_control: SoC specific TMU control method
  * @tmu_read: SoC specific TMU temperature read method
@@ -203,6 +204,7 @@ struct exynos_tmu_data {
 	u16 temp_error1, temp_error2;
 	struct regulator *regulator;
 	struct thermal_zone_device *tzd;
+	unsigned int ntrip;
 
 	int (*tmu_initialize)(struct platform_device *pdev);
 	void (*tmu_control)(struct platform_device *pdev, bool on);
@@ -346,6 +348,14 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	int ret;
 
+	if (of_thermal_get_ntrips(data->tzd) > data->ntrip) {
+		dev_info(&pdev->dev,
+			 "More trip points than supported by this TMU.\n");
+		dev_info(&pdev->dev,
+			 "%d trip points should be configured in polling mode.\n",
+			 (of_thermal_get_ntrips(data->tzd) - data->ntrip));
+	}
+
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
 	if (!IS_ERR(data->clk_sec))
@@ -1210,6 +1220,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->tmu_control = exynos4210_tmu_control;
 		data->tmu_read = exynos4210_tmu_read;
 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 4;
 		break;
 	case SOC_ARCH_EXYNOS3250:
 	case SOC_ARCH_EXYNOS4412:
@@ -1222,6 +1233,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->tmu_read = exynos4412_tmu_read;
 		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 4;
 		break;
 	case SOC_ARCH_EXYNOS5433:
 		data->tmu_initialize = exynos5433_tmu_initialize;
@@ -1229,6 +1241,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->tmu_read = exynos4412_tmu_read;
 		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 8;
 		break;
 	case SOC_ARCH_EXYNOS5440:
 		data->tmu_initialize = exynos5440_tmu_initialize;
@@ -1236,6 +1249,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->tmu_read = exynos5440_tmu_read;
 		data->tmu_set_emulation = exynos5440_tmu_set_emulation;
 		data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
+		data->ntrip = 4;
 		break;
 	case SOC_ARCH_EXYNOS7:
 		data->tmu_initialize = exynos7_tmu_initialize;
@@ -1243,6 +1257,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->tmu_read = exynos7_tmu_read;
 		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		data->ntrip = 8;
 		break;
 	default:
 		dev_err(&pdev->dev, "Platform not supported\n");
@@ -1295,7 +1310,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	 * TODO: Add regulator as an SOC feature, so that regulator enable
 	 * is a compulsory call.
 	 */
-	data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
+	data->regulator = devm_regulator_get_optional(&pdev->dev, "vtmu");
 	if (!IS_ERR(data->regulator)) {
 		ret = regulator_enable(data->regulator);
 		if (ret) {
@@ -1303,6 +1318,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 			return ret;
 		}
 	} else {
+		if (PTR_ERR(data->regulator) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
 		dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
 	}
 

drivers/thermal/tegra_soctherm.c

@@ -57,7 +57,7 @@
 #define READBACK_VALUE_MASK			0xff00
 #define READBACK_VALUE_SHIFT			8
 #define READBACK_ADD_HALF			BIT(7)
-#define READBACK_NEGATE				BIT(1)
+#define READBACK_NEGATE				BIT(0)
 
 #define FUSE_TSENSOR8_CALIB			0x180
 #define FUSE_SPARE_REALIGNMENT_REG_0		0x1fc

drivers/thermal/thermal_core.c

@@ -454,6 +454,10 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 {
 	enum thermal_trip_type type;
 
+	/* Ignore disabled trip points */
+	if (test_bit(trip, &tz->trips_disabled))
+		return;
+
 	tz->ops->get_trip_type(tz, trip, &type);
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
@@ -1800,6 +1804,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 {
 	struct thermal_zone_device *tz;
 	enum thermal_trip_type trip_type;
+	int trip_temp;
 	int result;
 	int count;
 	int passive = 0;
@@ -1871,9 +1876,15 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 		goto unregister;
 
 	for (count = 0; count < trips; count++) {
-		tz->ops->get_trip_type(tz, count, &trip_type);
+		if (tz->ops->get_trip_type(tz, count, &trip_type))
+			set_bit(count, &tz->trips_disabled);
 		if (trip_type == THERMAL_TRIP_PASSIVE)
 			passive = 1;
+		if (tz->ops->get_trip_temp(tz, count, &trip_temp))
+			set_bit(count, &tz->trips_disabled);
+		/* Check for bogus trip points */
+		if (trip_temp == 0)
+			set_bit(count, &tz->trips_disabled);
 	}
 
