Trying to do both SCSI and NVMe bio-based handling with branching in the
same common code has proven too tedious on a code maintenance level.  In
addition it slightly hurts IO performance.

Fix this by factoring out __map_bio() and __map_bio_nvme().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

All code that deals with pg_init is not used with bio-based NVMe mode.
This includes skipping initialization of pg_init related variables.

Also, pg_init related members on 'struct multipath' have been grouped
together.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This DM multipath NVMe bio-based support requires CONFIG_NVME_MULTIPATH
to not be set.  In the future hopefully NVMe multipath and DM multipath
can co-exist more seemlessly.  But as is, if CONFIG_NVME_MULTIPATH=Y
then all the individal NVMe paths will remain hidden to upper layers and
as such DM multipath will not be able to manage them.

Though NVMe's native multipathing doesn't multipath namespaces across
subsystems; so technically a user _could_ use CONFIG_NVME_MULTIPATH=Y
and also use DM multipath to multipath across subsystems.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Moving the dm_bio_restore() to process_queued_bios() avoids doing that
work in multipath_end_io_bio().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

All underlying members are initialized directly so the memset() calls
are not needed.  Also, initialize mpio->nr_bytes from the start since it
never changes.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

'struct dm_bio_details *' isn't ever needed.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Upper level bio-based drivers that stack immediately ontop of NVMe can
leverage direct_make_request().  In addition DM's NVMe bio-based
will initially only ever have one NVMe device that it submits IO to at a
time.  There is no splitting needed.  Enhance DM core so that
DM_TYPE_NVME_BIO_BASED's IO submission takes advantage of both of these
characteristics.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

If dm_table_determine_type() establishes DM_TYPE_NVME_BIO_BASED then
all devices in the DM table do not support partial completions.  Also,
the table has a single immutable target that doesn't require DM core to
split bios.

This will enable adding NVMe optimizations to bio-based DM.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

No apparent need to generic_start_io_acct() until before the IO is ready
for submission.  start_io_acct() is the proper place to do this
accounting -- it is also where DM accounts for pending IO and, if
enabled, starts dm-stats accounting.

Replace start_io_acct()'s part_round_stats() with generic_start_io_acct().
This eliminates needing to take part_stat_lock() multiple times when
starting an IO on bio-based devices.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

'struct dm_io' already has the same pointer.  So update all accesses
from ci->md to ci->io->md.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Eliminates need for a separate mempool to allocate 'struct dm_io'
objects from.  As such, it saves an extra mempool allocation for each
original bio that DM core is issued.

This complicates the per-bio-data accessor functions by needing to
conditonally add extra padding to get to a target's per-bio-data.  But
in the end this provides a decent performance improvement for all
bio-based DM devices.

On an NVMe-loop based testbed to a ramdisk (~3100 MB/s): bio-based
DM linear performance improved by 2% (went from 2665 to 2777 MB/s).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

These CRUD comments have worn out their welcome.  The code is what it
is, over time it'll hopefully get better.  But these comments serve no
purpose whatsoever.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Rather than having DAX support be unique by setting it based on table
type in dm_setup_md_queue().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

__send_changing_extent_only() must follow the same pattern that was
established with commit "dm: ensure bio submission follows a depth-first
tree walk".  That is: submit first bio up to split boundary and then
split the remainder to further submissions.
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

alloc_multiple_bios() assumes it can allocate the requested number of
bios but until now there was no gaurantee that the mempools would be
accomodating.
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Now that all of DM has been revised and/or verified to no longer require
the use of BIOSET_NEED_RESCUER the dm_offload code may be removed.
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

DM targets can request multiple bios be sent to them by DM core (see:
num_{flush,discard,write_same,write_zeroes}_bios).  But until now these
bios were allocated in an unsafe manner than could potentially exhaust
the DM device's bioset -- in the face of multiple threads each trying to
do multiple allocations from the same DM device's bioset.

Fix __send_duplicate_bios() by using the new alloc_multiple_bios().  The
allocation strategy used by alloc_multiple_bios() models that used by
dm-crypt.c:crypt_alloc_buffer().

Neil Brown initially proposed this fix but the implementation has been
revised enough that it inappropriate to attribute the entirety of it to
him.
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

No DM target provides num_write_bios and none has since dm-cache's
brief use in 2013.

Having the possibility of num_write_bios > 1 complicates bio
allocation.  So remove the interface and assume there is only one bio
needed.

If a target ever needs more, it must provide a suitable bioset and
allocate itself based on its particular needs.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

A dm device can, in general, represent a tree of targets, each of which
handles a sub-range of the range of blocks handled by the parent.

The bio sequencing managed by generic_make_request() requires that bios
are generated and handled in a depth-first manner.  Each call to a
make_request_fn() may submit bios to a single member device, and may
submit bios for a reduced region of the same device as the
make_request_fn.

In particular, any bios submitted to member devices must be expected to
be processed in order, so a later one must never wait for an earlier
one.

This ordering is usually achieved by using bio_split() to reduce a bio
to a size that can be completely handled by one target, and resubmitting
the remainder to the originating device. bio_queue_split() shows the
canonical approach.

dm doesn't follow this approach, largely because it has needed to split
bios since long before bio_split() was available.  It currently can
submit bios to separate targets within the one dm_make_request() call.
Dependencies between these targets, as can happen with dm-snap, can
cause deadlocks if either bios gets stuck behind the other in the queues
managed by generic_make_request().  This requires the 'rescue'
functionality provided by dm_offload_{start,end}.

Some of this requirement can be removed by changing the order of bio
submission to follow the canonical approach.  That is, if dm finds that
it needs to split a bio, the remainder should be sent to
generic_make_request() rather than being handled immediately.  This
delays the handling until the first part is completely processed, so the
deadlock problems do not occur.

__split_and_process_bio() can be called both from dm_make_request() and
from dm_wq_work().  When called from dm_wq_work() the current approach
is perfectly satisfactory as each bio will be processed immediately.
When called from dm_make_request(), current->bio_list will be non-NULL,
and in this case it is best to create a separate "clone" bio for the
remainder.

When we use bio_clone_bioset() to split off the front part of a bio
and chain the two together and submit the remainder to
generic_make_request(), it is important that the newly allocated
bio is used as the head to be processed immediately, and the original
bio gets "bio_advance()"d and sent to generic_make_request() as the
remainder.  Otherwise, if the newly allocated bio is used as the
remainder, and if it then needs to be split again, then the next
bio_clone_bioset() call will be made while holding a reference a bio
(result of the first clone) from the same bioset.  This can potentially
exhaust the bioset mempool and result in a memory allocation deadlock.

Note that there is no race caused by reassigning cio.io->bio after already
calling __map_bio().  This bio will only be dereferenced again after
dec_pending() has found io->io_count to be zero, and this cannot happen
before the dec_pending() call at the end of __split_and_process_bio().

To provide the clone bio when splitting, we use q->bio_split.  This
was previously being freed by bio-based dm to avoid having excess
rescuer threads.  As bio_split bio sets no longer create rescuer
threads, there is little cost and much gain from restoring the
q->bio_split bio set.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The BIOSET_NEED_RESCUER flag is only needed when a make_request_fn might
do two allocations from the one bioset, and the second one could block
until the first bio completes.

dm_io() is called from make_request_fn() context.  The closest it comes
to multiple allocations is in chunk_io() in dm-snap-persistent.  But
there the code uses a separate thread to avoid problems.

So BIOSET_NEED_RESCUER is not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The BIOSET_NEED_RESCUER flag is only needed when a make_request_fn might
do two allocations from the one bioset, and the second one could block
until the first bio completes.

dm-crypt does allocate from this bioset inside the dm make_request_fn,
but does so using GFP_NOWAIT so that the allocation will not block.

So BIOSET_NEED_RESCUER is not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Clarify that dm_accept_partial_bio isn't allowed for REQ_OP_ZONE_RESET
bios.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Cleanup, no functional change.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

No need to calculate the reshaping progress because
mddev->curr_resync_completed holds it.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

During reshape, 'A' chars were reported in status rather than 'a'.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

In order to avoid redoing synchronization/recovery/reshape partially,
the raid set got frozen until after all passed in table line flags had
been cleared.  The related table reload sequence had to be precisely
followed, or reshaping may lead to data corruption caused by the active
mapping carrying on with a reshape when the inactive mapping already
had retrieved a stale reshape position.

Harden by retrieving the actual resync/recovery/reshape position
during resume whilst the active table is suspended thus avoiding
to keep the raid set frozen altogether.  This prevents superfluous
redoing of an already resynchronized or recovered segment and,
most importantly, potential for redoing of an already reshaped
segment causing data corruption.

Fixes: d39f0010 ("dm raid: fix raid_resume() to keep raid set frozen as needed")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Verifying the current raid sets redundancy based on retrieved
superblock content has to use the superblock's raid level (e.g. raid0),
not the constructor requested one (e.g. raid10).

Using the requested raid level of raid10 lead to a "divide error"
on raid0 which defines data copies divided by to be zero.

Also check for bogus data copies.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Also update Documentation accordingly.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Move raid_resume()'s setting of 'rw' and 'in_sync' to just prior to
mddev_resume().

Also, remove unused 'bitmap_loaded' member from "struct raid_set".

No functional changes.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Fix various sync state issues causing racy/bogus sync ratio,
sync_action ad health chars in dm_status() info output.

Sync ratio could be N/N (i.e. 100%) shortly after raid set
creation, i.e. creating a new RaidLV or upconverting a linear LV to
raid1 thus:
  "0 2097152 raid raid1 2 Aa 2097162/2097152 recover 0 0 -"
instead of:
  "0 2097152 raid raid1 2 Aa 0/2097152 idle 0 0 -"

Sync action could be non-idle, when the MD thread was done with io.

Health chars could be 'A' when they should be 'a' for a short time
before a resynchonization started.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The raid_status() function passes the bool array_in_sync variable around
providing synchronization state of the MD array.  Replace it with a
runtime flag.  This will avoid a pattern of having to pass discrete
variables to various functions.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The MD sync thread updates recovery flags providing state of any
running, idle, frozen, recovering, reshaping, ... activity it performs
and updates respective flags asynchronously versus dm processing
raid_status().  To close that race window, take a single copy of the
flags and pass it into its callees.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

During a reshape request: if userspace reloads a "raid" table multiple
times, resulting in multiple superblock reads, the raid set needs to
stay frozen until all config changes (chunk size, layout data_offset,
delta_disks) have been stored in the superblocks and respective flags
cleared.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Check all component data device sizes versus calculated size.
Reject if device(s) are too small.  Otherwise, MD will fail the
operation by accessing beyond the end of the data device.

An example use-case is that growing bitmap won't fit any more and the MD
runtime will report an error when DM raid should catch this earlier.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The raid set size is being revalidated unconditionally before a
reshaping conversion is started.  MD requires the size to only be
reduced in case of a stripe removing (i.e. shrinking) reshape but not
when growing because the raid array has to stay small until after the
growing reshape finishes.

Fix by avoiding the size revalidation in preresume unless a shrinking
reshape is requested.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pay attention to existing reshape space to define if a raid set needs
resizing.  Otherwise we can hit "Can't resize a reshaping raid set"
when a reshape is being requested.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The md raid personalities call md_finish_reshape() at the end of a
reshape conversion which adjusts rdev->sectors.

Correct/check rdev->sectors before initiating a reshape and raise the
recovery pointer accordingly.

Otherwise, the DM raid coordinated reshape will fail.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>