- 23 Mar, 2007 31 commits
-
-
Dmitry Torokhov authored
Do not assume that AUX_LOOP command is broken unless it completes successfully but returns wrong (unexpected) data. Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Dike authored
x86_64 needs some TLS fixes. What was missing was remembering the child thread id during clone and stuffing it into the child during each context switch. The %fs value is stored separately in the thread structure since the host controls what effect it has on the actual register file. The host also needs to store it in its own thread struct, so we need the value kept outside the register file. arch_prctl_skas was fixed to call PTRACE_ARCH_PRCTL appropriately. There is some saving and restoring of registers in the ARCH_SET_* cases so that the correct set of registers are changed on the host and restored to the process when it runs again. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Al Viro authored
GFP_KERNEL allocations in non-blocking context; fixed by killing an idiotic use of security_getprocattr(). Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
James Morris <jmorris@namei.org> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dmitry Torokhov authored
Input: i8042 - fix AUX IRQ delivery check On boxes that do not implement AUX LOOP command we can not verify AUX IRQ delivery and must assume that it is wired properly. Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Zach Brown authored
This patch fixes a user-triggerable oops that was reported by Leonid Ananiev as archived at http://lkml.org/lkml/2007/2/8/337. dio writes invalidate clean pages that intersect the written region so that subsequent buffered reads go to disk to read the new data. If this fails the interface tries to tell the caller that the cache is inconsistent by returning EIO. Before this patch we had the problem where this invalidation failure would clobber -EIOCBQUEUED as it made its way from fs/direct-io.c to fs/aio.c. Both fs/aio.c and bio completion call aio_complete() and we reference freed memory, usually oopsing. This patch addresses this problem by invalidating before the write so that we can cleanly return -EIO before ->direct_IO() has had a chance to return -EIOCBQUEUED. There is a compromise here. During the dio write we can fault in mmap()ed pages which intersect the written range with get_user_pages() if the user provided them for the source buffer. This is a crazy thing to do, but we can make it mostly work in most cases by trying the invalidation again. The compromise is that we won't return an error if this second invalidation fails if it's an AIO write and we have -EIOCBQUEUED. This was tested by having two processes race performing large O_DIRECT and buffered ordered writes. Within minutes ext3 would see a race between ext3_releasepage() and jbd holding a reference on ordered data buffers and would cause invalidation to fail, panicing the box. The test can be found in the 'aio_dio_bugs' test group in test.kernel.org/autotest. After this patch the test passes. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Leonid Ananiev <leonid.i.ananiev@linux.intel.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ankita Garg authored
Looking at oom_kill.c, found that the intention to not kill the selected process if any of its children/siblings has OOM_DISABLE set, is not being met. Signed-off-by:
Ankita Garg <ankita@in.ibm.com> Cc: Chuck Ebbert <cebbert@redhat.com> Acked-by:
Nick Piggin <npiggin@suse.de> Acked-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
-
Takashi Iwai authored
[ALSA] hda-intel - Fix codec probe with ATI contorllers ATI controllers may have up to 4 codecs while ICH up to 3. Thus the earlier fix to change AZX_MAX_CODECS to 3 cause a regression on some devices that have the audio codec at bit#3. Now max codecs is defined according to the driver type, either 3 or 4. Currently 4 is set only to ATI chips. Other might need the same change, too. Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Dmitry Torokhov authored
Input: i8042 - really suppress ACK/NAK during panic blink On some boxes panic blink procedure manages to send both bytes to keyboard contoller before getting first ACK so we need to make i8042_suppress_kbd_ack a counter instead of boolean. Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Samuel Ortiz authored
Without this initialization one gets kernel BUG at kernel/rtmutex_common.h:80! This patch should also be included in the -stable kernel. Signed-off-by:
G. Liakhovetski <gl@dsa-ac.de> Signed-off-by:
Samuel Ortiz <samuel@sortiz.org> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
David Miller authored
[SPARC64]: Get DEBUG_PAGEALLOC working again. We have to make sure to use base-pagesize TLB entries even during the early transition period where we need TLB miss handling but don't have the kernel page tables setup yet for the linear region. Also, it is necessary therefore to not use the 4MB TSB for these translations, and instead use the normal kernel TSB. This allows us to also get rid of the 4MB tsb for debug builds which shrinks the kernel a little bit. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Miller authored
[SPARC64]: Add missing HPAGE_MASK masks on address parameters. These pte loops all assume the passed in address is HPAGE aligned, make sure that is actually true. Signed-off-by:
-
Alexey Dobriyan authored
[NET]: Copy mac_len in skb_clone() as well ANK says: "It is rarely used, that's wy it was not noticed. But in the places, where it is used, it should be disaster." Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
-
Masayuki Nakagawa authored
[IPV6]: ipv6_fl_socklist is inadvertently shared. The ipv6_fl_socklist from listening socket is inadvertently shared with new socket created for connection. This leads to a variety of interesting, but fatal, bugs. For example, removing one of the sockets may lead to the other socket's encountering a page fault when the now freed list is referenced. The fix is to not share the flow label list with the new socket. Signed-off-by:
Masayuki Nakagawa <nakagawa.msy@ncos.nec.co.jp> Signed-off-by:
-
Robert Olsson authored
[IPV4]: Do not disable preemption in trie_leaf_remove(). Hello, Just discussed this Patrick... We have two users of trie_leaf_remove, fn_trie_flush and fn_trie_delete both are holding RTNL. So there shouldn't be need for this preempt stuff. This is assumed to a leftover from an older RCU-take. > Mhh .. I think I just remembered something - me incorrectly suggesting > to add it there while we were talking about this at OLS :) IIRC the > idea was to make sure tnode_free (which at that time didn't use > call_rcu) wouldn't free memory while still in use in a rcu read-side > critical section. It should have been synchronize_rcu of course, > but with tnode_free using call_rcu it seems to be completely > unnecessary. So I guess we can simply remove it. Signed-off-by:
Robert Olsson <robert.olsson@its.uu.se> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Joy Latten authored
[XFRM]: Fix missing protocol comparison of larval SAs. I noticed that in xfrm_state_add we look for the larval SA in a few places without checking for protocol match. So when using both AH and ESP, whichever one gets added first, deletes the larval SA. It seems AH always gets added first and ESP is always the larval SA's protocol since the xfrm->tmpl has it first. Thus causing the additional km_query() Adding the check eliminates accidental double SA creation. Signed-off-by:
Joy Latten <latten@austin.ibm.com> Signed-off-by:
-
Francois Romieu authored
Initialize the timer with the rest of the private-struct. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andy Isaacson authored
When iterating through an array, one must be careful to test one's index variable rather than another similarly-named variable. The loop will read off the end of conf->disks[] in the following (pathological) case: % dd bs=1 seek=840716287 if=/dev/zero of=d1 count=1 % for i in 2 3 4; do dd if=/dev/zero of=d$i bs=1k count=$(($i+150)); done % ./vmlinux ubd0=root ubd1=d1 ubd2=d2 ubd3=d3 ubd4=d4 # mdadm -C /dev/md0 --level=linear --raid-devices=4 /dev/ubd[1234] adding some printks, I saw this: [42949374.960000] hash_spacing = 821120 [42949374.960000] cnt = 4 [42949374.960000] min_spacing = 801 [42949374.960000] j=0 size=820928 sz=820928 [42949374.960000] i=0 sz=820928 hash_spacing=820928 [42949374.960000] j=1 size=64 sz=64 [42949374.960000] j=2 size=64 sz=128 [42949374.960000] j=3 size=64 sz=192 [42949374.960000] j=4 size=1515870810 sz=1515871002 Cc: Gautham R Shenoy <ego@in.ibm.com> Acked-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Thomas Gleixner authored
The maximum seconds value we can handle on 32bit is LONG_MAX. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Thomas Gleixner authored
hrtimer_forward() does not check for the possible overflow of timer->expires. This can happen on 64 bit machines with large interval values and results currently in an endless loop in the softirq because the expiry value becomes negative and therefor the timer is expired all the time. Check for this condition and set the expiry value to the max. expiry time in the future. The fix should be applied to stable kernel series as well. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Trond Myklebust authored
Looks like we need a check in nfs_getattr() for a regular file. It makes no sense to call nfs_sync_mapping_range() on anything else. I think that should fix your problem: it will stop the NFS client from interfering with dirty pages on that inode's mapping. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Ingo Molnar authored
Testing of -rt by IBM uncovered a locking bug in wake_futex_pi(): the PI state needs to be locked before we access it. Signed-off-by:
-
Zilvinas Valinskas authored
Fixes a bogus lockdep warning which causes lockdep to disable itself. Acked-by:
-
Alan Stern authored
This patch (as870) adds a delay to ehci-hcd's bus_resume routine. Apparently there are controllers and/or BIOSes out there which need such a delay to get the ports back into their correct state. This fixes Bugzilla #8190. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Nick Piggin authored
madvise(MADV_REMOVE) can go into an infinite loop or cause an oops if the call covers a region from the start of a vma, and extending past that vma. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Jan Beulich authored
adjust legacy IDE resource setting (v2) The change to force legacy mode IDE channels' resources to fixed non-zero values confuses (at least some versions of) X, because the values reported by the kernel and those readable from PCI config space aren't consistent anymore. Therefore, this patch arranges for the respective BARs to also get updated if possible. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
[IA64] fix NULL pointer in ia64/irq_chip-mask/unmask function This patch fixes boot failure because irq_desc->mask() is NULL. - Added mask/unmask functions to ia64's irq desc function table. - rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name. - Tony: Added same change to arch/ia64/sn/kernel/irq.c as pointed out by Eric Biederman ... mask/unmask functions there can be no-op. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Michal Miroslaw authored
[NETFILTER]: nfnetlink_log: fix reference counting Fix reference counting (memory leak) problem in __nfulnl_send() and callers related to packet queueing. Signed-off-by:
Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Paul Moore authored
The current CIPSO engine has a problem where it does not verify that the given sensitivity level has a valid CIPSO mapping when the "std" CIPSO DOI type is used. The end result is that bad packets are sent on the wire which should have never been sent in the first place. This patch corrects this problem by verifying the sensitivity level mapping similar to what is done with the category mapping. This patch also changes the returned error code in this case to -EPERM to better match what the category mapping verification code returns. Signed-off-by:
Paul Moore <paul.moore@hp.com> Acked-by:
-
Joerg Dorchain authored
Recent alterations to the gdth_fill_raw_cmd() path no longer set the sg_ranz field for zero transfer commands. However, this field is used lower down in the function to initialise ha->cmd_len to the size of the firmware packet. If this uninitialised field contains a bogus value, ha->cmd_len can become much larger than the actual firmware packet and end up oopsing in gdth_copy_cmd() as it tries to copy this huge packet to the device (usually because it runs into an unallocated page). The fix is to initialise the sg_ranz field to zero at the start of gdth_fill_raw_cmd(). Signed-off-by:
Joerg Dorchain <joerg@dorchain.net> Acked-by:
"Achim Leubner" <Achim_Leubner@adaptec.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
Evgeniy Polyakov authored
[IPV4]: Fix rtm_to_ifaddr() error handling. Return negative error value (embedded in the pointer) instead of returning NULL. Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Olaf Kirch authored
[IPV6]: Fix for ipv6_setsockopt NULL dereference I came across this bug in http://bugzilla.kernel.org/show_bug.cgi?id=8155Signed-off-by:
Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by:
-
- 13 Mar, 2007 9 commits
-
-
Greg Kroah-Hartman authored
-
Herbert Xu authored
[UDP]: Reread uh pointer after pskb_trim The header may have moved when trimming. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
[INET]: twcal_jiffie should be unsigned long, not int Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
David Miller authored
[SPARC]: Fix bus handling in build_device_resources(). We mistakedly modify 'bus' in the innermost loop. What should happen is that at each register index iteration, we start with the same 'bus'. So preserve it's value at the top level, and use a loop local variable 'dbus' for iteration. This bug causes registers other than the first to be decoded improperly. Signed-off-by:
-
Philipp Reisner authored
[CONNECTOR]: Bugfix for cn_call_callback() When system under heavy stress and must allocate new work instead of reusing old one, new work must use correct completion callback. Patch is based on Philipp's and Lars' work. I only cleaned small stuff (and removed spaces instead of tabs). Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Rainer Weikusat authored
At least the Keyspan USA-19HS USB-to-serial converter supports two different configurations, one where the input endpoints have interrupt transfer type and one where they are bulk endpoints. The default UHCI configuration uses the interrupt input endpoints. The keyspan driver, OTOH, assumes that the device has only bulk endpoints (all URBs are initialized by calling usb_fill_bulk_urb in keyspan.c/ keyspan_setup_urb). This causes the interval field of the input URBs to have a value of zero instead of one, which 'accidentally' worked with Linux at least up to 2.6.17.11 but stopped to with 2.6.18, which changed the UHCI support code handling URBs for interrupt endpoints. The patch below modifies to driver to initialize its input URBs either as interrupt or as bulk URBs, depending on the transfertype contained in the associated endpoint descriptor (only tested with the default configuration) enabling the driver to again receive data from the serial converter. Greg K-H reworked the patch. Signed-off-by:
Rainer Weikusat <rweikusat@sncag.com> Signed-off-by:
-
Johannes Berg authored
[NET]: Fix compat_sock_common_getsockopt typo. This patch fixes a typo in compat_sock_common_getsockopt. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
-
Larry Finger authored
Some versions of the bcm43xx chips only support 30-bit DMA, which means that the descriptors and buffers must be in the first 1 GB of RAM. On the i386 and x86_64 architectures with more than 1 GB RAM, an incorrect assignment may occur. This patch ensures that the various DMA addresses are within the capability of the chip. Testing has been limited to x86_64 as no one has an i386 system with more than 1 GB RAM. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Douglas Gilbert authored
- addresses the reported bug (with GFP_KERNEL -> GFP_ATOMIC) - improves error checking, and - is a subset of the changes to scsi_debug in lk 2.6.21-rc* Compiled and lightly tested (in lk 2.6.21-rc2 environment). Signed-off-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
