[ARM] Convert ecard.c shutdown/reboot to use driver model

ecard.c used to use the reboot notifier to ensure that the expansion
cards are in the correct state for rebooting.  Use the driver model
shutdown method instead.

arch/arm/kernel/ecard.c

@@ -37,7 +37,6 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
-#include <linux/notifier.h>
 #include <linux/device.h>
 #include <linux/init.h>
 
@@ -57,7 +56,7 @@
 
 enum req {
 	req_readbytes,
-	req_reset_all
+	req_reset
 };
 
 struct ecard_request {
@@ -131,14 +130,11 @@ slot_to_ecard(unsigned int slot)
 #define POD_INT_ADDR(x)	((volatile unsigned char *)\
 			 ((BUS_ADDR((x)) - IO_BASE) + IO_START))
 
-static inline void ecard_task_reset(void)
+static inline void ecard_task_reset(struct ecard_request *req)
 {
-	ecard_t *ec;
-
-	for (ec = cards; ec; ec = ec->next)
+	struct expansion_card *ec = req->ec;
 	if (ec->loader)
-			ecard_loader_reset(POD_INT_ADDR(ec->podaddr),
-					   ec->loader);
+		ecard_loader_reset(POD_INT_ADDR(ec->podaddr), ec->loader);
 }
 
 static void
@@ -218,8 +214,8 @@ static void ecard_do_request(struct ecard_request *req)
 		ecard_task_readbytes(req);
 		break;
 
-	case req_reset_all:
-		ecard_task_reset();
+	case req_reset:
+		ecard_task_reset(req);
 		break;
 	}
 }
@@ -355,60 +351,6 @@ ecard_call(struct ecard_request *req)
 
 /* ======================= Mid-level card control ===================== */
 
-/*
- * This function is responsible for resetting the expansion cards to a
- * sensible state immediately prior to rebooting the system.  This function
- * has process state (keventd), so we can sleep.
- *
- * Possible "val" values here:
- *  SYS_RESTART   -  restarting system
- *  SYS_HALT      - halting system
- *  SYS_POWER_OFF - powering down system
- *
- * We ignore all calls, unless it is a SYS_RESTART call - power down/halts
- * will be followed by a SYS_RESTART if ctrl-alt-del is pressed again.
- */
-static int ecard_reboot(struct notifier_block *me, unsigned long val, void *v)
-{
-	struct ecard_request req;
-
-	if (val != SYS_RESTART)
-		return 0;
-
-	/*
-	 * Disable the expansion card interrupt
-	 */
-	disable_irq(IRQ_EXPANSIONCARD);
-
-	/*
-	 * If we have any expansion card loader code which will handle
-	 * the reset for us, call it now.
-	 */
-	req.req = req_reset_all;
-	ecard_call(&req);
-
-	/*
-	 * Disable the expansion card interrupt again, just to be sure.
-	 */
-	disable_irq(IRQ_EXPANSIONCARD);
-
-	/*
-	 * Finally, reset the expansion card interrupt mask to
-	 * all enable (RISC OS doesn't set this)
-	 */
-#ifdef HAS_EXPMASK
-	have_expmask = ~0;
-	__raw_writeb(have_expmask, EXPMASK_ENABLE);
-#endif
-	return 0;
-}
-
-static struct notifier_block ecard_reboot_notifier = {
-	.notifier_call	= ecard_reboot,
-};
-
-
-
 static void
 ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
 {
@@ -1083,11 +1025,6 @@ static int __init ecard_init(void)
 {
 	int slot, irqhw;
 
-	/*
-	 * Register our reboot notifier
-	 */
-	register_reboot_notifier(&ecard_reboot_notifier);
-
 #ifdef CONFIG_CPU_32
 	init_waitqueue_head(&ecard_wait);
 #endif
@@ -1158,11 +1095,32 @@ static int ecard_drv_remove(struct device *dev)
 	return 0;
 }
 
+/*
+ * Before rebooting, we must make sure that the expansion card is in a
+ * sensible state, so it can be re-detected.  This means that the first
+ * page of the ROM must be visible.  We call the expansion cards reset
+ * handler, if any.
+ */
+static void ecard_drv_shutdown(struct device *dev)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	struct ecard_driver *drv = ECARD_DRV(dev->driver);
+	struct ecard_request req;
+
+	if (drv->shutdown)
+		drv->shutdown(ec);
+	ecard_release(ec);
+	req.req = req_reset;
+	req.ec = ec;
+	ecard_call(&req);
+}
+
 int ecard_register_driver(struct ecard_driver *drv)
 {
 	drv->drv.bus = &ecard_bus_type;
 	drv->drv.probe = ecard_drv_probe;
 	drv->drv.remove = ecard_drv_remove;
+	drv->drv.shutdown = ecard_drv_shutdown;
 
 	return driver_register(&drv->drv);
 }

include/asm-arm/ecard.h

@@ -267,6 +267,7 @@ extern struct bus_type ecard_bus_type;
 struct ecard_driver {
 	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
 	void			(*remove)(struct expansion_card *);
+	void			(*shutdown)(struct expansion_card *);
 	const struct ecard_id	*id_table;
 	unsigned int		id;
 	struct device_driver	drv;