Commit fcbf6a08 authored by Maurizio Lombardi's avatar Maurizio Lombardi Committed by Jens Axboe

bio: modify __bio_add_page() to accept pages that don't start a new segment

The original behaviour is to refuse to add a new page if the maximum
number of segments has been reached, regardless of the fact the page we
are going to add can be merged into the last segment or not.

Unfortunately, when the system runs under heavy memory fragmentation
conditions, a driver may try to add multiple pages to the last segment.
The original code won't accept them and EBUSY will be reported to
userspace.

This patch modifies the function so it refuses to add a page only in case
the latter starts a new segment and the maximum number of segments has
already been reached.

The bug can be easily reproduced with the st driver:

1) set CONFIG_SCSI_MPT2SAS_MAX_SGE or CONFIG_SCSI_MPT3SAS_MAX_SGE  to 16
2) modprobe st buffer_kbs=1024
3) #dd if=/dev/zero of=/dev/st0 bs=1M count=10
   dd: error writing `/dev/st0': Device or resource busy
Signed-off-by: default avatarMaurizio Lombardi <mlombard@redhat.com>
Signed-off-by: default avatarMing Lei <ming.lei@canonical.com>
Cc: Jet Chen <jet.chen@intel.com>
Cc: Tomas Henzl <thenzl@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
parent 06a41a99
......@@ -748,6 +748,7 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
}
}
bio->bi_iter.bi_size += len;
goto done;
}
......@@ -764,28 +765,31 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
return 0;
/*
* we might lose a segment or two here, but rather that than
* make this too complex.
* setup the new entry, we might clear it again later if we
* cannot add the page
*/
bvec = &bio->bi_io_vec[bio->bi_vcnt];
bvec->bv_page = page;
bvec->bv_len = len;
bvec->bv_offset = offset;
bio->bi_vcnt++;
bio->bi_phys_segments++;
bio->bi_iter.bi_size += len;
while (bio->bi_phys_segments >= queue_max_segments(q)) {
/*
* Perform a recount if the number of segments is greater
* than queue_max_segments(q).
*/
while (bio->bi_phys_segments > queue_max_segments(q)) {
if (retried_segments)
return 0;
goto failed;
retried_segments = 1;
blk_recount_segments(q, bio);
}
/*
* setup the new entry, we might clear it again later if we
* cannot add the page
*/
bvec = &bio->bi_io_vec[bio->bi_vcnt];
bvec->bv_page = page;
bvec->bv_len = len;
bvec->bv_offset = offset;
/*
* if queue has other restrictions (eg varying max sector size
* depending on offset), it can specify a merge_bvec_fn in the
......@@ -795,7 +799,7 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
struct bvec_merge_data bvm = {
.bi_bdev = bio->bi_bdev,
.bi_sector = bio->bi_iter.bi_sector,
.bi_size = bio->bi_iter.bi_size,
.bi_size = bio->bi_iter.bi_size - len,
.bi_rw = bio->bi_rw,
};
......@@ -803,23 +807,25 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
* merge_bvec_fn() returns number of bytes it can accept
* at this offset
*/
if (q->merge_bvec_fn(q, &bvm, bvec) < bvec->bv_len) {
bvec->bv_page = NULL;
bvec->bv_len = 0;
bvec->bv_offset = 0;
return 0;
}
if (q->merge_bvec_fn(q, &bvm, bvec) < bvec->bv_len)
goto failed;
}
/* If we may be able to merge these biovecs, force a recount */
if (bio->bi_vcnt && (BIOVEC_PHYS_MERGEABLE(bvec-1, bvec)))
if (bio->bi_vcnt > 1 && (BIOVEC_PHYS_MERGEABLE(bvec-1, bvec)))
bio->bi_flags &= ~(1 << BIO_SEG_VALID);
bio->bi_vcnt++;
bio->bi_phys_segments++;
done:
bio->bi_iter.bi_size += len;
return len;
failed:
bvec->bv_page = NULL;
bvec->bv_len = 0;
bvec->bv_offset = 0;
bio->bi_vcnt--;
bio->bi_iter.bi_size -= len;
blk_recount_segments(q, bio);
return 0;
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment