Pull tile updates from Chris Metcalf:
 "This includes secure computing support as well as miscellaneous minor
  improvements"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: correct some typos in opcode type names
  tile/vdso: emit a GNU hash as well
  tile: Remove finish_arch_switch
  tile: enable full SECCOMP support
  tile/time: Migrate to new 'set-state' interface

Pull arm64 updates from Will Deacon:

 - Support for new architectural features introduced in ARMv8.1:
   * Privileged Access Never (PAN) to catch user pointer dereferences in
     the kernel
   * Large System Extension (LSE) for building scalable atomics and locks
     (depends on locking/arch-atomic from tip, which is included here)
   * Hardware Dirty Bit Management (DBM) for updating clean PTEs
     automatically

 - Move our PSCI implementation out into drivers/firmware/, where it can
   be shared with arch/arm/. RMK has also pulled this component branch
   and has additional patches moving arch/arm/ over. MAINTAINERS is
   updated accordingly.

 - Better BUG implementation based on the BRK instruction for trapping

 - Leaf TLB invalidation for unmapping user pages

 - Support for PROBE_ONLY PCI configurations

 - Various cleanups and non-critical fixes, including:
   * Always flush FP/SIMD state over exec()
   * Restrict memblock additions based on range of linear mapping
   * Ensure *(LIST_POISON) generates a fatal fault
   * Context-tracking syscall return no longer corrupts return value when
     not forced on.
   * Alternatives patching synchronisation/stability improvements
   * Signed sub-word cmpxchg compare fix (tickled by HAVE_CMPXCHG_LOCAL)
   * Force SMP=y
   * Hide direct DCC access from userspace
   * Fix EFI stub memory allocation when DRAM starts at 0x0

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  arm64: flush FP/SIMD state correctly after execve()
  arm64: makefile: fix perf_callchain.o kconfig dependency
  arm64: set MAX_MEMBLOCK_ADDR according to linear region size
  of/fdt: make memblock maximum physical address arch configurable
  arm64: Fix source code file path in comments
  arm64: entry: always restore x0 from the stack on syscall return
  arm64: mdscr_el1: avoid exposing DCC to userspace
  arm64: kconfig: Move LIST_POISON to a safe value
  arm64: Add __exception_irq_entry definition for function graph
  arm64: mm: ensure patched kernel text is fetched from PoU
  arm64: alternatives: ensure secondary CPUs execute ISB after patching
  arm64: make ll/sc __cmpxchg_case_##name asm consistent
  arm64: dma-mapping: Simplify pgprot handling
  arm64: restore cpu suspend/resume functionality
  ARM64: PCI: do not enable resources on PROBE_ONLY systems
  arm64: cmpxchg: truncate sub-word signed types before comparison
  arm64: alternative: put secondary CPUs into polling loop during patch
  arm64/Documentation: clarify wording regarding memory below the Image
  arm64: lse: fix lse cmpxchg code indentation
  arm64: remove redundant object file list
  ...

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.3 for MIPS.  Here's the summary:

  Three fixes that didn't make 4.2-stable:

   - a -Os build might compile the kernel using the MIPS16 instruction
     set but the R2 optimized inline functions in <uapi/asm/swab.h> are
     implemented using 32-bit wide instructions which is invalid.

   - a build error in pgtable-bits.h for a particular kernel
     configuration.

   - accessing registers of the CM GCR might have been compiled to use
     64 bit accesses but these registers are onl 32 bit wide.

  And also a few new bits:

   - move the ATH79 GPIO driver to drivers/gpio

   - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h,
     change ATH79 accordingly.

   - fix definition of pgprot_writecombine

   - add an implementation of dma_map_ops.mmap

   - fix alignment of quiet build output for vmlinuz link

   - BCM47xx: Use kmemdup rather than duplicating its implementation

   - Netlogic: Fix 0x0x prefixes of constants.

   - merge Bjorn Helgaas' series to remove most of the weak keywords
     from function declarations.

   - CP0 and CP1 registers are best considered treated as unsigned
     values to avoid large values from becoming negative values.

   - improve support for the MIPS GIC timer.

   - enable common clock framework for Malta and SEAD3.

   - a number of improvments and fixes to dump_tlb().

   - document the MIPS TLB dump functionality in Magic SysRq.

   - Cavium Octeon CN68XX improvments.

   - NetLogic improvments.

   - irq: Use access helper irq_data_get_affinity_mask.

   - handle MSA unaligned accesses.

   - a number of R6-related math-emu fixes.

   - support for I6400.

   - improvments to MSA support.

   - add uprobes support.

   - move from deprecated __initcall to arch_initcall.

   - remove finish_arch_switch().

   - IRQ cleanups by Thomas Gleixner.

   - migrate to new 'set-state' interface.

   - random small cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits)
  MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16.
  MIPS: Fix alignment of quiet build output for vmlinuz link
  MIPS: math-emu: Remove unused handle_dsemul function declaration
  MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
  MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
  MIPS: inst.h: Add new MIPS R6 FPU opcodes
  MIPS: Octeon: Fix management port MII address on Kontron S1901
  MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation
  STAGING: Octeon: Use common helpers for determining interface and port
  MIPS: Octeon: Support interfaces 4 and 5
  MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports
  MIPS: Octeon: Initialize CN68XX PKO
  STAGING: Octeon: Support CN68XX style WQE
  ...

Pull powerpc updates from Michael Ellerman:

 - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
   from Benjamin Herrenschmidt

 - EEH fixes for SRIOV from Gavin

 - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth

 - use hardware RNG for arch_get_random_seed_* not arch_get_random_*
   from Paul Mackerras

 - seccomp filter support from Michael Ellerman

 - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
   Salgaonkar

 - add powerpc timebase as a trace clock source from Naveen N.  Rao

 - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual

 - add an inline function to update POWER8 HID0 from Gautham R.  Shenoy

 - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman

 - drop support for 64K local store on 4K kernels from Michael Ellerman

 - move dma_get_required_mask() from pnv_phb to pci_controller_ops from
   Andrew Donnellan

 - initialize distance lookup table from drconf path from Nikunj A
   Dadhania

 - enable RTC class support from Vaibhav Jain

 - disable automatically blocked PCI config from Gavin Shan

 - add LEDs driver for PowerNV platform from Vasant Hegde

 - fix endianness issues in the HVSI driver from Laurent Dufour

 - kexec endian fixes from Samuel Mendoza-Jonas

 - fix corrupted pdn list from Gavin Shan

 - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan

 - Freescale updates from Scott: Highlights include 32-bit memcpy/memset
   optimizations, checksum optimizations, 85xx config fragments and
   updates, device tree updates, e6500 fixes for non-SMP, and misc
   cleanup and minor fixes.

 - a ton of cxl updates & fixes:
    - add explicit precision specifiers from Rasmus Villemoes
    - use more common format specifier from Rasmus Villemoes
    - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
    - destroy afu->contexts_idr on release of an afu from Johannes
      Thumshirn
    - compile with -Werror from Daniel Axtens
    - EEH support from Daniel Axtens
    - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
    - add alternate MMIO error handling from Ian Munsie
    - allow release of contexts which have been OPENED but not STARTED
      from Andrew Donnellan
    - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
    - release irqs if memory allocation fails from Vaibhav Jain
    - remove racy attempt to force EEH invocation in reset from Daniel
      Axtens
    - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
    - fix force unmapping mmaps of contexts allocated through the kernel
      api from Ian Munsie
    - set up and enable PSL Timebase from Philippe Bergheaud

* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
  cxl: Set up and enable PSL Timebase
  cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
  cxl: Fix + cleanup error paths in cxl_dev_context_init
  powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
  powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
  powerpc/pseries: Fix corrupted pdn list
  powerpc/powernv: Enable LEDS support
  powerpc/iommu: Set default DMA offset in dma_dev_setup
  cxl: Remove racy attempt to force EEH invocation in reset
  cxl: Release irqs if memory allocation fails
  cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
  powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
  powerpc/powernv: Reset HILE before kexec_sequence()
  powerpc/kexec: Reset secondary cpu endianness before kexec
  powerpc/hvsi: Fix endianness issues in the HVSI driver
  leds/powernv: Add driver for PowerNV platform
  powerpc/powernv: Create LED platform device
  powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
  powerpc/powernv: Fix the log message when disabling VF
  cxl: Allow release of contexts which have been OPENED but not STARTED
  ...

Pull ARM pcmcia updates from Russell King:
 "A series of changes updating the PXA and SA11x0 PCMCIA code to use
  devm_* APIs, and resolve some resource leaks in doing so.  This
  results in a few small cleanups which are included in this set.

  FYI, the recommit of these today is to add Robert Jarzmik's
  reviewed-by tags, which I'd forgotten to add from mid-July"

* 'pcmcia' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  pcmcia: soc_common: remove skt_dev_info's clk pointer
  pcmcia: sa11xx_base.c: remove useless init/exit functions
  pcmcia: sa1111: simplify clk handing in sa1111_pcmcia_add()
  pcmcia: sa1111: update socket driver to use devm_clk_get() API
  pcmcia: pxa2xx: convert memory allocation to devm_* API
  pcmcia: pxa2xx: update socket driver to use devm_clk_get() API
  pcmcia: sa11x0: convert memory allocation to devm_* API
  pcmcia: sa11x0: fix missing clk_put() in sa11x0 socket drivers

Pull ARM development updates from Russell King:
 "Included in this update:

   - moving PSCI code from ARM64/ARM to drivers/

   - removal of some architecture internals from global kernel view

   - addition of software based "privileged no access" support using the
     old domains register to turn off the ability for kernel
     loads/stores to access userspace.  Only the proper accessors will
     be usable.

   - addition of early fixup support for early console

   - re-addition (and reimplementation) of OMAP special interconnect
     barrier

   - removal of finish_arch_switch()

   - only expose cpuX/online in sysfs if hotpluggable

   - a number of code cleanups"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits)
  ARM: software-based priviledged-no-access support
  ARM: entry: provide uaccess assembly macro hooks
  ARM: entry: get rid of multiple macro definitions
  ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die()
  ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore()
  ARM: mm: improve do_ldrd_abort macro
  ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit()
  ARM: entry: efficiency cleanups
  ARM: entry: get rid of asm_trace_hardirqs_on_cond
  ARM: uaccess: simplify user access assembly
  ARM: domains: remove DOMAIN_TABLE
  ARM: domains: keep vectors in separate domain
  ARM: domains: get rid of manager mode for user domain
  ARM: domains: move initial domain setting value to asm/domains.h
  ARM: domains: provide domain_mask()
  ARM: domains: switch to keeping domain value in register
  ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE
  ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD()
  ARM: 8416/1: Feroceon: use of_iomap() to map register base
  ARM: 8415/1: early fixmap support for earlycon
  ...

Pull perf fixes from Ingo Molnar:
 "Tooling fixes plus a handful of late arriving tooling changes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix link time error with sample_reg_masks on non x86
  perf build: Fix Intel PT instruction decoder dependency problem
  perf dwarf: Fix potential array out of bounds access
  perf record: Add ability to name registers to record
  perf/x86: Add list of register names
  perf script: Enable printing of interrupted machine state
  perf evlist: Open event on evsel cpus and threads
  bpf tools: New API to get name from a BPF object
  perf tools: Fix build on powerpc broken by pt/bts

Pull locking and atomic updates from Ingo Molnar:
 "Main changes in this cycle are:

   - Extend atomic primitives with coherent logic op primitives
     (atomic_{or,and,xor}()) and deprecate the old partial APIs
     (atomic_{set,clear}_mask())

     The old ops were incoherent with incompatible signatures across
     architectures and with incomplete support.  Now every architecture
     supports the primitives consistently (by Peter Zijlstra)

   - Generic support for 'relaxed atomics':

       - _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
       - atomic_read_acquire()
       - atomic_set_release()

     This came out of porting qwrlock code to arm64 (by Will Deacon)

   - Clean up the fragile static_key APIs that were causing repeat bugs,
     by introducing a new one:

       DEFINE_STATIC_KEY_TRUE(name);
       DEFINE_STATIC_KEY_FALSE(name);

     which define a key of different types with an initial true/false
     value.

     Then allow:

       static_branch_likely()
       static_branch_unlikely()

     to take a key of either type and emit the right instruction for the
     case.  To be able to know the 'type' of the static key we encode it
     in the jump entry (by Peter Zijlstra)

   - Static key self-tests (by Jason Baron)

   - qrwlock optimizations (by Waiman Long)

   - small futex enhancements (by Davidlohr Bueso)

   - ... and misc other changes"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  jump_label/x86: Work around asm build bug on older/backported GCCs
  locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
  locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
  locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
  locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
  locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
  locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
  locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
  locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
  locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
  locking/static_keys: Make verify_keys() static
  jump label, locking/static_keys: Update docs
  locking/static_keys: Provide a selftest
  jump_label: Provide a self-test
  s390/uaccess, locking/static_keys: employ static_branch_likely()
  x86, tsc, locking/static_keys: Employ static_branch_likely()
  locking/static_keys: Add selftest
  locking/static_keys: Add a new static_key interface
  locking/static_keys: Rework update logic
  locking/static_keys: Add static_key_{en,dis}able() helpers
  ...

Pull f2fs updates from Jaegeuk Kim:
 "The major work includes fixing and enhancing the existing extent_cache
  feature, which has been well settling down so far and now it becomes a
  default mount option accordingly.

  Also, this version newly registers a f2fs memory shrinker to reclaim
  several objects consumed by a couple of data structures in order to
  avoid memory pressures.

  Another new feature is to add ioctl(F2FS_GARBAGE_COLLECT) which
  triggers a cleaning job explicitly by users.

  Most of the other patches are to fix bugs occurred in the corner cases
  across the whole code area"

* tag 'for-f2fs-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (85 commits)
  f2fs: upset segment_info repair
  f2fs: avoid accessing NULL pointer in f2fs_drop_largest_extent
  f2fs: update extent tree in batches
  f2fs: fix to release inode correctly
  f2fs: handle f2fs_truncate error correctly
  f2fs: avoid unneeded initializing when converting inline dentry
  f2fs: atomically set inode->i_flags
  f2fs: fix wrong pointer access during try_to_free_nids
  f2fs: use __GFP_NOFAIL to avoid infinite loop
  f2fs: lookup neighbor extent nodes for merging later
  f2fs: split __insert_extent_tree_ret for readability
  f2fs: kill dead code in __insert_extent_tree
  f2fs: adjust showing of extent cache stat
  f2fs: add largest/cached stat in extent cache
  f2fs: fix incorrect mapping for bmap
  f2fs: add annotation for space utilization of regular/inline dentry
  f2fs: fix to update cached_en of extent tree properly
  f2fs: fix typo
  f2fs: check the node block address of newly allocated nid
  f2fs: go out for insert_inode_locked failure
  ...

Pull dlm updates from David Teigland:
 "This set mainly includes a change to the way the dlm uses the SCTP API
  in the kernel, removing the direct dependency on the sctp module.
  Other odd SCTP-related fixes are also included.

  The other notable fix is for a long standing regression in the
  behavior of lock value blocks for user space locks"

* tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: print error from kernel_sendpage
  dlm: fix lvb copy for user locks
  dlm: sctp_accept_from_sock() can be static
  dlm: fix reconnecting but not sending data
  dlm: replace BUG_ON with a less severe handling
  dlm: use sctp 1-to-1 API
  dlm: fix not reconnecting on connecting error handling
  dlm: fix race while closing connections
  dlm: fix connection stealing if using SCTP

Pull ext4 updates from Ted Ts'o:
 "Pretty much all bug fixes and clean ups for 4.3, after a lot of
  features and other churn going into 4.2"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  Revert "ext4: remove block_device_ejected"
  ext4: ratelimit the file system mounted message
  ext4: silence a format string false positive
  ext4: simplify some code in read_mmp_block()
  ext4: don't manipulate recovery flag when freezing no-journal fs
  jbd2: limit number of reserved credits
  ext4 crypto: remove duplicate header file
  ext4: update c/mtime on truncate up
  jbd2: avoid infinite loop when destroying aborted journal
  ext4, jbd2: add REQ_FUA flag when recording an error in the superblock
  ext4 crypto: fix spelling typo in comment
  ext4 crypto: exit cleanly if ext4_derive_key_aes() fails
  ext4: reject journal options for ext2 mounts
  ext4: implement cgroup writeback support
  ext4: replace ext4_io_submit->io_op with ->io_wbc
  ext4 crypto: check for too-short encrypted file names
  ext4 crypto: use a jbd2 transaction when adding a crypto policy
  jbd2: speedup jbd2_journal_dirty_metadata()

Pull ext3 removal, quota & udf fixes from Jan Kara:
 "The biggest change in the pull is the removal of ext3 filesystem
  driver (~28k lines removed).  Ext4 driver is a full featured
  replacement these days and both RH and SUSE use it for several years
  without issues.  Also there are some workarounds in VM & block layer
  mainly for ext3 which we could eventually get rid of.

  Other larger change is addition of proper error handling for
  dquot_initialize().  The rest is small fixes and cleanups"

[ I wasn't convinced about the ext3 removal and worried about things
  falling through the cracks for legacy users, but ext4 maintainers
  piped up and were all unanimously in favor of removal, and maintaining
  all legacy ext3 support inside ext4.   - Linus ]

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Don't modify filesystem for read-only mounts
  quota: remove an unneeded condition
  ext4: memory leak on error in ext4_symlink()
  mm/Kconfig: NEED_BOUNCE_POOL: clean-up condition
  ext4: Improve ext4 Kconfig test
  block: Remove forced page bouncing under IO
  fs: Remove ext3 filesystem driver
  doc: Update doc about journalling layer
  jfs: Handle error from dquot_initialize()
  reiserfs: Handle error from dquot_initialize()
  ocfs2: Handle error from dquot_initialize()
  ext4: Handle error from dquot_initialize()
  ext2: Handle error from dquot_initalize()
  quota: Propagate error from ->acquire_dquot()

Merge hpfs upddate from Mikulas Patocka.

* emailed patches from Mikulas Patocka <mikulas@twibright.com>:
  hpfs: update ctime and mtime on directory modification
  hpfs: support hotfixes

Update ctime and mtime when a directory is modified. (though OS/2 doesn't
update them anyway)
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org	# v3.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the OS/2 driver hits a disk write error, it writes the sector to
another location and adds the sector mapping to the hotfix map.

This patch makes the hpfs driver understand the hotfix map and remap
accesses accoring to it.
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

We no longer need to store the clk pointer in struct skt_dev_info as we
no longer need to remember the clk pointer for the cleanup paths.
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

A library module is not required to have module init/exit functions.
Get rid of these unnecessary functions.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

clk_get(dev, NULL) will always refer to the same clock, so it's
pointless calling this multiple times for the same device.  As we no
longer have to worry about the cleanup (via use of devm_clk_get()) we
can simplify sa1111_pcmcia_add() too.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Update the pxa2xx socket driver to use the devm_clk_get() API so that
the cleanup paths are simplified.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Convert the pxa2xx socket driver memory allocation to use devm_kzalloc()
to simplify the cleanup path.
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Update the pxa2xx socket driver to use the devm_clk_get() API so that
the cleanup paths are simplified.
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Conflicts:
	drivers/perf/arm_pmu.c

The nomips16 has to be added both as function attribute and assembler
directive.

When only function attribute is specified, the compiler will inline the
function with -Os optimization.  The generated assembly code cannot be
correctly assembled because ISA mode switch has to be done through jump
instruction.

When only ".set nomips16" directive is used, the generated assembly code
will use MIPS32 code for the inline assembly template and MIPS16 for the
function return.  The compiled binary is invalid:

    00403100 <__arch_swab16>:
      403100:   7c0410a0    wsbh    v0,a0
      403104:   e820ea31    swc2    $0,-5583(at)

while correct code should be:

    00402650 <__arch_swab16>:
      402650:   7c0410a0    wsbh    v0,a0
      402654:   03e00008    jr  ra
      402658:   3042ffff    andi    v0,v0,0xffff
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Cc: Chen Jie <chenj@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11087/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The "LD vmlinuz" line in the quiet build output is misaligned with the
rest of the output. Fix this.
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11019/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

handle_dsemul does not exist and it's not being used in the code at all
so remove its declaration. The deliberate DS emulation exception is
handled by the do_dsemulret C code.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10950/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
Scalar Floating-Point Maximum and
Scalar Floating-Point argument with Maximum Absolute Value
MAX.fmt writes the maximum value of the inputs fs and ft to the
destination fd.
MAXA.fmt takes input arguments fs and ft and writes the argument with
the maximum absolute value to the destination fd.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10961/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
Scalar Floating-Point Minimum and
Scalar Floating-Point argument with Minimum Absolute Value

MIN.fmt writes the minimum value of the inputs fs and ft to the
destination fd.
MINA.fmt takes input arguments fs and ft and writes the argument with
the minimum absolute value to the destination fd.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10960/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
Stores in fd a bit mask reflecting the floating-point class of the
floating point scalar value fs.

CLASS.fmt: FPR[fd] = class(FPR[fs])
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10959/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
Floating-Point Round to Integral
Scalar floating-point round to integral floating point value.

RINT.fmt: FPR[fd] = round_int(FPR[fs])
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10958/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
Floating Point Fused Multiply Subtract:
MSUBF.fmt To perform a fused multiply-subtract of FP values.

MSUBF.fmt: FPR[fd] = FPR[fd] - (FPR[fs] x FPR[ft])
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10957/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
Floating Point Fused Multiply Add:
MADDF.fmt To perform a fused multiply-add of FP values.

MADDF.fmt: FPR[fd] = FPR[fd] + (FPR[fs] x FPR[ft])
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10956/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
SELNEZ.fmt: FPR[fd]  FPR[ft].bit0 ? FPR[fs] : 0

Add support for emulating the single and double precision
formats of the said instruction.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10955/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS R6 introduced the following instruction:
SELEQZ.fmt: FPR[fd]  FPR[ft].bit0 ? 0 : FPR[fs]

Add support for emulating the single and double precision formats
of the said instruction.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10954/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for emulating the new CMP.condn.fmt R6 instructions and
return SIGILL for the old C.cond.fmt if R2 emulation is not enabled
since it's not supported by R6.

The functionality of the new CMP.condn.fmt is the following one:

If the comparison specified by the condn field of the instruction
is true for the operand values, the result is true; otherwise, the
result is false. If no exception is taken, the result is written into
FPR fd; true is all 1s and false is all 0s repeated the operand width
of fmt. All other bits beyond the operand width fmt are UNPREDICTABLE.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10953/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add opcodes for the new MIPS R6 FPU instructions.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10952/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Management port MII address is incorrect on Kontron S1901 resulting
in broken networking. Fix by providing definitions for the in-tree DT
pruning code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10914/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10898/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>