Commit ff3d3ee6 authored by Johan Hovold's avatar Johan Hovold Committed by Ben Hutchings

USB: serial: ch341: fix modem-status handling

commit a0467a96 upstream.

The modem-status register was read as part of device configuration at
port_probe and then again at open (and reset-resume). During open (and
reset-resume) the MSR was read before submitting the interrupt URB,
something which could lead to an MSR-change going unnoticed when it
races with open (reset-resume).

Fix this by dropping the redundant reconfiguration of the port at every
open, and only read the MSR after the interrupt URB has been submitted.

Fixes: 664d5df9 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent 4675edf4
...@@ -246,21 +246,11 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) ...@@ -246,21 +246,11 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
if (r < 0) if (r < 0)
goto out; goto out;
/* expect 0xff 0xee */
r = ch341_get_status(dev, priv);
if (r < 0)
goto out;
r = ch341_set_baudrate_lcr(dev, priv, 0); r = ch341_set_baudrate_lcr(dev, priv, 0);
if (r < 0) if (r < 0)
goto out; goto out;
r = ch341_set_handshake(dev, priv->line_control); r = ch341_set_handshake(dev, priv->line_control);
if (r < 0)
goto out;
/* expect 0x9f 0xee */
r = ch341_get_status(dev, priv);
out: kfree(buffer); out: kfree(buffer);
return r; return r;
...@@ -332,14 +322,9 @@ static void ch341_close(struct usb_serial_port *port) ...@@ -332,14 +322,9 @@ static void ch341_close(struct usb_serial_port *port)
/* open this device, set default parameters */ /* open this device, set default parameters */
static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
{ {
struct usb_serial *serial = port->serial;
struct ch341_private *priv = usb_get_serial_port_data(port); struct ch341_private *priv = usb_get_serial_port_data(port);
int r; int r;
r = ch341_configure(serial->dev, priv);
if (r)
return r;
if (tty) if (tty)
ch341_set_termios(tty, port, NULL); ch341_set_termios(tty, port, NULL);
...@@ -351,6 +336,12 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) ...@@ -351,6 +336,12 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
return r; return r;
} }
r = ch341_get_status(port->serial->dev, priv);
if (r < 0) {
dev_err(&port->dev, "failed to read modem status: %d\n", r);
goto err_kill_interrupt_urb;
}
r = usb_serial_generic_open(tty, port); r = usb_serial_generic_open(tty, port);
if (r) if (r)
goto err_kill_interrupt_urb; goto err_kill_interrupt_urb;
...@@ -593,6 +584,12 @@ static int ch341_reset_resume(struct usb_serial *serial) ...@@ -593,6 +584,12 @@ static int ch341_reset_resume(struct usb_serial *serial)
ret); ret);
return ret; return ret;
} }
ret = ch341_get_status(port->serial->dev, priv);
if (ret < 0) {
dev_err(&port->dev, "failed to read modem status: %d\n",
ret);
}
} }
return usb_serial_generic_resume(serial); return usb_serial_generic_resume(serial);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment