arm64: dts: renesas: beacon: Configure programmable clocks

When the board was added, clock drivers were being updated done at
the same time to allow the versaclock driver to properly configure
the modes.  Unfortunately, the updates were not applied to the board
files at the time they should have been, so do it now.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-1-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

@@ -5,6 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clk/versaclock.h>
 
 / {
 	backlight_lvds: backlight-lvds {
@@ -370,12 +371,36 @@ versaclock6_bb: clock-controller@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
-		/* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
+
 		assigned-clocks = <&versaclock6_bb 1>,
 				   <&versaclock6_bb 2>,
 				   <&versaclock6_bb 3>,
 				   <&versaclock6_bb 4>;
 		assigned-clock-rates =	<24000000>, <24000000>, <24000000>, <24576000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
 	};
 };
 

arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi

@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/versaclock.h>
 
 / {
 	memory@48000000 {
@@ -170,7 +171,32 @@ versaclock5: versaclock_som@6a {
 				   <&versaclock5 2>,
 				   <&versaclock5 3>,
 				   <&versaclock5 4>;
+
 		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
 	};
 };