- 08 Nov, 2012 40 commits
-
-
Philipp Reisner authored
Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Since we need to hold that mutex anyways to make sure the peer gets that change in the right position in the data stream, it makes a lot of sense to use the same mutex to ensure existence of the tfm. Signed-off-by:
-
Philipp Reisner authored
* the peer does not speak protocol_version 100 and the user wants to change one of: - wire_protocol - two_primaries - integrity_alg * the user wants to remove the allow_two_primaries flag when there are two primaries Signed-off-by: -
Andreas Gruenbacher authored
We don't have the units in constant names in other places, either. Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
The 32-bit resync_after netlink field takes a device minor number as parameter, which is no longer limited to 255. We cannot statically verify which device numbers are valid, so set the ummer limit to the highest possible signed 32-bit integer. Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Lars Ellenberg authored
Activity log transaction writes are serialized on a bit lock. If several CPUs race to write an AL transaction, those that did not get the lock the first time may continue as soon as there are no more pending transactions. The do not need to all grab the lock in turn, just to realize that the AL is clean already, and they have nothing to do. This also closes a potential deadlock with drbd_adm_disk_opts. Once it got the AL bit lock, it knows there are no pending transactions, the AL is clean, and it should be safe to wait for all element references to drop to zero. Signed-off-by:
-
Andreas Gruenbacher authored
This is what it is called in config files and on the command line as well. Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Instead of returning a ret_code outside of the range of enum drbd_ret_code, use NO_ERROR to indicate success. This way, ret_code has the same meaning in all packets. Signed-off-by:
-
Philipp Reisner authored
* Updates to all configuration items is done under genl_lock(). Including removal of mdevs or tconns. * All read non sleeping read sides are protected by rcu * All sleeping read sides keep reference counts to keep the objects alive Signed-off-by:
-
Philipp Reisner authored
Preparing removal of drbd_cfg_rwsem Signed-off-by:
-
Philipp Reisner authored
Preparing removal of drbd_cfg_rwsem Signed-off-by:
-
Andreas Gruenbacher authored
Change the --no-tcp-cork drbdsetup command line option as well as the no_cork netlink packet. Signed-off-by:
-
Andreas Gruenbacher authored
Change the --no-md-flushes drbdsetup command line option as well as the no_md_flush netlink packet. Signed-off-by:
-
Andreas Gruenbacher authored
Change the --no-disk-drain drbdsetup command line option as well as the no_disk_drain netlink packet. Signed-off-by:
-
Andreas Gruenbacher authored
Change the --no-disk-flushes drbdsetup command line option as well as the no_disk_flush netlink packet. Signed-off-by:
-
Andreas Gruenbacher authored
Flags of type NLA_FLAG are either present or absent, but do not have a value by themselves. Use type NLA_U8 for our boolean flags instead, and use the value to determine if the flag should be on or off. On the drbdsetup command line, all those flags have an optional yes/no argument which defaults to yes. Signed-off-by:
-
Philipp Reisner authored
This removes the issue with using peer_seq_lock out of different contexts. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
* Moved rs_planed into it, named total * When having a pointer to the object the values can be embedded into the fifo object. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Lars Ellenberg authored
...and drop explicit typecasts (int)meta_dev_idx < 0. Signed-off-by:
-
Philipp Reisner authored
Preparing RCU for disk_conf Signed-off-by:
-
Philipp Reisner authored
Preparing RCU for disk_conf Signed-off-by:
-
Philipp Reisner authored
Preparing RCU for disk_conf Signed-off-by:
-
Philipp Reisner authored
Preparing to use the same mutex for disk_conf updates Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Lars Ellenberg authored
An administrative detach used to request a state change directly to D_DISKLESS, first suspending IO to avoid the last put_ldev() occuring from an endio handler, potentially in irq context. This is not enough on the receiving side (typically secondary), we may miss some peer_req on the way to local disk, which then may do the last put_ldev() from their drbd_peer_request_endio(). This patch makes the detach always go through the intermediate D_FAILED state. We may consider to rename it D_DETACHING. Alternative approach would be to create yet an other work item to be scheduled on the worker, do the destructor work from there, and get the timing right. Signed-off-by:
-
Lars Ellenberg authored
There are races where the receiver may be exiting, but still need the worker to process some stuff. Do not wait for the receiver to die from an exiting worker. The receiver must already be dead in case the worker decides to exit. If the receiver was still alive, it may still want to queue work, and do drbd_flush_workqueue() from it's disconnect cleanup code, which would no longer be processed by an exiting worker. This also would deadlock, if the worker was to synchornously wait for the receiver to die. Do not implicitly stop the worker. The worker will only be stopped from configuration context, from conn_reconfig_done(), drbd_adm_down() or drbd_adm_delete_connection(), after making sure the receiver is already stopped. Signed-off-by:
-
Lars Ellenberg authored
If a forced disconnect hits a restarting receiver right after it passed its final "if (C_DISCONNECTING)" test in drbdd_init(), but before it was actually restarted by drbd_thread_setup, we could be left with a connection stuck in C_DISCONNECTING, never reaching C_STANDALONE, which would be necessary to take it down or reconfigure it. Move the last cleanup into w_after_conn_state_ch(), and do an additional state change request in conn_try_disconnect(), just in case. Signed-off-by:
-
Andreas Gruenbacher authored
The main purpose of this is to allow to turn data integrity checking on and off on demand without causing interruptions. Implemented by allocating tconn->peer_integrity_tfm only when receiving a P_PROTOCOL message. l accesses to tconn->peer_integrity_tf happen in worker context, and no further synchronization is necessary. On the sender side, tconn->integrity_tfm is modified under tconn->data.mutex, and a P_PROTOCOL message is sent whenever. All accesses to tconn->integrity_tfm already happen under this mutex. Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Andreas Gruenbacher authored
We allocate hash transformations with crypto_alloc_hash() which will only return hash algorithms. It is not necessary to reconfirm that we actually got a hash algorithm. Signed-off-by:
-
