- 28 Oct, 2015 40 commits
-
-
Eric Dumazet authored
[ Upstream commit c7c49b8f ] Greg reported crashes hitting the following check in __sk_backlog_rcv() BUG_ON(!sock_flag(sk, SOCK_MEMALLOC)); The pfmemalloc bit is currently checked in sk_filter(). This works correctly for TCP, because sk_filter() is ran in tcp_v[46]_rcv() before hitting the prequeue or backlog checks. For UDP or other protocols, this does not work, because the sk_filter() is ran from sock_queue_rcv_skb(), which might be called _after_ backlog queuing if socket is owned by user by the time packet is processed by softirq handler. Fixes: b4b9e355 ("netvm: set PF_MEMALLOC as appropriate during SKB processing") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Pravin B Shelar authored
[ Upstream commit 31b33dfb ] Earlier patch 6ae459bd tried to detect void ckecksum partial skb by comparing pull length to checksum offset. But it does not work for all cases since checksum-offset depends on updates to skb->data. Following patch fixes it by validating checksum start offset after skb-data pointer is updated. Negative value of checksum offset start means there is no need to checksum. Fixes: 6ae459bd ("skbuff: Fix skb checksum flag on skb pull") Reported-by:
Andrew Vagin <avagin@odin.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Pravin B Shelar authored
[ Upstream commit 6ae459bd ] VXLAN device can receive skb with checksum partial. But the checksum offset could be in outer header which is pulled on receive. This results in negative checksum offset for the skb. Such skb can cause the assert failure in skb_checksum_help(). Following patch fixes the bug by setting checksum-none while pulling outer header. Following is the kernel panic msg from old kernel hitting the bug. ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1906! RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150 Call Trace: <IRQ> [<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch] [<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch] [<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch] [<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch] [<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch] [<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch] [<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0 [<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0 [<ffffffff8157ba7a>] udp_rcv+0x1a/0x20 [<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280 [<ffffffff81550128>] ip_local_deliver+0x88/0x90 [<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370 [<ffffffff81550365>] ip_rcv+0x235/0x300 [<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620 [<ffffffff8151c360>] netif_receive_skb+0x80/0x90 [<ffffffff81459935>] virtnet_poll+0x555/0x6f0 [<ffffffff8151cd04>] net_rx_action+0x134/0x290 [<ffffffff810683d8>] __do_softirq+0xa8/0x210 [<ffffffff8162fe6c>] call_softirq+0x1c/0x30 [<ffffffff810161a5>] do_softirq+0x65/0xa0 [<ffffffff810687be>] irq_exit+0x8e/0xb0 [<ffffffff81630733>] do_IRQ+0x63/0xe0 [<ffffffff81625f2e>] common_interrupt+0x6e/0x6e Reported-by:
Anupam Chanda <achanda@vmware.com> Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Andrey Vagin authored
[ Upstream commit e9193d60 ] Now send with MSG_PEEK can return data from multiple SKBs. Unfortunately we take into account the peek offset for each skb, that is wrong. We need to apply the peek offset only once. In addition, the peek offset should be used only if MSG_PEEK is set. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Aaron Conole <aconole@bytheb.org> Fixes: 9f389e35 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Signed-off-by:
Andrey Vagin <avagin@openvz.org> Tested-by:
Aaron Conole <aconole@bytheb.org> Signed-off-by:
-
Aaron Conole authored
[ Upstream commit 9f389e35 ] AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag is set. This is referenced in kernel bugzilla #12323 @ https://bugzilla.kernel.org/show_bug.cgi?id=12323 As described both in the BZ and lkml thread @ http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an AF_UNIX socket only reads a single skb, where the desired effect is to return as much skb data has been queued, until hitting the recv buffer size (whichever comes first). The modified MSG_PEEK path will now move to the next skb in the tree and jump to the again: label, rather than following the natural loop structure. This requires duplicating some of the loop head actions. This was tested using the python socketpair python code attached to the bugzilla issue. Signed-off-by:
-
Aaron Conole authored
[ Upstream commit 4613012d ] As suggested by Eric Dumazet this change replaces the #define with a static inline function to enjoy complaints by the compiler when misusing the API. Signed-off-by:
-
Alexander Couzens authored
[ Upstream commit 06a15f51 ] There is a small chance that tunnel_free() is called before tunnel->del_work scheduled resulting in a zero pointer dereference. Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> Acked-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Christoph Hellwig authored
commit 15e3d5a2 upstream. 3w controller don't dma map small single SGL entry commands but instead bounce buffer them. Add a helper to identify these commands and don't call scsi_dma_unmap for them. Based on an earlier patch from James Bottomley. Fixes: 118c85 ("3w-9xxx: fix command completion race") Reported-by:
Tóth Attila <atoth@atoth.sote.hu> Tested-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Joonsoo Kim authored
commit 03a2d2a3 upstream. Commit description is copied from the original post of this bug: http://comments.gmane.org/gmane.linux.kernel.mm/135349 Kernels after v3.9 use kmalloc_size(INDEX_NODE + 1) to get the next larger cache size than the size index INDEX_NODE mapping. In kernels 3.9 and earlier we used malloc_sizes[INDEX_L3 + 1].cs_size. However, sometimes we can't get the right output we expected via kmalloc_size(INDEX_NODE + 1), causing a BUG(). The mapping table in the latest kernel is like: index = {0, 1, 2 , 3, 4, 5, 6, n} size = {0, 96, 192, 8, 16, 32, 64, 2^n} The mapping table before 3.10 is like this: index = {0 , 1 , 2, 3, 4 , 5 , 6, n} size = {32, 64, 96, 128, 192, 256, 512, 2^(n+3)} The problem on my mips64 machine is as follows: (1) When configured DEBUG_SLAB && DEBUG_PAGEALLOC && DEBUG_LOCK_ALLOC && DEBUG_SPINLOCK, the sizeof(struct kmem_cache_node) will be "150", and the macro INDEX_NODE turns out to be "2": #define INDEX_NODE kmalloc_index(sizeof(struct kmem_cache_node)) (2) Then the result of kmalloc_size(INDEX_NODE + 1) is 8. (3) Then "if(size >= kmalloc_size(INDEX_NODE + 1)" will lead to "size = PAGE_SIZE". (4) Then "if ((size >= (PAGE_SIZE >> 3))" test will be satisfied and "flags |= CFLGS_OFF_SLAB" will be covered. (5) if (flags & CFLGS_OFF_SLAB)" test will be satisfied and will go to "cachep->slabp_cache = kmalloc_slab(slab_size, 0u)", and the result here may be NULL while kernel bootup. (6) Finally,"BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));" causes the BUG info as the following shows (may be only mips64 has this problem): This patch fixes the problem of kmalloc_size(INDEX_NODE + 1) and removes the BUG by adding 'size >= 256' check to guarantee that all necessary small sized slabs are initialized regardless sequence of slab size in mapping table. Fixes: e3366016 ("slab: Use common kmalloc_index/kmalloc_size...") Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by:
Liuhailong <liu.hailong6@zte.com.cn> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
covici@ccs.covici.com authored
commit b1d562ac upstream. Here is a patch to make speakup-r work again. It broke in 3.6 due to commit 4369c64c "Input: Send events one packet at a time) The problem was that the fakekey.c routine to fake a down arrow no longer functioned properly and putting the input_sync fixed it. Fixes: 4369c64cAcked-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
John Covici <covici@ccs.covici.com> Signed-off-by:
-
Joe Thornber authored
commit 2bffa150 upstream. The cleaner policy doesn't make use of the per cache block hint space in the metadata (unlike the other policies). When switching from the cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block) was observed. The crash was caused by bugs in dm-cache-metadata.c when trying to skip creation of the hint btree. The minimal fix is to change hint size for the cleaner policy to 4 bytes (only hint size supported). Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 95c2b175 upstream. Per-IRQ directories in procfs are created only when a handler is first added to the irqdesc, not when the irqdesc is created. In the case of a shared IRQ, multiple tasks can race to create a directory. This race condition seems to have been present forever, but is easier to hit with async probing. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Link: http://lkml.kernel.org/r/1443266636.2004.2.camel@decadent.org.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andreas Schwab authored
commit 8474ba74 upstream. Make sure the compiler does not modify arguments of syscall functions. This can happen if the compiler generates a tailcall to another function. For example, without asmlinkage_protect sys_openat is compiled into this function: sys_openat: clr.l %d0 move.w 18(%sp),%d0 move.l %d0,16(%sp) jbra do_sys_open Note how the fourth argument is modified in place, modifying the register %d4 that gets restored from this stack slot when the function returns to user-space. The caller may expect the register to be unmodified across system calls. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Mark Salyzyn authored
commit 569ba74a upstream. This is the arm64 portion of commit 45cac65b ("readahead: fault retry breaks mmap file read random detection"), which was absent from the initial port and has since gone unnoticed. The original commit says: > .fault now can retry. The retry can break state machine of .fault. In > filemap_fault, if page is miss, ra->mmap_miss is increased. In the second > try, since the page is in page cache now, ra->mmap_miss is decreased. And > these are done in one fault, so we can't detect random mmap file access. > > Add a new flag to indicate .fault is tried once. In the second try, skip > ra->mmap_miss decreasing. The filemap_fault state machine is ok with it. With this change, Mark reports that: > Random read improves by 250%, sequential read improves by 40%, and > random write by 400% to an eMMC device with dm crypto wrapped around it. Cc: Shaohua Li <shli@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
Riley Andrews <riandrews@android.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
shengyong authored
commit 7c7feb2e upstream. UBI: attaching mtd1 to ubi0 UBI: scanning is finished UBI error: init_volumes: not enough PEBs, required 706, available 686 UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1) UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM UBI error: ubi_init: cannot attach mtd1 If available PEBs are not enough when initializing volumes, return -ENOSPC directly. If available PEBs are not enough when initializing WL, return -ENOSPC instead of -ENOMEM. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
David Gstir <david@sigma-star.at> Signed-off-by:
-
Richard Weinberger authored
commit 281fda27 upstream. Make sure that data_size is less than LEB size. Otherwise a handcrafted UBI image is able to trigger an out of bounds memory access in ubi_compare_lebs(). Signed-off-by:
-
James Hogan authored
commit 53960059 upstream. If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32 zone, as is the case for some 32-bit kernels, then massage_gfp_flags() will cause DMA memory allocated for devices with a 32..63-bit coherent_dma_mask to fall back to using __GFP_DMA, even though there may only be 32-bits of physical address available anyway. Correct that case to compare against a mask the size of phys_addr_t instead of always using a 64-bit mask. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Fixes: a2e715a8 ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9610/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Yao-Wen Mao authored
commit 8484bf29 upstream. These two headphones need a reset-resume quirk to properly resume to original volume level. Signed-off-by:
Yao-Wen Mao <yaowen@google.com> Signed-off-by:
-
Vincent Palatin authored
commit 72194739 upstream. Add a device quirk for the Logitech PTZ Pro Camera and its sibling the ConferenceCam CC3000e Camera. This fixes the failed camera enumeration on some boot, particularly on machines with fast CPU. Tested by connecting a Logitech PTZ Pro Camera to a machine with a Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles while recording the kernel logs and taking camera picture after each boot. Before the patch, more than 7% of the boots show some enumeration transfer failures and in a few of them, the kernel is giving up before actually enumerating the webcam. After the patch, the enumeration has been correct on every reboot. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Signed-off-by:
-
Mathias Nyman authored
commit ff30cbc8 upstream. Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Jann Horn authored
commit b7f76ea2 upstream. Signed-off-by:
Jann Horn <jann@thejh.net> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Mark Brown authored
commit 176fc2d5 upstream. The in kernel snprintf() will conveniently return the actual length of the printed string even if not given an output beffer at all so just do that rather than relying on the user to pass in a suitable buffer, ensuring that we don't need to worry if the buffer was truncated due to the size of the buffer passed in. Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mark Brown authored
commit b763ec17 upstream. If a read is attempted which is smaller than the line length then we may underflow the subtraction we're doing with the unsigned size_t type so move some of the calculation to be additions on the right hand side instead in order to avoid this. Reported-by:
-
Peter Seiderer authored
commit 98ce94c8 upstream. Linux cifs mount with ntlmssp against an Mac OS X (Yosemite 10.10.5) share fails in case the clocks differ more than +/-2h: digest-service: digest-request: od failed with 2 proto=ntlmv2 digest-service: digest-request: kdc failed with -1561745592 proto=ntlmv2 Fix this by (re-)using the given server timestamp for the ntlmv2 authentication (as Windows 7 does). A related problem was also reported earlier by Namjae Jaen (see below): Windows machine has extended security feature which refuse to allow authentication when there is time difference between server time and client time when ntlmv2 negotiation is used. This problem is prevalent in embedded enviornment where system time is set to default 1970. Modern servers send the server timestamp in the TargetInfo Av_Pair structure in the challenge message [see MS-NLMP 2.2.2.1] In [MS-NLMP 3.1.5.1.2] it is explicitly mentioned that the client must use the server provided timestamp if present OR current time if it is not Reported-by:
Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
Peter Seiderer <ps.report@gmx.net> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Julian Anastasov authored
commit 56184858 upstream. Fix crash in 3.5+ if FTP is used after switching sync_version to 0. Fixes: 749c42b6 ("ipvs: reduce sync rate with time thresholds") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Julian Anastasov authored
commit 4754957f upstream. Michael Vallaly reports about wrong source address used in rare cases for tunneled traffic. Looks like __ip_vs_get_out_rt in 3.10+ is providing uninitialized dest_dst->dst_saddr.ip because ip_vs_dest_dst_alloc uses kmalloc. While we retry after seeing EINVAL from routing for data that does not look like valid local address, it still succeeded when this memory was previously used from other dests and with different local addresses. As result, we can use valid local address that is not suitable for our real server. Fix it by providing 0.0.0.0 every time our cache is refreshed. By this way we will get preferred source address from routing. Reported-by:
Michael Vallaly <lvs@nolatency.com> Fixes: 026ace06 ("ipvs: optimize dst usage for real server") Signed-off-by:
-
Linus Torvalds authored
commit b9a53227 upstream. As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before having initialized the IPC object state. Yes, we initialize the IPC object in a locked state, but with all the lockless RCU lookup work, that IPC object lock no longer means that the state cannot be seen. We already did this for the IPC semaphore code (see commit e8577d1f: "ipc/sem.c: fully initialize sem_array before making it visible") but we clearly forgot about msg and shm. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Reyad Attiyat authored
commit 4758dcd1 upstream. This commit checks for the URB_ZERO_PACKET flag and creates an extra zero-length td if the urb transfer length is a multiple of the endpoint's max packet length. Signed-off-by:
Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by:
-
Mathias Nyman authored
commit dca77945 upstream. Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Signed-off-by:
-
Roger Quadros authored
commit e5bfeab0 upstream. For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Johan Hovold authored
commit cbb4be65 upstream. Fix potential null-pointer dereference at probe by making sure that the required endpoints are present. The whiteheat driver assumes there are at least five pairs of bulk endpoints, of which the final pair is used for the "command port". An attempt to bind to an interface with fewer bulk endpoints would currently lead to an oops. Fixes CVE-2015-5257. Reported-by:
Moein Ghasemzadeh <moein@istuary.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniel Vetter authored
commit da168d81 upstream. I've done some extensive history digging across libdrm, mesa and xf86-video-{intel,nouveau,ati}. The only potential user of this with kms drivers I could find was ttmtest, which once used drmGetLock still. But that mistake was quickly fixed up. Even the intel xvmc library (which otherwise was really good with using dri1 stuff in kms mode) managed to never take the hw lock for dri2 (and hence kms). Hence it should be save to unconditionally disallow this. Cc: Peter Antoine <peter.antoine@intel.com> Reviewed-by:
Peter Antoine <peter.antoine@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Fabiano Fidêncio authored
commit 8d0d9401 upstream. When disabling/enabling a crtc the primary area must be updated independently of which crtc has been disabled/enabled. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264735Signed-off-by:
Fabiano Fidêncio <fidencio@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit 69e5d3f8 upstream. If the server isn't new enough to give us state, report the first monitor as always connected, otherwise believe the server side. Signed-off-by:
-
Steve French authored
commit e0ddde9d upstream. leases (oplocks) were always requested for SMB2/SMB3 even when oplocks disabled in the cifs.ko module. Signed-off-by:
Steve French <steve.french@primarydata.com> Reviewed-by:
Chandrika Srinivasan <chandrika.srinivasan@citrix.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 95dd8653 upstream. We have to put back the references to the master conntrack and the expectation that we just created, otherwise we'll leak them. Fixes: 0ef71ee1 ("netfilter: ctnetlink: refactor ctnetlink_create_expect") Reported-by:
Tim Wiess <Tim.Wiess@watchguard.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Joe Stringer authored
commit 4b31814d upstream. When zones were originally introduced, the expectation functions were all extended to perform lookup using the zone. However, insertion was not modified to check the zone. This means that two expectations which are intended to apply for different connections that have the same tuple but exist in different zones cannot both be tracked. Fixes: 5d0aa2cc (netfilter: nf_conntrack: add support for "conntrack zones") Signed-off-by:
Joe Stringer <joestringer@nicira.com> Signed-off-by:
-
Mikulas Patocka authored
commit 042745ee upstream. Commit 3a0f9aae ("dm raid: round region_size to power of two") intended to make sure that the default region size is a power of two. However, the logic in that commit is incorrect and sets the variable region_size to 0 or 1, depending on whether min_region_size is a power of two. Fix this logic, using roundup_pow_of_two(), so that region_size is properly rounded up to the next power of two. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: 3a0f9aae ("dm raid: round region_size to power of two") Signed-off-by:
-
Liu.Zhao authored
commit 19ab6bc5 upstream. This is intended to add ZTE device PIDs on kernel. Signed-off-by:
Liu.Zhao <lzsos369@163.com> [johan: sort the new entries ] Signed-off-by:
-
Joe Thornber authored
commit b0dc3c8b upstream. When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by:
-
