- 11 Nov, 2021 1 commit
-
-
Alexander Lobakin authored
Commit 719c5719 ("net: make napi_disable() symmetric with enable") accidentally introduced a bug sometimes leading to a kernel BUG when bringing an iface up/down under heavy traffic load. Prior to this commit, napi_disable() was polling n->state until none of (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC) is set and then always flip them. Now there's a possibility to get away with the NAPIF_STATE_SCHE unset as 'continue' drops us to the cmpxchg() call with an uninitialized variable, rather than straight to another round of the state check. Error path looks like: napi_disable(): unsigned long val, new; /* new is uninitialized */ do { val = READ_ONCE(n->state); /* NAPIF_STATE_NPSVC and/or NAPIF_STATE_SCHED is set */ if (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)) { /* true */ usleep_range(20, 200); continue; /* go straight to the condition check */ } new = val | <...> } while (cmpxchg(&n->state, val, new) != val); /* state == val, cmpxchg() writes garbage */ napi_enable(): do { val = READ_ONCE(n->state); BUG_ON(!test_bit(NAPI_STATE_SCHED, &val)); /* 50/50 boom */ <...> while the typical BUG splat is like: [ 172.652461] ------------[ cut here ]------------ [ 172.652462] kernel BUG at net/core/dev.c:6937! [ 172.656914] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 172.661966] CPU: 36 PID: 2829 Comm: xdp_redirect_cp Tainted: G I 5.15.0 #42 [ 172.670222] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ 172.680646] RIP: 0010:napi_enable+0x5a/0xd0 [ 172.684832] Code: 07 49 81 cc 00 01 00 00 4c 89 e2 48 89 d8 80 e6 fb f0 48 0f b1 55 10 48 39 c3 74 10 48 8b 5d 10 f6 c7 04 75 3d f6 c3 01 75 b4 <0f> 0b 5b 5d 41 5c c3 65 ff 05 b8 e5 61 53 48 c7 c6 c0 f3 34 ad 48 [ 172.703578] RSP: 0018:ffffa3c9497477a8 EFLAGS: 00010246 [ 172.708803] RAX: ffffa3c96615a014 RBX: 0000000000000000 RCX: ffff8a4b575301a0 < snip > [ 172.782403] Call Trace: [ 172.784857] <TASK> [ 172.786963] ice_up_complete+0x6f/0x210 [ice] [ 172.791349] ice_xdp+0x136/0x320 [ice] [ 172.795108] ? ice_change_mtu+0x180/0x180 [ice] [ 172.799648] dev_xdp_install+0x61/0xe0 [ 172.803401] dev_xdp_attach+0x1e0/0x550 [ 172.807240] dev_change_xdp_fd+0x1e6/0x220 [ 172.811338] do_setlink+0xee8/0x1010 [ 172.814917] rtnl_setlink+0xe5/0x170 [ 172.818499] ? bpf_lsm_binder_set_context_mgr+0x10/0x10 [ 172.823732] ? security_capable+0x36/0x50 < snip > Fix this by replacing 'do { } while (cmpxchg())' with an "infinite" for-loop with an explicit break. From v1 [0]: - just use a for-loop to simplify both the fix and the existing code (Eric). [0] https://lore.kernel.org/netdev/20211110191126.1214-1-alexandr.lobakin@intel.com Fixes: 719c5719 ("net: make napi_disable() symmetric with enable") Suggested-by: Eric Dumazet <edumazet@google.com> # for-loop Signed-off-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211110195605.1304-1-alexandr.lobakin@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 10 Nov, 2021 23 commits
-
-
Dust Li authored
We got the following WARNING when running ab/nginx test with RDMA link flapping (up-down-up). The reason is when smc_sock fallback and at linkdown happens simultaneously, we may got the following situation: __smc_lgr_terminate() --> smc_conn_kill() --> smc_close_active_abort() smc_sock->sk_state = SMC_CLOSED sock_put(smc_sock) smc_sock was set to SMC_CLOSED and sock_put() been called when terminate the link group. But later application call close() on the socket, then we got: __smc_release(): if (smc_sock->fallback) smc_sock->sk_state = SMC_CLOSED sock_put(smc_sock) Again we set the smc_sock to CLOSED through it's already in CLOSED state, and double put the refcnt, so the following warning happens: refcount_t: underflow; use-after-free. WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0 Modules linked in: CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 RIP: 0010:refcount_warn_saturate+0x8d/0xf0 Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48 RSP: 0018:ffffc90000527e50 EFLAGS: 00010286 RAX: 0000000000000026 RBX: ffff8881300df2c0 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88813bd58040 RDI: ffff88813bd58048 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000001 R10: ffff8881300df2c0 R11: ffffc90000527c78 R12: ffff8881300df340 R13: ffff8881300df930 R14: ffff88810b3dad80 R15: ffff8881300df4f8 FS: 00007f739de8fb80(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000a01b008 CR3: 0000000111b64003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: smc_release+0x353/0x3f0 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x93/0x230 task_work_run+0x65/0xa0 exit_to_user_mode_prepare+0xf9/0x100 syscall_exit_to_user_mode+0x27/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch adds check in __smc_release() to make sure we won't do an extra sock_put() and set the socket to CLOSED when its already in CLOSED state. Fixes: 51f1de79 (net/smc: replace sock_put worker by socket refcounting) Signed-off-by:Dust Li <dust.li@linux.alibaba.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There is a minus character missing from ERR_PTR(ENOMEM) so if this allocation fails it will lead to an Oops in the caller. Fixes: dc48516e ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Dan Carpenter authored
The u64_stats_update_end() call is supposed to be inside the curly braces so it pairs with the u64_stats_update_begin(). Fixes: 37149e93 ("gve: Implement packet continuation for RX.") Signed-off-by:
-
Aleksander Jan Bajkowski authored
This fixes the error detected when compiling the driver. Fixes: 14d4e308 ("net: lantiq: configure the burst length in ethernet drivers") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Petr Machata authored
In commit 6de6e46d ("cls_flower: Fix inability to match GRE/IPIP packets"), cls_flower was fixed to match an outer packet of a tunneled packet as would be expected, rather than dissecting to the inner packet and matching on that. This fix uncovered several issues in packet matching in mirroring selftests: - in mirror_gre_bridge_1d_vlan.sh and mirror_gre_vlan_bridge_1q.sh, the vlan_ethtype match is copied around as "ip", even as some of the tests are running over ip6gretap. This is fixed by using an "ipv6" for vlan_ethtype in the ip6gretap tests. - in mirror_gre_changes.sh, a filter to count GRE packets is set up to match TTL of 50. This used to trigger in the offloaded datapath, where the envelope TTL was matched, but not in the software datapath, which considered TTL of the inner packet. Now that both match consistently, all the packets were double-counted. This is fixed by marking the filter as skip_hw, leaving only the SW datapath component active. Fixes: 6de6e46d ("cls_flower: Fix inability to match GRE/IPIP packets") Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Eiichi Tsukata authored
Currently vosck_connect() increments sock refcount for nonblocking socket each time it's called, which can lead to memory leak if it's called multiple times because connect timeout function decrements sock refcount only once. Fixes it by making vsock_connect() return -EALREADY immediately when sock state is already SS_CONNECTING. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
-
Marek Behún authored
Commit bfe301eb ("net: mvpp2: convert to use mac_prepare()/mac_finish()") introduced a bug wherein it leaves the MAC RESET register asserted after mac_finish(), due to wrong order of function calls. Before it was: .mac_config() mvpp22_mode_reconfigure() assert reset mvpp2_xlg_config() deassert reset Now it is: .mac_prepare() .mac_config() mvpp2_xlg_config() deassert reset .mac_finish() mvpp2_xlg_config() assert reset Obviously this is wrong. This bug is triggered when phylink tries to change the PHY interface mode from a GMAC mode (sgmii, 1000base-x, 2500base-x) to XLG mode (10gbase-r, xaui). The XLG mode does not work since reset is left asserted. Only after ifconfig down && ifconfig up is called will the XLG mode work. Move the call to mvpp22_mode_reconfigure() to .mac_prepare() implementation. Since some of the subsequent functions need to know whether the interface is being changed, we unfortunately also need to pass around the new interface mode before setting port->phy_interface. Fixes: bfe301eb ("net: mvpp2: convert to use mac_prepare()/mac_finish()") Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Christophe JAILLET authored
It is spurious to allocate a bitmap without initializing it. So, better safe than sorry, initialize it to 0 at least to have some known values. While at it, switch to the devm_bitmap_ API which is less verbose. Fixes: 4b41d343 ("net: ethernet: ti: cpsw: allow untagged traffic on host port") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Vladimir Oltean authored
Commit fe28c53e ("net: stmmac: fix taprio configuration when base_time is in the past") allowed some base time values in the past, but apparently not all, the base-time value of 0 (Jan 1st 1970) is still explicitly denied by the driver. Remove the bogus check. Fixes: b60189e0 ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
-
Andrea Righi authored
It looks like test_vxlan_under_vrf.sh is always failing to verify the connectivity test during the ping between the two simulated VMs. This is due to the fact that veth-hv in each VM should have a distinct MAC address. Fix by setting a unique MAC address on each simulated VM interface. Without this fix: $ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [FAIL] With this fix applied: $ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [FAIL] NOTE: the connectivity test with the underlay VRF is still failing; it seems that ARP requests are blocked at the simulated hypervisor level, probably due to some missing ARP forwarding rules. This requires more investigation (in the meantime we may consider to set that test as expected failure - XFAIL). Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: -
Guangbin Huang authored
Currently, driver only allow configuring ETS bandwidth of TCs according to the max TC number queried from firmware. However, the hardware actually supports 8 TCs and users may need to configure ETS bandwidth of all TCs, so remove the restriction. Fixes: 330baff5 ("net: hns3: add ETS TC weight setting in SSU module") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Guangbin Huang authored
If users set unicast mac address for VFs by PF, they need to guarantee all VFs' address is different. This patch removes the check mac address exist of VFs, for usrs can refresh mac addresses of all VFs directly without need to modify the exist mac address to other value firstly. Fixes: 8e6de441 ("net: hns3: add support for configuring VF MAC from the host") Signed-off-by:
-
Guangbin Huang authored
When driver queries the register number of mac statistics from firmware, the old firmware runs in device version V2 only returns number of valid registers, not include number of three reserved registers among of them. It cause driver doesn't record the last three data when query mac statistics. To fix this problem, driver never query register number in device version V2 and set it to a fixed value which include three reserved registers. Fixes: c8af2887 ("net: hns3: add support pause/pfc durations for mac statistics") Signed-off-by:
-
Yufeng Mo authored
When fully configure VLANs for a VF, then unload the VF while triggering a reset to PF, will cause a kernel crash because the irq is already uninit. [ 293.177579] ------------[ cut here ]------------ [ 293.183502] kernel BUG at drivers/pci/msi.c:352! [ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP ...... [ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf] [ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO) [ 293.414324] pc : free_msi_irqs+0x19c/0x1b8 [ 293.425429] lr : free_msi_irqs+0x18c/0x1b8 [ 293.436545] sp : ffff00002716fbb0 [ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000 [ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00 [ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700 [ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428 [ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000 [ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000 [ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48 [ 293.534013] x15: 0000000000000000 x14: 0000000000000000 [ 293.545883] x13: 0000000000000040 x12: 0000000000000228 [ 293.557508] x11: 0000000000000020 x10: 0000000000000040 [ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000 [ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120 [ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000 [ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000 [ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80 [ 293.623028] Call trace: [ 293.630340] free_msi_irqs+0x19c/0x1b8 [ 293.638849] pci_disable_msix+0x118/0x140 [ 293.647452] pci_free_irq_vectors+0x20/0x38 [ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf] [ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf] [ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf] [ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf] [ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf] [ 293.702307] process_one_work+0x1b0/0x448 [ 293.710034] worker_thread+0x54/0x468 [ 293.717331] kthread+0x134/0x138 [ 293.724114] ret_from_fork+0x10/0x18 [ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000) This patch fixes the problem by waiting for the VF reset done while unloading the VF. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
When the driver processes rx packets, the head pointer is updated only after the number of received packets reaches 16. However, hardware relies on the head pointer to calculate the number of FBDs. As a result, the hardware calculates the FBD incorrectly. Therefore, the driver proactively updates the head pointer in each common poll to ensure that the number of FBDs calculated by the hardware is correct. Fixes: 68752b24 ("net: hns3: schedule the polling again when allocation fails") Signed-off-by:
-
Jie Wang authored
Currently, driver will send command to firmware to query pfc packet number when user uses dcb tool to get pfc parameters. However, the periodic service task will also periodically query and record MAC statistics, including pfc packet number. As the hardware registers of statistics is cleared after reading, it will cause pfc packet number of MAC statistics are not correct after using dcb tool to get pfc parameters. To fix this problem, when user uses dcb tool to get pfc parameters, driver updates MAC statistics firstly and then get pfc packet number from MAC statistics. Fixes: 64fd2300 ("net: hns3: add support for querying pfc puase packets statistic") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
-
Jie Wang authored
Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use pci_irq_vector() to get interrupt vector, which adds the relative interrupt vector again and gets wrong interrupt vector. So fixes it by assign relative interrupt vector to ROCE instead of MSIX interrupt vector and delete the unused struct member base_msi_vector declaration of hclgevf_dev. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Guangbin Huang authored
Currently, when driver is failed to add a new multicast mac address to hardware due to the multicast mac table is full, it will directly return. In this case, if the multicast mac list has some reuse addresses after the new address, those reuse addresses will never be added to hardware. To fix this problem, if function hclge_add_mc_addr_common() returns -ENOSPC, hclge_sync_vport_mac_list() should judge whether continue or stop to add next address. As function hclge_sync_vport_mac_list() needs parameter mac_type to know whether is uc or mc, refine this function to add parameter mac_type and remove parameter sync. So does function hclge_unsync_vport_mac_list(). Fixes: ee4bcd3b ("net: hns3: refactor the MAC address configure") Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_info message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/20211108201817.43121-1-colin.i.king@gmail.comSigned-off-by:
-
Eric Dumazet authored
1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03 ("taprio: make clock reference conversions easier") Fixes: 54002066 ("taprio: Adjust timestamps for TCP packets") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.comSigned-off-by:
-
Taehee Yoo authored
When the amt module is being removed, it calls flush_delayed_work() to exit source_gc_wq. But it wouldn't be exited properly because the amt_source_gc_work(), which is the callback function of source_gc_wq internally calls mod_delayed_work() again. So, amt_source_gc_work() would be called after the amt module is removed. Therefore kernel panic would occur. In order to avoid it, cancel_delayed_work() should be used instead of flush_delayed_work(). Test commands: modprobe amt modprobe -rv amt Splat looks like: BUG: unable to handle page fault for address: fffffbfff80f50db #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1237ee067 P4D 1237ee067 PUD 1237b2067 PMD 100c11067 PTE 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0+ #27 5a0ebebc29fe5c40c68bea90197606c3a832b09f RIP: 0010:run_timer_softirq+0x221/0xfc0 Code: 00 00 4c 89 e1 4c 8b 30 48 c1 e9 03 80 3c 29 00 0f 85 ed 0b 00 00 4d 89 34 24 4d 85 f6 74 19 49 8d 7e 08 48 89 f9 48 c1 e9 03 <80> 3c 29 00 0f 85 fa 0b 00 00 4d 89 66 08 83 04 24 01 49 89 d4 48 RSP: 0018:ffff888119009e50 EFLAGS: 00010806 RAX: ffff8881191f8a80 RBX: 00000000007ffe2a RCX: 1ffffffff80f50db RDX: ffff888119009ed0 RSI: 0000000000000008 RDI: ffffffffc07a86d8 RBP: dffffc0000000000 R08: ffff8881191f8280 R09: ffffed102323f061 R10: ffff8881191f8307 R11: ffffed102323f060 R12: ffff888119009ec8 R13: 00000000000000c0 R14: ffffffffc07a86d0 R15: ffff8881191f82e8 FS: 0000000000000000(0000) GS:ffff888119000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80f50db CR3: 00000001062dc002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? add_timer+0x650/0x650 ? kvm_clock_read+0x14/0x30 ? ktime_get+0xb9/0x180 ? rcu_read_lock_held_common+0xe/0xa0 ? rcu_read_lock_sched_held+0x56/0xc0 ? rcu_read_lock_bh_held+0xa0/0xa0 ? hrtimer_interrupt+0x271/0x790 __do_softirq+0x1d0/0x88f irq_exit_rcu+0xe7/0x120 sysvec_apic_timer_interrupt+0x8a/0xb0 </IRQ> <TASK> [ ... ] Fixes: bc54e49c ("amt: add multicast(IGMP) report message handler") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20211108145340.17208-1-ap420073@gmail.comSigned-off-by:
-
Marek Behún authored
Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are only 1G. Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.orgSigned-off-by:
-
- 09 Nov, 2021 8 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf 2021-11-09 We've added 7 non-merge commits during the last 3 day(s) which contain a total of 10 files changed, 174 insertions(+), 48 deletions(-). The main changes are: 1) Various sockmap fixes, from John and Jussi. 2) Fix out-of-bound issue with bpf_pseudo_func, from Martin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding bpf, sockmap: Fix race in ingress receive verdict with redirect to self bpf, sockmap: Remove unhash handler for BPF sockmap usage bpf, sockmap: Use stricter sk state checks in sk_lookup_assign bpf: selftest: Trigger a DCE on the whole subprog bpf: Stop caching subprog index in the bpf_pseudo_func insn ==================== Link: https://lore.kernel.org/r/20211109215702.38350-1-alexei.starovoitov@gmail.comSigned-off-by:
-
Arnd Bergmann authored
This driver cannot be built-in if IPV6 is a loadable module: x86_64-linux-ld: drivers/net/amt.o: in function `amt_build_mld_gq': amt.c:(.text+0x2e7d): undefined reference to `ipv6_dev_get_saddr' Add the idiomatic Kconfig dependency that all such modules have. Fixes: b9022b53 ("amt: add control plane of amt interface") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Dan Carpenter authored
The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this > needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[] array is allocated in gve_alloc_notify_blocks(). Fixes: 87a7f321 ("gve: Recover from queue stall due to missed IRQ") Signed-off-by:
-
Lin Ma authored
There is a possible race condition (use-after-free) like below (USE) | (FREE) dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | 6pack_close sp_xmit | kfree sp_encaps | | According to the patch "defer ax25 kfree after unregister_netdev", this patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by:Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
Lin Ma authored
There is a possible race condition (use-after-free) like below (USE) | (FREE) ax25_sendmsg | ax25_queue_xmit | dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | mkiss_close ax_xmit | kfree ax_encaps | | Even though there are two synchronization primitives before the kfree: 1. wait_for_completion(&ax->dead). This can prevent the race with routines from mkiss_ioctl. However, it cannot stop the routine coming from upper layer, i.e., the ax25_sendmsg. 2. netif_stop_queue(ax->dev). It seems that this line of code aims to halt the transmit queue but it fails to stop the routine that already being xmit. This patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by: -
Jean Sacren authored
Remove extra space in front of the return statement. Fixes: eb5b5b2f ("sungem_phy: support bcm5461 phy, autoneg.") Signed-off-by:
Jean Sacren <sakiwit@gmail.com> Signed-off-by:
-
Jussi Maki authored
The current conversion of skb->data_end reads like this: ; data_end = (void*)(long)skb->data_end; 559: (79) r1 = *(u64 *)(r2 +200) ; r1 = skb->data 560: (61) r11 = *(u32 *)(r2 +112) ; r11 = skb->len 561: (0f) r1 += r11 562: (61) r11 = *(u32 *)(r2 +116) 563: (1f) r1 -= r11 But similar to the case in 84f44df6 ("bpf: sock_ops sk access may stomp registers when dst_reg = src_reg"), the code will read an incorrect skb->len when src == dst. In this case we end up generating this xlated code: ; data_end = (void*)(long)skb->data_end; 559: (79) r1 = *(u64 *)(r1 +200) ; r1 = skb->data 560: (61) r11 = *(u32 *)(r1 +112) ; r11 = (skb->data)->len 561: (0f) r1 += r11 562: (61) r11 = *(u32 *)(r1 +116) 563: (1f) r1 -= r11 ... where line 560 is the reading 4B of (skb->data + 112) instead of the intended skb->len Here the skb pointer in r1 gets set to skb->data and the later deref for skb->len ends up following skb->data instead of skb. This fixes the issue similarly to the patch mentioned above by creating an additional temporary variable and using to store the register when dst_reg = src_reg. We name the variable bpf_temp_reg and place it in the cb context for sk_skb. Then we restore from the temp to ensure nothing is lost. Fixes: 16137b09 ("bpf: Compute data_end dynamically with JIT code") Signed-off-by:
Jussi Maki <joamaki@gmail.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-6-john.fastabend@gmail.com
-
John Fastabend authored
Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling progress, e.g. offset and length of the skb. First this is poorly named and inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at this layer. But, more importantly strparser is using the following to access its metadata. (struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data)) Where _strp_msg is defined as: struct _strp_msg { struct strp_msg strp; /* 0 8 */ int accum_len; /* 8 4 */ /* size: 12, cachelines: 1, members: 2 */ /* last cacheline: 12 bytes */ }; So we use 12 bytes of ->data[] in struct. However in BPF code running parser and verdict the user has read capabilities into the data[] array as well. Its not too problematic, but we should not be exposing internal state to BPF program. If its really needed then we can use the probe_read() APIs which allow reading kernel memory. And I don't believe cb[] layer poses any API breakage by moving this around because programs can't depend on cb[] across layers. In order to fix another issue with a ctx rewrite we need to stash a temp variable somewhere. To make this work cleanly this patch builds a cb struct for sk_skb types called sk_skb_cb struct. Then we can use this consistently in the strparser, sockmap space. Additionally we can start allowing ->cb[] write access after this. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
-
- 08 Nov, 2021 3 commits
-
-
John Fastabend authored
A socket in a sockmap may have different combinations of programs attached depending on configuration. There can be no programs in which case the socket acts as a sink only. There can be a TX program in this case a BPF program is attached to sending side, but no RX program is attached. There can be an RX program only where sends have no BPF program attached, but receives are hooked with BPF. And finally, both TX and RX programs may be attached. Giving us the permutations: None, Tx, Rx, and TxRx To date most of our use cases have been TX case being used as a fast datapath to directly copy between local application and a userspace proxy. Or Rx cases and TxRX applications that are operating an in kernel based proxy. The traffic in the first case where we hook applications into a userspace application looks like this: AppA redirect AppB Tx <-----------> Rx | | + + TCP <--> lo <--> TCP In this case all traffic from AppA (after 3whs) is copied into the AppB ingress queue and no traffic is ever on the TCP recieive_queue. In the second case the application never receives, except in some rare error cases, traffic on the actual user space socket. Instead the send happens in the kernel. AppProxy socket pool sk0 ------------->{sk1,sk2, skn} ^ | | | | v ingress lb egress TCP TCP Here because traffic is never read off the socket with userspace recv() APIs there is only ever one reader on the sk receive_queue. Namely the BPF programs. However, we've started to introduce a third configuration where the BPF program on receive should process the data, but then the normal case is to push the data into the receive queue of AppB. AppB recv() (userspace) ----------------------- tcp_bpf_recvmsg() (kernel) | | | | | | ingress_msgQ | | | RX_BPF | | | v v sk->receive_queue This is different from the App{A,B} redirect because traffic is first received on the sk->receive_queue. Now for the issue. The tcp_bpf_recvmsg() handler first checks the ingress_msg queue for any data handled by the BPF rx program and returned with PASS code so that it was enqueued on the ingress msg queue. Then if no data exists on that queue it checks the socket receive queue. Unfortunately, this is the same receive_queue the BPF program is reading data off of. So we get a race. Its possible for the recvmsg() hook to pull data off the receive_queue before the BPF hook has a chance to read it. It typically happens when an application is banging on recv() and getting EAGAINs. Until they manage to race with the RX BPF program. To fix this we note that before this patch at attach time when the socket is loaded into the map we check if it needs a TX program or just the base set of proto bpf hooks. Then it uses the above general RX hook regardless of if we have a BPF program attached at rx or not. This patch now extends this check to handle all cases enumerated above, TX, RX, TXRX, and none. And to fix above race when an RX program is attached we use a new hook that is nearly identical to the old one except now we do not let the recv() call skip the RX BPF program. Now only the BPF program pulls data from sk->receive_queue and recv() only pulls data from the ingress msgQ post BPF program handling. With this resolved our AppB from above has been up and running for many hours without detecting any errors. We do this by correlating counters in RX BPF events and the AppB to ensure data is never skipping the BPF program. Selftests, was not able to detect this because we only run them for a short period of time on well ordered send/recvs so we don't get any of the noise we see in real application environments. Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: -
John Fastabend authored
We do not need to handle unhash from BPF side we can simply wait for the close to happen. The original concern was a socket could transition from ESTABLISHED state to a new state while the BPF hook was still attached. But, we convinced ourself this is no longer possible and we also improved BPF sockmap to handle listen sockets so this is no longer a problem. More importantly though there are cases where unhash is called when data is in the receive queue. The BPF unhash logic will flush this data which is wrong. To be correct it should keep the data in the receive queue and allow a receiving application to continue reading the data. This may happen when tcp_abort() is received for example. Instead of complicating the logic in unhash simply moving all this to tcp_close() hook solves this. Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by:
-
John Fastabend authored
In order to fix an issue with sockets in TCP sockmap redirect cases we plan to allow CLOSE state sockets to exist in the sockmap. However, the check in bpf_sk_lookup_assign() currently only invalidates sockets in the TCP_ESTABLISHED case relying on the checks on sockmap insert to ensure we never SOCK_CLOSE state sockets in the map. To prepare for this change we flip the logic in bpf_sk_lookup_assign() to explicitly test for the accepted cases. Namely, a tcp socket in TCP_LISTEN or a udp socket in TCP_CLOSE state. This also makes the code more resilent to future changes. Suggested-by:
-
- 07 Nov, 2021 5 commits
-
-
Christophe JAILLET authored
'netdev' is a managed resource allocated in the probe using 'devm_alloc_etherdev()'. It must not be freed explicitly in the remove function. Fixes: ee7da21a ("net: Add driver for LiteX's LiteETH network interface") Signed-off-by:
-
Chengfeng Ye authored
skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs, but follow error handler branch when pn533_fill_fragment_skbs() fails, skb is freed again, results in double free issue. Fix this by not free skb in error path of pn533_fill_fragment_skbs. Fixes: 963a82e0 ("NFC: pn533: Split large Tx frames in chunks") Fixes: 93ad4202 ("NFC: pn533: Target mode Tx fragmentation support") Signed-off-by:
Chengfeng Ye <cyeaa@connect.ust.hk> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Anders Roxell authored
When building selftests/net with clang, the compiler warn about the function abs() see below: tls.c:657:15: warning: variable 'len_compared' set but not used [-Wunused-but-set-variable] unsigned int len_compared = 0; ^ Rework to remove the unused variable and the for-loop where the variable 'len_compared' was assinged. Fixes: 7f657d5b ("selftests: tls: add selftests for TLS sockets") Signed-off-by:Anders Roxell <anders.roxell@linaro.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Volodymyr Mytnyk authored
The prestera FW v4.0 support commit has been merged accidentally w/o review comments addressed and waiting for the final patch set to be uploaded. So, fix the remaining comments related to structure laid out and build issues. Reported-by:
Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by:
-
Alexey Khoroshilov authored
sctp_sf_violation_chunk() is not called with asoc argument equal to NULL, but if that happens it would lead to NULL pointer dereference in sctp_vtag_verify(). The patch removes code that handles NULL asoc in sctp_sf_violation_chunk(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Proposed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
