We have been using the fact that the QMI and DIAG functions
usually are the only ones with class/subclass/protocol being
ff/ff/ff on Quectel modems. This has allowed us to match the
QMI function without knowing the exact interface number,
which can vary depending on firmware configuration.

The ability to silently reject the DIAG function, which is
usually handled by the option driver, is important for this
method to work.  This is done based on the knowledge that it
has exactly 2 bulk endpoints.  QMI function control interfaces
will have either 3 or 1 endpoint. This rule is universal so
the quirk condition can be removed.

The fixed layouts known from the Gobi1k and Gobi2k modems
have been gradually replaced by more dynamic layouts, and
many vendors now use configurable layouts without changing
device IDs.  Renaming the class/subclass/protocol matching
macro makes it more obvious that this is now not Quectel
specific anymore.

Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

When adding support for unique interrupt names, after testing on a few
devices, it was assumed 32 characters would be sufficient. This
assumption turned out to be incorrect, ZII RDU2 for example uses a
device base name of mv88e6xxx-30be0000.ethernet-1:0, leaving no space
for post fixes such as -g1-atu-prob and -watchdog. The names then
become identical, defeating the point of the patch.

Increase the length of the string to 64 charactoes.
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Fixes: 3095383a ("net: dsa: mv88e6xxx: Unique IRQ name")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f25e1392 removed the support for the pre-production variant
of the Dell DW5821e to avoid probing another USB interface unnecessarily.
However, the pre-production samples are found in the wild, and this lack
of support is causing problems for users of such samples.  It is therefore
necessary to support both variants.

Matching on both interfaces 0 and 1 is not expected to cause any problem
with either variant, as only the QMI function will be probed successfully
on either.  Interface 1 will be rejected based on the HID class for the
production variant:

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

And interface 0 will be rejected based on too few endpoints for the
pre-production variant:

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev= 3.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Fixes: f25e1392 ("qmi_wwan: fix interface number for DW5821e production firmware")
Link: https://whrl.pl/Rf0vNkReported-by: Lars Melin <larsm17@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 9546a0b7 ("tipc: fix wrong connect() return code"), we
fixed the issue with the 'connect()' that returns zero even though the
connecting has failed by waiting for the connection to be 'ESTABLISHED'
really. However, the approach has one drawback in conjunction with our
'lightweight' connection setup mechanism that the following scenario
can happen:

          (server)                        (client)

   +- accept()|                      |             wait_for_conn()
   |          |                      |connect() -------+
   |          |<-------[SYN]---------|                 > sleeping
   |          |                      *CONNECTING       |
   |--------->*ESTABLISHED           |                 |
              |--------[ACK]-------->*ESTABLISHED      > wakeup()
        send()|--------[DATA]------->|\                > wakeup()
        send()|--------[DATA]------->| |               > wakeup()
          .   .          .           . |-> recvq       .
          .   .          .           . |               .
        send()|--------[DATA]------->|/                > wakeup()
       close()|--------[FIN]-------->*DISCONNECTING    |
              *DISCONNECTING         |                 |
              |                      ~~~~~~~~~~~~~~~~~~> schedule()
                                                       | wait again
                                                       .
                                                       .
                                                       | ETIMEDOUT

Upon the receipt of the server 'ACK', the client becomes 'ESTABLISHED'
and the 'wait_for_conn()' process is woken up but not run. Meanwhile,
the server starts to send a number of data following by a 'close()'
shortly without waiting any response from the client, which then forces
the client socket to be 'DISCONNECTING' immediately. When the wait
process is switched to be running, it continues to wait until the timer
expires because of the unexpected socket state. The client 'connect()'
will finally get ‘-ETIMEDOUT’ and force to release the socket whereas
there remains the messages in its receive queue.

Obviously the issue would not happen if the server had some delay prior
to its 'close()' (or the number of 'DATA' messages is large enough),
but any kind of delay would make the connection setup/shutdown "heavy".
We solve this by simply allowing the 'connect()' returns zero in this
particular case. The socket is already 'DISCONNECTING', so any further
write will get '-EPIPE' but the socket is still able to read the
messages existing in its receive queue.

Note: This solution doesn't break the previous one as it deals with a
different situation that the socket state is 'DISCONNECTING' but has no
error (i.e. sk->sk_err = 0).

Fixes: 9546a0b7 ("tipc: fix wrong connect() return code")
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following sparse warning:
net/mptcp/protocol.c:646:13: warning: symbol 'mptcp_sk_clone_lock' was not declared. Should it be static?

Fixes: b0519de8 ("mptcp: fix use-after-free for ipv6")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following sparse warning:

net/tipc/node.c:281:6: warning: symbol 'tipc_node_free' was not declared. Should it be static?
net/tipc/node.c:2801:5: warning: symbol '__tipc_nl_node_set_key' was not declared. Should it be static?
net/tipc/node.c:2878:5: warning: symbol '__tipc_nl_node_flush_key' was not declared. Should it be static?

Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication")
Fixes: e1f32190 ("tipc: add support for AEAD key setting via netlink")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull misc SCSI fixes from James Bottomley:
 "Five small patches, all in drivers or doc, which missed the initial
  pull request.

  The qla2xxx and megaraid_sas are actual fixes and the rest are
  spelling and doc changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: fix spelling mistake "initilized" -> "initialized"
  scsi: pm80xx: fix spelling mistake "to" -> "too"
  scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com
  scsi: megaraid_sas: fixup MSIx interrupt setup during resume
  scsi: qla2xxx: Fix unbound NVME response length

Pull networking fixes from David Miller:

 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.

 2) Fix thermal zone registration in iwlwifi, from Andrei
    Otcheretianski.

 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.

 4) Use after free in mptcp, from Florian Westphal.

 5) Use after free in wireguard's root_remove_peer_lists, from Eric
    Dumazet.

 6) Properly access packets heads in bonding alb code, from Eric
    Dumazet.

 7) Fix data race in skb_queue_len(), from Qian Cai.

 8) Fix regression in r8169 on some chips, from Heiner Kallweit.

 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.

10) Certain kinds of set link netlink operations can cause a NULL deref
    in the ipv6 addrconf code. Fix from Eric Dumazet.

11) Don't cancel uninitialized work queue in drop monitor, from Ido
    Schimmel.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  net: thunderx: use proper interface type for RGMII
  mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
  bpf: Improve bucket_log calculation logic
  selftests/bpf: Test freeing sockmap/sockhash with a socket in it
  bpf, sockhash: Synchronize_rcu before free'ing map
  bpf, sockmap: Don't sleep while holding RCU lock on tear-down
  bpftool: Don't crash on missing xlated program instructions
  bpf, sockmap: Check update requirements after locking
  drop_monitor: Do not cancel uninitialized work item
  mlxsw: spectrum_dpipe: Add missing error path
  mlxsw: core: Add validation of hardware device types for MGPIR register
  mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
  selftests: mlxsw: Add test cases for local table route replacement
  mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
  net: dsa: microchip: enable module autoprobe
  ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
  dpaa_eth: support all modes with rate adapting PHYs
  net: stmmac: update pci platform data to use phy_interface
  net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
  net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix an existing bug in our user access handling, exposed by one of
   the bug fixes we merged this cycle.

 - A fix for a boot hang on 32-bit with CONFIG_TRACE_IRQFLAGS and the
   recently added CONFIG_VMAP_STACK.

Thanks to: Christophe Leroy, Guenter Roeck.

* tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK
  powerpc/futex: Fix incorrect user access blocking

This is a merge error on my part - the driver was merged into mainline
by commit c5951e7c ("Merge tag 'mips_5.6' of git://../mips/linux")
over a week ago, but nobody apparently noticed that it didn't actually
build due to still having a reference to the devm_ioremap_nocache()
function, removed a few days earlier through commit 6a1000bd ("Merge
tag 'ioremap-5.6' of git://../ioremap").

Apparently this didn't get any build testing anywhere.  Not perhaps all
that surprising: it's restricted to 64-bit MIPS only, and only with the
new SGI_MFD_IOC3 support enabled.

I only noticed because the ioremap conflicts in the ARM SoC driver
update made me check there weren't any others hiding, and I found this
one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late, or that
  had more complex dependencies on more than one topic branch that makes
  sense to keep separately.

   - TI support for secure accelerators and hwrng on OMAP4/5

   - TI camera changes for dra7 and am437x and SGX improvement due to
     better reset control support on am335x, am437x and dra7

   - Davinci moves to proper clocksource on DM365, and regulator/audio
     improvements for DM365 and DM644x eval boards"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
  ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
  ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
  ARM: dts: Configure interconnect target module for am437x sgx
  ARM: dts: Configure sgx for dra7
  ARM: dts: Configure rstctrl reset for am335x SGX
  ARM: dts: dra7: Add ti-sysc node for VPE
  ARM: dts: dra7: add vpe clkctrl node
  ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
  ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
  ARM: dts: am43xx: add support for clkout1 clock
  arm: dts: dra76-evm: Add CAL and OV5640 nodes
  arm: dtsi: dra76x: Add CAL dtsi node
  arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
  ARM: dts: DRA72: Add CAL dtsi node
  ARM: dts: dra7-l4: Add ti-sysc node for CAM
  ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  ARM: dts: dra7: add cam clkctrl node
  ARM: OMAP2+: Drop legacy platform data for omap4 des
  ARM: OMAP2+: Drop legacy platform data for omap4 sham
  ARM: OMAP2+: Drop legacy platform data for omap4 aes
  ...

Pull ARM SoC defconfig updates from Olof Johansson:
 "We keep this in a separate branch to avoid cross-branch conflicts, but
  most of the material here is fairly boring -- some new drivers turned
  on for hardware since they were merged, and some refreshed files due
  to time having moved a lot of entries around"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
  arm64: defconfig: Enable Broadcom's GENET Ethernet controller
  ARM: multi_v7_defconfig: Enable devfreq thermal integration
  ARM: exynos_defconfig: Enable devfreq thermal integration
  ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
  ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
  arm64: defconfig: Enable Actions Semi specific drivers
  arm64: defconfig: Enable Broadcom's STB PCIe controller
  arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
  ARM: configs: at91: enable config flags for sam9x60 SoC
  ARM: configs: at91: use savedefconfig
  arm64: defconfig: Enable tegra XUDC support
  ARM: defconfig: gemini: Update defconfig
  arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
  arm64: defconfig: enable CONFIG_QCOM_CPR
  arm64: defconfig: Enable HFPLL
  arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
  ARM: imx_v6_v7_defconfig: Select the TFP410 driver
  ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
  arm64: defconfig: Enable ATH10K_SNOC
  ...

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - Nvidia: Fuse support for Tegra194, continued memory controller
     pieces for Tegra30

   - NXP/FSL: Refactorings of QuickEngine drivers to support
     ARM/ARM64/PPC

   - NXP/FSL: i.MX8MP SoC driver pieces

   - TI Keystone: ring accelerator driver

   - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.

   - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
     communication for power management

   - Overall support patch set for cpuidle on more complex hierarchies
     (PSCI-based)

  and misc cleanups, refactorings of Marvell, TI, other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
  drivers: soc: xilinx: Use mailbox IPI callback
  dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
  drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
  MAINTAINERS: Add brcmstb PCIe controller entry
  soc/tegra: fuse: Unmap registers once they are not needed anymore
  soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
  soc/tegra: fuse: Warn if straps are not ready
  soc/tegra: fuse: Cache values of straps and Chip ID registers
  memory: tegra30-emc: Correct error message for timed out auto calibration
  memory: tegra30-emc: Firm up hardware programming sequence
  memory: tegra30-emc: Firm up suspend/resume sequence
  soc/tegra: regulators: Do nothing if voltage is unchanged
  memory: tegra: Correct reset value of xusb_hostr
  soc/tegra: fuse: Add APB DMA dependency for Tegra20
  bus: tegra-aconnect: Remove PM_CLK dependency
  dt-bindings: mediatek: add MT6765 power dt-bindings
  soc: mediatek: cmdq: delete not used define
  memory: tegra: Add support for the Tegra194 memory controller
  memory: tegra: Only include support for enabled SoCs
  memory: tegra: Support DVFS on Tegra186 and later
  ...

Pull ARM Device-tree updates from Olof Johansson:
 "New SoCs:

   - Atmel/Microchip SAM9X60 (ARM926 SoC)

   - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all
     variants of it with different GPU/media IP configurations.

   - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU)

   - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of
     db8500)

   - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem)

   - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class)

  New boards:

   - Allwinner:
      + Emlid Neutis SoM (H3 variant)
      + Libre Computer ALL-H3-IT
      + PineH64 Model B

   - Amlogic:
      + Libretech Amlogic GX PC (s905d and s912-based variants)

   - Atmel/Microchip:
      + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1)

   - Marvell:
      + Armada 385-based SolidRun Clearfog GTR

   - NXP:
      + Gateworks GW59xx boards based on i.MX6/6Q/6QDL
      + Tolino Shine 3 eBook reader (i.MX6sl)
      + Embedded Artists COM (i.MX7ULP)
      + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems)
      + Google Coral Edge TPU (i.MX8MQ)

   - Rockchip:
      + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs)
      + Radxa Rock Pi N10 (RK3399Pro-based)
      + VMARC RK3399Pro SOM

   - ST:
      + Reference boards for stm32mp15

   - ST Ericsson:
      + Samsung Galaxy S III mini (GT-I8190)
      + HREF520 reference board for DB8520

   - TI OMAP:
      + Gen1 Amazon Echo (OMAP3630-based)

   - Qualcomm:
      + Inforce 6640 Single Board Computer (msm8996-based)
      + SC7180 IDP (SC7180-based)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits)
  dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml
  arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
  arm64: dts: ti: k3-am65-main Add CAL node
  arm64: dts: ti: k3-j721e-main: Add McASP nodes
  arm64: dts: ti: k3-am654-main: Add McASP nodes
  arm64: dts: ti: k3-j721e: DMA support
  arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
  arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
  arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
  arm64: dts: ti: k3-am65: DMA support
  arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
  arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
  ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
  ARM: dts: aspeed: rainier: Switch PSUs to unknown version
  arm64: dts: rockchip: Kill off "simple-panel" compatibles
  ARM: dts: rockchip: Kill off "simple-panel" compatibles
  arm64: dts: rockchip: rename dwmmc node names to mmc
  ARM: dts: rockchip: rename dwmmc node names to mmc
  arm64: dts: exynos: Rename Samsung and Exynos to lowercase
  arm64: dts: uniphier: add reset-names to NAND controller node
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "Most of these are smaller fixes that have accrued, and some continued
  cleanup of OMAP platforms towards shared frameworks.

  One new SoC from Atmel/Microchip: sam9x60"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  ARM: OMAP2+: Fix undefined reference to omap_secure_init
  ARM: s3c64xx: Drop unneeded select of TIMER_OF
  ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0
  ARM: s3c24xx: Switch to atomic pwm API in rx1950
  ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers
  ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available
  ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
  ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization
  ARM: at91: Documentation: add sam9x60 product and datasheet
  ARM: at91: pm: use of_device_id array to find the proper shdwc node
  ARM: at91: pm: use SAM9X60 PMC's compatible
  ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A
  ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start
  ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume
  ARM: tegra: Modify reshift divider during LP1
  ARM: tegra: Enable PLLP bypass during Tegra124 LP1
  ARM: samsung: Rename Samsung and Exynos to lowercase
  ARM: exynos: Correct the help text for platform Kconfig option
  ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB
  ARM: brcmstb: Add debug UART entry for 7216
  ...

Pull compat-ioctl fix from Arnd Bergmann:
 "One patch in the compat-ioctl series broke 32-bit rootfs for multiple
  people testing on 64-bit kernels. Let's fix it in -rc1 before others
  run into the same issue"

* tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
  compat_ioctl: fix FIONREAD on devices

Pull vfs file system parameter updates from Al Viro:
 "Saner fs_parser.c guts and data structures. The system-wide registry
  of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
  the horror switch() in fs_parse() that would have to grow another case
  every time something got added to that system-wide registry.

  New syntax types can be added by filesystems easily now, and their
  namespace is that of functions - not of system-wide enum members. IOW,
  they can be shared or kept private and if some turn out to be widely
  useful, we can make them common library helpers, etc., without having
  to do anything whatsoever to fs_parse() itself.

  And we already get that kind of requests - the thing that finally
  pushed me into doing that was "oh, and let's add one for timeouts -
  things like 15s or 2h". If some filesystem really wants that, let them
  do it. Without somebody having to play gatekeeper for the variants
  blessed by direct support in fs_parse(), TYVM.

  Quite a bit of boilerplate is gone. And IMO the data structures make a
  lot more sense now. -200LoC, while we are at it"

* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
  tmpfs: switch to use of invalfc()
  cgroup1: switch to use of errorfc() et.al.
  procfs: switch to use of invalfc()
  hugetlbfs: switch to use of invalfc()
  cramfs: switch to use of errofc() et.al.
  gfs2: switch to use of errorfc() et.al.
  fuse: switch to use errorfc() et.al.
  ceph: use errorfc() and friends instead of spelling the prefix out
  prefix-handling analogues of errorf() and friends
  turn fs_param_is_... into functions
  fs_parse: handle optional arguments sanely
  fs_parse: fold fs_parameter_desc/fs_parameter_spec
  fs_parser: remove fs_parameter_description name field
  add prefix to fs_context->log
  ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
  new primitive: __fs_parse()
  switch rbd and libceph to p_log-based primitives
  struct p_log, variants of warnf() et.al. taking that one instead
  teach logfc() to handle prefices, give it saner calling conventions
  get rid of cg_invalf()
  ...

Pull misc vfs updates from Al Viro:

 - bmap series from cmaiolino

 - getting rid of convolutions in copy_mount_options() (use a couple of
   copy_from_user() instead of the __get_user() crap)

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  saner copy_mount_options()
  fibmap: Reject negative block numbers
  fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
  ecryptfs: drop direct calls to ->bmap
  cachefiles: drop direct usage of ->bmap method.
  fs: Enable bmap() function to properly return errors

Merge thundering herd avoidance on pipe IO.

This would have been applied for 5.5 already, but got delayed because of
a user-space race condition in the GNU make jobserver code.  Now that
there's a new GNU make 4.3 release, and most distributions seem to have
at least applied the (almost three year old) fix for the problem, let's
see if people notice.

And it might have been just bad random timing luck on my machine.

If you do hit the race condition, things will still work, but the
symptom is that you don't get nearly the expected parallelism when using
"make -j<N>".

The jobserver bug can definitely happen without this patch too, but
seems to be easier to trigger when we no longer wake up pipe waiters
unnecessarily.

* pipe-exclusive-wakeup:
  pipe: use exclusive waits when reading or writing

This makes the pipe code use separate wait-queues and exclusive waiting
for readers and writers, avoiding a nasty thundering herd problem when
there are lots of readers waiting for data on a pipe (or, less commonly,
lots of writers waiting for a pipe to have space).

While this isn't a common occurrence in the traditional "use a pipe as a
data transport" case, where you typically only have a single reader and
a single writer process, there is one common special case: using a pipe
as a source of "locking tokens" rather than for data communication.

In particular, the GNU make jobserver code ends up using a pipe as a way
to limit parallelism, where each job consumes a token by reading a byte
from the jobserver pipe, and releases the token by writing a byte back
to the pipe.

This pattern is fairly traditional on Unix, and works very well, but
will waste a lot of time waking up a lot of processes when only a single
reader needs to be woken up when a writer releases a new token.

A simplified test-case of just this pipe interaction is to create 64
processes, and then pass a single token around between them (this
test-case also intentionally passes another token that gets ignored to
test the "wake up next" logic too, in case anybody wonders about it):

    #include <unistd.h>

    int main(int argc, char **argv)
    {
        int fd[2], counters[2];

        pipe(fd);
        counters[0] = 0;
        counters[1] = -1;
        write(fd[1], counters, sizeof(counters));

        /* 64 processes */
        fork(); fork(); fork(); fork(); fork(); fork();

        do {
                int i;
                read(fd[0], &i, sizeof(i));
                if (i < 0)
                        continue;
                counters[0] = i+1;
                write(fd[1], counters, (1+(i & 1)) *sizeof(int));
        } while (counters[0] < 1000000);
        return 0;
    }

and in a perfect world, passing that token around should only cause one
context switch per transfer, when the writer of a token causes a
directed wakeup of just a single reader.

But with the "writer wakes all readers" model we traditionally had, on
my test box the above case causes more than an order of magnitude more
scheduling: instead of the expected ~1M context switches, "perf stat"
shows

        231,852.37 msec task-clock                #   15.857 CPUs utilized
        11,250,961      context-switches          #    0.049 M/sec
           616,304      cpu-migrations            #    0.003 M/sec
             1,648      page-faults               #    0.007 K/sec
 1,097,903,998,514      cycles                    #    4.735 GHz
   120,781,778,352      instructions              #    0.11  insn per cycle
    27,997,056,043      branches                  #  120.754 M/sec
       283,581,233      branch-misses             #    1.01% of all branches

      14.621273891 seconds time elapsed

       0.018243000 seconds user
       3.611468000 seconds sys

before this commit.

After this commit, I get

          5,229.55 msec task-clock                #    3.072 CPUs utilized
         1,212,233      context-switches          #    0.232 M/sec
           103,951      cpu-migrations            #    0.020 M/sec
             1,328      page-faults               #    0.254 K/sec
    21,307,456,166      cycles                    #    4.074 GHz
    12,947,819,999      instructions              #    0.61  insn per cycle
     2,881,985,678      branches                  #  551.096 M/sec
        64,267,015      branch-misses             #    2.23% of all branches

       1.702148350 seconds time elapsed

       0.004868000 seconds user
       0.110786000 seconds sys

instead. Much better.

[ Note! This kernel improvement seems to be very good at triggering a
  race condition in the make jobserver (in GNU make 4.2.1) for me. It's
  a long known bug that was fixed back in June 2017 by GNU make commit
  b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to
  avoid hangs.").

  But there wasn't a new release of GNU make until 4.3 on Jan 19 2020,
  so a number of distributions may still have the buggy version. Some
  have backported the fix to their 4.2.1 release, though, and even
  without the fix it's quite timing-dependent whether the bug actually
  is hit. ]

Josh Triplett says:
 "I've been hammering on your pipe fix patch (switching to exclusive
  wait queues) for a month or so, on several different systems, and I've
  run into no issues with it. The patch *substantially* improves
  parallel build times on large (~100 CPU) systems, both with parallel
  make and with other things that use make's pipe-based jobserver.

  All current distributions (including stable and long-term stable
  distributions) have versions of GNU make that no longer have the
  jobserver bug"
Tested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

My final cleanup patch for sys_compat_ioctl() introduced a regression on
the FIONREAD ioctl command, which is used for both regular and special
files, but only works on regular files after my patch, as I had missed
the warning that Al Viro put into a comment right above it.

Change it back so it can work on any file again by moving the implementation
to do_vfs_ioctl() instead.

Fixes: 77b90401 ("compat_ioctl: simplify the implementation")
Reported-and-tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The configuration of the OCTEONTX XCV_DLL_CTL register via
xcv_init_hw() is such that the RGMII RX delay is bypassed
leaving the RGMII TX delay enabled in the MAC:

	/* Configure DLL - enable or bypass
	 * TX no bypass, RX bypass
	 */
	cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
	cfg &= ~0xFF03;
	cfg |= CLKRX_BYP;
	writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);

This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID
and not PHY_INTERFACE_MODE_RGMII.

Fixing this allows RGMII PHY drivers to do the right thing (enable
RX delay in the PHY) instead of erroneously enabling both delays in the
PHY.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-2020-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.6

First set of fixes for v5.6. Buffer overflow fixes to mwifiex, quite a
few functionality fixes to iwlwifi and smaller fixes to other drivers.

mwifiex

* fix an unlock from a previous security fix

* fix two buffer overflows

libertas

* fix two bugs from previous security fixes

iwlwifi

* fix module removal with multiple NICs

* don't treat IGTK removal failure as an error

* avoid FW crashes due to DTS measurement races

* fix a potential use after free in FTM code

* prevent a NULL pointer dereference in iwl_mvm_cfg_he_sta()

* fix TDLS discovery

* check all CPUs when trying to detect an error during resume

rtw88

* fix clang warning

mt76

* fix reading of max_nss value from a register
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2020-02-07

The following pull-request contains BPF updates for your *net* tree.

We've added 15 non-merge commits during the last 10 day(s) which contain
a total of 12 files changed, 114 insertions(+), 31 deletions(-).

The main changes are:

1) Various BPF sockmap fixes related to RCU handling in the map's tear-
   down code, from Jakub Sitnicki.

2) Fix macro state explosion in BPF sk_storage map when calculating its
   bucket_log on allocation, from Martin KaFai Lau.

3) Fix potential BPF sockmap update race by rechecking socket's established
   state under lock, from Lorenz Bauer.

4) Fix crash in bpftool on missing xlated instructions when kptr_restrict
   sysctl is set, from Toke Høiland-Jørgensen.

5) Fix i40e's XSK wakeup code to return proper error in busy state and
   various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski.

6) Fix the way modifiers are skipped in BTF in the verifier while walking
   pointers to avoid program rejection, from Alexei Starovoitov.

7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and
   ii) to fix undefined reference linker errors for older gcc version due to
   order of passed gcc parameters, from Yulia Kartseva and Song Liu.

8) Fix a trampoline_count BPF kselftest warning about missing braces around
   initializer, from Andrii Nakryiko.

9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in
   bpftool, from Michal Rostecki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_PROVE_LOCKING is selected together with (now default)
CONFIG_VMAP_STACK, kernel enter deadlock during boot.

At the point of checking whether interrupts are enabled or not, the
value of MSR saved on stack is read using the physical address of the
stack. But at this point, when using VMAP stack the DATA MMU
translation has already been re-enabled, leading to deadlock.

Don't use the physical address of the stack when
CONFIG_VMAP_STACK is set.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 02847487 ("powerpc/32: prepare for CONFIG_VMAP_STACK")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/daeacdc0dec0416d1c587cc9f9e7191ad3068dc0.1581095957.git.christophe.leroy@c-s.fr

The early versions of our kernel user access prevention (KUAP) were
written by Russell and Christophe, and didn't have separate
read/write access.

At some point I picked up the series and added the read/write access,
but I failed to update the usages in futex.h to correctly allow read
and write.

However we didn't notice because of another bug which was causing the
low-level code to always enable read and write. That bug was fixed
recently in commit 1d8f739b ("powerpc/kuap: Fix set direction in
allow/prevent_user_access()").

futex_atomic_cmpxchg_inatomic() is passed the user address as %3 and
does:

  1:     lwarx   %1,  0, %3
         cmpw    0,  %1, %4
         bne-    3f
  2:     stwcx.  %5,  0, %3

Which clearly loads and stores from/to %3. The logic in
arch_futex_atomic_op_inuser() is similar, so fix both of them to use
allow_read_write_user().

Without this fix, and with PPC_KUAP_DEBUG=y, we see eg:

  Bug: Read fault blocked by AMR!
  WARNING: CPU: 94 PID: 149215 at arch/powerpc/include/asm/book3s/64/kup-radix.h:126 __do_page_fault+0x600/0xf30
  CPU: 94 PID: 149215 Comm: futex_requeue_p Tainted: G        W         5.5.0-rc7-gcc9x-g4c25df56 #1
  ...
  NIP [c000000000070680] __do_page_fault+0x600/0xf30
  LR [c00000000007067c] __do_page_fault+0x5fc/0xf30
  Call Trace:
  [c00020138e5637e0] [c00000000007067c] __do_page_fault+0x5fc/0xf30 (unreliable)
  [c00020138e5638c0] [c00000000000ada8] handle_page_fault+0x10/0x30
  --- interrupt: 301 at cmpxchg_futex_value_locked+0x68/0xd0
      LR = futex_lock_pi_atomic+0xe0/0x1f0
  [c00020138e563bc0] [c000000000217b50] futex_lock_pi_atomic+0x80/0x1f0 (unreliable)
  [c00020138e563c30] [c00000000021b668] futex_requeue+0x438/0xb60
  [c00020138e563d60] [c00000000021c6cc] do_futex+0x1ec/0x2b0
  [c00020138e563d90] [c00000000021c8b8] sys_futex+0x128/0x200
  [c00020138e563e20] [c00000000000b7ac] system_call+0x5c/0x68

Fixes: de78a9c4 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: syzbot+e808452bad7c375cbee6@syzkaller-ppc64.appspotmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200207122145.11928-1-mpe@ellerman.id.au

Fix u8 cast reading max_nss from MT_TOP_STRAP_STA register in
mt7615_eeprom_parse_hw_cap routine

Fixes: acf5457f ("mt76: mt7615: read {tx,rx} mask from eeprom")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Pull fuse fixes from Miklos Szeredi:

 - Fix a regression introduced in v5.1 that triggers WARNINGs for some
   fuse filesystems

 - Fix an xfstest failure

 - Allow overlayfs to be used on top of fuse/virtiofs

 - Code and documentation cleanups

* tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use true,false for bool variable
  Documentation: filesystems: convert fuse to RST
  fuse: Support RENAME_WHITEOUT flag
  fuse: don't overflow LLONG_MAX with end offset
  fix up iter on short count in fuse_direct_io()

Pull gfs2 fixes from Andreas Gruenbacher:

 - Fix a bug in Abhi Das's journal head lookup improvements that can
   cause a valid journal to be rejected.

 - Fix an O_SYNC write handling bug reported by Christoph Hellwig.

* tag 'gfs2-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: fix O_SYNC write handling
  gfs2: move setting current->backing_dev_info
  gfs2: fix gfs2_find_jhead that returns uninitialized jhead with seq 0

Pull orangefs fix from Mike Marshall:
 "Debugfs fix for orangefs.

  Vasliy Averin noticed that 'if seq_file .next function does not change
  position index, read after some lseek can generate unexpected output'
  and sent in this fix"

* tag 'for-linus-5.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  help_next should increase position index

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - Server-to-server copy code from Olga.

     To use it, client and both servers must have support, the target
     server must be able to access the source server over NFSv4.2, and
     the target server must have the inter_copy_offload_enable module
     parameter set.

   - Improvements and bugfixes for the new filehandle cache, especially
     in the container case, from Trond

   - Also from Trond, better reporting of write errors.

   - Y2038 work from Arnd"

* tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux: (55 commits)
  sunrpc: expiry_time should be seconds not timeval
  nfsd: make nfsd_filecache_wq variable static
  nfsd4: fix double free in nfsd4_do_async_copy()
  nfsd: convert file cache to use over/underflow safe refcount
  nfsd: Define the file access mode enum for tracing
  nfsd: Fix a perf warning
  nfsd: Ensure sampling of the write verifier is atomic with the write
  nfsd: Ensure sampling of the commit verifier is atomic with the commit
  sunrpc: clean up cache entry add/remove from hashtable
  sunrpc: Fix potential leaks in sunrpc_cache_unhash()
  nfsd: Ensure exclusion between CLONE and WRITE errors
  nfsd: Pass the nfsd_file as arguments to nfsd4_clone_file_range()
  nfsd: Update the boot verifier on stable writes too.
  nfsd: Fix stable writes
  nfsd: Allow nfsd_vfs_write() to take the nfsd_file as an argument
  nfsd: Fix a soft lockup race in nfsd_file_mark_find_or_create()
  nfsd: Reduce the number of calls to nfsd_file_gc()
  nfsd: Schedule the laundrette regularly irrespective of file errors
  nfsd: Remove unused constant NFSD_FILE_LRU_RESCAN
  nfsd: Containerise filecache laundrette
  ...

