Commit ff3b00a0 authored by Steve Hodgson's avatar Steve Hodgson Committed by David S. Miller

sfc: Move PHY software state initialisation from init() into probe()

This prevents efx->link_advertising from being blatted during
a reset.

The phy_short_reach sysfs node is now destroyed later in the
port shutdown process, so check for STATE_RUNNING after
acquiring the rtnl_lock (just like in set_phy_flash_cfg).
Signed-off-by: default avatarBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ed4b2019
......@@ -741,14 +741,14 @@ static int efx_probe_port(struct efx_nic *efx)
EFX_LOG(efx, "create port\n");
if (phy_flash_cfg)
efx->phy_mode = PHY_MODE_SPECIAL;
/* Connect up MAC/PHY operations table */
rc = efx->type->probe_port(efx);
if (rc)
goto err;
if (phy_flash_cfg)
efx->phy_mode = PHY_MODE_SPECIAL;
/* Sanity check MAC address */
if (is_valid_ether_addr(efx->mac_address)) {
memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN);
......
......@@ -925,6 +925,7 @@ static int falcon_probe_port(struct efx_nic *efx)
static void falcon_remove_port(struct efx_nic *efx)
{
efx->phy_op->remove(efx);
efx_nic_free_buffer(efx, &efx->stats_buffer);
}
......
......@@ -304,31 +304,47 @@ static u32 mcdi_to_ethtool_media(u32 media)
static int efx_mcdi_phy_probe(struct efx_nic *efx)
{
struct efx_mcdi_phy_cfg *phy_cfg;
struct efx_mcdi_phy_cfg *phy_data;
u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
u32 caps;
int rc;
/* TODO: Move phy_data initialisation to
* phy_op->probe/remove, rather than init/fini */
phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL);
if (phy_cfg == NULL) {
rc = -ENOMEM;
goto fail_alloc;
}
rc = efx_mcdi_get_phy_cfg(efx, phy_cfg);
/* Initialise and populate phy_data */
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
if (phy_data == NULL)
return -ENOMEM;
rc = efx_mcdi_get_phy_cfg(efx, phy_data);
if (rc != 0)
goto fail;
efx->phy_type = phy_cfg->type;
/* Read initial link advertisement */
BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
outbuf, sizeof(outbuf), NULL);
if (rc)
goto fail;
/* Fill out nic state */
efx->phy_data = phy_data;
efx->phy_type = phy_data->type;
efx->mdio_bus = phy_cfg->channel;
efx->mdio.prtad = phy_cfg->port;
efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
efx->mdio_bus = phy_data->channel;
efx->mdio.prtad = phy_data->port;
efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
efx->mdio.mode_support = 0;
if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C22;
if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
efx->link_advertising =
mcdi_to_ethtool_cap(phy_data->media, caps);
else
phy_data->forced_cap = caps;
/* Assert that we can map efx -> mcdi loopback modes */
BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE);
BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA);
......@@ -365,46 +381,6 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx)
* but by convention we don't */
efx->loopback_modes &= ~(1 << LOOPBACK_NONE);
kfree(phy_cfg);
return 0;
fail:
kfree(phy_cfg);
fail_alloc:
return rc;
}
static int efx_mcdi_phy_init(struct efx_nic *efx)
{
struct efx_mcdi_phy_cfg *phy_data;
u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
u32 caps;
int rc;
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
if (phy_data == NULL)
return -ENOMEM;
rc = efx_mcdi_get_phy_cfg(efx, phy_data);
if (rc != 0)
goto fail;
efx->phy_data = phy_data;
BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
outbuf, sizeof(outbuf), NULL);
if (rc)
goto fail;
caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
efx->link_advertising =
mcdi_to_ethtool_cap(phy_data->media, caps);
else
phy_data->forced_cap = caps;
return 0;
fail:
......@@ -504,7 +480,7 @@ static bool efx_mcdi_phy_poll(struct efx_nic *efx)
return !efx_link_state_equal(&efx->link_state, &old_state);
}
static void efx_mcdi_phy_fini(struct efx_nic *efx)
static void efx_mcdi_phy_remove(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data = efx->phy_data;
......@@ -586,10 +562,11 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec
struct efx_phy_operations efx_mcdi_phy_ops = {
.probe = efx_mcdi_phy_probe,
.init = efx_mcdi_phy_init,
.init = efx_port_dummy_op_int,
.reconfigure = efx_mcdi_phy_reconfigure,
.poll = efx_mcdi_phy_poll,
.fini = efx_mcdi_phy_fini,
.fini = efx_port_dummy_op_void,
.remove = efx_mcdi_phy_remove,
.get_settings = efx_mcdi_phy_get_settings,
.set_settings = efx_mcdi_phy_set_settings,
.run_tests = NULL,
......
......@@ -524,6 +524,7 @@ struct efx_phy_operations {
int (*probe) (struct efx_nic *efx);
int (*init) (struct efx_nic *efx);
void (*fini) (struct efx_nic *efx);
void (*remove) (struct efx_nic *efx);
int (*reconfigure) (struct efx_nic *efx);
bool (*poll) (struct efx_nic *efx);
void (*get_settings) (struct efx_nic *efx,
......
......@@ -137,6 +137,14 @@ static int qt202x_reset_phy(struct efx_nic *efx)
static int qt202x_phy_probe(struct efx_nic *efx)
{
struct qt202x_phy_data *phy_data;
phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
phy_data->phy_mode = efx->phy_mode;
efx->mdio.mmds = QT202X_REQUIRED_DEVS;
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
......@@ -145,7 +153,6 @@ static int qt202x_phy_probe(struct efx_nic *efx)
static int qt202x_phy_init(struct efx_nic *efx)
{
struct qt202x_phy_data *phy_data;
u32 devid;
int rc;
......@@ -155,17 +162,11 @@ static int qt202x_phy_init(struct efx_nic *efx)
return rc;
}
phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
efx_mdio_id_rev(devid));
phy_data->phy_mode = efx->phy_mode;
return 0;
}
......@@ -224,7 +225,7 @@ static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecm
mdio45_ethtool_gset(&efx->mdio, ecmd);
}
static void qt202x_phy_fini(struct efx_nic *efx)
static void qt202x_phy_remove(struct efx_nic *efx)
{
/* Free the context block */
kfree(efx->phy_data);
......@@ -236,7 +237,8 @@ struct efx_phy_operations falcon_qt202x_phy_ops = {
.init = qt202x_phy_init,
.reconfigure = qt202x_phy_reconfigure,
.poll = qt202x_phy_poll,
.fini = qt202x_phy_fini,
.fini = efx_port_dummy_op_void,
.remove = qt202x_phy_remove,
.get_settings = qt202x_phy_get_settings,
.set_settings = efx_mdio_set_settings,
};
......@@ -133,6 +133,7 @@ static int siena_probe_port(struct efx_nic *efx)
void siena_remove_port(struct efx_nic *efx)
{
efx->phy_op->remove(efx);
efx_nic_free_buffer(efx, &efx->stats_buffer);
}
......
......@@ -202,10 +202,14 @@ static ssize_t set_phy_short_reach(struct device *dev,
int rc;
rtnl_lock();
if (efx->state != STATE_RUNNING) {
rc = -EBUSY;
} else {
efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
MDIO_PMA_10GBT_TXPWR_SHORT,
count != 0 && *buf != '0');
rc = efx_reconfigure_port(efx);
}
rtnl_unlock();
return rc < 0 ? rc : (ssize_t)count;
......@@ -298,36 +302,62 @@ static int tenxpress_init(struct efx_nic *efx)
return 0;
}
static int sfx7101_phy_probe(struct efx_nic *efx)
static int tenxpress_phy_probe(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data;
int rc;
/* Allocate phy private storage */
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
phy_data->phy_mode = efx->phy_mode;
/* Create any special files */
if (efx->phy_type == PHY_TYPE_SFT9001B) {
rc = device_create_file(&efx->pci_dev->dev,
&dev_attr_phy_short_reach);
if (rc)
goto fail;
}
if (efx->phy_type == PHY_TYPE_SFX7101) {
efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
efx->mdio.mode_support = MDIO_SUPPORTS_C45;
efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
return 0;
}
static int sft9001_phy_probe(struct efx_nic *efx)
{
efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
ADVERTISED_10000baseT_Full);
} else {
efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS |
efx->loopback_modes = (SFT9001_LOOPBACKS |
FALCON_XMAC_LOOPBACKS |
FALCON_GMAC_LOOPBACKS);
efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
ADVERTISED_10000baseT_Full |
ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full);
}
return 0;
fail:
kfree(efx->phy_data);
efx->phy_data = NULL;
return rc;
}
static int tenxpress_phy_init(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data;
int rc = 0;
int rc;
falcon_board(efx)->type->init_phy(efx);
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
phy_data->phy_mode = efx->phy_mode;
if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
if (efx->phy_type == PHY_TYPE_SFT9001A) {
int reg;
......@@ -341,44 +371,27 @@ static int tenxpress_phy_init(struct efx_nic *efx)
rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
goto fail;
return rc;
rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
goto fail;
return rc;
}
rc = tenxpress_init(efx);
if (rc < 0)
goto fail;
return rc;
/* Initialise advertising flags */
efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
ADVERTISED_10000baseT_Full);
if (efx->phy_type != PHY_TYPE_SFX7101)
efx->link_advertising |= (ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full);
/* Reinitialise flow control settings */
efx_link_set_wanted_fc(efx, efx->wanted_fc);
efx_mdio_an_reconfigure(efx);
if (efx->phy_type == PHY_TYPE_SFT9001B) {
rc = device_create_file(&efx->pci_dev->dev,
&dev_attr_phy_short_reach);
if (rc)
goto fail;
}
schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
/* Let XGXS and SerDes out of reset */
falcon_reset_xaui(efx);
return 0;
fail:
kfree(efx->phy_data);
efx->phy_data = NULL;
return rc;
}
/* Perform a "special software reset" on the PHY. The caller is
......@@ -589,15 +602,10 @@ static bool tenxpress_phy_poll(struct efx_nic *efx)
return !efx_link_state_equal(&efx->link_state, &old_state);
}
static void tenxpress_phy_fini(struct efx_nic *efx)
static void sfx7101_phy_fini(struct efx_nic *efx)
{
int reg;
if (efx->phy_type == PHY_TYPE_SFT9001B)
device_remove_file(&efx->pci_dev->dev,
&dev_attr_phy_short_reach);
if (efx->phy_type == PHY_TYPE_SFX7101) {
/* Power down the LNPGA */
reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
......@@ -606,7 +614,13 @@ static void tenxpress_phy_fini(struct efx_nic *efx)
* off the power to the PHY, won't get run until the LNPGA
* powerdown has been given long enough to complete. */
schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
}
}
static void tenxpress_phy_remove(struct efx_nic *efx)
{
if (efx->phy_type == PHY_TYPE_SFT9001B)
device_remove_file(&efx->pci_dev->dev,
&dev_attr_phy_short_reach);
kfree(efx->phy_data);
efx->phy_data = NULL;
......@@ -819,11 +833,12 @@ static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
}
struct efx_phy_operations falcon_sfx7101_phy_ops = {
.probe = sfx7101_phy_probe,
.probe = tenxpress_phy_probe,
.init = tenxpress_phy_init,
.reconfigure = tenxpress_phy_reconfigure,
.poll = tenxpress_phy_poll,
.fini = tenxpress_phy_fini,
.fini = sfx7101_phy_fini,
.remove = tenxpress_phy_remove,
.get_settings = tenxpress_get_settings,
.set_settings = tenxpress_set_settings,
.set_npage_adv = sfx7101_set_npage_adv,
......@@ -832,11 +847,12 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
};
struct efx_phy_operations falcon_sft9001_phy_ops = {
.probe = sft9001_phy_probe,
.probe = tenxpress_phy_probe,
.init = tenxpress_phy_init,
.reconfigure = tenxpress_phy_reconfigure,
.poll = tenxpress_phy_poll,
.fini = tenxpress_phy_fini,
.fini = efx_port_dummy_op_void,
.remove = tenxpress_phy_remove,
.get_settings = tenxpress_get_settings,
.set_settings = tenxpress_set_settings,
.set_npage_adv = sft9001_set_npage_adv,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment