ARM: 8014/1: mm: fix reporting of read-only PMD bits

On non-LPAE ARMv6+, read-only PMD bits are defined with the combination
"PMD_SECT_APX | PMD_SECT_AP_WRITE". Adjusted the bit masks to correctly
report this.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mm/dump.c

@@ -120,7 +120,34 @@ static const struct prot_bits pte_bits[] = {
 };
 
 static const struct prot_bits section_bits[] = {
-#ifndef CONFIG_ARM_LPAE
+#ifdef CONFIG_ARM_LPAE
+	{
+		.mask	= PMD_SECT_USER,
+		.val	= PMD_SECT_USER,
+		.set	= "USR",
+	}, {
+		.mask	= PMD_SECT_RDONLY,
+		.val	= PMD_SECT_RDONLY,
+		.set	= "ro",
+		.clear	= "RW",
+#elif __LINUX_ARM_ARCH__ >= 6
+	{
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_APX | PMD_SECT_AP_WRITE,
+		.set	= "    ro",
+	}, {
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_AP_WRITE,
+		.set	= "    RW",
+	}, {
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_AP_READ,
+		.set	= "USR ro",
+	}, {
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.set	= "USR RW",
+#else /* ARMv4/ARMv5  */
 	/* These are approximate */
 	{
 		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
@@ -138,16 +165,6 @@ static const struct prot_bits section_bits[] = {
 		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val    = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.set    = "USR RW",
-#else
-	{
-		.mask	= PMD_SECT_USER,
-		.val	= PMD_SECT_USER,
-		.set	= "USR",
-	}, {
-		.mask	= PMD_SECT_RDONLY,
-		.val	= PMD_SECT_RDONLY,
-		.set	= "ro",
-		.clear	= "RW",
 #endif
 	}, {
 		.mask	= PMD_SECT_XN,