 	if (!passive) {

drivers/thermal/ti-soc-thermal/ti-bandgap.c

@@ -1265,7 +1265,7 @@ static
 int ti_bandgap_probe(struct platform_device *pdev)
 {
 	struct ti_bandgap *bgp;
-	int clk_rate, ret = 0, i;
+	int clk_rate, ret, i;
 
 	bgp = ti_bandgap_build(pdev);
 	if (IS_ERR(bgp)) {
@@ -1288,16 +1288,14 @@ int ti_bandgap_probe(struct platform_device *pdev)
 	}
 
 	bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
-	ret = IS_ERR(bgp->fclock);
-	if (ret) {
+	if (IS_ERR(bgp->fclock)) {
 		dev_err(&pdev->dev, "failed to request fclock reference\n");
 		ret = PTR_ERR(bgp->fclock);
 		goto free_irqs;
 	}
 
 	bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
-	ret = IS_ERR(bgp->div_clk);
-	if (ret) {
+	if (IS_ERR(bgp->div_clk)) {
 		dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
 		ret = PTR_ERR(bgp->div_clk);
 		goto free_irqs;
@@ -1314,7 +1312,7 @@ int ti_bandgap_probe(struct platform_device *pdev)
 		 * may not be accurate
 		 */
 		val = ti_bandgap_readl(bgp, tsr->bgap_efuse);
-		if (ret || !val)
+		if (!val)
 			dev_info(&pdev->dev,
 				 "Non-trimmed BGAP, Temp not accurate\n");
 	}

include/linux/thermal.h

@@ -156,6 +156,7 @@ struct thermal_attr {
  * @trip_hyst_attrs:	attributes for trip points for sysfs: trip hysteresis
  * @devdata:	private pointer for device private data
  * @trips:	number of trip points the thermal zone supports
+ * @trips_disabled;	bitmap for disabled trips
  * @passive_delay:	number of milliseconds to wait between polls when
  *			performing passive cooling.
  * @polling_delay:	number of milliseconds to wait between polls when
@@ -191,6 +192,7 @@ struct thermal_zone_device {
 	struct thermal_attr *trip_hyst_attrs;
 	void *devdata;
 	int trips;
+	unsigned long trips_disabled;	/* bitmap for disabled trips */
 	int passive_delay;
 	int polling_delay;
 	int temperature;
@@ -362,6 +364,11 @@ thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
 				const struct thermal_zone_of_device_ops *ops);
 void thermal_zone_of_sensor_unregister(struct device *dev,
 				       struct thermal_zone_device *tz);
+struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
+		struct device *dev, int id, void *data,
+		const struct thermal_zone_of_device_ops *ops);
+void devm_thermal_zone_of_sensor_unregister(struct device *dev,
+					    struct thermal_zone_device *tz);
 #else
 static inline struct thermal_zone_device *
 thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
@@ -376,6 +383,19 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
 {
 }
 
+static inline struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
+		struct device *dev, int id, void *data,
+		const struct thermal_zone_of_device_ops *ops)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline
+void devm_thermal_zone_of_sensor_unregister(struct device *dev,
+					    struct thermal_zone_device *tz)
+{
+}
+
 #endif
 
 #if IS_ENABLED(CONFIG_THERMAL)

include/trace/events/thermal.h

@@ -8,6 +8,18 @@
 #include <linux/thermal.h>
 #include <linux/tracepoint.h>
 
+TRACE_DEFINE_ENUM(THERMAL_TRIP_CRITICAL);
+TRACE_DEFINE_ENUM(THERMAL_TRIP_HOT);
+TRACE_DEFINE_ENUM(THERMAL_TRIP_PASSIVE);
+TRACE_DEFINE_ENUM(THERMAL_TRIP_ACTIVE);
+
+#define show_tzt_type(type)					\
+	__print_symbolic(type,					\
+			 { THERMAL_TRIP_CRITICAL, "CRITICAL"},	\
+			 { THERMAL_TRIP_HOT,      "HOT"},	\
+			 { THERMAL_TRIP_PASSIVE,  "PASSIVE"},	\
+			 { THERMAL_TRIP_ACTIVE,   "ACTIVE"})
+
 TRACE_EVENT(thermal_temperature,
 
 	TP_PROTO(struct thermal_zone_device *tz),
@@ -73,9 +85,9 @@ TRACE_EVENT(thermal_zone_trip,
 		__entry->trip_type = trip_type;
 	),
 
-	TP_printk("thermal_zone=%s id=%d trip=%d trip_type=%d",
+	TP_printk("thermal_zone=%s id=%d trip=%d trip_type=%s",
 		__get_str(thermal_zone), __entry->id, __entry->trip,
-		__entry->trip_type)
+		show_tzt_type(__entry->trip_type))
 );
 
 TRACE_EVENT(thermal_power_cpu_get_power,