Commit ffe167b0 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'regulator/topic/max8649',...

Merge remote-tracking branches 'regulator/topic/max8649', 'regulator/topic/mode', 'regulator/topic/mt6397', 'regulator/topic/pfuze100' and 'regulator/topic/qcom-rpm' into regulator-next
Mediatek MT6397 Regulator Driver
Required properties:
- compatible: "mediatek,mt6397-regulator"
- mt6397regulator: List of regulators provided by this controller. It is named
according to its regulator type, buck_<name> and ldo_<name>.
The definition for each of these nodes is defined using the standard binding
for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are::
BUCK:
buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu,
buck_vdrm, buck_vio18
LDO:
ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch,
ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
ldo_vibr
Example:
pmic {
compatible = "mediatek,mt6397";
mt6397regulator: mt6397regulator {
compatible = "mediatek,mt6397-regulator";
mt6397_vpca15_reg: buck_vpca15 {
regulator-compatible = "buck_vpca15";
regulator-name = "vpca15";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <200>;
};
mt6397_vpca7_reg: buck_vpca7 {
regulator-compatible = "buck_vpca7";
regulator-name = "vpca7";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <115>;
};
mt6397_vsramca15_reg: buck_vsramca15 {
regulator-compatible = "buck_vsramca15";
regulator-name = "vsramca15";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <115>;
};
mt6397_vsramca7_reg: buck_vsramca7 {
regulator-compatible = "buck_vsramca7";
regulator-name = "vsramca7";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <115>;
};
mt6397_vcore_reg: buck_vcore {
regulator-compatible = "buck_vcore";
regulator-name = "vcore";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <115>;
};
mt6397_vgpu_reg: buck_vgpu {
regulator-compatible = "buck_vgpu";
regulator-name = "vgpu";
regulator-min-microvolt = < 700000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <115>;
};
mt6397_vdrm_reg: buck_vdrm {
regulator-compatible = "buck_vdrm";
regulator-name = "vdrm";
regulator-min-microvolt = < 800000>;
regulator-max-microvolt = <1400000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <500>;
};
mt6397_vio18_reg: buck_vio18 {
regulator-compatible = "buck_vio18";
regulator-name = "vio18";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2120000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <500>;
};
mt6397_vtcxo_reg: ldo_vtcxo {
regulator-compatible = "ldo_vtcxo";
regulator-name = "vtcxo";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <90>;
};
mt6397_va28_reg: ldo_va28 {
regulator-compatible = "ldo_va28";
regulator-name = "va28";
/* fixed output 2.8 V */
regulator-enable-ramp-delay = <218>;
};
mt6397_vcama_reg: ldo_vcama {
regulator-compatible = "ldo_vcama";
regulator-name = "vcama";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vio28_reg: ldo_vio28 {
regulator-compatible = "ldo_vio28";
regulator-name = "vio28";
/* fixed output 2.8 V */
regulator-enable-ramp-delay = <240>;
};
mt6397_usb_reg: ldo_vusb {
regulator-compatible = "ldo_vusb";
regulator-name = "vusb";
/* fixed output 3.3 V */
regulator-enable-ramp-delay = <218>;
};
mt6397_vmc_reg: ldo_vmc {
regulator-compatible = "ldo_vmc";
regulator-name = "vmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vmch_reg: ldo_vmch {
regulator-compatible = "ldo_vmch";
regulator-name = "vmch";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vemc_3v3_reg: ldo_vemc3v3 {
regulator-compatible = "ldo_vemc3v3";
regulator-name = "vemc_3v3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp1_reg: ldo_vgp1 {
regulator-compatible = "ldo_vgp1";
regulator-name = "vcamd";
regulator-min-microvolt = <1220000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <240>;
};
mt6397_vgp2_reg: ldo_vgp2 {
egulator-compatible = "ldo_vgp2";
regulator-name = "vcamio";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp3_reg: ldo_vgp3 {
regulator-compatible = "ldo_vgp3";
regulator-name = "vcamaf";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp4_reg: ldo_vgp4 {
regulator-compatible = "ldo_vgp4";
regulator-name = "vgp4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp5_reg: ldo_vgp5 {
regulator-compatible = "ldo_vgp5";
regulator-name = "vgp5";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vgp6_reg: ldo_vgp6 {
regulator-compatible = "ldo_vgp6";
regulator-name = "vgp6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
mt6397_vibr_reg: ldo_vibr {
regulator-compatible = "ldo_vibr";
regulator-name = "vibr";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
};
};
PFUZE100 family of regulators
Required properties:
- compatible: "fsl,pfuze100" or "fsl,pfuze200"
- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
- reg: I2C slave address
Required child node:
......@@ -14,6 +14,8 @@ Required child node:
sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
--PFUZE200
sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
--PFUZE3000
sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
Each regulator is defined using the standard binding for regulators.
......@@ -205,3 +207,93 @@ Example 2: PFUZE200
};
};
};
Example 3: PFUZE3000
pmic: pfuze3000@08 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
regulators {
sw1a_reg: sw1a {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
/* use sw1c_reg to align with pfuze100/pfuze200 */
sw1c_reg: sw1b {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1650000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen2_reg: vldo2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vccsd {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: v33 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
};
vgen5_reg: vldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
......@@ -441,6 +441,15 @@ config REGULATOR_MC13892
Say y here to support the regulators found on the Freescale MC13892
PMIC.
config REGULATOR_MT6397
tristate "MediaTek MT6397 PMIC"
depends on MFD_MT6397
help
Say y here to select this option to enable the power regulator of
MediaTek MT6397 PMIC.
This driver supports the control of different power rails of device
through regulator interface.
config REGULATOR_PALMAS
tristate "TI Palmas PMIC Regulators"
depends on MFD_PALMAS
......
......@@ -59,6 +59,7 @@ obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
......
......@@ -634,23 +634,32 @@ static DEVICE_ATTR(bypass, 0444,
/* Calculate the new optimum regulator operating mode based on the new total
* consumer load. All locks held by caller */
static void drms_uA_update(struct regulator_dev *rdev)
static int drms_uA_update(struct regulator_dev *rdev)
{
struct regulator *sibling;
int current_uA = 0, output_uV, input_uV, err;
unsigned int mode;
/*
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
*/
err = regulator_check_drms(rdev);
if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
(!rdev->desc->ops->get_voltage &&
!rdev->desc->ops->get_voltage_sel) ||
!rdev->desc->ops->set_mode)
return;
if (err < 0)
return 0;
if (!rdev->desc->ops->get_optimum_mode)
return 0;
if (!rdev->desc->ops->set_mode)
return -EINVAL;
/* get output voltage */
output_uV = _regulator_get_voltage(rdev);
if (output_uV <= 0)
return;
if (output_uV <= 0) {
rdev_err(rdev, "invalid output voltage found\n");
return -EINVAL;
}
/* get input voltage */
input_uV = 0;
......@@ -658,8 +667,10 @@ static void drms_uA_update(struct regulator_dev *rdev)
input_uV = regulator_get_voltage(rdev->supply);
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0)
return;
if (input_uV <= 0) {
rdev_err(rdev, "invalid input voltage found\n");
return -EINVAL;
}
/* calc total requested load */
list_for_each_entry(sibling, &rdev->consumer_list, list)
......@@ -671,8 +682,17 @@ static void drms_uA_update(struct regulator_dev *rdev)
/* check the new mode is allowed */
err = regulator_mode_constrain(rdev, &mode);
if (err == 0)
rdev->desc->ops->set_mode(rdev, mode);
if (err < 0) {
rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
current_uA, input_uV, output_uV);
return err;
}
err = rdev->desc->ops->set_mode(rdev, mode);
if (err < 0)
rdev_err(rdev, "failed to set optimum mode %x\n", mode);
return err;
}
static int suspend_set_state(struct regulator_dev *rdev,
......@@ -3002,75 +3022,13 @@ EXPORT_SYMBOL_GPL(regulator_get_mode);
int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
{
struct regulator_dev *rdev = regulator->rdev;
struct regulator *consumer;
int ret, output_uV, input_uV = 0, total_uA_load = 0;
unsigned int mode;
if (rdev->supply)
input_uV = regulator_get_voltage(rdev->supply);
int ret;
mutex_lock(&rdev->mutex);
/*
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
*/
regulator->uA_load = uA_load;
ret = regulator_check_drms(rdev);
if (ret < 0) {
ret = 0;
goto out;
}
if (!rdev->desc->ops->get_optimum_mode)
goto out;
/*
* we can actually do this so any errors are indicators of
* potential real failure.
