arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio

The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:

    ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
        From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml

Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.

Fixes: 8dd495d1 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8dxl-evk.dts

@@ -121,8 +121,6 @@ &eqos {
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -136,6 +134,9 @@ ethphy0: ethernet-phy@0 {
 			eee-broken-1000t;
 			qca,disable-smarteee;
 			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {