regulator: anatop: Set default voltage selector for vddpu

The code reads the default voltage selector from its register. If the
bootloader disables the regulator, the default voltage selector will be
0 which results in faulty behaviour of this regulator driver.

This patch sets a default voltage selector for vddpu if it is not set in
the register.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

drivers/regulator/anatop-regulator.c

@@ -283,6 +283,14 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 			sreg->sel = 0;
 			sreg->bypass = true;
 		}
+
+		/*
+		 * In case vddpu was disabled by the bootloader, we need to set
+		 * a sane default until imx6-cpufreq was probed and changes the
+		 * voltage to the correct value. In this case we set 1.25V.
+		 */
+		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
+			sreg->sel = 22;
 	} else {
 		rdesc->ops = &anatop_rops;
 	}