input: Enhancements/fixes for PSX pad support:

    * Adds support for more than one controller. Previously more than
      one controller was initialized and the docs said they worked, but
      only one was actually read.                                      
    * Removes unnecessary detection on initialization. This allows the
      module to be initialized without controllers plugged in (hot    
      swapping controllers works). This removes a warning if the user
      has an unrecognized controller plugged in, but the only        
      unrecognized controller I have been able to find information about
      online is the PSX mouse, which I've never actually seen.          
    * Adds a GC_DDR option value to have direction presses register as
      buttons instead of axes. Allows the module to be used for Dance
      Dance Revolution emulators like Stepmania.                     
    * Adds psx_* to documentation.   

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>           

Documentation/input/joystick-parport.txt

@@ -335,6 +335,7 @@ controller (compatible with DirectPadPro):
  * Analog PSX Pad (red mode)
  * Analog PSX Pad (green mode)
  * PSX Rumble Pad
+ * PSX DDR Pad
 
 2.4 Sega
 ~~~~~~~~
@@ -452,14 +453,22 @@ uses the following kernel/module command line:
 	  5  | Multisystem 2-button joystick
 	  6  | N64 pad
 	  7  | Sony PSX controller
+	  8  | Sony PSX DDR controller
 
-  The exact type of the PSX controller type is autoprobed, so you must have
-your controller plugged in before initializing.
+  The exact type of the PSX controller type is autoprobed when used so
+hot swapping should work (but is not recomended).
 
   Should you want to use more than one of parallel ports at once, you can use
 gamecon.map2 and gamecon.map3 as additional command line parameters for two
 more parallel ports.
 
+  There are two options specific to PSX driver portion.  gamecon.psx_delay sets
+the command delay when talking to the controllers. The default of 25 should
+work but you can try lowering it for better performace. If your pads don't
+respond try raising it untill they work. Setting the type to 8 allows the
+driver to be used with Dance Dance Revolution or similar games. Arrow keys are
+registered as key presses instead of X and Y axes.
+
 3.2 db9.c
 ~~~~~~~~~
   Apart from making an interface, there is nothing difficult on using the

drivers/input/joystick/gamecon.c

 /*
- * $Id: gamecon.c,v 1.22 2002/07/01 15:42:25 vojtech Exp $
+ * NES, SNES, N64, MultiSystem, PSX gamepad driver for Linux
  *
- *  Copyright (c) 1999-2001 Vojtech Pavlik
+ *  Copyright (c) 1999-2004 	Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2004 		Peter Nelson <pnelson@andrew.cmu.edu>
  *
  *  Based on the work of:
  *  	Andree Borrmann		John Dahlstrom
  *  	David Kuder		Nathan Hand
  */
 
-/*
- * NES, SNES, N64, MultiSystem, PSX gamepad driver for Linux
- */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -72,8 +69,9 @@ __obsolete_setup("gc_3=");
 #define GC_MULTI2	5
 #define GC_N64		6
 #define GC_PSX		7
+#define GC_DDR		8
 
-#define GC_MAX		7
+#define GC_MAX		8
 
 #define GC_REFRESH_TIME	HZ/100
 
@@ -91,7 +89,8 @@ static struct gc *gc_base[3];
 static int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 };
 
 static char *gc_names[] = { NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick",
-				"Multisystem 2-button joystick", "N64 controller", "PSX controller" };
+				"Multisystem 2-button joystick", "N64 controller", "PSX controller"
+				"PSX DDR controller" };
 /*
  * N64 support.
  */
@@ -237,7 +236,7 @@ static void gc_multi_read_packet(struct gc *gc, int length, unsigned char *data)
 #define GC_PSX_RUMBLE	7		/* Rumble in Red mode */
 
 #define GC_PSX_CLOCK	0x04		/* Pin 4 */
-#define GC_PSX_COMMAND	0x01		/* Pin 1 */
+#define GC_PSX_COMMAND	0x01		/* Pin 2 */
 #define GC_PSX_POWER	0xf8		/* Pins 5-9 */
 #define GC_PSX_SELECT	0x02		/* Pin 3 */
 
@@ -253,25 +252,29 @@ __obsolete_setup("gc_psx_delay=");
 static short gc_psx_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y };
 static short gc_psx_btn[] = { BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y,
 				BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR };
+static short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 };
 
 /*
  * gc_psx_command() writes 8bit command and reads 8bit data from
  * the psx pad.
  */
 
-static int gc_psx_command(struct gc *gc, int b)
+static void gc_psx_command(struct gc *gc, int b, unsigned char data[GC_PSX_LENGTH])
 {
-	int i, cmd, data = 0;
+	int i, j, cmd, read;
+	for (i = 0; i < 5; i++)
+		data[i] = 0;
 
 	for (i = 0; i < 8; i++, b >>= 1) {
 		cmd = (b & 1) ? GC_PSX_COMMAND : 0;
 		parport_write_data(gc->pd->port, cmd | GC_PSX_POWER);
 		udelay(gc_psx_delay);
-		data |= ((parport_read_status(gc->pd->port) ^ 0x80) & gc->pads[GC_PSX]) ? (1 << i) : 0;
+		read = parport_read_status(gc->pd->port) ^ 0x80;
+		for (j = 0; j < 5; j++)
+			data[j] |= (read & gc_status_bit[j] & gc->pads[GC_PSX]) ? (1 << i) : 0;
 		parport_write_data(gc->pd->port, cmd | GC_PSX_CLOCK | GC_PSX_POWER);
 		udelay(gc_psx_delay);
 	}
-	return data;
 }
 
 /*
@@ -279,30 +282,39 @@ static int gc_psx_command(struct gc *gc, int b)
  * device identifier code.
  */
 
-static int gc_psx_read_packet(struct gc *gc, unsigned char *data)
+static void gc_psx_read_packet(struct gc *gc, unsigned char data[5][GC_PSX_LENGTH], unsigned char id[5])
 {
-	int i, id;
+	int i, j, max_len = 0;
 	unsigned long flags;
+	unsigned char data2[5];
 
 	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);	/* Select pad */
-	udelay(gc_psx_delay * 2);
+	udelay(gc_psx_delay);
 	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER);			/* Deselect, begin command */
-	udelay(gc_psx_delay * 2);
+	udelay(gc_psx_delay);
 
 	local_irq_save(flags);
 
-	gc_psx_command(gc, 0x01);							/* Access pad */
-	id = gc_psx_command(gc, 0x42);							/* Get device id */
-	if (gc_psx_command(gc, 0) == 0x5a) {						/* Okay? */
-		for (i = 0; i < GC_PSX_LEN(id) * 2; i++)
-			data[i] = gc_psx_command(gc, 0);
-	} else id = 0;
+	gc_psx_command(gc, 0x01, data2);						/* Access pad */
+	gc_psx_command(gc, 0x42, id);							/* Get device ids */
+	gc_psx_command(gc, 0, data2);							/* Dump status */
+
+	for (i =0; i < 5; i++)								/* Find the longest pad */
+		if((gc_status_bit[i] & gc->pads[GC_PSX]) && (GC_PSX_LEN(id[i]) > max_len))
+			max_len = GC_PSX_LEN(id[i]);
+
+	for (i = 0; i < max_len * 2; i++) {						/* Read in all the data */
+		gc_psx_command(gc, 0, data2);
+		for (j = 0; j < 5; j++)
+			data[j][i] = data2[j];
+	}
 
 	local_irq_restore(flags);
 
 	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);
 
-	return GC_PSX_ID(id);
+	for(i = 0; i < 5; i++)								/* Set id's to the real value */
+		id[i] = GC_PSX_ID(id[i]);
 }
 
 /*
@@ -316,6 +328,7 @@ static void gc_timer(unsigned long private)
 	struct gc *gc = (void *) private;
 	struct input_dev *dev = gc->dev;
 	unsigned char data[GC_MAX_LENGTH];
+	unsigned char data_psx[5][GC_PSX_LENGTH];
 	int i, j, s;
 
 /*
@@ -412,53 +425,72 @@ static void gc_timer(unsigned long private)
  * PSX controllers
  */
 
-	if (gc->pads[GC_PSX]) {
+	if (gc->pads[GC_PSX] || gc->pads[GC_DDR]) {
 
-		for (i = 0; i < 5; i++)
-	       		if (gc->pads[GC_PSX] & gc_status_bit[i])
-				break;
+		gc_psx_read_packet(gc, data_psx, data);
 
- 		switch (gc_psx_read_packet(gc, data)) {
+		for (i = 0; i < 5; i++) {
+	 		switch (data[i]) {
 
-			case GC_PSX_RUMBLE:
+				case GC_PSX_RUMBLE:
 
-				input_report_key(dev + i, BTN_THUMBL, ~data[0] & 0x04);
-				input_report_key(dev + i, BTN_THUMBR, ~data[0] & 0x02);
-				input_sync(dev + i);
+					input_report_key(dev + i, BTN_THUMBL, ~data_psx[i][0] & 0x04);
+					input_report_key(dev + i, BTN_THUMBR, ~data_psx[i][0] & 0x02);
 
-			case GC_PSX_NEGCON:
-			case GC_PSX_ANALOG:
+				case GC_PSX_NEGCON:
+				case GC_PSX_ANALOG:
 
-				for (j = 0; j < 4; j++)
-					input_report_abs(dev + i, gc_psx_abs[j], data[j + 2]);
+					if(gc->pads[GC_DDR] & gc_status_bit[i]) {
+						for(j = 0; j < 4; j++)
+							input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
+					} else {
+						for (j = 0; j < 4; j++)
+							input_report_abs(dev + i, gc_psx_abs[j+2], data_psx[i][j + 2]);
 
-				input_report_abs(dev + i, ABS_HAT0X, !(data[0] & 0x20) - !(data[0] & 0x80));
-				input_report_abs(dev + i, ABS_HAT0Y, !(data[0] & 0x40) - !(data[0] & 0x10));
+						input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
+						input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
+					}
 
-				for (j = 0; j < 8; j++)
-					input_report_key(dev + i, gc_psx_btn[j], ~data[1] & (1 << j));
+					for (j = 0; j < 8; j++)
+						input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
 
-				input_report_key(dev + i, BTN_START,  ~data[0] & 0x08);
-				input_report_key(dev + i, BTN_SELECT, ~data[0] & 0x01);
+					input_report_key(dev + i, BTN_START,  ~data_psx[i][0] & 0x08);
+					input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01);
 
-				input_sync(dev + i);
+					input_sync(dev + i);
 
-				break;
+					break;
 
-			case GC_PSX_NORMAL:
+				case GC_PSX_NORMAL:
+					if(gc->pads[GC_DDR] & gc_status_bit[i]) {
+						for(j = 0; j < 4; j++)
+							input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
+					} else {
+						input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
+						input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
 
-				input_report_abs(dev + i, ABS_X, 128 + !(data[0] & 0x20) * 127 - !(data[0] & 0x80) * 128);
-				input_report_abs(dev + i, ABS_Y, 128 + !(data[0] & 0x40) * 127 - !(data[0] & 0x10) * 128);
+						/* for some reason if the extra axes are left unset they drift */
+						/* for (j = 0; j < 4; j++)
+							input_report_abs(dev + i, gc_psx_abs[j+2], 128);
+						 * This needs to be debugged properly,
+						 * maybe fuzz processing needs to be done in input_sync()
+						 *				 --vojtech
+						 */
+					}
 
-				for (j = 0; j < 8; j++)
-					input_report_key(dev + i, gc_psx_btn[j], ~data[1] & (1 << j));
+					for (j = 0; j < 8; j++)
+						input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
 
-				input_report_key(dev + i, BTN_START,  ~data[0] & 0x08);
-				input_report_key(dev + i, BTN_SELECT, ~data[0] & 0x01);
+					input_report_key(dev + i, BTN_START,  ~data_psx[i][0] & 0x08);
+					input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01);
 
-				input_sync(dev + i);
+					input_sync(dev + i);
 
-				break;
+					break;
+
+				case 0: /* not a pad, ignore */
+					break;
+			}
 		}
 	}
 
@@ -490,8 +522,7 @@ static struct gc __init *gc_probe(int *config, int nargs)
 {
 	struct gc *gc;
 	struct parport *pp;
-	int i, j, psx;
-	unsigned char data[32];
+	int i, j;
 
 	if (config[0] < 0)
 		return NULL;
@@ -588,43 +619,22 @@ static struct gc __init *gc_probe(int *config, int nargs)
 				break;
 
 			case GC_PSX:
-
-				psx = gc_psx_read_packet(gc, data);
-
-				switch(psx) {
-					case GC_PSX_NEGCON:
-					case GC_PSX_NORMAL:
-					case GC_PSX_ANALOG:
-					case GC_PSX_RUMBLE:
-
-						for (j = 0; j < 6; j++) {
-							psx = gc_psx_abs[j];
-							set_bit(psx, gc->dev[i].absbit);
-							if (j < 4) {
-								gc->dev[i].absmin[psx] = 4;
-								gc->dev[i].absmax[psx] = 252;
-								gc->dev[i].absflat[psx] = 2;
-							} else {
-								gc->dev[i].absmin[psx] = -1;
-								gc->dev[i].absmax[psx] = 1;
-							}
-						}
-
-						for (j = 0; j < 12; j++)
-							set_bit(gc_psx_btn[j], gc->dev[i].keybit);
-
-						break;
-
-					case 0:
-						gc->pads[GC_PSX] &= ~gc_status_bit[i];
-						printk(KERN_ERR "gamecon.c: No PSX controller found.\n");
-						break;
-
-					default:
-						gc->pads[GC_PSX] &= ~gc_status_bit[i];
-						printk(KERN_WARNING "gamecon.c: Unsupported PSX controller %#x,"
-							" please report to <vojtech@ucw.cz>.\n", psx);
+			case GC_DDR:
+				if(config[i + 1] == GC_DDR) {
+					for (j = 0; j < 4; j++)
+						set_bit(gc_psx_ddr_btn[j], gc->dev[i].keybit);
+				} else {
+					for (j = 0; j < 6; j++) {
+						set_bit(gc_psx_abs[j], gc->dev[i].absbit);
+						gc->dev[i].absmin[gc_psx_abs[j]] = 4;
+						gc->dev[i].absmax[gc_psx_abs[j]] = 252;
+						gc->dev[i].absflat[gc_psx_abs[j]] = 2;
+					}
 				}
+
+				for (j = 0; j < 12; j++)
+					set_bit(gc_psx_btn[j], gc->dev[i].keybit);
+
 				break;
 		}