- 20 Feb, 2019 35 commits
-
-
Dmitry Torokhov authored
commit f420c54e upstream. This reverts commit 7db54c89 as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Milian Wolff authored
commit 5ea0416f upstream. So far the whole stack was thrown away when any error occurred before the maximum stack depth was unwound. This is actually a very common scenario though. The stacks that got unwound so far are still interesting. This removes a large chunk of differences when comparing perf script output for libunwind and libdw perf unwinding. E.g. with libunwind: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) 192ca mmap64 (/usr/lib/ld-2.25.so) 59a9 _dl_map_object_from_fd (/usr/lib/ld-2.25.so) 83d0 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) heaptrack_gui 2228 135073.388677: 611329 cycles: 1a3e0 strcmp (/usr/lib/ld-2.25.so) 82b2 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) ~~~~~ With libdw without this patch: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) heaptrack_gui 2228 135073.388677: 611329 cycles: ~~~~~ With this patch applied, the libdw unwinder will produce the same output as the libunwind unwinder. Signed-off-by:
Nikson Kanti Paul <nikson@amazon.com> Signed-off-by:
Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20170601210021.20046-1-milian.wolff@kdab.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Amit Shah <aams@amazon.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> # 4.9 Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ross Lagerwall authored
[ Upstream commit 92a8109e ] The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit df209c43 ] devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b6 ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit b5f03484 ] These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Julien D'Ascenzio <jdascenzio@posteo.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Jamie Lentin <jm@lentin.co.uk> Reported-by:
Julien D'Ascenzio <jdascenzio@posteo.net> Tested-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit c25748ac ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 7fca69d4 ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 7923e09c ] The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 51b9e62e ] The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 9a63bd6f ] Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 4d9d54a7 ] PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit adf41098 ] DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 2f661962 ] cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Chao Fan authored
[ Upstream commit b9ced18a ] The addresses of NUMA nodes are not printed correctly on i386-PAE which is misleading. Here is a debian9-32bit with PAE in a QEMU guest having more than 4G of memory: qemu-system-i386 \ -hda /var/lib/libvirt/images/debian32.qcow2 \ -m 5G \ -enable-kvm \ -smp 10 \ -numa node,mem=512M,nodeid=0,cpus=0 \ -numa node,mem=512M,nodeid=1,cpus=1 \ -numa node,mem=512M,nodeid=2,cpus=2 \ -numa node,mem=512M,nodeid=3,cpus=3 \ -numa node,mem=512M,nodeid=4,cpus=4 \ -numa node,mem=512M,nodeid=5,cpus=5 \ -numa node,mem=512M,nodeid=6,cpus=6 \ -numa node,mem=512M,nodeid=7,cpus=7 \ -numa node,mem=512M,nodeid=8,cpus=8 \ -numa node,mem=512M,nodeid=9,cpus=9 \ -serial stdio Because of the wrong value type, it prints as below: [ 0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled [ 0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled [ 0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled [ 0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled The upper half of the start address of the NUMA domains between 6 and 9 inclusive was cut, so the printed values are incorrect. Fix the value type, to get the correct values in the log as follows: [ 0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled [ 0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled [ 0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled [ 0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled Signed-off-by:
Chao Fan <fanc.fnst@cn.fujitsu.com> [ rjw: Subject & changelog ] Signed-off-by:
-
Daniel Axtens authored
commit 8914a595 upstream If a bnx2x card is passed a GSO packet with a gso_size larger than ~9700 bytes, it will cause a firmware error that will bring the card down: bnx2x: [bnx2x_attn_int_deasserted3:4323(enP24p1s0f0)]MC assert! bnx2x: [bnx2x_mc_assert:720(enP24p1s0f0)]XSTORM_ASSERT_LIST_INDEX 0x2 bnx2x: [bnx2x_mc_assert:736(enP24p1s0f0)]XSTORM_ASSERT_INDEX 0x0 = 0x00000000 0x25e43e47 0x00463e01 0x00010052 bnx2x: [bnx2x_mc_assert:750(enP24p1s0f0)]Chip Revision: everest3, FW Version: 7_13_1 ... (dump of values continues) ... Detect when the mac length of a GSO packet is greater than the maximum packet size (9700 bytes) and disable GSO. Signed-off-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [jwang: cherry pick for CVE-2018-1000026] Signed-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Daniel Axtens authored
commit 2b16f048 upstream If you take a GSO skb, and split it into packets, will the MAC length (L2 + L3 + L4 headers + payload) of those packets be small enough to fit within a given length? Move skb_gso_mac_seglen() to skbuff.h with other related functions like skb_gso_network_seglen() so we can use it, and then create skb_gso_validate_mac_len to do the full calculation. Signed-off-by:
-
Russell King authored
Commit d6951f58 upstream. The intention in the previous patch was to only place the processor tables in the .rodata section if big.Little was being built and we wanted the branch target hardening, but instead (due to the way it was tested) it ended up always placing the tables into the .rodata section. Although harmless, let's correct this anyway. Fixes: 3a4d0c21 ("ARM: ensure that processor vtables is not lost after boot") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David A. Long <dave.long@linaro.org> Reviewed-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
-
Russell King authored
Commit 3a4d0c21 upstream. Marek Szyprowski reported problems with CPU hotplug in current kernels. This was tracked down to the processor vtables being located in an init section, and therefore discarded after kernel boot, despite being required after boot to properly initialise the non-boot CPUs. Arrange for these tables to end up in .rodata when required. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Fixes: 383fb3ee ("ARM: spectre-v2: per-CPU vtables to work around big.Little systems") Signed-off-by:
-
Russell King authored
Commit 383fb3ee upstream. In big.Little systems, some CPUs require the Spectre workarounds in paths such as the context switch, but other CPUs do not. In order to handle these differences, we need per-CPU vtables. We are unable to use the kernel's per-CPU variables to support this as per-CPU is not initialised at times when we need access to the vtables, so we have to use an array indexed by logical CPU number. We use an array-of-pointers to avoid having function pointers in the kernel's read/write .data section. Note: Added include of linux/slab.h in arch/arm/smp.c. Reviewed-by:
-
Russell King authored
Commit e209950f upstream. Allow the way we access members of the processor vtable to be changed at compile time. We will need to move to per-CPU vtables to fix the Spectre variant 2 issues on big.Little systems. However, we have a couple of calls that do not need the vtable treatment, and indeed cause a kernel warning due to the (later) use of smp_processor_id(), so also introduce the PROC_TABLE macro for these which always use CPU 0's function pointers. Reviewed-by:
-
Russell King authored
Commit 945aceb1 upstream. Call the per-processor type check_bugs() method in the same way as we do other per-processor functions - move the "processor." detail into proc-fns.h. Reviewed-by:
-
Russell King authored
Commit 65987a85 upstream. Split out the lookup of the processor type and associated error handling from the rest of setup_processor() - we will need to use this in the secondary CPU bringup path for big.Little Spectre variant 2 mitigation. Reviewed-by:
-
Russell King authored
Commit 899a42f8 upstream. Move lookup_processor_type() out of the __init section so it is callable from (eg) the secondary startup code during hotplug. Reviewed-by:
-
Julien Thierry authored
Commit 5df7a99b upstream. In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to itself. It should actually be hwstate->fpinst2 that gets assigned to the ufp_exc field. Fixes commit 3aa2df6e ("ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state"). Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Julien Thierry authored
Commit a1d09e07 upstream. Sanitize user pointer given to __copy_to_user, both for standard version and memcopy version of the user accessor. Signed-off-by:
-
Julien Thierry authored
Commit afaf6838 upstream. Introduce C and asm helpers to sanitize user address, taking the address range they target into account. Use asm helper for existing sanitization in __copy_from_user(). Signed-off-by:
-
Julien Thierry authored
Commit e3aa6243 upstream. When Spectre mitigation is required, __put_user() needs to include check_uaccess. This is already the case for put_user(), so just make __put_user() an alias of put_user(). Signed-off-by:
-
Julien Thierry authored
Commit 621afc67 upstream. A mispredicted conditional call to set_fs could result in the wrong addr_limit being forwarded under speculation to a subsequent access_ok check, potentially forming part of a spectre-v1 attack using uaccess routines. This patch prevents this forwarding from taking place, but putting heavy barriers in set_fs after writing the addr_limit. Porting commit c2f0ad4f ("arm64: uaccess: Prevent speculative use of the current addr_limit"). Signed-off-by:
-
Julien Thierry authored
Commit 18ea66bd upstream. With Spectre-v1.1 mitigations, __put_user_error is pointless. In an attempt to remove it, replace its references in frame setups with __put_user. Signed-off-by:
-
Julien Thierry authored
Commit 31950890 upstream. Copy events to user using __copy_to_user() rather than copy members of individually with __put_user_error(). This has the benefit of disabling/enabling PAN once per event intead of once per event member. Signed-off-by:
-
Julien Thierry authored
Commit 3aa2df6e upstream. Use __copy_to_user() rather than __put_user_error() for individual members when saving VFP state. This has the benefit of disabling/enabling PAN once per copied struct intead of once per write. Signed-off-by:
-
Julien Thierry authored
Commit 5ca451cf upstream. When saving the ARM integer registers, use __copy_to_user() to copy them into user signal frame, rather than __put_user_error(). This has the benefit of disabling/enabling PAN once for the whole copy intead of once per write. Signed-off-by:
-
Hauke Mehrtens authored
commit 6926e041 upstream. Musl provides its own ethhdr struct definition. Add a guard to prevent its definition of the appropriate musl header has already been included. glibc does not implement this header, but when glibc will implement this they can just define __UAPI_DEF_ETHHDR 0 to make it work with the kernel. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Adrian Bunk authored
commit 37cf28d3 upstream. Works with ST M24M02. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
Adrian Bunk authored
commit 6c0c5dc3 upstream. Add new compatible to the device tree bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 15 Feb, 2019 5 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit cb5b020a upstream. This reverts commit 8099b047. It turns out that people do actually depend on the shebang string being truncated, and on the fact that an interpreter (like perl) will often just re-interpret it entirely to get the full argument list. Reported-by:
Samuel Dionne-Riel <samuel@dionne-riel.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Sven Eckelmann authored
commit 9114daa8 upstream. The caller of ndo_start_xmit may not already have called skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr therefore can be in the wrong position and even outside the current skbuff. This for example happens when the user binds to the device using a PF_PACKET-SOCK_RAW with enabled qdisc-bypass: int opt = 4; setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt)); Since eth_hdr is used all over the codebase, the batadv_interface_tx function must always take care of resetting it. Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Sven Eckelmann authored
commit 955d3411 upstream. It is not allowed to use WARN* helpers on potential incorrect input from the user or transient problems because systems configured as panic_on_warn will reboot due to such a problem. A NULL return value of __dev_get_by_index can be caused by various problems which can either be related to the system configuration or problems (incorrectly returned network namespaces) in other (virtual) net_device drivers. batman-adv should not cause a (harmful) WARN in this situation and instead only report it via a simple message. Fixes: b7eddd0b ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Reported-by: syzbot+c764de0fcfadca9a8595@syzkaller.appspotmail.com Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