Puyll NFS client updates from Anna Schumaker:
 "Stable bugfixes:
   - Fix memory leaks and corruption in readdir # v2.6.37+
   - Directory page cache needs to be locked when read # v2.6.37+

  New features:
   - Convert NFS to use the new mount API
   - Add "softreval" mount option to let clients use cache if server goes down
   - Add a config option to compile without UDP support
   - Limit the number of inactive delegations the client can cache at once
   - Improved readdir concurrency using iterate_shared()

  Other bugfixes and cleanups:
   - More 64-bit time conversions
   - Add additional diagnostic tracepoints
   - Check for holes in swapfiles, and add dependency on CONFIG_SWAP
   - Various xprtrdma cleanups to prepare for 5.7's changes
   - Several fixes for NFS writeback and commit handling
   - Fix acls over krb5i/krb5p mounts
   - Recover from premature loss of openstateids
   - Fix NFS v3 chacl and chmod bug
   - Compare creds using cred_fscmp()
   - Use kmemdup_nul() in more places
   - Optimize readdir cache page invalidation
   - Lease renewal and recovery fixes"

* tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (93 commits)
  NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewals
  NFSv4: try lease recovery on NFS4ERR_EXPIRED
  NFS: Fix memory leaks
  nfs: optimise readdir cache page invalidation
  NFS: Switch readdir to using iterate_shared()
  NFS: Use kmemdup_nul() in nfs_readdir_make_qstr()
  NFS: Directory page cache pages need to be locked when read
  NFS: Fix memory leaks and corruption in readdir
  SUNRPC: Use kmemdup_nul() in rpc_parse_scope_id()
  NFS: Replace various occurrences of kstrndup() with kmemdup_nul()
  NFSv4: Limit the total number of cached delegations
  NFSv4: Add accounting for the number of active delegations held
  NFSv4: Try to return the delegation immediately when marked for return on close
  NFS: Clear NFS_DELEGATION_RETURN_IF_CLOSED when the delegation is returned
  NFSv4: nfs_inode_evict_delegation() should set NFS_DELEGATION_RETURNING
  NFS: nfs_find_open_context() should use cred_fscmp()
  NFS: nfs_access_get_cached_rcu() should use cred_fscmp()
  NFSv4: pnfs_roc() must use cred_fscmp() to compare creds
  NFS: remove unused macros
  nfs: Return EINVAL rather than ERANGE for mount parse errors
  ...

It was reported that the max_t, ilog2, and roundup_pow_of_two macros have
exponential effects on the number of states in the sparse checker.

This patch breaks them up by calculating the "nbuckets" first so that the
"bucket_log" only needs to take ilog2().

In addition, Linus mentioned:

  Patch looks good, but I'd like to point out that it's not just sparse.

  You can see it with a simple

    make net/core/bpf_sk_storage.i
    grep 'smap->bucket_log = ' net/core/bpf_sk_storage.i | wc

  and see the end result:

      1  365071 2686974

  That's one line (the assignment line) that is 2,686,974 characters in
  length.

  Now, sparse does happen to react particularly badly to that (I didn't
  look to why, but I suspect it's just that evaluating all the types
  that don't actually ever end up getting used ends up being much more
  expensive than it should be), but I bet it's not good for gcc either.

Fixes: 6ac99e8f ("bpf: Introduce bpf sk local storage")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Link: https://lore.kernel.org/bpf/20200207081810.3918919-1-kafai@fb.com

Commit 7e81a353 ("bpf: Sockmap, ensure sock lock held during tear
down") introduced sleeping issues inside RCU critical sections and while
holding a spinlock on sockmap/sockhash tear-down. There has to be at least
one socket in the map for the problem to surface.

This adds a test that triggers the warnings for broken locking rules. Not a
fix per se, but rather tooling to verify the accompanying fixes. Run on a
VM with 1 vCPU to reproduce the warnings.

Fixes: 7e81a353 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com

We need to have a synchronize_rcu before free'ing the sockhash because any
outstanding psock references will have a pointer to the map and when they
use it, this could trigger a use after free.

This is a sister fix for sockhash, following commit 2bb90e5c ("bpf:
sockmap, synchronize_rcu before free'ing map") which addressed sockmap,
which comes from a manual audit.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-3-jakub@cloudflare.com

rcu_read_lock is needed to protect access to psock inside sock_map_unref
when tearing down the map. However, we can't afford to sleep in lock_sock
while in RCU read-side critical section. Grab the RCU lock only after we
have locked the socket.

This fixes RCU warnings triggerable on a VM with 1 vCPU when free'ing a
sockmap/sockhash that contains at least one socket:

| =============================
| WARNING: suspicious RCU usage
| 5.5.0-04005-g8fc91b97 #450 Not tainted
| -----------------------------
| include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section!
|
| other info that might help us debug this:
|
|
| rcu_scheduler_active = 2, debug_locks = 1
| 4 locks held by kworker/0:1/62:
|  #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0
|  #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0
|  #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_map_free+0x5/0x170
|  #3: ffff8881368c5df8 (&stab->lock){+...}, at: sock_map_free+0x64/0x170
|
| stack backtrace:
| CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b97 #450
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
|  dump_stack+0x71/0xa0
|  ___might_sleep+0x105/0x190
|  lock_sock_nested+0x28/0x90
|  sock_map_free+0x95/0x170
|  bpf_map_free_deferred+0x58/0x80
|  process_one_work+0x260/0x5e0
|  worker_thread+0x4d/0x3e0
|  kthread+0x108/0x140
|  ? process_one_work+0x5e0/0x5e0
|  ? kthread_park+0x90/0x90
|  ret_from_fork+0x3a/0x50

| =============================
| WARNING: suspicious RCU usage
| 5.5.0-04005-g8fc91b97-dirty #452 Not tainted
| -----------------------------
| include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section!
|
| other info that might help us debug this:
|
|
| rcu_scheduler_active = 2, debug_locks = 1
| 4 locks held by kworker/0:1/62:
|  #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0
|  #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0
|  #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_hash_free+0x5/0x1d0
|  #3: ffff888139966e00 (&htab->buckets[i].lock){+...}, at: sock_hash_free+0x92/0x1d0
|
| stack backtrace:
| CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b97-dirty #452
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
|  dump_stack+0x71/0xa0
|  ___might_sleep+0x105/0x190
|  lock_sock_nested+0x28/0x90
|  sock_hash_free+0xec/0x1d0
|  bpf_map_free_deferred+0x58/0x80
|  process_one_work+0x260/0x5e0
|  worker_thread+0x4d/0x3e0
|  kthread+0x108/0x140
|  ? process_one_work+0x5e0/0x5e0
|  ? kthread_park+0x90/0x90
|  ret_from_fork+0x3a/0x50

Fixes: 7e81a353 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-2-jakub@cloudflare.com

Turns out the xlated program instructions can also be missing if
kptr_restrict sysctl is set. This means that the previous fix to check the
jited_prog_insns pointer was insufficient; add another check of the
xlated_prog_insns pointer as well.

Fixes: 5b79bcdf ("bpftool: Don't crash on missing jited insns or ksyms")
Fixes: cae73f23 ("bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200206102906.112551-1-toke@redhat.com

It's currently possible to insert sockets in unexpected states into
a sockmap, due to a TOCTTOU when updating the map from a syscall.
sock_map_update_elem checks that sk->sk_state == TCP_ESTABLISHED,
locks the socket and then calls sock_map_update_common. At this
point, the socket may have transitioned into another state, and
the earlier assumptions don't hold anymore. Crucially, it's
conceivable (though very unlikely) that a socket has become unhashed.
This breaks the sockmap's assumption that it will get a callback
via sk->sk_prot->unhash.

Fix this by checking the (fixed) sk_type and sk_protocol without the
lock, followed by a locked check of sk_state.

Unfortunately it's not possible to push the check down into
sock_(map|hash)_update_common, since BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB
run before the socket has transitioned from TCP_SYN_RECV into
TCP_ESTABLISHED.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200207103713.28175-1-lmb@cloudflare.com

Pull Documentation fixes from Jonathan Corbet:
 "A handful of small documentation fixes that wandered in"

* tag 'docs-5.6-2' of git://git.lwn.net/linux:
  Allow git builds of Sphinx
  Documentation: changes.rst: update several outdated project URLs
  Documentation: build warnings related to missing blank lines after explicit markups has been fixed
  mailmap: add entry for Tiezhu Yang
  Documentation/ko_KR/howto: Update a broken link
  Documentation/ko_KR/howto: Update broken web addresses
  docs/locking: Fix outdated section names

Pull i2c updates from Wolfram Sang:
 "i2c core:

   - huge improvements and refactorizations of the Linux I2C
     documentation (lots of thanks to Luca for doing it and Jean for the
     careful review)

   - subsystem wide API conversion to i2c_new_client_device()

   - remove obsolete parport-light driver

   - smaller core updates (removal of 'extern', enabling more compile
     testing, use more helper macros)

   - and quite a bunch of driver updates (new IDs, simplifications,
     better PM, support of atomic transfers and other improvements)

  i2c-mux:

   - The main feature is the idle-state rework of the pca954x driver
     from Biwen Li

  at24 driver:

   - minor maintenance: update the license tag, sort headers

   - move support for the write-protect pin into nvmem core

   - add a reference to the new wp-gpios property in nvmem to at25
     bindings

   - add support for regulator and pm_runtime control"

* 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits)
  i2c: cros-ec-tunnel: Fix ACPI identifier
  i2c: cros-ec-tunnel: Fix slave device enumeration
  i2c: stm32f7: add PM_SLEEP suspend/resume support
  i2c: cadence: Fix wording in i2c-cadence driver
  i2c: cadence: Fix power management order of operations
  i2c: cadence: Fix error printing in case of defer
  i2c: cadence: Handle transfer_size rollover
  i2c: i801: Add support for Intel Comet Lake PCH-V
  docs: i2c: writing-clients: properly name the stop condition
  docs: i2c: i2c-protocol: use same wording as smbus-protocol
  docs: i2c: rename sections so the overall picture is clearer
  docs: i2c: old-module-parameters: use monospace instead of ""
  docs: i2c: old-module-parameters: clarify this is for obsolete kernels
  docs: i2c: old-module-parameters: fix internal hyperlink
  docs: i2c: instantiating-devices: use monospace for sysfs attributes
  docs: i2c: instantiating-devices: rearrange static instatiation
  docs: i2c: instantiating-devices: fix internal hyperlink
  docs: i2c: smbus-protocol: improve I2C Block transactions description
  docs: i2c: smbus-protocol: fix punctuation
  docs: i2c: smbus-protocol: fix typo
  ...