*/
ret = -EINVAL;
if (!rdev->desc->ops->set_mode)
goto out;
/* get output voltage */
output_uV = _regulator_get_voltage(rdev);
if (output_uV <= 0) {
rdev_err(rdev, "invalid output voltage found\n");
goto out;
}
/* No supply? Use constraint voltage */
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
rdev_err(rdev, "invalid input voltage found\n");
goto out;
}
/* calc total requested load for this regulator */
list_for_each_entry(consumer, &rdev->consumer_list, list)
total_uA_load += consumer->uA_load;
mode = rdev->desc->ops->get_optimum_mode(rdev,
input_uV, output_uV,
total_uA_load);
ret = regulator_mode_constrain(rdev, &mode);
if (ret < 0) {
rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
total_uA_load, input_uV, output_uV);
goto out;
}
ret = rdev->desc->ops->set_mode(rdev, mode);
if (ret < 0) {
rdev_err(rdev, "failed to set optimum mode %x\n", mode);
goto out;
}
ret = mode;
out:
ret = drms_uA_update(rdev);
mutex_unlock(&rdev->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
......
......@@ -115,7 +115,7 @@ static unsigned int max8649_get_mode(struct regulator_dev *rdev)
return REGULATOR_MODE_NORMAL;
}
static struct regulator_ops max8649_dcdc_ops = {
static const struct regulator_ops max8649_dcdc_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
......@@ -143,7 +143,7 @@ static struct regulator_desc dcdc_desc = {
.enable_is_inverted = true,
};
static struct regmap_config max8649_regmap_config = {
static const struct regmap_config max8649_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
......
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Flora Fu <flora.fu@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6397/registers.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/mt6397-regulator.h>
#include <linux/regulator/of_regulator.h>
/*
* MT6397 regulators' information
*
* @desc: standard fields of regulator description.
* @qi: Mask for query enable signal status of regulators
* @vselon_reg: Register sections for hardware control mode of bucks
* @vselctrl_reg: Register for controlling the buck control mode.
* @vselctrl_mask: Mask for query buck's voltage control mode.
*/
struct mt6397_regulator_info {
struct regulator_desc desc;
u32 qi;
u32 vselon_reg;
u32 vselctrl_reg;
u32 vselctrl_mask;
};
#define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
vosel, vosel_mask, voselon, vosel_ctrl) \
[MT6397_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(match), \
.ops = &mt6397_volt_range_ops, \
.type = REGULATOR_VOLTAGE, \
.id = MT6397_ID_##vreg, \
.owner = THIS_MODULE, \
.n_voltages = (max - min)/step + 1, \
.linear_ranges = volt_ranges, \
.n_linear_ranges = ARRAY_SIZE(volt_ranges), \
.vsel_reg = vosel, \
.vsel_mask = vosel_mask, \
.enable_reg = enreg, \
.enable_mask = BIT(0), \
}, \
.qi = BIT(13), \
.vselon_reg = voselon, \
.vselctrl_reg = vosel_ctrl, \
.vselctrl_mask = BIT(1), \
}
#define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
vosel_mask) \
[MT6397_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(match), \
.ops = &mt6397_volt_table_ops, \
.type = REGULATOR_VOLTAGE, \
.id = MT6397_ID_##vreg, \
.owner = THIS_MODULE, \
.n_voltages = ARRAY_SIZE(ldo_volt_table), \
.volt_table = ldo_volt_table, \
.vsel_reg = vosel, \
.vsel_mask = vosel_mask, \
.enable_reg = enreg, \
.enable_mask = BIT(enbit), \
}, \
.qi = BIT(15), \
}
#define MT6397_REG_FIXED(match, vreg, enreg, enbit, volt) \
[MT6397_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(match), \
.ops = &mt6397_volt_fixed_ops, \
.type = REGULATOR_VOLTAGE, \
.id = MT6397_ID_##vreg, \
.owner = THIS_MODULE, \
.n_voltages = 1, \
.enable_reg = enreg, \
.enable_mask = BIT(enbit), \
.min_uV = volt, \
}, \
.qi = BIT(15), \
}
static const struct regulator_linear_range buck_volt_range1[] = {
REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
};
static const struct regulator_linear_range buck_volt_range2[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250),
};
static const struct regulator_linear_range buck_volt_range3[] = {
REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000),
};
static const u32 ldo_volt_table1[] = {
1500000, 1800000, 2500000, 2800000,
};
static const u32 ldo_volt_table2[] = {
1800000, 3300000,
};
static const u32 ldo_volt_table3[] = {
3000000, 3300000,
};
static const u32 ldo_volt_table4[] = {
1220000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000,
};
static const u32 ldo_volt_table5[] = {
1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000,
};
static const u32 ldo_volt_table5_v2[] = {
1200000, 1000000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000,
};
static const u32 ldo_volt_table6[] = {
1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000,
};
static const u32 ldo_volt_table7[] = {
1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000,
};
static int mt6397_get_status(struct regulator_dev *rdev)
{
int ret;
u32 regval;
struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
ret = regmap_read(rdev->regmap, info->desc.enable_reg, &regval);
if (ret != 0) {
dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
return ret;
}
return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
}
static struct regulator_ops mt6397_volt_range_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.get_status = mt6397_get_status,
};
static struct regulator_ops mt6397_volt_table_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_iterate,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.get_status = mt6397_get_status,
};
static struct regulator_ops mt6397_volt_fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.get_status = mt6397_get_status,
};
/* The array is indexed by id(MT6397_ID_XXX) */
static struct mt6397_regulator_info mt6397_regulators[] = {
MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f,
MT6397_VCA15_CON10, MT6397_VCA15_CON5),
MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f,
MT6397_VPCA7_CON10, MT6397_VPCA7_CON5),
MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9,
0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5),
MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9,
0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5),
MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f,
MT6397_VCORE_CON10, MT6397_VCORE_CON5),
MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1,
MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f,
MT6397_VGPU_CON10, MT6397_VGPU_CON5),
MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2,
MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f,
MT6397_VDRM_CON10, MT6397_VDRM_CON5),
MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000,
buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f,
MT6397_VIO18_CON10, MT6397_VIO18_CON5),
MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000),
MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000),
MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1,
MT6397_ANALDO_CON2, 15, MT6397_ANALDO_CON6, 0xC0),
MT6397_REG_FIXED("ldo_vio28", VIO28, MT6397_DIGLDO_CON0, 14, 2800000),
MT6397_REG_FIXED("ldo_vusb", VUSB, MT6397_DIGLDO_CON1, 14, 3300000),
MT6397_LDO("ldo_vmc", VMC, ldo_volt_table2,
MT6397_DIGLDO_CON2, 12, MT6397_DIGLDO_CON29, 0x10),
MT6397_LDO("ldo_vmch", VMCH, ldo_volt_table3,
MT6397_DIGLDO_CON3, 14, MT6397_DIGLDO_CON17, 0x80),
MT6397_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table3,
MT6397_DIGLDO_CON4, 14, MT6397_DIGLDO_CON18, 0x10),
MT6397_LDO("ldo_vgp1", VGP1, ldo_volt_table4,
MT6397_DIGLDO_CON5, 15, MT6397_DIGLDO_CON19, 0xE0),
MT6397_LDO("ldo_vgp2", VGP2, ldo_volt_table5,
MT6397_DIGLDO_CON6, 15, MT6397_DIGLDO_CON20, 0xE0),
MT6397_LDO("ldo_vgp3", VGP3, ldo_volt_table5,
MT6397_DIGLDO_CON7, 15, MT6397_DIGLDO_CON21, 0xE0),
MT6397_LDO("ldo_vgp4", VGP4, ldo_volt_table5,
MT6397_DIGLDO_CON8, 15, MT6397_DIGLDO_CON22, 0xE0),
MT6397_LDO("ldo_vgp5", VGP5, ldo_volt_table6,
MT6397_DIGLDO_CON9, 15, MT6397_DIGLDO_CON23, 0xE0),
MT6397_LDO("ldo_vgp6", VGP6, ldo_volt_table5,
MT6397_DIGLDO_CON10, 15, MT6397_DIGLDO_CON33, 0xE0),
MT6397_LDO("ldo_vibr", VIBR, ldo_volt_table7,
MT6397_DIGLDO_CON24, 15, MT6397_DIGLDO_CON25, 0xE00),
};
static int mt6397_set_buck_vosel_reg(struct platform_device *pdev)
{
struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
int i;
u32 regval;
for (i = 0; i < MT6397_MAX_REGULATOR; i++) {
if (mt6397_regulators[i].vselctrl_reg) {
if (regmap_read(mt6397->regmap,
mt6397_regulators[i].vselctrl_reg,
&regval) < 0) {
dev_err(&pdev->dev,
"Failed to read buck ctrl\n");
return -EIO;
}
if (regval & mt6397_regulators[i].vselctrl_mask) {
mt6397_regulators[i].desc.vsel_reg =
mt6397_regulators[i].vselon_reg;
}
}
}
return 0;
}
static int mt6397_regulator_probe(struct platform_device *pdev)
{
struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = {};
struct regulator_dev *rdev;
int i;
u32 reg_value, version;
/* Query buck controller to select activated voltage register part */
if (mt6397_set_buck_vosel_reg(pdev))
return -EIO;
/* Read PMIC chip revision to update constraints and voltage table */
if (regmap_read(mt6397->regmap, MT6397_CID, &reg_value) < 0) {
dev_err(&pdev->dev, "Failed to read Chip ID\n");
return -EIO;
}
dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
version = (reg_value & 0xFF);
switch (version) {
case MT6397_REGULATOR_ID91:
mt6397_regulators[MT6397_ID_VGP2].desc.volt_table =
ldo_volt_table5_v2;
break;
default:
break;
}
for (i = 0; i < MT6397_MAX_REGULATOR; i++) {
config.dev = &pdev->dev;
config.driver_data = &mt6397_regulators[i];
config.regmap = mt6397->regmap;
rdev = devm_regulator_register(&pdev->dev,
&mt6397_regulators[i].desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s\n",
mt6397_regulators[i].desc.name);
return PTR_ERR(rdev);
}
}
return 0;
}
static struct platform_driver mt6397_regulator_driver = {
.driver = {
.name = "mt6397-regulator",
},
.probe = mt6397_regulator_probe,
};
module_platform_driver(mt6397_regulator_driver);
MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mt6397-regulator");
......@@ -56,7 +56,7 @@
#define PFUZE100_VGEN5VOL 0x70
#define PFUZE100_VGEN6VOL 0x71
enum chips { PFUZE100, PFUZE200 };
enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
struct pfuze_regulator {
struct regulator_desc desc;
......@@ -80,9 +80,18 @@ static const int pfuze100_vsnvs[] = {
1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
};
static const int pfuze3000_sw2lo[] = {
1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000,
};
static const int pfuze3000_sw2hi[] = {
2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000,
};
static const struct i2c_device_id pfuze_device_id[] = {
{.name = "pfuze100", .driver_data = PFUZE100},
{.name = "pfuze200", .driver_data = PFUZE200},
{.name = "pfuze3000", .driver_data = PFUZE3000},
{ }
};
MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
......@@ -90,6 +99,7 @@ MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
static const struct of_device_id pfuze_dt_ids[] = {
{ .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
{ .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
{ .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000},
{ }
};
MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
......@@ -219,6 +229,60 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
.stby_mask = 0x20, \
}
#define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \
.desc = { \
.name = #_name, \
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_ldo_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base), \
.vsel_mask = 0x3, \
.enable_reg = (base), \
.enable_mask = 0x10, \
}, \
.stby_reg = (base), \
.stby_mask = 0x20, \
}
#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \
.desc = { \
.name = #_name,\
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_sw_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0x7, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0x7, \
}
#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \
.desc = { \
.name = #_name,\
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_sw_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0xf, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0xf, \
}
/* PFUZE100 */
static struct pfuze_regulator pfuze100_regulators[] = {
PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
......@@ -254,6 +318,22 @@ static struct pfuze_regulator pfuze200_regulators[] = {
PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
static struct pfuze_regulator pfuze3000_regulators[] = {
PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000),
PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000),
PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst),
PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
static struct pfuze_regulator *pfuze_regulators;
#ifdef CONFIG_OF
......@@ -294,6 +374,24 @@ static struct of_regulator_match pfuze200_matches[] = {
{ .name = "vgen6", },
};
/* PFUZE3000 */
static struct of_regulator_match pfuze3000_matches[] = {
{ .name = "sw1a", },
{ .name = "sw1b", },
{ .name = "sw2", },
{ .name = "sw3", },
{ .name = "swbst", },
{ .name = "vsnvs", },
{ .name = "vrefddr", },
{ .name = "vldo1", },
{ .name = "vldo2", },
{ .name = "vccsd", },
{ .name = "v33", },
{ .name = "vldo3", },
{ .name = "vldo4", },
};
static struct of_regulator_match *pfuze_matches;
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
......@@ -313,6 +411,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
}
switch (chip->chip_id) {
case PFUZE3000:
pfuze_matches = pfuze3000_matches;
ret = of_regulator_match(dev, parent, pfuze3000_matches,
ARRAY_SIZE(pfuze3000_matches));
break;
case PFUZE200:
pfuze_matches = pfuze200_matches;
ret = of_regulator_match(dev, parent, pfuze200_matches,
......@@ -378,7 +481,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
* as ID=8 in PFUZE100
*/
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
} else if ((value & 0x0f) != pfuze_chip->chip_id) {
} else if ((value & 0x0f) != pfuze_chip->chip_id &&
(value & 0xf0) >> 4 != pfuze_chip->chip_id) {
/* device id NOT match with your setting */
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
......@@ -417,7 +521,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
int i, ret;
const struct of_device_id *match;
u32 regulator_num;
u32 sw_check_start, sw_check_end;
u32 sw_check_start, sw_check_end, sw_hi = 0x40;
pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
GFP_KERNEL);
......@@ -458,13 +562,19 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
/* use the right regulators after identify the right device */
switch (pfuze_chip->chip_id) {
case PFUZE3000:
pfuze_regulators = pfuze3000_regulators;
regulator_num = ARRAY_SIZE(pfuze3000_regulators);
sw_check_start = PFUZE3000_SW2;
sw_check_end = PFUZE3000_SW2;
sw_hi = 1 << 3;
break;
case PFUZE200:
pfuze_regulators = pfuze200_regulators;
regulator_num = ARRAY_SIZE(pfuze200_regulators);
sw_check_start = PFUZE200_SW2;
sw_check_end = PFUZE200_SW3B;
break;
case PFUZE100:
default:
pfuze_regulators = pfuze100_regulators;
......@@ -474,7 +584,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
break;
}
dev_info(&client->dev, "pfuze%s found.\n",
(pfuze_chip->chip_id == PFUZE100) ? "100" : "200");
(pfuze_chip->chip_id == PFUZE100) ? "100" :
((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
memcpy(pfuze_chip->regulator_descs, pfuze_regulators,
sizeof(pfuze_chip->regulator_descs));
......@@ -498,12 +609,17 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
/* SW2~SW4 high bit check and modify the voltage value table */
if (i >= sw_check_start && i <= sw_check_end) {
regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
if (val & 0x40) {
if (val & sw_hi) {
if (pfuze_chip->chip_id == PFUZE3000) {
desc->volt_table = pfuze3000_sw2hi;
desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi);
} else {
desc->min_uV = 800000;
desc->uV_step = 50000;
desc->n_voltages = 51;
}
}
}
config.dev = &client->dev;
config.init_data = init_data;
......
......@@ -674,6 +674,7 @@ static int rpm_reg_probe(struct platform_device *pdev)
vreg->desc.owner = THIS_MODULE;
vreg->desc.type = REGULATOR_VOLTAGE;
vreg->desc.name = pdev->dev.of_node->name;
vreg->desc.supply_name = "vin";
vreg->rpm = dev_get_drvdata(pdev->dev.parent);
if (!vreg->rpm) {
......
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Flora Fu <flora.fu@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __LINUX_REGULATOR_MT6397_H
#define __LINUX_REGULATOR_MT6397_H
enum {
MT6397_ID_VPCA15 = 0,
MT6397_ID_VPCA7,
MT6397_ID_VSRAMCA15,
MT6397_ID_VSRAMCA7,
MT6397_ID_VCORE,
MT6397_ID_VGPU,
MT6397_ID_VDRM,
MT6397_ID_VIO18 = 7,
MT6397_ID_VTCXO,
MT6397_ID_VA28,
MT6397_ID_VCAMA,
MT6397_ID_VIO28,
MT6397_ID_VUSB,
MT6397_ID_VMC,
MT6397_ID_VMCH,
MT6397_ID_VEMC3V3,
MT6397_ID_VGP1,
MT6397_ID_VGP2,
MT6397_ID_VGP3,
MT6397_ID_VGP4,
MT6397_ID_VGP5,
MT6397_ID_VGP6,
MT6397_ID_VIBR,
MT6397_ID_RG_MAX,
};
#define MT6397_MAX_REGULATOR MT6397_ID_RG_MAX
#define MT6397_REGULATOR_ID97 0x97
#define MT6397_REGULATOR_ID91 0x91
#endif /* __LINUX_REGULATOR_MT6397_H */
......@@ -49,6 +49,20 @@
#define PFUZE200_VGEN5 11
#define PFUZE200_VGEN6 12
#define PFUZE3000_SW1A 0
#define PFUZE3000_SW1B 1
#define PFUZE3000_SW2 2
#define PFUZE3000_SW3 3
#define PFUZE3000_SWBST 4
#define PFUZE3000_VSNVS 5
#define PFUZE3000_VREFDDR 6
#define PFUZE3000_VLDO1 7
#define PFUZE3000_VLDO2 8
#define PFUZE3000_VCCSD 9
#define PFUZE3000_V33 10
#define PFUZE3000_VLDO3 11
#define PFUZE3000_VLDO4 12
struct regulator_init_data;
struct pfuze_regulator_platform_data {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment