spi: pxa2xx: Add support for Intel Cannonlake

Intel Cannonlake LPSS SPI has up to four chip selects per port like in
Broxton and is clocked like Sunrisepoint and Kaby Lake. Add a new type
LPSS_CNL_SSP and configuration that enable runtime chip select detection
and use the same FIFO thresholds than in Sunrisepoint.

Patch adds support for both Cannonlake SoC and PCH.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-pxa2xx.c

@@ -151,6 +151,18 @@ static const struct lpss_config lpss_platforms[] = {
 		.cs_sel_shift = 8,
 		.cs_sel_mask = 3 << 8,
 	},
+	{	/* LPSS_CNL_SSP */
+		.offset = 0x200,
+		.reg_general = -1,
+		.reg_ssp = 0x20,
+		.reg_cs_ctrl = 0x24,
+		.reg_capabilities = 0xfc,
+		.rx_threshold = 1,
+		.tx_threshold_lo = 32,
+		.tx_threshold_hi = 56,
+		.cs_sel_shift = 8,
+		.cs_sel_mask = 3 << 8,
+	},
 };
 
 static inline const struct lpss_config
@@ -167,6 +179,7 @@ static bool is_lpss_ssp(const struct driver_data *drv_data)
 	case LPSS_BSW_SSP:
 	case LPSS_SPT_SSP:
 	case LPSS_BXT_SSP:
+	case LPSS_CNL_SSP:
 		return true;
 	default:
 		return false;
@@ -1275,6 +1288,7 @@ static int setup(struct spi_device *spi)
 	case LPSS_BSW_SSP:
 	case LPSS_SPT_SSP:
 	case LPSS_BXT_SSP:
+	case LPSS_CNL_SSP:
 		config = lpss_get_config(drv_data);
 		tx_thres = config->tx_threshold_lo;
 		tx_hi_thres = config->tx_threshold_hi;
@@ -1470,6 +1484,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac6), LPSS_BXT_SSP },
+	/* CNL-LP */
+	{ PCI_VDEVICE(INTEL, 0x9daa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x9dab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x9dfb), LPSS_CNL_SSP },
+	/* CNL-H */
+	{ PCI_VDEVICE(INTEL, 0xa32a), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa32b), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0xa37b), LPSS_CNL_SSP },
 	{ },
 };
 

include/linux/pxa2xx_ssp.h

@@ -196,6 +196,7 @@ enum pxa_ssp_type {
 	LPSS_BSW_SSP,
 	LPSS_SPT_SSP,
 	LPSS_BXT_SSP,
+	LPSS_CNL_SSP,
 };
 
 struct ssp_device {