Commit fd18f00d authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'blackfin-for-linus' of...

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao:
 "Code cleanup, some previously ignored patches, and bug fixes"

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  blackfin: cleanup board files
  bf609: clock: drop unused clock bit set/clear functions
  Blackfin: bf537: rename "CONFIG_ADT75"
  Blackfin: bf537: rename "CONFIG_AD7314"
  Blackfin: bf537: rename ad2s120x ->ad2s1200
  blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE"
  blackfin: dma: current count mmr is read only
  bfin_crc: Move architecture independant crc header file out of the blackfin folder.
  bf54x: drop unuesd HOST status,control,timeout registers bit define macros
  blackfin: portmux: cleanup head file
  Blackfin: remove "config IP_CHECKSUM_L1"
  blackfin: Remove GENERIC_GPIO config option again
  blackfin:Use generic /proc/interrupts implementation
  blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
parents de0c9cf9 c4a2c58d
......@@ -34,6 +34,7 @@ config BLACKFIN
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
......@@ -51,9 +52,6 @@ config GENERIC_BUG
config ZONE_DMA
def_bool y
config GENERIC_GPIO
def_bool y
config FORCE_MAX_ZONEORDER
int
default "14"
......@@ -870,14 +868,6 @@ config SYS_BFIN_SPINLOCK_L1
If enabled, sys_bfin_spinlock function is linked
into L1 instruction memory. (less latency)
config IP_CHECKSUM_L1
bool "Locate IP Checksum function in L1 Memory"
default n
depends on !SMP
help
If enabled, the IP Checksum function is linked
into L1 instruction memory. (less latency)
config CACHELINE_ALIGNED_L1
bool "Locate cacheline_aligned data to L1 Data Memory"
default y if !BF54x
......
/*
* bfin_crc.h - interface to Blackfin CRC controllers
*
* Copyright 2012 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_CRC_H__
#define __BFIN_CRC_H__
/* Function driver which use hardware crc must initialize the structure */
struct crc_info {
/* Input data address */
unsigned char *in_addr;
/* Output data address */
unsigned char *out_addr;
/* Input or output bytes */
unsigned long datasize;
union {
/* CRC to compare with that of input buffer */
unsigned long crc_compare;
/* Value to compare with input data */
unsigned long val_verify;
/* Value to fill */
unsigned long val_fill;
};
/* Value to program the 32b CRC Polynomial */
unsigned long crc_poly;
union {
/* CRC calculated from the input data */
unsigned long crc_result;
/* First failed position to verify input data */
unsigned long pos_verify;
};
/* CRC mirror flags */
unsigned int bitmirr:1;
unsigned int bytmirr:1;
unsigned int w16swp:1;
unsigned int fdsel:1;
unsigned int rsltmirr:1;
unsigned int polymirr:1;
unsigned int cmpmirr:1;
};
/* Userspace interface */
#define CRC_IOC_MAGIC 'C'
#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int)
#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int)
#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int)
#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int)
#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/miscdevice.h>
struct crc_register {
u32 control;
u32 datacnt;
u32 datacntrld;
u32 __pad_1[2];
u32 compare;
u32 fillval;
u32 datafifo;
u32 intren;
u32 intrenset;
u32 intrenclr;
u32 poly;
u32 __pad_2[4];
u32 status;
u32 datacntcap;
u32 __pad_3;
u32 result;
u32 curresult;
u32 __pad_4[3];
u32 revid;
};
/* CRC_STATUS Masks */
#define CMPERR 0x00000002 /* Compare error */
#define DCNTEXP 0x00000010 /* datacnt register expired */
#define IBR 0x00010000 /* Input buffer ready */
#define OBR 0x00020000 /* Output buffer ready */
#define IRR 0x00040000 /* Immediate result readt */
#define LUTDONE 0x00080000 /* Look-up table generation done */
#define FSTAT 0x00700000 /* FIFO status */
#define MAX_FIFO 4 /* Max fifo size */
/* CRC_CONTROL Masks */
#define BLKEN 0x00000001 /* Block enable */
#define OPMODE 0x000000F0 /* Operation mode */
#define OPMODE_OFFSET 4 /* Operation mode mask offset*/
#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */
#define MODE_DATA_FILL 2 /* MTM data fill */
#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */
#define MODE_DATA_VERIFY 4 /* MSM data verify */
#define AUTOCLRZ 0x00000100 /* Auto clear to zero */
#define AUTOCLRF 0x00000200 /* Auto clear to one */
#define OBRSTALL 0x00001000 /* Stall on output buffer ready */
#define IRRSTALL 0x00002000 /* Stall on immediate result ready */
#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */
#define BITMIRR_OFFSET 16 /* Mirror bits offset */
#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */
#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */
#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */
#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */
#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */
#define FDSEL_OFFSET 19 /* Mirror FIFO offset */
#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */
#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */
#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */
#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */
#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */
#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */
/* CRC_INTREN Masks */
#define CMPERRI 0x02 /* CRC_ERROR_INTR */
#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */
#endif
#endif
......@@ -316,8 +316,6 @@ static inline void disable_dma(unsigned int channel)
}
static inline void enable_dma(unsigned int channel)
{
dma_ch[channel].regs->curr_x_count = 0;
dma_ch[channel].regs->curr_y_count = 0;
dma_ch[channel].regs->cfg |= DMAEN;
}
int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);
......
......@@ -18,16 +18,14 @@
#define P_DONTCARE 0x1000
#ifdef CONFIG_PINCTRL
#include <asm/irq_handler.h>
int bfin_internal_set_wake(unsigned int irq, unsigned int state);
#define gpio_pint_regs bfin_pint_regs
#define adi_internal_set_wake bfin_internal_set_wake
#define peripheral_request(per, label) 0
#define peripheral_request(per, label) (0)
#define peripheral_free(per)
#define peripheral_request_list(per, label) \
(pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \
? -EINVAL : 0) : 0)
#define peripheral_request_list(per, label) (0)
#define peripheral_free_list(per)
#else
int peripheral_request(unsigned short per, const char *label);
......@@ -39,7 +37,7 @@ void peripheral_free_list(const unsigned short per[]);
#include <linux/err.h>
#include <linux/pinctrl/pinctrl.h>
#include <mach/portmux.h>
#include <linux/gpio.h>
#include <mach/gpio.h>
#ifndef P_SPORT2_TFS
#define P_SPORT2_TFS P_UNDEF
......
......@@ -11,6 +11,7 @@
#include <linux/kallsyms.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <asm/irq_handler.h>
#include <asm/trace.h>
#include <asm/pda.h>
......@@ -33,37 +34,15 @@ static struct irq_desc bad_irq_desc = {
#endif
#ifdef CONFIG_PROC_FS
int show_interrupts(struct seq_file *p, void *v)
int arch_show_interrupts(struct seq_file *p, int prec)
{
int i = *(loff_t *) v, j;
struct irqaction *action;
unsigned long flags;
if (i < NR_IRQS) {
struct irq_desc *desc = irq_to_desc(i);
raw_spin_lock_irqsave(&desc->lock, flags);
action = desc->action;
if (!action)
goto skip;
seq_printf(p, "%3d: ", i);
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
seq_printf(p, " %8s", irq_desc_get_chip(desc)->name);
seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next)
seq_printf(p, " %s", action->name);
seq_putc(p, '\n');
skip:
raw_spin_unlock_irqrestore(&desc->lock, flags);
} else if (i == NR_IRQS) {
seq_printf(p, "NMI: ");
int j;
seq_printf(p, "%*s: ", prec, "NMI");
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
seq_printf(p, " CORE Non Maskable Interrupt\n");
seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
}
seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
return 0;
}
#endif
......
......@@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF518F-EZBRD";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezbrd_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -61,7 +61,7 @@ static struct physmap_flash_data ezbrd_flash_data = {
static struct resource ezbrd_flash_resource = {
.start = 0x20000000,
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
.end = 0x202fffff,
#else
.end = 0x203fffff,
......@@ -80,14 +80,14 @@ static struct platform_device ezbrd_flash_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = {
P_MII0_ETxD0,
......@@ -105,7 +105,7 @@ static const unsigned short bfin_mac_peripherals[] = {
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
{
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
.addr = 3,
#else
.addr = 1,
......@@ -119,7 +119,7 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
.phydev_data = bfin_phydev_data,
.phy_mode = PHY_INTERFACE_MODE_MII,
.mac_peripherals = bfin_mac_peripherals,
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
.phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
#endif
.vlan1_mask = 1,
......@@ -140,7 +140,7 @@ static struct platform_device bfin_mac_device = {
}
};
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
static struct dsa_chip_data ksz8893m_switch_chip_data = {
.mii_bus = &bfin_mii_bus.dev,
.port_names = {
......@@ -165,8 +165,7 @@ static struct platform_device ksz8893m_switch_device = {
#endif
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -193,13 +192,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -216,8 +215,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -230,9 +228,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
{
.modalias = "ksz8893m",
.max_speed_hz = 5000000,
......@@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
......@@ -254,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -264,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 2,
},
#endif
#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
......@@ -274,7 +271,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -282,7 +279,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 1,
},
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -294,7 +291,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
};
/* SPI controller data */
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 6,
......@@ -366,7 +363,7 @@ static struct platform_device bfin_spi1_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -465,7 +462,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -520,7 +517,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -528,7 +525,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -556,25 +553,25 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
},
#endif
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -645,7 +642,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -667,7 +664,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_RSI,
......@@ -710,24 +707,24 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
&ksz8893m_switch_device,
#endif
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
&bfin_spi1_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -736,7 +733,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -745,15 +742,15 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -762,15 +759,15 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf51x_sdh_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezbrd_flash_device,
#endif
};
......@@ -784,7 +781,7 @@ static int __init ezbrd_init(void)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
peripheral_request(P_AMS2, "ParaFlash");
#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE)
#if !IS_ENABLED(CONFIG_SPI_BFIN5XX)
peripheral_request(P_AMS3, "ParaFlash");
#endif
return 0;
......
......@@ -36,7 +36,7 @@ const char bfin_board_name[] = "Bluetechnix TCM-BF518";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition tcm_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -73,14 +73,14 @@ static struct platform_device tcm_flash_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
......@@ -113,8 +113,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -141,13 +140,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -164,8 +163,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -178,7 +176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -188,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -198,7 +196,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 2,
},
#endif
#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
......@@ -208,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -216,7 +214,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 1,
},
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -228,7 +226,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
};
/* SPI controller data */
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 6,
......@@ -300,7 +298,7 @@ static struct platform_device bfin_spi1_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -399,7 +397,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -454,7 +452,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -482,12 +480,12 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
......@@ -495,7 +493,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -566,7 +564,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -588,7 +586,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_RSI,
......@@ -631,21 +629,21 @@ static struct platform_device *tcm_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
&bfin_spi1_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -654,7 +652,7 @@ static struct platform_device *tcm_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -663,11 +661,11 @@ static struct platform_device *tcm_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -676,15 +674,15 @@ static struct platform_device *tcm_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf51x_sdh_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&tcm_flash_device,
#endif
};
......
......@@ -37,7 +37,7 @@ const char bfin_board_name[] = "ADI BF527-AD7160EVAL";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
......@@ -97,7 +97,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
static struct resource bf52x_ra158z_resources[] = {
{
.start = IRQ_PPI_ERROR,
......@@ -114,7 +114,7 @@ static struct platform_device bf52x_ra158z_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ad7160eval_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -154,7 +154,7 @@ static struct platform_device ad7160eval_flash_device = {
};
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
......@@ -200,14 +200,14 @@ static struct platform_device bf5xx_nand_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
......@@ -241,8 +241,7 @@ static struct platform_device bfin_mac_device = {
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -269,13 +268,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -284,8 +283,7 @@ static struct platform_device bfin_i2s = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -297,8 +295,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -306,7 +303,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 4,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 30000000, /* max spi clock (SCK) speed in HZ */
......@@ -316,7 +313,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -326,7 +323,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
......@@ -364,7 +361,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -475,7 +472,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -530,7 +527,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
#include <linux/input/ad7160.h>
static const struct ad7160_platform_data bfin_ad7160_ts_info = {
.sensor_x_res = 854,
......@@ -560,7 +557,7 @@ static const struct ad7160_platform_data bfin_ad7160_ts_info = {
};
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -588,7 +585,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
{
I2C_BOARD_INFO("ad7160", 0x33),
.irq = IRQ_PH1,
......@@ -597,7 +594,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -668,7 +665,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
......@@ -725,28 +722,28 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -755,11 +752,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
&bf52x_ra158z_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -768,11 +765,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -781,15 +778,15 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ad7160eval_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
};
......
......@@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF527";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
......@@ -72,7 +72,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
......@@ -134,7 +134,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
......@@ -180,7 +180,7 @@ static struct platform_device bf5xx_nand_device = {
};
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
......@@ -209,14 +209,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -249,7 +249,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
......@@ -276,7 +276,7 @@ static struct platform_device dm9000_device = {
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
......@@ -309,7 +309,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -330,8 +330,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -358,13 +357,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -381,8 +380,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -395,8 +393,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -404,7 +401,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 4,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -414,7 +411,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -424,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 2,
},
#endif
#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
......@@ -434,7 +431,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -444,7 +441,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
......@@ -482,7 +479,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -531,7 +528,7 @@ static struct platform_device cm_flash_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -642,7 +639,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -697,7 +694,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -725,25 +722,25 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
},
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -814,7 +811,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -861,48 +858,48 @@ static struct platform_device *cmbf527_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -911,7 +908,7 @@ static struct platform_device *cmbf527_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -920,11 +917,11 @@ static struct platform_device *cmbf527_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -933,11 +930,11 @@ static struct platform_device *cmbf527_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
......
......@@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF526-EZBRD";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
......@@ -98,7 +98,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezbrd_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -138,7 +138,7 @@ static struct platform_device ezbrd_flash_device = {
};
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
......@@ -188,7 +188,7 @@ static struct platform_device bf5xx_nand_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
......@@ -196,7 +196,7 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
......@@ -229,8 +229,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -257,13 +256,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -279,7 +278,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
......@@ -297,8 +296,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -311,7 +309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
......@@ -321,7 +319,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -331,7 +329,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 2,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
......@@ -342,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
......@@ -352,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -360,7 +358,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 1,
},
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -371,7 +369,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
......@@ -409,7 +407,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -520,7 +518,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -575,7 +573,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -603,12 +601,12 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
......@@ -616,7 +614,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -687,7 +685,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -731,7 +729,7 @@ static struct platform_device bfin_dpmc = {
},
};
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
......@@ -764,28 +762,28 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -794,11 +792,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -807,11 +805,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -820,11 +818,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezbrd_flash_device,
#endif
};
......
......@@ -42,7 +42,7 @@ const char bfin_board_name[] = "ADI BF527-EZKIT";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
......@@ -77,7 +77,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
......@@ -139,7 +139,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
static struct resource bf52x_t350mcqb_resources[] = {
{
......@@ -157,7 +157,7 @@ static struct platform_device bf52x_t350mcqb_device = {
};
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
......@@ -184,7 +184,7 @@ static struct platform_device bfin_lq035q1_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -224,7 +224,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
......@@ -274,7 +274,7 @@ static struct platform_device bf5xx_nand_device = {
};
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
......@@ -303,14 +303,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -343,7 +343,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
......@@ -370,7 +370,7 @@ static struct platform_device dm9000_device = {
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
......@@ -403,7 +403,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -427,8 +427,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -455,13 +454,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -477,7 +476,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
......@@ -493,7 +492,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static const u16 bfin_snd_pin[][7] = {
{P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
......@@ -541,21 +540,21 @@ static struct resource bfin_snd_resources[][4] = {
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -567,8 +566,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
......@@ -583,8 +581,7 @@ static struct platform_device bfin_ad1836_machine = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -597,8 +594,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -608,7 +604,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -619,7 +615,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -629,7 +625,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 2,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
......@@ -640,7 +636,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -648,7 +644,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 1,
},
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -659,7 +655,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
......@@ -697,7 +693,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -808,7 +804,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -863,7 +859,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -890,7 +886,7 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
#if IS_ENABLED(CONFIG_PMIC_ADP5520)
#include <linux/mfd/adp5520.h>
/*
......@@ -956,54 +952,54 @@ static struct adp5520_platform_data adp5520_pdev_data = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
},
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
{
I2C_BOARD_INFO("ad7879", 0x2C),
.irq = IRQ_PF8,
.platform_data = (void *)&bfin_ad7879_ts_info,
},
#endif
#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
#if IS_ENABLED(CONFIG_PMIC_ADP5520)
{
I2C_BOARD_INFO("pmic-adp5520", 0x32),
.irq = IRQ_PF9,
.platform_data = (void *)&adp5520_pdev_data,
},
#endif
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2f),
},
#endif
#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
{
I2C_BOARD_INFO("adau1373", 0x1A),
},
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -1074,7 +1070,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
......@@ -1095,7 +1091,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
......@@ -1153,56 +1149,56 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
&bf52x_t350mcqb_device,
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -1211,7 +1207,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -1220,11 +1216,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -1233,32 +1229,31 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
};
......
......@@ -28,8 +28,7 @@
#include <asm/portmux.h>
#include <asm/dpmc.h>
#if defined(CONFIG_TOUCHSCREEN_AD7879) \
|| defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
#define LCD_BACKLIGHT_GPIO 0x40
/* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
......@@ -45,7 +44,7 @@ const char bfin_board_name[] = "TLL6527M";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
......@@ -104,7 +103,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
......@@ -133,7 +132,7 @@ static struct platform_device bfin_lq035q1_device = {
};
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition tll6527m_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -182,7 +181,7 @@ static struct platform_device tll6527m_flash_device = {
};
#endif
#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
#if IS_ENABLED(CONFIG_GPIO_DECODER)
/* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented
* outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0.
* EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being
......@@ -215,7 +214,7 @@ static struct platform_device spi_decoded_gpio = {
#endif
#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl345_info = {
.x_axis_offset = 0,
......@@ -250,14 +249,14 @@ static const struct adxl34x_platform_data adxl345_info = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
......@@ -290,8 +289,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -318,14 +316,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879) \
|| defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
.x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
......@@ -343,7 +340,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -351,7 +348,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
#include <linux/spi/mcp23s08.h>
static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
.chip[0].is_present = true,
......@@ -364,8 +361,7 @@ static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -381,7 +377,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
/*
......@@ -396,8 +392,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \
|| defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
......@@ -409,7 +404,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 10000000,
......@@ -419,7 +414,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000,
......@@ -428,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
{
.modalias = "mcp23s08",
.platform_data = &bfin_mcp23s08_sys_gpio_info,
......@@ -448,7 +443,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
......@@ -487,7 +482,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -600,7 +595,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -655,7 +650,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -683,26 +678,25 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) \
|| defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
{
I2C_BOARD_INFO("ad7879", 0x2C),
.irq = IRQ_PH14,
.platform_data = (void *)&bfin_ad7879_ts_info,
},
#endif
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
......@@ -714,8 +708,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
{
I2C_BOARD_INFO("ltc3576", 0x09),
},
#if defined(CONFIG_INPUT_ADXL34X_I2C) \
|| defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PH13,
......@@ -724,8 +717,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) \
|| defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -823,28 +815,28 @@ static struct platform_device *tll6527m_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -853,7 +845,7 @@ static struct platform_device *tll6527m_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -862,12 +854,11 @@ static struct platform_device *tll6527m_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) \
|| defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -876,15 +867,15 @@ static struct platform_device *tll6527m_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&tll6527m_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
#if IS_ENABLED(CONFIG_GPIO_DECODER)
&spi_decoded_gpio,
#endif
};
......
......@@ -14,7 +14,7 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
......@@ -29,7 +29,7 @@
*/
const char bfin_board_name[] = "HV Sistemas H8606";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
......@@ -39,7 +39,7 @@ static struct platform_device rtc_device = {
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x20300000,
......@@ -67,7 +67,7 @@ static struct platform_device dm9000_device = {
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -104,7 +104,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -125,10 +125,10 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader (spi)",
......@@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -180,7 +180,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 16,
......@@ -229,7 +229,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -280,7 +280,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -309,7 +309,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_8250)
#include <linux/serial_8250.h>
#include <linux/serial.h>
......@@ -353,7 +353,7 @@ static struct platform_device serial8250_device = {
#endif
#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
/*
* Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
......@@ -382,43 +382,43 @@ static struct platform_device opencores_kbd_device = {
#endif
static struct platform_device *h8606_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_8250)
&serial8250_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
&opencores_kbd_device,
#endif
};
......@@ -428,7 +428,7 @@ static int __init H8606_init(void)
printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
......
......@@ -31,7 +31,7 @@
*/
const char bfin_board_name[] = "BlackStamp";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
......@@ -41,7 +41,7 @@ static struct platform_device rtc_device = {
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -74,7 +74,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -105,14 +105,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -125,7 +125,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -136,7 +136,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -146,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
......@@ -184,7 +184,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -235,7 +235,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -264,7 +264,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -335,7 +335,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -358,7 +358,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
......@@ -413,32 +413,32 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -447,11 +447,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
};
......@@ -469,7 +469,7 @@ static int __init blackstamp_init(void)
if (ret < 0)
return ret;
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
/*
* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
* the bfin-async-map driver takes care of flipping between
......
......@@ -15,7 +15,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
......@@ -29,9 +29,9 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF533";
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -62,14 +62,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -82,7 +82,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -91,7 +91,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -140,14 +140,14 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -178,7 +178,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
......@@ -212,7 +212,7 @@ static struct platform_device smsc911x_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -263,7 +263,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -292,7 +292,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -363,7 +363,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
......@@ -403,7 +403,7 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -426,7 +426,7 @@ static struct platform_device net2272_bfin_device = {
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -495,19 +495,19 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -516,31 +516,31 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&para_flash_device,
#endif
};
......@@ -549,7 +549,7 @@ static int __init cm_bf533_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
......
......@@ -14,7 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
......@@ -29,7 +29,7 @@
*/
const char bfin_board_name[] = "ADI BF533-EZKIT";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
......@@ -40,7 +40,7 @@ static struct platform_device rtc_device = {
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -72,7 +72,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions_a[] = {
{
.name = "bootloader(nor a)",
......@@ -138,7 +138,7 @@ static struct platform_device ezkit_flash_device_b = {
};
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
#if IS_ENABLED(CONFIG_MTD_PLATRAM)
static struct platdata_mtd_ram sram_data_a = {
.mapname = "Flash A SRAM",
.bankwidth = 2,
......@@ -182,7 +182,7 @@ static struct platform_device sram_device_b = {
};
#endif
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -214,7 +214,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -235,7 +235,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 4,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -245,7 +245,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
......@@ -283,7 +283,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -334,7 +334,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -363,7 +363,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -387,7 +387,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
......@@ -435,14 +435,14 @@ static struct platform_device bfin_dpmc = {
};
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
};
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -450,7 +450,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -462,53 +462,53 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device_a,
&ezkit_flash_device_b,
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
#if IS_ENABLED(CONFIG_MTD_PLATRAM)
&sram_device_a,
&sram_device_b,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
};
......
......@@ -15,7 +15,7 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <asm/irq.h>
......@@ -32,7 +32,7 @@ const char bfin_board_name[] = "IP04/IP08";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_BFIN532_IP0X)
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
#include <linux/dm9000.h>
......@@ -104,10 +104,10 @@ static struct platform_device dm9000_device2 = {
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, /* if 1 - block!!! */
};
......@@ -116,7 +116,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 2,
......@@ -142,7 +142,7 @@ static struct platform_device spi_bfin_master_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -193,7 +193,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -222,7 +222,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20300000,
......@@ -264,29 +264,29 @@ static struct platform_device isp1362_hcd_device = {
static struct platform_device *ip0x_devices[] __initdata = {
#if defined(CONFIG_BFIN532_IP0X)
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device1,
&dm9000_device2,
#endif
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&spi_bfin_master_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
};
......
......@@ -14,7 +14,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
......@@ -30,7 +30,7 @@
*/
const char bfin_board_name[] = "ADI BF533-STAMP";
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
......@@ -40,7 +40,7 @@ static struct platform_device rtc_device = {
/*
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -73,7 +73,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -97,7 +97,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
static struct mtd_partition stamp_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -147,7 +147,7 @@ static struct platform_device stamp_flash_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -178,7 +178,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
static int bfin_mmc_spi_init(struct device *dev,
irqreturn_t (*detect_int)(int, void *), void *data)
......@@ -206,7 +206,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -219,8 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -231,7 +230,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -239,7 +238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 1,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -252,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
......@@ -290,7 +289,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -341,7 +340,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -370,8 +369,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -442,7 +440,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SPORT)
static struct resource bfin_sport0_resources[] = {
{
.start = SPORT0_TCR1,
......@@ -486,7 +484,7 @@ static struct platform_device bfin_sport0_device = {
};
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -509,7 +507,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
......@@ -530,29 +528,29 @@ static struct platform_device i2c_gpio_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
#if IS_ENABLED(CONFIG_JOYSTICK_AD7142)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
.irq = 39,
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = 39,
},
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2f),
},
......@@ -586,9 +584,8 @@ static struct platform_device bfin_dpmc = {
},
};
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
defined(CONFIG_SND_BF5XX_AC97) || \
defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
IS_ENABLED(CONFIG_SND_BF5XX_AC97)
#include <asm/bfin_sport.h>
......@@ -640,22 +637,21 @@ static struct resource bfin_snd_resources[][4] = {
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
......@@ -669,8 +665,7 @@ static struct platform_device bfin_ad1836_machine = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
static const unsigned ad73311_gpio[] = {
GPIO_PF4,
};
......@@ -684,22 +679,21 @@ static struct platform_device bfin_ad73311_machine = {
};
#endif
#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
static struct platform_device bfin_ad73311_codec_device = {
.name = "ad73311",
.id = -1,
};
#endif
#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
static struct platform_device bfin_ad74111_codec_device = {
.name = "ad74111",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -712,8 +706,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -730,36 +723,35 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -768,58 +760,54 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
&stamp_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
&bfin_ad73311_machine,
#endif
#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
&bfin_ad73311_codec_device,
#endif
#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
&bfin_ad74111_codec_device,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
&bfin_ac97,
#endif
};
static int __init net2272_init(void)
{
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
/* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */
......@@ -865,7 +853,7 @@ static int __init stamp_init(void)
if (ret < 0)
return ret;
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
/*
* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
* the bfin-async-map driver takes care of flipping between
......
......@@ -16,7 +16,7 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
......@@ -32,10 +32,10 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF537E";
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -144,7 +144,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
......@@ -209,20 +209,20 @@ static struct platform_device bfin_sport_spi1_device = {
#endif /* sport spi master and devices */
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -254,7 +254,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
......@@ -293,7 +293,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -314,7 +314,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -363,7 +363,7 @@ static struct platform_device cm_flash_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -498,7 +498,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -551,7 +551,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -578,14 +578,14 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
|| IS_ENABLED(CONFIG_BFIN_SPORT)
unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -650,7 +650,7 @@ static struct platform_device bfin_sport1_uart_device = {
};
#endif
#endif
#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SPORT)
static struct resource bfin_sport0_resources[] = {
{
.start = SPORT0_TCR1,
......@@ -694,7 +694,7 @@ static struct platform_device bfin_sport0_device = {
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
......@@ -727,7 +727,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
......@@ -795,19 +795,19 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SPORT)
&bfin_sport0_device,
#endif
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -816,7 +816,7 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -825,11 +825,11 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -838,44 +838,44 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
&bfin_sport_spi0_device,
&bfin_sport_spi1_device,
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
static int __init net2272_init(void)
{
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PG14, "net2272");
......@@ -895,11 +895,11 @@ static int __init cm_bf537e_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
......
......@@ -16,7 +16,7 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
......@@ -32,10 +32,10 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF537U";
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -144,20 +144,20 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -189,7 +189,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
......@@ -228,7 +228,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20200000,
......@@ -249,7 +249,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -298,7 +298,7 @@ static struct platform_device cm_flash_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -397,7 +397,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -450,7 +450,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -477,7 +477,7 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -548,7 +548,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
......@@ -581,7 +581,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
......@@ -649,15 +649,15 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -666,7 +666,7 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -675,11 +675,11 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -688,39 +688,39 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
static int __init net2272_init(void)
{
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PH15, driver_name);
......@@ -752,11 +752,11 @@ static int __init cm_bf537u_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
......
......@@ -41,14 +41,14 @@ const char bfin_board_name[] = "DNP/5370";
#define FLASH_MAC 0x202f0000
#define CONFIG_MTD_PHYSMAP_LEN 0x300000
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
......@@ -81,7 +81,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition asmb_flash_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -125,9 +125,9 @@ static struct platform_device asmb_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, /* use no dma transfer with this chip*/
......@@ -135,7 +135,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
#endif
#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
/* This mapping is for at45db642 it has 1056 page size,
* partition size and offset should be page aligned
*/
......@@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_dataflash_chip_info = {
static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* SD/MMC card reader at SPI bus */
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000,
......@@ -178,7 +178,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
/* 8 Megabyte Atmel NOR flash chip at SPI bus */
#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{
.modalias = "mtd_dataflash",
.max_speed_hz = 16700000,
......@@ -228,7 +228,7 @@ static struct platform_device spi_bfin_master_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -328,7 +328,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -357,7 +357,7 @@ static struct platform_device i2c_bfin_twi_device = {
static struct platform_device *dnp5370_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -366,24 +366,24 @@ static struct platform_device *dnp5370_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&asmb_flash_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&spi_bfin_master_device,
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
......
......@@ -13,7 +13,7 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
......@@ -31,7 +31,7 @@
*/
const char bfin_board_name[] = "CamSig Minotaur BF537";
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
......@@ -60,14 +60,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
......@@ -100,7 +100,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -121,11 +121,10 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
/* Partition sizes */
#define FLASH_SIZE 0x00400000
......@@ -162,15 +161,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -183,7 +181,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
......@@ -231,7 +229,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -330,7 +328,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -385,7 +383,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -412,7 +410,7 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -484,28 +482,28 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
static struct platform_device *minotaur_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -514,7 +512,7 @@ static struct platform_device *minotaur_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -523,11 +521,11 @@ static struct platform_device *minotaur_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -542,7 +540,7 @@ static int __init minotaur_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
......
......@@ -30,7 +30,7 @@ const char bfin_board_name[] = "ADI PNAV-1.0";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
......@@ -59,14 +59,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -99,7 +99,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
......@@ -132,7 +132,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -153,11 +153,10 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -188,13 +187,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -211,8 +210,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -225,8 +223,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -234,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 4,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
......@@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -294,13 +291,13 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
static struct platform_device bfin_fb_device = {
.name = "bf537-lq035",
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -399,7 +396,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -455,36 +452,36 @@ static struct platform_device bfin_sir1_device = {
#endif
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
&bfin_fb_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -493,7 +490,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -507,7 +504,7 @@ static int __init pnav_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
......
......@@ -18,7 +18,7 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/i2c.h>
......@@ -53,7 +53,7 @@ const char bfin_board_name[] = "ADI BF537-STAMP";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
......@@ -88,7 +88,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
......@@ -111,7 +111,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
......@@ -140,14 +140,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -180,7 +180,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
......@@ -207,7 +207,7 @@ static struct platform_device dm9000_device = {
};
#endif
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_SL811_HCD)
static struct resource sl811_hcd_resources[] = {
{
.start = 0x20340000,
......@@ -251,7 +251,7 @@ static struct platform_device sl811_hcd_device = {
};
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20360000,
......@@ -290,7 +290,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
};
......@@ -328,7 +328,7 @@ static struct platform_device bfin_can_device = {
};
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
......@@ -361,7 +361,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -385,7 +385,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
static struct mtd_partition bfin_plat_nand_partitions[] = {
......@@ -461,7 +461,7 @@ static void bfin_plat_nand_init(void)
static void bfin_plat_nand_init(void) {}
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition stamp_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -509,8 +509,7 @@ static struct platform_device stamp_flash_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -541,7 +540,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
#include <linux/input/ad714x.h>
static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
......@@ -602,7 +601,7 @@ static struct ad714x_platform_data ad7147_spi_platform_data = {
};
#endif
#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
#include <linux/input/ad714x.h>
static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
{
......@@ -649,24 +648,24 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = {
};
#endif
#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
#if IS_ENABLED(CONFIG_AD2S90)
static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
static unsigned short ad2s120x_platform_data[] = {
#if IS_ENABLED(CONFIG_AD2S1200)
static unsigned short ad2s1200_platform_data[] = {
/* used as SAMPLE and RDVEL */
GPIO_PF5, GPIO_PF6, 0
};
static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
#if IS_ENABLED(CONFIG_AD2S1210)
static unsigned short ad2s1210_platform_data[] = {
/* use as SAMPLE, A0, A1 */
GPIO_PF7, GPIO_PF8, GPIO_PF9,
......@@ -682,13 +681,13 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
};
#endif
#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
#if IS_ENABLED(CONFIG_SENSORS_AD7314)
static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
.enable_dma = 0,
};
#endif
#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
#if IS_ENABLED(CONFIG_AD7816)
static unsigned short ad7816_platform_data[] = {
GPIO_PF4, /* rdwr_pin */
GPIO_PF5, /* convert_pin */
......@@ -701,7 +700,7 @@ static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
};
#endif
#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
#if IS_ENABLED(CONFIG_ADT7310)
static unsigned long adt7310_platform_data[3] = {
/* INT bound temperature alarm event. line 1 */
IRQ_PG4, IRQF_TRIGGER_LOW,
......@@ -714,14 +713,14 @@ static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
};
#endif
#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
#if IS_ENABLED(CONFIG_AD7298)
static unsigned short ad7298_platform_data[] = {
GPIO_PF7, /* busy_pin */
0,
};
#endif
#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
#if IS_ENABLED(CONFIG_ADT7316_SPI)
static unsigned long adt7316_spi_data[2] = {
IRQF_TRIGGER_LOW, /* interrupt flags */
GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
......@@ -732,7 +731,7 @@ static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
static int bfin_mmc_spi_init(struct device *dev,
......@@ -759,7 +758,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
#include <linux/spi/ad7877.h>
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
......@@ -776,7 +775,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
......@@ -793,7 +792,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
};
#endif
#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
......@@ -832,13 +831,13 @@ static const struct adxl34x_platform_data adxl34x_info = {
};
#endif
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
#if IS_ENABLED(CONFIG_ENC28J60)
static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
.enable_dma = 1,
};
#endif
#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
#if IS_ENABLED(CONFIG_ADF702X)
#include <linux/spi/adf702x.h>
#define TXREG 0x0160A470
static const u32 adf7021_regs[] = {
......@@ -880,7 +879,7 @@ static inline void adf702x_mac_init(void)
static inline void adf702x_mac_init(void) {}
#endif
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
#include <linux/spi/ads7846.h>
static int ads7873_get_pendown_state(void)
{
......@@ -899,8 +898,7 @@ static struct ads7846_platform_data __initdata ad7873_pdata = {
};
#endif
#if defined(CONFIG_MTD_DATAFLASH) \
|| defined(CONFIG_MTD_DATAFLASH_MODULE)
#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
static struct mtd_partition bfin_spi_dataflash_partitions[] = {
{
......@@ -931,15 +929,14 @@ static struct bfin5xx_spi_chip data_flash_chip_info = {
};
#endif
#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
#if IS_ENABLED(CONFIG_AD7476)
static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -951,8 +948,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_MTD_DATAFLASH) \
|| defined(CONFIG_MTD_DATAFLASH_MODULE)
#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
......@@ -964,8 +960,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -986,7 +981,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
{
.modalias = "adav801",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -996,7 +991,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
{
.modalias = "ad714x_captouch",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1008,7 +1003,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
#if IS_ENABLED(CONFIG_AD2S90)
{
.modalias = "ad2s90",
.bus_num = 0,
......@@ -1019,17 +1014,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
#if IS_ENABLED(CONFIG_AD2S1200)
{
.modalias = "ad2s120x",
.modalias = "ad2s1200",
.bus_num = 0,
.chip_select = 4, /* CS, change it for your board */
.platform_data = ad2s120x_platform_data,
.controller_data = &ad2s120x_spi_chip_info,
.platform_data = ad2s1200_platform_data,
.controller_data = &ad2s1200_spi_chip_info,
},
#endif
#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
#if IS_ENABLED(CONFIG_AD2S1210)
{
.modalias = "ad2s1210",
.max_speed_hz = 8192000,
......@@ -1040,7 +1035,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
#if IS_ENABLED(CONFIG_SENSORS_AD7314)
{
.modalias = "ad7314",
.max_speed_hz = 1000000,
......@@ -1051,7 +1046,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
#if IS_ENABLED(CONFIG_AD7816)
{
.modalias = "ad7818",
.max_speed_hz = 1000000,
......@@ -1063,7 +1058,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
#if IS_ENABLED(CONFIG_ADT7310)
{
.modalias = "adt7310",
.max_speed_hz = 1000000,
......@@ -1076,7 +1071,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
#if IS_ENABLED(CONFIG_AD7298)
{
.modalias = "ad7298",
.max_speed_hz = 1000000,
......@@ -1087,7 +1082,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
#if IS_ENABLED(CONFIG_ADT7316_SPI)
{
.modalias = "adt7316",
.max_speed_hz = 1000000,
......@@ -1100,7 +1095,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -1111,7 +1106,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -1121,7 +1116,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 1,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
......@@ -1132,7 +1127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -1140,7 +1135,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 1,
},
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -1149,7 +1144,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
#if IS_ENABLED(CONFIG_ENC28J60)
{
.modalias = "enc28j60",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -1160,7 +1155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
{
.modalias = "adxl34x",
.platform_data = &adxl34x_info,
......@@ -1171,7 +1166,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
#if IS_ENABLED(CONFIG_ADF702X)
{
.modalias = "adf702x",
.max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
......@@ -1181,7 +1176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
{
.modalias = "ads7846",
.max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
......@@ -1192,8 +1187,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_0,
},
#endif
#if defined(CONFIG_AD7476) \
|| defined(CONFIG_AD7476_MODULE)
#if IS_ENABLED(CONFIG_AD7476)
{
.modalias = "ad7476", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
......@@ -1204,8 +1198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_ADE7753) \
|| defined(CONFIG_ADE7753_MODULE)
#if IS_ENABLED(CONFIG_ADE7753)
{
.modalias = "ade7753",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1215,8 +1208,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_1,
},
#endif
#if defined(CONFIG_ADE7754) \
|| defined(CONFIG_ADE7754_MODULE)
#if IS_ENABLED(CONFIG_ADE7754)
{
.modalias = "ade7754",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1226,8 +1218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_1,
},
#endif
#if defined(CONFIG_ADE7758) \
|| defined(CONFIG_ADE7758_MODULE)
#if IS_ENABLED(CONFIG_ADE7758)
{
.modalias = "ade7758",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1237,8 +1228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_1,
},
#endif
#if defined(CONFIG_ADE7759) \
|| defined(CONFIG_ADE7759_MODULE)
#if IS_ENABLED(CONFIG_ADE7759)
{
.modalias = "ade7759",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1248,8 +1238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_1,
},
#endif
#if defined(CONFIG_ADE7854_SPI) \
|| defined(CONFIG_ADE7854_SPI_MODULE)
#if IS_ENABLED(CONFIG_ADE7854_SPI)
{
.modalias = "ade7854",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1259,8 +1248,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_ADIS16060) \
|| defined(CONFIG_ADIS16060_MODULE)
#if IS_ENABLED(CONFIG_ADIS16060)
{
.modalias = "adis16060_r",
.max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
......@@ -1278,8 +1266,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_1,
},
#endif
#if defined(CONFIG_ADIS16130) \
|| defined(CONFIG_ADIS16130_MODULE)
#if IS_ENABLED(CONFIG_ADIS16130)
{
.modalias = "adis16130",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1289,8 +1276,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_ADIS16201) \
|| defined(CONFIG_ADIS16201_MODULE)
#if IS_ENABLED(CONFIG_ADIS16201)
{
.modalias = "adis16201",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1301,8 +1287,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16203) \
|| defined(CONFIG_ADIS16203_MODULE)
#if IS_ENABLED(CONFIG_ADIS16203)
{
.modalias = "adis16203",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1313,8 +1298,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16204) \
|| defined(CONFIG_ADIS16204_MODULE)
#if IS_ENABLED(CONFIG_ADIS16204)
{
.modalias = "adis16204",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1325,8 +1309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16209) \
|| defined(CONFIG_ADIS16209_MODULE)
#if IS_ENABLED(CONFIG_ADIS16209)
{
.modalias = "adis16209",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1337,8 +1320,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16220) \
|| defined(CONFIG_ADIS16220_MODULE)
#if IS_ENABLED(CONFIG_ADIS16220)
{
.modalias = "adis16220",
.max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
......@@ -1349,8 +1331,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16240) \
|| defined(CONFIG_ADIS16240_MODULE)
#if IS_ENABLED(CONFIG_ADIS16240)
{
.modalias = "adis16240",
.max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
......@@ -1361,8 +1342,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16260) \
|| defined(CONFIG_ADIS16260_MODULE)
#if IS_ENABLED(CONFIG_ADIS16260)
{
.modalias = "adis16260",
.max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
......@@ -1373,8 +1353,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16261) \
|| defined(CONFIG_ADIS16261_MODULE)
#if IS_ENABLED(CONFIG_ADIS16261)
{
.modalias = "adis16261",
.max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */
......@@ -1384,8 +1363,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_ADIS16300) \
|| defined(CONFIG_ADIS16300_MODULE)
#if IS_ENABLED(CONFIG_ADIS16300)
{
.modalias = "adis16300",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1396,8 +1374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16350) \
|| defined(CONFIG_ADIS16350_MODULE)
#if IS_ENABLED(CONFIG_ADIS16350)
{
.modalias = "adis16364",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1408,8 +1385,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PF4,
},
#endif
#if defined(CONFIG_ADIS16400) \
|| defined(CONFIG_ADIS16400_MODULE)
#if IS_ENABLED(CONFIG_ADIS16400)
{
.modalias = "adis16400",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
......@@ -1421,7 +1397,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
......@@ -1459,7 +1435,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
......@@ -1524,13 +1500,13 @@ static struct platform_device bfin_sport_spi1_device = {
#endif /* sport spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
static struct platform_device bfin_fb_device = {
.name = "bf537_lq035",
};
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
......@@ -1559,8 +1535,7 @@ static struct platform_device bfin_lq035q1_device = {
};
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
......@@ -1580,8 +1555,7 @@ static const struct ppi_info ppi_info = {
.pin_req = ppi_req,
};
#if defined(CONFIG_VIDEO_VS6624) \
|| defined(CONFIG_VIDEO_VS6624_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_VS6624)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
......@@ -1624,7 +1598,7 @@ static struct platform_device bfin_capture_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -1735,7 +1709,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -1790,7 +1764,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -1817,7 +1791,7 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
[0] = KEY_GRAVE,
[1] = KEY_1,
......@@ -1902,7 +1876,7 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
};
#endif
#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
#if IS_ENABLED(CONFIG_PMIC_ADP5520)
#include <linux/mfd/adp5520.h>
/*
......@@ -2013,14 +1987,14 @@ static struct adp5520_platform_data adp5520_pdev_data = {
#endif
#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
#if IS_ENABLED(CONFIG_GPIO_ADP5588)
static struct adp5588_gpio_platform_data adp5588_gpio_data = {
.gpio_start = 50,
.pullup_dis_mask = 0,
};
#endif
#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
#include <linux/i2c/adp8870.h>
static struct led_info adp8870_leds[] = {
{
......@@ -2072,7 +2046,7 @@ static struct adp8870_backlight_platform_data adp8870_pdata = {
};
#endif
#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
#include <linux/i2c/adp8860.h>
static struct led_info adp8860_leds[] = {
{
......@@ -2114,7 +2088,7 @@ static struct adp8860_backlight_platform_data adp8860_pdata = {
};
#endif
#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
static struct regulator_consumer_supply ad5398_consumer = {
.supply = "current",
};
......@@ -2129,8 +2103,7 @@ static struct regulator_init_data ad5398_regulator_data = {
.consumer_supplies = &ad5398_consumer,
};
#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
static struct platform_device ad5398_virt_consumer_device = {
.name = "reg-virt-consumer",
.id = 0,
......@@ -2139,8 +2112,7 @@ static struct platform_device ad5398_virt_consumer_device = {
},
};
#endif
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
static struct regulator_bulk_data ad5398_bulk_data = {
.supply = "current",
};
......@@ -2161,14 +2133,14 @@ static struct platform_device ad5398_userspace_consumer_device = {
#endif
#endif
#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
#if IS_ENABLED(CONFIG_ADT7410)
/* INT bound temperature alarm event. line 1 */
static unsigned long adt7410_platform_data[2] = {
IRQ_PG4, IRQF_TRIGGER_LOW,
};
#endif
#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
#if IS_ENABLED(CONFIG_ADT7316_I2C)
/* INT bound temperature alarm event. line 1 */
static unsigned long adt7316_i2c_data[2] = {
IRQF_TRIGGER_LOW, /* interrupt flags */
......@@ -2183,13 +2155,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
{
I2C_BOARD_INFO("adav803", 0x10),
},
#endif
#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
{
I2C_BOARD_INFO("ad7142_captouch", 0x2C),
.irq = IRQ_PG5,
......@@ -2197,39 +2169,39 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
#if IS_ENABLED(CONFIG_AD7150)
{
I2C_BOARD_INFO("ad7150", 0x48),
.irq = IRQ_PG5, /* fixme: use real interrupt number */
},
#endif
#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
#if IS_ENABLED(CONFIG_AD7152)
{
I2C_BOARD_INFO("ad7152", 0x48),
},
#endif
#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
#if IS_ENABLED(CONFIG_AD774X)
{
I2C_BOARD_INFO("ad774x", 0x48),
},
#endif
#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
#if IS_ENABLED(CONFIG_ADE7854_I2C)
{
I2C_BOARD_INFO("ade7854", 0x38),
},
#endif
#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
#if IS_ENABLED(CONFIG_SENSORS_LM75)
{
I2C_BOARD_INFO("adt75", 0x9),
.irq = IRQ_PG5,
},
#endif
#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
#if IS_ENABLED(CONFIG_ADT7410)
{
I2C_BOARD_INFO("adt7410", 0x48),
/* CT critical temperature event. line 0 */
......@@ -2238,14 +2210,14 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
#if IS_ENABLED(CONFIG_AD7291)
{
I2C_BOARD_INFO("ad7291", 0x20),
.irq = IRQ_PG5,
},
#endif
#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
#if IS_ENABLED(CONFIG_ADT7316_I2C)
{
I2C_BOARD_INFO("adt7316", 0x48),
.irq = IRQ_PG6,
......@@ -2253,128 +2225,128 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PG6,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
{
I2C_BOARD_INFO("ad7879", 0x2F),
.irq = IRQ_PG5,
.platform_data = (void *)&bfin_ad7879_ts_info,
},
#endif
#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
{
I2C_BOARD_INFO("adp5588-keys", 0x34),
.irq = IRQ_PG0,
.platform_data = (void *)&adp5588_kpad_data,
},
#endif
#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
#if IS_ENABLED(CONFIG_PMIC_ADP5520)
{
I2C_BOARD_INFO("pmic-adp5520", 0x32),
.irq = IRQ_PG0,
.platform_data = (void *)&adp5520_pdev_data,
},
#endif
#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PG3,
.platform_data = (void *)&adxl34x_info,
},
#endif
#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
#if IS_ENABLED(CONFIG_GPIO_ADP5588)
{
I2C_BOARD_INFO("adp5588-gpio", 0x34),
.platform_data = (void *)&adp5588_gpio_data,
},
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
{
I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
},
#endif
#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
{
I2C_BOARD_INFO("adp8870", 0x2B),
.platform_data = (void *)&adp8870_pdata,
},
#endif
#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371)
{
I2C_BOARD_INFO("adau1371", 0x1A),
},
#endif
#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
{
I2C_BOARD_INFO("adau1761", 0x38),
},
#endif
#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361)
{
I2C_BOARD_INFO("adau1361", 0x38),
},
#endif
#if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701)
{
I2C_BOARD_INFO("adau1701", 0x34),
},
#endif
#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
#if IS_ENABLED(CONFIG_AD525X_DPOT)
{
I2C_BOARD_INFO("ad5258", 0x18),
},
#endif
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
{
I2C_BOARD_INFO("ad5398", 0xC),
.platform_data = (void *)&ad5398_regulator_data,
},
#endif
#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
{
I2C_BOARD_INFO("adp8860", 0x2A),
.platform_data = (void *)&adp8860_pdata,
},
#endif
#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
{
I2C_BOARD_INFO("adau1373", 0x1A),
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2e),
},
#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
|| IS_ENABLED(CONFIG_BFIN_SPORT)
unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -2439,7 +2411,7 @@ static struct platform_device bfin_sport1_uart_device = {
};
#endif
#endif
#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SPORT)
static struct resource bfin_sport0_resources[] = {
{
.start = SPORT0_TCR1,
......@@ -2482,7 +2454,7 @@ static struct platform_device bfin_sport0_device = {
},
};
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
......@@ -2569,8 +2541,8 @@ static struct platform_device bfin_dpmc = {
},
};
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
IS_ENABLED(CONFIG_SND_BF5XX_AC97)
#define SPORT_REQ(x) \
[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
......@@ -2620,22 +2592,21 @@ static struct resource bfin_snd_resources[][4] = {
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
......@@ -2649,8 +2620,7 @@ static struct platform_device bfin_ad1836_machine = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
static const unsigned ad73311_gpio[] = {
GPIO_PF4,
};
......@@ -2664,22 +2634,21 @@ static struct platform_device bfin_ad73311_machine = {
};
#endif
#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
static struct platform_device bfin_ad73311_codec_device = {
.name = "ad73311",
.id = -1,
};
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
static struct platform_device bfin_eval_adav801_device = {
.name = "bfin-eval-adav801",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -2691,7 +2660,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -2703,7 +2672,7 @@ static struct platform_device bfin_ac97 = {
};
#endif
#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
#define REGULATOR_ADP122 "adp122"
#define REGULATOR_ADP122_UV 2500000
......@@ -2741,8 +2710,7 @@ static struct platform_device adp_switch_device = {
},
};
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
static struct regulator_bulk_data adp122_bulk_data = {
.supply = REGULATOR_ADP122,
};
......@@ -2763,8 +2731,7 @@ static struct platform_device adp122_userspace_consumer_device = {
#endif
#endif
#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
static struct resource iio_gpio_trigger_resources[] = {
[0] = {
......@@ -2781,15 +2748,13 @@ static struct platform_device iio_gpio_trigger = {
};
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
static struct platform_device bf5xx_adau1373_device = {
.name = "bfin-eval-adau1373",
};
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
static struct platform_device bf5xx_adau1701_device = {
.name = "bfin-eval-adau1701",
};
......@@ -2798,73 +2763,72 @@ static struct platform_device bf5xx_adau1701_device = {
static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SPORT)
&bfin_sport0_device,
#endif
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_SL811_HCD)
&sl811_hcd_device,
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
&bfin_sport_spi0_device,
&bfin_sport_spi1_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
&bfin_fb_device,
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -2873,7 +2837,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -2882,11 +2846,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -2895,95 +2859,86 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
&bfin_async_nand_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&stamp_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
&bfin_ad73311_machine,
#endif
#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
&bfin_ad73311_codec_device,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
&bfin_ac97,
#endif
#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
&ad5398_virt_consumer_device,
#endif
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
&ad5398_userspace_consumer_device,
#endif
#endif
#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
&adp_switch_device,
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
&adp122_userspace_consumer_device,
#endif
#endif
#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
&iio_gpio_trigger,
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
&bf5xx_adau1373_device,
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
&bf5xx_adau1701_device,
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
&bfin_eval_adav801_device,
#endif
};
static int __init net2272_init(void)
{
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF6, "net2272");
......
......@@ -16,7 +16,7 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
......@@ -32,10 +32,10 @@
*/
const char bfin_board_name[] = "Bluetechnix TCM BF537";
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
......@@ -144,20 +144,20 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -189,7 +189,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
......@@ -228,7 +228,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
......@@ -249,7 +249,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -298,7 +298,7 @@ static struct platform_device cm_flash_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -397,7 +397,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -452,7 +452,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -479,7 +479,7 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -550,7 +550,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
......@@ -583,7 +583,7 @@ static struct platform_device bfin_mac_device = {
};
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
......@@ -651,15 +651,15 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -668,7 +668,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -677,11 +677,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -690,39 +690,39 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
static int __init net2272_init(void)
{
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PG14, "net2272");
......@@ -742,11 +742,11 @@ static int __init tcm_bf537_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
......
......@@ -33,14 +33,14 @@ const char bfin_board_name[] = "ADI BF538-EZKIT";
*/
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif /* CONFIG_RTC_DRV_BFIN */
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -199,7 +199,7 @@ static struct platform_device bfin_uart2_device = {
#endif /* CONFIG_SERIAL_BFIN_UART2 */
#endif /* CONFIG_SERIAL_BFIN */
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -277,7 +277,7 @@ static struct platform_device bfin_sir2_device = {
#endif /* CONFIG_BFIN_SIR2 */
#endif /* CONFIG_BFIN_SIR */
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -416,7 +416,7 @@ static struct platform_device bfin_sport3_uart_device = {
#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */
#endif /* CONFIG_SERIAL_BFIN_SPORT */
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
};
......@@ -458,7 +458,7 @@ static struct platform_device bfin_can_device = {
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -490,10 +490,9 @@ static struct platform_device smc91x_device = {
};
#endif /* CONFIG_SMC91X */
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
......@@ -521,7 +520,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
#endif /* CONFIG_MTD_M25P80 */
#endif /* CONFIG_SPI_BFIN5XX */
#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
......@@ -538,7 +537,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
};
#endif /* CONFIG_TOUCHSCREEN_AD7879 */
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
......@@ -568,8 +567,7 @@ static struct platform_device bfin_lq035q1_device = {
#endif /* CONFIG_FB_BFIN_LQ035Q1 */
static struct spi_board_info bf538_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -581,7 +579,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif /* CONFIG_MTD_M25P80 */
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
......@@ -592,7 +590,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -601,7 +599,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif /* CONFIG_FB_BFIN_LQ035Q1 */
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -717,7 +715,7 @@ static struct platform_device bf538_spi_master2 = {
},
};
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -766,7 +764,7 @@ static struct platform_device i2c_bfin_twi1_device = {
};
#endif /* CONFIG_I2C_BLACKFIN_TWI */
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
......@@ -814,7 +812,7 @@ static struct platform_device bfin_dpmc = {
},
};
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -839,7 +837,7 @@ static struct physmap_flash_data ezkit_flash_data = {
static struct resource ezkit_flash_resource = {
.start = 0x20000000,
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
.end = 0x202fffff,
#else
.end = 0x203fffff,
......@@ -862,11 +860,11 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -878,18 +876,18 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bf538_spi_master0,
&bf538_spi_master1,
&bf538_spi_master2,
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
&i2c_bfin_twi1_device,
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -901,7 +899,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -916,23 +914,23 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
};
......@@ -942,7 +940,7 @@ static int __init ezkit_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bf538_spi_board_info,
ARRAY_SIZE(bf538_spi_board_info));
#endif
......
......@@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
#include <mach/bf54x-lq043.h>
......@@ -69,7 +69,7 @@ static struct platform_device bf54x_lq043_device = {
};
#endif
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
static unsigned int bf548_keymap[] = {
KEYVAL(0, 0, KEY_ENTER),
KEYVAL(0, 1, KEY_HELP),
......@@ -119,14 +119,14 @@ static struct platform_device bf54x_kpad_device = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -353,7 +353,7 @@ static struct platform_device bfin_uart3_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -456,7 +456,7 @@ static struct platform_device bfin_sir3_device = {
#endif
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
......@@ -491,7 +491,7 @@ static struct platform_device smsc911x_device = {
};
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xFFC03C00,
......@@ -553,7 +553,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -692,7 +692,7 @@ static struct platform_device bfin_sport3_uart_device = {
#endif
#endif
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
#if IS_ENABLED(CONFIG_PATA_BF54X)
static struct resource bfin_atapi_resources[] = {
{
.start = 0xFFC03800,
......@@ -714,7 +714,7 @@ static struct platform_device bfin_atapi_device = {
};
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
......@@ -760,7 +760,7 @@ static struct platform_device bf5xx_nand_device = {
};
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_SDH,
.irq_int0 = IRQ_SDH_MASK0,
......@@ -776,7 +776,7 @@ static struct platform_device bf54x_sdh_device = {
};
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
};
......@@ -814,7 +814,7 @@ static struct platform_device bfin_can_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -854,10 +854,9 @@ static struct platform_device para_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
......@@ -884,7 +883,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -901,8 +900,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
#endif
static struct spi_board_info bf54x_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -914,7 +912,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -924,7 +922,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
.chip_select = 2,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -1006,7 +1004,7 @@ static struct platform_device bf54x_spi_master1 = {
};
#endif /* spi master and devices */
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -1060,7 +1058,7 @@ static struct platform_device i2c_bfin_twi1_device = {
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
......@@ -1112,11 +1110,11 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -1131,7 +1129,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -1146,19 +1144,19 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
&bf54x_lq043_device,
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -1173,43 +1171,43 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
#if IS_ENABLED(CONFIG_PATA_BF54X)
&bfin_atapi_device,
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf54x_sdh_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bf54x_spi_master0,
&bf54x_spi_master1,
#endif
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
&bf54x_kpad_device,
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&para_flash_device,
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can_device,
#endif
......@@ -1220,7 +1218,7 @@ static int __init cm_bf548_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bf54x_spi_board_info,
ARRAY_SIZE(bf54x_spi_board_info));
#endif
......
......@@ -41,7 +41,7 @@ const char bfin_board_name[] = "ADI BF548-EZKIT";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
......@@ -76,7 +76,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
#include <mach/bf54x-lq043.h>
......@@ -108,7 +108,7 @@ static struct platform_device bf54x_lq043_device = {
};
#endif
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
static const unsigned int bf548_keymap[] = {
KEYVAL(0, 0, KEY_ENTER),
KEYVAL(0, 1, KEY_HELP),
......@@ -158,7 +158,7 @@ static struct platform_device bf54x_kpad_device = {
};
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
......@@ -190,7 +190,7 @@ static struct platform_device bfin_rotary_device = {
};
#endif
#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
......@@ -229,14 +229,14 @@ static const struct adxl34x_platform_data adxl34x_info = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -491,7 +491,7 @@ static struct platform_device bfin_uart3_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -594,7 +594,7 @@ static struct platform_device bfin_sir3_device = {
#endif
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
......@@ -629,7 +629,7 @@ static struct platform_device smsc911x_device = {
};
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xFFC03C00,
......@@ -691,7 +691,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -830,7 +830,7 @@ static struct platform_device bfin_sport3_uart_device = {
#endif
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can0_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
......@@ -908,7 +908,7 @@ static struct platform_device bfin_can1_device = {
#endif
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
#if IS_ENABLED(CONFIG_PATA_BF54X)
static struct resource bfin_atapi_resources[] = {
{
.start = 0xFFC03800,
......@@ -930,7 +930,7 @@ static struct platform_device bfin_atapi_device = {
};
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
......@@ -980,7 +980,7 @@ static struct platform_device bf5xx_nand_device = {
};
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_SDH,
......@@ -997,7 +997,7 @@ static struct platform_device bf54x_sdh_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -1045,8 +1045,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
......@@ -1073,7 +1072,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -1495,8 +1494,7 @@ static struct platform_device bfin_gpj_device = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -1508,8 +1506,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -1517,7 +1514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -1527,7 +1524,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -1535,7 +1532,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */
},
#endif
#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
{
.modalias = "adxl34x",
.platform_data = &adxl34x_info,
......@@ -1547,7 +1544,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
};
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
......@@ -1620,8 +1617,7 @@ static struct platform_device bf54x_spi_master1 = {
};
#endif /* spi master and devices */
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
......@@ -1641,8 +1637,7 @@ static const struct ppi_info ppi_info = {
.pin_req = ppi_req,
};
#if defined(CONFIG_VIDEO_VS6624) \
|| defined(CONFIG_VIDEO_VS6624_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_VS6624)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
......@@ -1687,7 +1682,7 @@ static struct platform_device bfin_capture_device = {
};
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -1742,7 +1737,7 @@ static struct platform_device i2c_bfin_twi1_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
......@@ -1751,25 +1746,25 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = 212,
},
#endif
#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PC5,
.platform_data = (void *)&adxl34x_info,
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2f),
},
......@@ -1777,7 +1772,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
};
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
......@@ -1828,8 +1823,8 @@ static struct platform_device bfin_dpmc = {
},
};
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
IS_ENABLED(CONFIG_SND_BF5XX_AC97)
#define SPORT_REQ(x) \
[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
......@@ -1889,35 +1884,35 @@ static struct resource bfin_snd_resources[][4] = {
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
static struct platform_device bfin_ad73311_codec_device = {
.name = "ad73311",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
static struct platform_device bfin_ad1980_codec_device = {
.name = "ad1980",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -1929,7 +1924,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -1962,11 +1957,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_gpj_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -1981,7 +1976,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -1996,23 +1991,23 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
&bf54x_lq043_device,
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -2027,72 +2022,71 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can0_device,
&bfin_can1_device,
#endif
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
#if IS_ENABLED(CONFIG_PATA_BF54X)
&bfin_atapi_device,
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf54x_sdh_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bf54x_spi_master0,
&bf54x_spi_master1,
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
&bf54x_kpad_device,
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
&bfin_ad1980_codec_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
};
......
......@@ -601,36 +601,6 @@
#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
/* Bit masks for HOST_CONTROL */
#define HOST_EN 0x1 /* Host Enable */
#define HOST_END 0x2 /* Host Endianess */
#define DATA_SIZE 0x4 /* Data Size */
#define HOST_RST 0x8 /* Host Reset */
#define HRDY_OVR 0x20 /* Host Ready Override */
#define INT_MODE 0x40 /* Interrupt Mode */
#define BT_EN 0x80 /* Bus Timeout Enable */
#define EHW 0x100 /* Enable Host Write */
#define EHR 0x200 /* Enable Host Read */
#define BDR 0x400 /* Burst DMA Requests */
/* Bit masks for HOST_STATUS */
#define DMA_READY 0x1 /* DMA Ready */
#define FIFOFULL 0x2 /* FIFO Full */
#define FIFOEMPTY 0x4 /* FIFO Empty */
#define DMA_COMPLETE 0x8 /* DMA Complete */
#define HSHK 0x10 /* Host Handshake */
#define HSTIMEOUT 0x20 /* Host Timeout */
#define HIRQ 0x40 /* Host Interrupt Request */
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
#define DMA_DIR 0x100 /* DMA Direction */
#define BTE 0x200 /* Bus Timeout Enabled */
/* Bit masks for HOST_TIMEOUT */
#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
/* Bit masks for TIMER_ENABLE1 */
#define TIMEN8 0x1 /* Timer 8 Enable */
......
......@@ -581,36 +581,6 @@
#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
/* Bit masks for HOST_CONTROL */
#define HOST_EN 0x1 /* Host Enable */
#define HOST_END 0x2 /* Host Endianess */
#define DATA_SIZE 0x4 /* Data Size */
#define HOST_RST 0x8 /* Host Reset */
#define HRDY_OVR 0x20 /* Host Ready Override */
#define INT_MODE 0x40 /* Interrupt Mode */
#define BT_EN 0x80 /* Bus Timeout Enable */
#define EHW 0x100 /* Enable Host Write */
#define EHR 0x200 /* Enable Host Read */
#define BDR 0x400 /* Burst DMA Requests */
/* Bit masks for HOST_STATUS */
#define DMA_READY 0x1 /* DMA Ready */
#define FIFOFULL 0x2 /* FIFO Full */
#define FIFOEMPTY 0x4 /* FIFO Empty */
#define DMA_COMPLETE 0x8 /* DMA Complete */
#define HSHK 0x10 /* Host Handshake */
#define HSTIMEOUT 0x20 /* Host Timeout */
#define HIRQ 0x40 /* Host Interrupt Request */
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
#define DMA_DIR 0x100 /* DMA Direction */
#define BTE 0x200 /* Bus Timeout Enabled */
/* Bit masks for HOST_TIMEOUT */
#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
/* Bit masks for KPAD_CTL */
#define KPAD_EN 0x1 /* Keypad Enable */
......
......@@ -60,7 +60,7 @@
*/
const char bfin_board_name[] = "Acvilon board";
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
......@@ -137,7 +137,7 @@ static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
},
};
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
#if IS_ENABLED(CONFIG_MTD_PLATRAM)
static struct platdata_mtd_ram mtd_ram_data = {
.mapname = "rootfs(RAM)",
.bankwidth = 4,
......@@ -160,7 +160,7 @@ static struct platform_device mtd_ram_device = {
};
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
{
......@@ -194,7 +194,7 @@ static struct platform_device smsc911x_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -246,7 +246,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
static struct mtd_partition bfin_plat_nand_partitions[] = {
{
......@@ -323,7 +323,7 @@ static void bfin_plat_nand_init(void)
}
#endif
#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
static struct mtd_partition bfin_spi_dataflash_partitions[] = {
{
.name = "bootloader",
......@@ -369,7 +369,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = {
};
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
......@@ -408,7 +408,7 @@ static struct platform_device bfin_spi0_device = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -416,7 +416,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 3,
},
#endif
#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
......@@ -472,11 +472,11 @@ static struct platform_device bfin_dpmc = {
static struct platform_device *acvilon_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -484,17 +484,17 @@ static struct platform_device *acvilon_devices[] __initdata = {
&bfin_gpios_device,
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
&bfin_i2c_pca_device,
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
&bfin_async_nand_device,
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
#if IS_ENABLED(CONFIG_MTD_PLATRAM)
&mtd_ram_device,
#endif
......
......@@ -13,7 +13,7 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
......@@ -29,10 +29,10 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF561";
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
......@@ -64,7 +64,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -77,7 +77,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -85,7 +85,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 4,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
......@@ -134,14 +134,14 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -173,7 +173,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
......@@ -208,7 +208,7 @@ static struct platform_device smsc911x_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x24000000,
......@@ -229,7 +229,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x24008000,
......@@ -268,7 +268,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -319,7 +319,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -348,7 +348,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF46
static struct pata_platform_info bfin_pata_platform_data = {
......@@ -385,7 +385,7 @@ static struct platform_device bfin_pata_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -456,54 +456,54 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&para_flash_device,
#endif
};
static int __init net2272_init(void)
{
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF46, "net2272");
......@@ -523,11 +523,11 @@ static int __init cm_bf561_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
......
......@@ -25,7 +25,7 @@
*/
const char bfin_board_name[] = "ADI BF561-EZKIT";
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
......@@ -60,7 +60,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
static struct resource isp1362_hcd_resources[] = {
......@@ -101,7 +101,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x2C000000,
......@@ -129,7 +129,7 @@ static struct platform_device net2272_bfin_device = {
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
......@@ -163,7 +163,7 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -214,7 +214,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -243,7 +243,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -291,7 +291,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
......@@ -330,8 +330,7 @@ static struct platform_device bfin_spi0_device = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -341,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -351,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -375,7 +374,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
......@@ -422,8 +421,7 @@ static struct platform_device bfin_dpmc = {
},
};
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
......@@ -443,8 +441,7 @@ static const struct ppi_info ppi_info = {
.pin_req = ppi_req,
};
#if defined(CONFIG_VIDEO_ADV7183) \
|| defined(CONFIG_VIDEO_ADV7183_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_ADV7183)
#include <media/adv7183.h>
static struct v4l2_input adv7183_inputs[] = {
{
......@@ -515,7 +512,7 @@ static struct platform_device bfin_capture_device = {
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -523,7 +520,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
......@@ -531,8 +528,7 @@ static struct platform_device bfin_ac97 = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
......@@ -550,72 +546,70 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
};
static int __init net2272_init(void)
{
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF11, "net2272");
......@@ -641,12 +635,12 @@ static int __init ezkit_init(void)
if (ret < 0)
return ret;
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#if IS_ENABLED(CONFIG_SMC91X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
SSYNC();
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
bfin_write_FIO0_FLAG_S(1 << 15);
SSYNC();
......
......@@ -42,7 +42,7 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -93,7 +93,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -125,13 +125,13 @@ static struct platform_device bfin_sir0_device = {
static struct platform_device *tepla_devices[] __initdata = {
&smc91x_device,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......
......@@ -39,7 +39,7 @@ const char bfin_board_name[] = "ADI BF609-EZKIT";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
......@@ -74,7 +74,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
......@@ -105,7 +105,7 @@ static struct platform_device bfin_rotary_device = {
};
#endif
#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
#if IS_ENABLED(CONFIG_STMMAC_ETH)
#include <linux/stmmac.h>
#include <linux/phy.h>
......@@ -159,7 +159,7 @@ static struct platform_device bfin_eth_device = {
};
#endif
#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
......@@ -198,14 +198,14 @@ static const struct adxl34x_platform_data adxl34x_info = {
};
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
......@@ -355,7 +355,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
......@@ -408,7 +408,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xFFCC1000,
......@@ -464,7 +464,7 @@ static struct platform_device musb_device = {
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
......@@ -569,7 +569,7 @@ static struct platform_device bfin_sport2_uart_device = {
#endif
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can0_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
......@@ -610,7 +610,7 @@ static struct platform_device bfin_can0_device = {
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
......@@ -660,7 +660,7 @@ static struct platform_device bfin_nand_device = {
};
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_RSI,
......@@ -677,7 +677,7 @@ static struct platform_device bfin_sdh_device = {
};
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
......@@ -741,8 +741,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (w25q32) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
......@@ -773,21 +772,20 @@ static struct bfin_spi3_chip spi_flash_chip_info = {
};
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
static struct bfin_spi3_chip spidev_chip_info = {
.enable_dma = true,
};
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
#include <asm/bfin_sport3.h>
static struct resource bfin_snd_resources[] = {
{
......@@ -841,8 +839,7 @@ static struct platform_device bfin_i2s = {
};
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.76",
......@@ -856,14 +853,13 @@ static struct platform_device bfin_ad1836_machine = {
};
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
static struct platform_device adau1761_device = {
.name = "bfin-eval-adau1x61",
};
#endif
#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
#include <sound/adau17x1.h>
static struct adau1761_platform_data adau1761_info = {
.lineout_mode = ADAU1761_OUTPUT_MODE_LINE,
......@@ -871,8 +867,7 @@ static struct adau1761_platform_data adau1761_info = {
};
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
......@@ -882,7 +877,7 @@ static const unsigned short ppi_req[] = {
P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE)
#if !IS_ENABLED(CONFIG_VIDEO_VS6624)
P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
#endif
......@@ -898,8 +893,7 @@ static const struct ppi_info ppi_info = {
.pin_req = ppi_req,
};
#if defined(CONFIG_VIDEO_VS6624) \
|| defined(CONFIG_VIDEO_VS6624_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_VS6624)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
......@@ -936,8 +930,7 @@ static struct bfin_capture_config bfin_capture_data = {
};
#endif
#if defined(CONFIG_VIDEO_ADV7842) \
|| defined(CONFIG_VIDEO_ADV7842_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_ADV7842)
#include <media/adv7842.h>
static struct v4l2_input adv7842_inputs[] = {
......@@ -1067,8 +1060,7 @@ static struct platform_device bfin_capture_device = {
};
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
|| defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_display.h>
#include <media/blackfin/ppi.h>
......@@ -1090,8 +1082,7 @@ static const struct ppi_info ppi_info = {
.pin_req = ppi_req_disp,
};
#if defined(CONFIG_VIDEO_ADV7511) \
|| defined(CONFIG_VIDEO_ADV7511_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_ADV7511)
#include <media/adv7511.h>
static struct v4l2_output adv7511_outputs[] = {
......@@ -1313,7 +1304,7 @@ static struct platform_device bfin_crypto_crc_device = {
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
......@@ -1679,7 +1670,7 @@ static struct platform_device bfin_gpg_device = {
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
......@@ -1702,8 +1693,7 @@ static struct platform_device bfin_device_gpiokeys = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
......@@ -1715,7 +1705,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
......@@ -1725,7 +1715,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
......@@ -1734,7 +1724,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &spidev_chip_info,
},
#endif
#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
{
.modalias = "adxl34x",
.platform_data = &adxl34x_info,
......@@ -1818,7 +1808,7 @@ static struct platform_device bf60x_spi_master1 = {
};
#endif /* spi master and devices */
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
......@@ -1871,20 +1861,20 @@ static struct platform_device i2c_bfin_twi1_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PC5,
.platform_data = (void *)&adxl34x_info,
},
#endif
#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
{
I2C_BOARD_INFO("adau1761", 0x38),
.platform_data = (void *)&adau1761_info
},
#endif
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
......@@ -1942,11 +1932,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_gpg_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
......@@ -1955,7 +1945,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
......@@ -1964,19 +1954,19 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
#if IS_ENABLED(CONFIG_STMMAC_ETH)
&bfin_eth_device,
#endif
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
......@@ -1988,15 +1978,15 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can0_device,
#endif
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bfin_nand_device,
#endif
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
#if IS_ENABLED(CONFIG_SDH_BFIN)
&bfin_sdh_device,
#endif
......@@ -2005,11 +1995,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bf60x_spi_master1,
#endif
#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
......@@ -2024,34 +2014,29 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_crypto_crc_device,
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
&bfin_i2s,
#endif
#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
&adau1761_device,
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
|| defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
&bfin_display_device,
#endif
......@@ -2075,9 +2060,9 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"),
PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", NULL, "ppi2_16b"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
#if defined(CONFIG_VIDEO_MT9M114) || defined(CONFIG_VIDEO_MT9M114_MODULE)
#if IS_ENABLED(CONFIG_VIDEO_MT9M114)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_8b"),
#elif defined(CONFIG_VIDEO_VS6624) || defined(CONFIG_VIDEO_VS6624_MODULE)
#elif IS_ENABLED(CONFIG_VIDEO_VS6624)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
#else
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_24b"),
......
......@@ -73,24 +73,6 @@ static void clk_reg_write_mask(u32 reg, uint32_t val, uint32_t mask)
bfin_write32(reg, val2);
}
static void clk_reg_set_bits(u32 reg, uint32_t mask)
{
u32 val;
val = bfin_read32(reg);
val |= mask;
bfin_write32(reg, val);
}
static void clk_reg_clear_bits(u32 reg, uint32_t mask)
{
u32 val;
val = bfin_read32(reg);
val &= ~mask;
bfin_write32(reg, val);
}
int wait_for_pll_align(void)
{
int i = 10000;
......
......@@ -210,7 +210,7 @@ void bf609_cpu_pm_enter(suspend_state_t state)
#ifdef CONFIG_PM_BFIN_WAKE_PB15
wakeup |= PB15WE;
# if CONFIG_PM_BFIN_WAKE_PA15_POL
# if CONFIG_PM_BFIN_WAKE_PB15_POL
wakeup_pol |= PB15WE;
# endif
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment