Commit ffb5d6fe authored by Dave Airlie's avatar Dave Airlie

Merge tag 'drm-misc-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

 - core: Make atomic_enable and disable optional for CRTC
 - dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration
            improvements for older controller versions
 - omap: a fix for the CEC clock management policy
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411151658.orm46ccd5zmrw27l@flea
parents d47703d4 1a07a94b
......@@ -1037,6 +1037,31 @@ void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
}
EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
/* Filter out invalid setups to avoid configuring SCDC and scrambling */
static bool dw_hdmi_support_scdc(struct dw_hdmi *hdmi)
{
struct drm_display_info *display = &hdmi->connector.display_info;
/* Completely disable SCDC support for older controllers */
if (hdmi->version < 0x200a)
return false;
/* Disable if SCDC is not supported, or if an HF-VSDB block is absent */
if (!display->hdmi.scdc.supported ||
!display->hdmi.scdc.scrambling.supported)
return false;
/*
* Disable if display only support low TMDS rates and scrambling
* for low rates is not supported either
*/
if (!display->hdmi.scdc.scrambling.low_rates &&
display->max_tmds_clock <= 340000)
return false;
return true;
}
/*
* HDMI2.0 Specifies the following procedure for High TMDS Bit Rates:
* - The Source shall suspend transmission of the TMDS clock and data
......@@ -1055,7 +1080,7 @@ void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi)
unsigned long mtmdsclock = hdmi->hdmi_data.video_mode.mtmdsclock;
/* Control for TMDS Bit Period/TMDS Clock-Period Ratio */
if (hdmi->connector.display_info.hdmi.scdc.supported) {
if (dw_hdmi_support_scdc(hdmi)) {
if (mtmdsclock > HDMI14_MAX_TMDSCLK)
drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 1);
else
......@@ -1579,8 +1604,9 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
/* Set up HDMI_FC_INVIDCONF */
inv_val = (hdmi->hdmi_data.hdcp_enable ||
vmode->mtmdsclock > HDMI14_MAX_TMDSCLK ||
hdmi_info->scdc.scrambling.low_rates ?
(dw_hdmi_support_scdc(hdmi) &&
(vmode->mtmdsclock > HDMI14_MAX_TMDSCLK ||
hdmi_info->scdc.scrambling.low_rates)) ?
HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE :
HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE);
......@@ -1646,7 +1672,7 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
}
/* Scrambling Control */
if (hdmi_info->scdc.supported) {
if (dw_hdmi_support_scdc(hdmi)) {
if (vmode->mtmdsclock > HDMI14_MAX_TMDSCLK ||
hdmi_info->scdc.scrambling.low_rates) {
/*
......
......@@ -1034,7 +1034,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
funcs->atomic_disable(crtc, old_crtc_state);
else if (funcs->disable)
funcs->disable(crtc);
else
else if (funcs->dpms)
funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
if (!(dev->irq_enabled && dev->num_crtcs))
......@@ -1277,10 +1277,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
if (new_crtc_state->enable) {
DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
crtc->base.id, crtc->name);
if (funcs->atomic_enable)
funcs->atomic_enable(crtc, old_crtc_state);
else
else if (funcs->commit)
funcs->commit(crtc);
}
}
......
......@@ -175,6 +175,7 @@ static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
REG_FLD_MOD(core->base, HDMI_CORE_SYS_INTR_UNMASK4, 0, 3, 3);
hdmi_wp_clear_irqenable(core->wp, HDMI_IRQ_CORE);
hdmi_wp_set_irqstatus(core->wp, HDMI_IRQ_CORE);
REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0, 5, 0);
hdmi4_core_disable(core);
return 0;
}
......@@ -182,16 +183,24 @@ static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
if (err)
return err;
/*
* Initialize CEC clock divider: CEC needs 2MHz clock hence
* set the divider to 24 to get 48/24=2MHz clock
*/
REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0x18, 5, 0);
/* Clear TX FIFO */
if (!hdmi_cec_clear_tx_fifo(adap)) {
pr_err("cec-%s: could not clear TX FIFO\n", adap->name);
return -EIO;
err = -EIO;
goto err_disable_clk;
}
/* Clear RX FIFO */
if (!hdmi_cec_clear_rx_fifo(adap)) {
pr_err("cec-%s: could not clear RX FIFO\n", adap->name);
return -EIO;
err = -EIO;
goto err_disable_clk;
}
/* Clear CEC interrupts */
......@@ -236,6 +245,12 @@ static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, temp);
}
return 0;
err_disable_clk:
REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0, 5, 0);
hdmi4_core_disable(core);
return err;
}
static int hdmi_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
......@@ -333,11 +348,8 @@ int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
return ret;
core->wp = wp;
/*
* Initialize CEC clock divider: CEC needs 2MHz clock hence
* set the devider to 24 to get 48/24=2MHz clock
*/
REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0x18, 5, 0);
/* Disable clock initially, hdmi_cec_adap_enable() manages it */
REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0, 5, 0);
ret = cec_register_adapter(core->adap, &pdev->dev);
if (ret < 0) {
......
......@@ -708,7 +708,7 @@ int hdmi4_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
else
acore.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
/*
* The I2S input word length is twice the lenght given in the IEC-60958
* The I2S input word length is twice the length given in the IEC-60958
* status word. If the word size is greater than
* 20 bits, increment by one.
*/
......
......@@ -48,8 +48,13 @@ static enum drm_mode_status
sun8i_dw_hdmi_mode_valid_h6(struct drm_connector *connector,
const struct drm_display_mode *mode)
{
/* This is max for HDMI 2.0b (4K@60Hz) */
if (mode->clock > 594000)
/*
* Controller support maximum of 594 MHz, which correlates to
* 4K@60Hz 4:4:4 or RGB. However, for frequencies greater than
* 340 MHz scrambling has to be enabled. Because scrambling is
* not yet implemented, just limit to 340 MHz for now.
*/
if (mode->clock > 340000)
return MODE_CLOCK_HIGH;
return MODE_OK;
......
......@@ -227,7 +227,7 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
err_unregister_gates:
for (i = 0; i < CLK_NUM; i++)
if (clk_data->hws[i])
if (!IS_ERR_OR_NULL(clk_data->hws[i]))
clk_hw_unregister_gate(clk_data->hws[i]);
clk_disable_unprepare(tcon_top->bus);
err_assert_reset:
......@@ -245,6 +245,7 @@ static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
of_clk_del_provider(dev->of_node);
for (i = 0; i < CLK_NUM; i++)
if (clk_data->hws[i])
clk_hw_unregister_gate(clk_data->hws[i]);
clk_disable_unprepare(tcon_top->bus);
......
......@@ -418,6 +418,8 @@ struct drm_crtc_helper_funcs {
* Drivers can use the @old_crtc_state input parameter if the operations
* needed to enable the CRTC don't depend solely on the new state but
* also on the transition between the old state and the new state.
*
* This function is optional.
*/
void (*atomic_enable)(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
......@@ -441,6 +443,8 @@ struct drm_crtc_helper_funcs {
* parameter @old_crtc_state which could be used to access the old
* state. Atomic drivers should consider to use this one instead
* of @disable.
*
* This function is optional.
*/
void (*atomic_disable)(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment