scsi: ips: Remove some set but unused variables

Intentionally keeping all register reads/writes.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ips.c: In function ‘ips_init_copperhead’:
 drivers/scsi/ips.c:4700:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
 4700 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 | ^~~~~~~~~~
 drivers/scsi/ips.c: In function ‘ips_init_copperhead_memio’:
 drivers/scsi/ips.c:4794:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
 4794 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 | ^~~~~~~~~~
 drivers/scsi/ips.c: In function ‘ips_init_phase1’:
 drivers/scsi/ips.c:6839:10: warning: variable ‘func’ set but not used [-Wunused-but-set-variable]
 6839 | uint8_t func;
 | ^~~~
 drivers/scsi/ips.c:6838:10: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable]
 6838 | uint8_t bus;
 | ^~~

Link: https://lore.kernel.org/r/20200723122446.1329773-13-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: ipslinux@adaptec.com
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/ips.c

@@ -4697,7 +4697,6 @@ ips_init_copperhead(ips_ha_t * ha)
 	uint8_t Isr;
 	uint8_t Cbsp;
 	uint8_t PostByte[IPS_MAX_POST_BYTES];
-	uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 	int i, j;
 
 	METHOD_TRACE("ips_init_copperhead", 1);
@@ -4742,7 +4741,7 @@ ips_init_copperhead(ips_ha_t * ha)
 			/* error occurred */
 			return (0);
 
-		ConfigByte[i] = inb(ha->io_addr + IPS_REG_ISPR);
+		inb(ha->io_addr + IPS_REG_ISPR);
 		outb(Isr, ha->io_addr + IPS_REG_HISR);
 	}
 
@@ -4791,7 +4790,6 @@ ips_init_copperhead_memio(ips_ha_t * ha)
 	uint8_t Isr = 0;
 	uint8_t Cbsp;
 	uint8_t PostByte[IPS_MAX_POST_BYTES];
-	uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 	int i, j;
 
 	METHOD_TRACE("ips_init_copperhead_memio", 1);
@@ -4836,7 +4834,7 @@ ips_init_copperhead_memio(ips_ha_t * ha)
 			/* error occurred */
 			return (0);
 
-		ConfigByte[i] = readb(ha->mem_ptr + IPS_REG_ISPR);
+		readb(ha->mem_ptr + IPS_REG_ISPR);
 		writeb(Isr, ha->mem_ptr + IPS_REG_HISR);
 	}
 
@@ -6835,8 +6833,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
 	uint32_t mem_addr;
 	uint32_t io_len;
 	uint32_t mem_len;
-	uint8_t bus;
-	uint8_t func;
 	int j;
 	int index;
 	dma_addr_t dma_address;
@@ -6856,10 +6852,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
 	if (index >= IPS_MAX_ADAPTERS)
 		return -1;
 
-	/* stuff that we get in dev */
-	bus = pci_dev->bus->number;
-	func = pci_dev->devfn;
-
 	/* Init MEM/IO addresses to 0 */
 	mem_addr = 0;
 	io_addr = 0;