ARM: S3C2410: Remove the users of s3c2410_gpio_pullup()

Remove the last s3c2410_gpio_pullup() users in arch/arm/mach-s3c2410

Note, since mach-h1940.c is setting output and a pull-up, the call
has vbeen chanerd to S3C_GPIO_PULL_NONE instead of S3C_GPIO_PULL_UP.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s3c2410/mach-amlm5900.c

@@ -227,7 +227,7 @@ static void amlm5900_init_pm(void)
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
 		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
-		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
+		s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
 	}
 }
 static void __init amlm5900_init(void)

arch/arm/mach-s3c2410/mach-h1940.c

@@ -209,7 +209,7 @@ static int h1940_backlight_init(struct device *dev)
 	gpio_request(S3C2410_GPB(0), "Backlight");
 
 	gpio_direction_output(S3C2410_GPB(0), 0);
-	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
 
 	return 0;