ARM i.MX: iomux v1 initialization away from initcall

This saves us from soc level dispatching in generic files
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/mach-imx/mm-imx1.c

@@ -25,6 +25,7 @@
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/irqs.h>
+#include <mach/iomux-v1.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
 	imx_map_entry(MX1, IO, MT_DEVICE),
@@ -39,6 +40,8 @@ void __init imx1_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
 	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
+	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+			MX1_NUM_GPIO_PORT);
 }
 
 static struct mxc_gpio_port imx1_gpio_ports[] = {

arch/arm/mach-imx/mm-imx21.c

@@ -26,6 +26,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/irqs.h>
+#include <mach/iomux-v1.h>
 
 /* MX21 memory map definition */
 static struct map_desc imx21_io_desc[] __initdata = {
@@ -65,6 +66,8 @@ void __init imx21_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
 	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
+	imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
+			MX21_NUM_GPIO_PORT);
 }
 
 static struct mxc_gpio_port imx21_gpio_ports[] = {

arch/arm/mach-imx/mm-imx27.c

@@ -26,6 +26,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/irqs.h>
+#include <mach/iomux-v1.h>
 
 /* MX27 memory map definition */
 static struct map_desc imx27_io_desc[] __initdata = {
@@ -65,6 +66,8 @@ void __init imx27_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
 	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
+	imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
+			MX27_NUM_GPIO_PORT);
 }
 
 static struct mxc_gpio_port imx27_gpio_ports[] = {

arch/arm/plat-mxc/include/mach/iomux-v1.h

@@ -100,4 +100,6 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		const char *label);
 extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 
+extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
+
 #endif /* __MACH_IOMUX_V1_H__ */

arch/arm/plat-mxc/iomux-v1.c

@@ -211,28 +211,10 @@ void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
 }
 EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
 
-static int imx_iomuxv1_init(void)
+int __init imx_iomuxv1_init(void __iomem *base, int numports)
 {
-#ifdef CONFIG_ARCH_MX1
-	if (cpu_is_mx1()) {
-		imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
-		imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
-	} else
-#endif
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21()) {
-		imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
-		imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
-	} else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27()) {
-		imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
-		imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
-	} else
-#endif
-		return -ENODEV;
+	imx_iomuxv1_baseaddr = base;
+	imx_iomuxv1_numports = numports;
 
 	return 0;
 }
-pure_initcall(imx_iomuxv1_init);