Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: lantiq: use export.h in favour of module.h
  MAINTAINERS: The MIPS git tree has moved.
  MIPS: Fix build error due to missing inclusion of <linux/export.h>.
  MIPS: ASID conflict after CPU hotplug
  MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/flash_setup.c
  MIPS: errloongson2_clock: Fix build error by including linux/module.h
  STAGING: octeon-ethernet: Fix compile error caused by skb_frag_struct change
  MIPS: Hook up process_vm_readv and process_vm_writev system calls.
  MIPS: Kernel hangs occasionally during boot.
  MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD
  MIPS: BCM47xx: fix build with GENERIC_GPIO configuration
  MIPS: NXP: Remove unused source files.
  MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check

MAINTAINERS

@@ -4339,7 +4339,7 @@ MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 W:	http://www.linux-mips.org/
-T:	git git://git.linux-mips.org/pub/scm/linux.git
+T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Supported
 F:	Documentation/mips/

arch/mips/cavium-octeon/flash_setup.c

@@ -17,8 +17,6 @@
 
 static struct map_info flash_map;
 static struct mtd_info *mymtd;
-static int nr_parts;
-static struct mtd_partition *parts;
 static const char *part_probe_types[] = {
 	"cmdlinepart",
 #ifdef CONFIG_MTD_REDBOOT_PARTS
@@ -61,11 +59,8 @@ static int __init flash_init(void)
 		mymtd = do_map_probe("cfi_probe", &flash_map);
 		if (mymtd) {
 			mymtd->owner = THIS_MODULE;
-
-			nr_parts = parse_mtd_partitions(mymtd,
-							part_probe_types,
-							&parts, 0);
-			mtd_device_register(mymtd, parts, nr_parts);
+			mtd_device_parse_register(mymtd, part_probe_types,
+						  0, NULL, 0);
 		} else {
 			pr_err("Failed to register MTD device for flash\n");
 		}

arch/mips/cavium-octeon/smp.c

@@ -207,8 +207,9 @@ void octeon_prepare_cpus(unsigned int max_cpus)
 	 * the other bits alone.
 	 */
 	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
-	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
-			"SMP-IPI", mailbox_interrupt)) {
+	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
+			mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
 	}
 }

arch/mips/emma/common/prom.c

@@ -50,7 +50,7 @@ void __init prom_init(void)
 
 	/* arg[0] is "g", the rest is boot parameters */
 	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+		if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
 		    >= sizeof(arcs_cmdline))
 			break;
 		strcat(arcs_cmdline, arg[i]);

arch/mips/include/asm/mach-bcm47xx/gpio.h

@@ -36,6 +36,8 @@ static inline int gpio_get_value(unsigned gpio)
 	return -EINVAL;
 }
 
+#define gpio_get_value_cansleep	gpio_get_value
+
 static inline void gpio_set_value(unsigned gpio, int value)
 {
 	switch (bcm47xx_bus_type) {
@@ -54,6 +56,19 @@ static inline void gpio_set_value(unsigned gpio, int value)
 	}
 }
 
+#define gpio_set_value_cansleep gpio_set_value
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return 0;
+}
+
+static inline int gpio_is_valid(unsigned gpio)
+{
+	return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+}
+
+
 static inline int gpio_direction_input(unsigned gpio)
 {
 	switch (bcm47xx_bus_type) {
@@ -137,7 +152,4 @@ static inline int gpio_polarity(unsigned gpio, int value)
 }
 
 
-/* cansleep wrappers */
-#include <asm-generic/gpio.h>
-
 #endif /* __BCM47XX_GPIO_H */

arch/mips/include/asm/unistd.h

@@ -365,16 +365,18 @@
 #define __NR_syncfs			(__NR_Linux + 342)
 #define __NR_sendmmsg			(__NR_Linux + 343)
 #define __NR_setns			(__NR_Linux + 344)
+#define __NR_process_vm_readv		(__NR_Linux + 345)
+#define __NR_process_vm_writev		(__NR_Linux + 346)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		344
+#define __NR_Linux_syscalls		346
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		344
+#define __NR_O32_Linux_syscalls		346
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -686,16 +688,18 @@
 #define __NR_syncfs			(__NR_Linux + 301)
 #define __NR_sendmmsg			(__NR_Linux + 302)
 #define __NR_setns			(__NR_Linux + 303)
+#define __NR_process_vm_readv		(__NR_Linux + 304)
+#define __NR_process_vm_writev		(__NR_Linux + 305)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		303
+#define __NR_Linux_syscalls		305
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		303
+#define __NR_64_Linux_syscalls		305
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1012,16 +1016,18 @@
 #define __NR_syncfs			(__NR_Linux + 306)
 #define __NR_sendmmsg			(__NR_Linux + 307)
 #define __NR_setns			(__NR_Linux + 308)
+#define __NR_process_vm_readv		(__NR_Linux + 309)
+#define __NR_process_vm_writev		(__NR_Linux + 310)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		308
+#define __NR_Linux_syscalls		310
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		308
+#define __NR_N32_Linux_syscalls		310
 
 #ifdef __KERNEL__
 

arch/mips/kernel/cevt-r4k.c

@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
 
 /*
  * Compare interrupt can be routed and latched outside the core,
- * so a single execution hazard barrier may not be enough to give
- * it time to clear as seen in the Cause register.  4 time the
- * pipeline depth seems reasonably conservative, and empirically
- * works better in configurations with high CPU/bus clock ratios.
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
+ * changes to propagate to the cause register.
  */
-
-#define compare_change_hazard() \
-	do { \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-	} while (0)
+#define COMPARE_INT_SEEN_TICKS 50
 
 int c0_compare_int_usable(void)
 {
@@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
 	 * IP7 already pending?  Try to clear it by acking the timer.
 	 */
 	if (c0_compare_int_pending()) {
-		write_c0_compare(read_c0_count());
-		compare_change_hazard();
+		cnt = read_c0_count();
+		write_c0_compare(cnt);
+		back_to_back_c0_hazard();
+		while (read_c0_count() < (cnt  + COMPARE_INT_SEEN_TICKS))
+			if (!c0_compare_int_pending())
+				break;
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		compare_change_hazard();
+		back_to_back_c0_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
-	compare_change_hazard();
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (c0_compare_int_pending())
+			break;
 	if (!c0_compare_int_pending())
 		return 0;
-
-	write_c0_compare(read_c0_count());
-	compare_change_hazard();
+	cnt = read_c0_count();
+	write_c0_compare(cnt);
+	back_to_back_c0_hazard();
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (!c0_compare_int_pending())
+			break;
 	if (c0_compare_int_pending())
 		return 0;
 

arch/mips/kernel/cpufreq/loongson2_clock.c

@@ -7,6 +7,7 @@
  * for more details.
  */
 
+#include <linux/module.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
 

arch/mips/kernel/scall32-o32.S

@@ -591,6 +591,8 @@ einval:	li	v0, -ENOSYS
 	sys	sys_syncfs		1
 	sys	sys_sendmmsg		4
 	sys	sys_setns		2
+	sys	sys_process_vm_readv	6	/* 4345 */
+	sys	sys_process_vm_writev	6
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to

arch/mips/kernel/scall64-64.S

@@ -430,4 +430,6 @@ sys_call_table:
 	PTR	sys_syncfs
 	PTR	sys_sendmmsg
 	PTR	sys_setns
+	PTR	sys_process_vm_readv
+	PTR	sys_process_vm_writev		/* 5305 */
 	.size	sys_call_table,.-sys_call_table

arch/mips/kernel/scall64-n32.S

@@ -430,4 +430,6 @@ EXPORT(sysn32_call_table)
 	PTR	sys_syncfs
 	PTR	compat_sys_sendmmsg
 	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv
+	PTR	compat_sys_process_vm_writev	/* 6310 */
 	.size	sysn32_call_table,.-sysn32_call_table

arch/mips/kernel/scall64-o32.S

@@ -548,4 +548,6 @@ sys_call_table:
 	PTR	sys_syncfs
 	PTR	compat_sys_sendmmsg
 	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv	/* 4345 */
+	PTR	compat_sys_process_vm_writev
 	.size	sys_call_table,.-sys_call_table

arch/mips/kernel/traps.c

@@ -1596,6 +1596,7 @@ void __cpuinit per_cpu_trap_init(void)
 	}
 #endif /* CONFIG_MIPS_MT_SMTC */
 
+	if (!cpu_data[cpu].asid_cache)
 		cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 
 	atomic_inc(&init_mm.mm_count);

arch/mips/lantiq/clk.c

@@ -7,7 +7,7 @@
  * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>

arch/mips/lantiq/devices.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>

arch/mips/lantiq/prom.c

@@ -6,7 +6,7 @@
  * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>

arch/mips/lantiq/setup.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <asm/bootinfo.h>

arch/mips/lantiq/xway/clk-ase.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 

arch/mips/lantiq/xway/clk-xway.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 

arch/mips/lantiq/xway/devices.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mtd/physmap.h>

arch/mips/lantiq/xway/dma.c

@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <lantiq_soc.h>
 #include <xway_dma.h>

arch/mips/lantiq/xway/gpio.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/ioport.h>

arch/mips/lantiq/xway/gpio_ebu.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>

arch/mips/lantiq/xway/gpio_stp.c

@@ -9,7 +9,7 @@
 
 #include <linux/slab.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>

arch/mips/lantiq/xway/prom-ase.c

@@ -6,7 +6,7 @@
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>

arch/mips/lantiq/xway/prom-xway.c

@@ -6,7 +6,7 @@
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>

arch/mips/lantiq/xway/reset.c

@@ -10,7 +10,7 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/reboot.h>
 
 #include <lantiq_soc.h>

arch/mips/nxp/pnx8550/common/pci.c

-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
-	.start	= PNX8550_PCIIO + 0x1000,	/* reserve regacy I/O space */
-	.end	= PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
-	.name	= "pci IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.start	= PNX8550_PCIMEM,
-	.end	= PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
-	.name	= "pci memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
-	.pci_ops	= &pnx8550_pci_ops,
-	.io_map_base	= PNX8550_PORT_BASE,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
-	int pci_mem_code;
-	int mem_size = get_system_mem_size() >> 20;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* Calc the PCI mem size code */
-	if (mem_size >= 128)
-		pci_mem_code = SIZE_128M;
-	else if (mem_size >= 64)
-		pci_mem_code = SIZE_64M;
-	else if (mem_size >= 32)
-		pci_mem_code = SIZE_32M;
-	else
-		pci_mem_code = SIZE_16M;
-
-	/* Set PCI_XIO registers */
-	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
-	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
-	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
-	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
-	/* Send memory transaction via PCI_BASE2 */
-	outl(0x00000001, PCI_BASE | PCI_IO);
-
-	/* Unlock the setup register */
-	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
-	/*
-	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
-	 * to work, and in order for bus_to_baddr to work without any
-	 * hacks.
-	 */
-	outl(0x00000000, PCI_BASE | PCI_BASE10);
-
-	/*
-	 *These two bars are set by default or the boot code.
-	 * However, it's safer to set them here so we're not boot
-	 * code dependent.
-	 */
-	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
-	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
-
-	outl(PCI_EN_TA |
-	     PCI_EN_PCI2MMI |
-	     PCI_EN_XIO |
-	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
-	     PCI_SETUP_BASE18_EN |
-	     PCI_SETUP_BASE14_EN |
-	     PCI_SETUP_BASE10_PREF |
-	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
-	     PCI_SETUP_CFGMANAGE_EN |
-	     PCI_SETUP_PCIARB_EN,
-	     PCI_BASE |
-	     PCI_SETUP);	/* PCI_SETUP */
-	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
-
-	register_pci_controller(&pnx8550_controller);
-
-	return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);

arch/mips/nxp/pnx8550/common/setup.c

-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- *  Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	},
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	char* argptr;
-
-	board_setup();  /* board specific setup */
-
-        _machine_restart = pnx8550_machine_restart;
-        _machine_halt = pnx8550_machine_halt;
-        pm_power_off = pnx8550_machine_power_off;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* IO/MEM resources. */
-	set_io_port_base(PNX8550_PORT_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = ~0;
-	iomem_resource.start = 0;
-	iomem_resource.end = ~0;
-
-	/* Request I/O space for devices on this board */
-	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, standard_io_resources + i);
-
-	/* Place the Mode Control bit for GPIO pin 16 in primary function */
-	/* Pin 16 is used by UART1, UA1_TX                                */
-	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
-			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
-			PNX8550_GPIO_MC1);
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
-		argptr += strlen("console=ttyS");
-		pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
-		/* We must initialize the UART (console) before early printk */
-		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
-		ip3106_lcr(UART_BASE, pnx8550_console_port) =
-			PNX8XXX_UART_LCR_8BIT;
-		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
-	}
-}

arch/mips/pci/pci-alchemy.c

@@ -7,6 +7,7 @@
  * Support for all devices (greater than 16) added by David Gathright.
  */
 
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>

arch/mips/pci/pci-lantiq.c

@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 
 #include <asm/pci.h>

arch/mips/pmc-sierra/yosemite/prom.c

@@ -102,7 +102,7 @@ void __init prom_init(void)
 
 	/* Get the boot parameters */
 	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
+		if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
 		    sizeof(arcs_cmdline))
 			break;
 

drivers/staging/octeon/ethernet-tx.c

@@ -275,7 +275,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 		CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
-			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
 			hw_buffer.s.size = fs->size;
 			CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
 		}