Commit fd046eb5 authored by Alexander Bigga's avatar Alexander Bigga Committed by Ralf Baechle

[MIPS] Alchemy: Fix PCI-memory access

The problem was introduced in 2.6.18.3 with the casting of some
36bit-defines (PCI memory) in au1000.h to resource_size_t which may be
u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT.

With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed
because the ioremap in arch/mips/au1000/common/pci.c already used the
truncated addresses.
With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan
aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c
fails because the maximum iomem-address is 0xffffffff (32bit) but the
pci-memory-start-address is 0x440000000 (36bit).

To get pci working again, I propose the following patch:

1. remove the resource_size_t-casting from au1000.h again
2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and
necessary here. The 36bit-handling will be done in __fixup_bigphys_addr).

With this patch pci works again like in 2.6.18.2, the gcc-compile warnings
in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL.
Signed-off-by: default avatarAlexander Bigga <ab@mycable.de>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 37f26742
...@@ -1665,12 +1665,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; ...@@ -1665,12 +1665,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
* addresses. For PCI IO, it's simpler because we get to do the ioremap * addresses. For PCI IO, it's simpler because we get to do the ioremap
* ourselves and then adjust the device's resources. * ourselves and then adjust the device's resources.
*/ */
#define Au1500_EXT_CFG ((resource_size_t) 0x600000000ULL) #define Au1500_EXT_CFG 0x600000000ULL
#define Au1500_EXT_CFG_TYPE1 ((resource_size_t) 0x680000000ULL) #define Au1500_EXT_CFG_TYPE1 0x680000000ULL
#define Au1500_PCI_IO_START ((resource_size_t) 0x500000000ULL) #define Au1500_PCI_IO_START 0x500000000ULL
#define Au1500_PCI_IO_END ((resource_size_t) 0x5000FFFFFULL) #define Au1500_PCI_IO_END 0x5000FFFFFULL
#define Au1500_PCI_MEM_START ((resource_size_t) 0x440000000ULL) #define Au1500_PCI_MEM_START 0x440000000ULL
#define Au1500_PCI_MEM_END ((resource_size_t) 0x44FFFFFFFULL) #define Au1500_PCI_MEM_END 0x44FFFFFFFULL
#define PCI_IO_START (Au1500_PCI_IO_START + 0x1000) #define PCI_IO_START (Au1500_PCI_IO_START + 0x1000)
#define PCI_IO_END (Au1500_PCI_IO_END) #define PCI_IO_END (Au1500_PCI_IO_END)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment