- 20 Jun, 2017 10 commits
-
-
Niklas Cassel authored
When having the skb pointer in the first descriptor, stmmac_tx_clean can get called at a moment where the IP has only cleared the own bit of the first descriptor, thus freeing the skb, even though there can be several descriptors whose buffers point into the same skb. By simply moving the skb pointer from the first descriptor to the last descriptor, a skb will get freed only when the IP has cleared the own bit of all the descriptors that are using that skb. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Somehow two copies of the line 'up_write(&vf->efx->filter_sem);' got into efx_ef10_sriov_set_vf_vlan(). This would put the mutex in a bad state and cause all subsequent down attempts to hang. Fixes: 671b53ee ("sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Serhey Popovych authored
Network interface groups support added while ago, however there is no IFLA_GROUP attribute description in policy and netlink message size calculations until now. Add IFLA_GROUP attribute to the policy. Fixes: cbda10fa ("net_device: add support for network device groups") Signed-off-by:
Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
-
Serhey Popovych authored
While commit 73ba57bf ("ipv6: fix backtracking for throw routes") does good job on error propagation to the fib_rules_lookup() in fib rules core framework that also corrects throw routes handling, it does not solve route reference leakage problem happened when we return -EAGAIN to the fib_rules_lookup() and leave routing table entry referenced in arg->result. If rule with matched throw route isn't last matched in the list we overwrite arg->result losing reference on throw route stored previously forever. We also partially revert commit ab997ad4 ("ipv6: fix the incorrect return value of throw route") since we never return routing table entry with dst.error == -EAGAIN when CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point to check for RTF_REJECT flag since it is always set throw route. Fixes: 73ba57bf ("ipv6: fix backtracking for throw routes") Signed-off-by:
-
Krzysztof Kozlowski authored
The lan911x family of devices require supplying from 3.3 V power supplies (connected to VDD_IO, VDD_A and VREG_3.3 pins). The existing driver however obtains only VDD_IO and VDD_A regulators in an optional way so document this in bindings. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== net: fix loadable module for DPAA Ethernet The DPAA Ethernet makes use of a symbol that is not exported. Address the issue by propagating the dma_ops rather than calling arch_setup_dma_ops(). ==================== Signed-off-by: -
Madalin Bucur authored
Remove the use of arch_setup_dma_ops() that was not exported and was breaking loadable module compilation. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Make sure dma_ops are set, to be later used by the Ethernet driver. Signed-off-by:
-
Sebastian Siewior authored
Since commit 217f6974 ("net: busy-poll: allow preemption in sk_busy_loop()") there is an explicit do_softirq() invocation after local_bh_enable() has been invoked. I don't understand why we need this because local_bh_enable() will invoke do_softirq() once the softirq counter reached zero and we have softirq-related work pending. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Serhey Popovych authored
We should avoid marking goto rules unresolved when their target is actually reachable after rule deletion. Consolder following sample scenario: # ip -4 ru sh 0: from all lookup local 32000: from all goto 32100 32100: from all lookup main 32100: from all lookup default 32766: from all lookup main 32767: from all lookup default # ip -4 ru del pref 32100 table main # ip -4 ru sh 0: from all lookup local 32000: from all goto 32100 [unresolved] 32100: from all lookup default 32766: from all lookup main 32767: from all lookup default After removal of first rule with preference 32100 we mark all goto rules as unreachable, even when rule with same preference as removed one still present. Check if next rule with same preference is available and make all rules with goto action pointing to it. Signed-off-by:
-
- 19 Jun, 2017 6 commits
-
-
Xin Long authored
Now before dumping a sock in sctp_diag, it only holds the sock while the ep may be already destroyed. It can cause a use-after-free panic when accessing ep->asocs. This patch is to set sctp_sk(sk)->ep NULL in sctp_endpoint_destroy, and check if this ep is already destroyed before dumping this ep. Suggested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdrver.com> Signed-off-by:
-
Lin Yun Sheng authored
This patch fixes the phy loopback self_test failed issue. when Marvell Phy Module is loaded, it will powerdown fiber when doing phy loopback self test, which cause phy loopback self_test fail. Signed-off-by:
Lin Yun Sheng <linyunsheng@huawei.com> Signed-off-by:
-
Gao Feng authored
The register_vlan_device would invoke free_netdev directly, when register_vlan_dev failed. It would trigger the BUG_ON in free_netdev if the dev was already registered. In this case, the netdev would be freed in netdev_run_todo later. So add one condition check now. Only when dev is not registered, then free it directly. The following is the part coredump when netdev_upper_dev_link failed in register_vlan_dev. I removed the lines which are too long. [ 411.237457] ------------[ cut here ]------------ [ 411.237458] kernel BUG at net/core/dev.c:7998! [ 411.237484] invalid opcode: 0000 [#1] SMP [ 411.237705] [last unloaded: 8021q] [ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6 [ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000 [ 411.237782] RIP: 0010:free_netdev+0x116/0x120 [ 411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297 [ 411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878 [ 411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000 [ 411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801 [ 411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000 [ 411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000 [ 411.239518] FS: 00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000 [ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0 [ 411.240936] Call Trace: [ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q] [ 411.241910] sock_ioctl+0x18b/0x2c0 [ 411.242394] do_vfs_ioctl+0xa1/0x5d0 [ 411.242853] ? sock_alloc_file+0xa6/0x130 [ 411.243465] SyS_ioctl+0x79/0x90 [ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9 [ 411.244425] RIP: 0033:0x7fb69089a357 [ 411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357 [ 411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003 [ 411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999 [ 411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004 [ 411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001 [ 411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0 Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
-
Raju Rangoju authored
During the module initialisation there is a possible race (basically race between uld and lld) where neither the uld nor lld notifies the uP about where to route the ctrl queue completions. LLD skips notifying uP as the rdma queues were not created by then (will leave it to ULD to notify the uP). As the ULD comes up, it also skips notifying the uP as the flag FULL_INIT_DONE is not set yet (ULD assumes that the interface is not up yet). Consequently, this race between uld and lld leaves uP unnotified about where to send the ctrl queue completions to, leading to iwarp RI_RES WR failure. Here is the race: CPU 0 CPU1 - allocates nic rx queus - t4_sge_alloc_ctrl_txq() (if rdma rsp queues exists, tell uP to route ctrl queue compl to rdma rspq) - acquires the mutex_lock - allocates rdma response queues - if FULL_INIT_DONE set, tell uP to route ctrl queue compl to rdma rspq - relinquishes mutex_lock - acquires the mutex_lock - enable_rx() - set FULL_INIT_DONE - relinquishes mutex_lock This patch fixes the above issue. Fixes: e7519f99('cxgb4: avoid enabling napi twice to the same queue') Signed-off-by:Raju Rangoju <rajur@chelsio.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> CC: Stable <stable@vger.kernel.org> # 4.9+ Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here's just the fix for that ancient bug: * remove wext calling ndo_do_ioctl, since nobody needs that now and it makes the type change easier * use struct iwreq instead of struct ifreq almost everywhere in wireless extensions code * copy only struct iwreq from userspace in dev_ioctl for the wireless extensions, since it's smaller than struct ifreq ==================== Signed-off-by:
-
Haishuang Yan authored
Same as ip_gre, geneve and vxlan, use key->tos as traffic class value. CC: Peter Dawson <petedaws@gmail.com> Fixes: 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets”) Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by:
Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by:
-
- 16 Jun, 2017 4 commits
-
-
Wei Wang authored
In the existing dn_route.c code, dn_route_output_slow() takes dst->__refcnt before calling dn_insert_route() while dn_route_input_slow() does not take dst->__refcnt before calling dn_insert_route(). This makes the whole routing code very buggy. In dn_dst_check_expire(), dnrt_free() is called when rt expires. This makes the routes inserted by dn_route_output_slow() not able to be freed as the refcnt is not released. In dn_dst_gc(), dnrt_drop() is called to release rt which could potentially cause the dst->__refcnt to be dropped to -1. In dn_run_flush(), dst_free() is called to release all the dst. Again, it makes the dst inserted by dn_route_output_slow() not able to be released and also, it does not wait on the rcu and could potentially cause crash in the path where other users still refer to this dst. This patch makes sure both input and output path do not take dst->__refcnt before calling dn_insert_route() and also makes sure dnrt_free()/dst_free() is called when removing dst from the hash table. The only difference between those 2 calls is that dnrt_free() waits on the rcu while dst_free() does not. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Haishuang Yan authored
When __ip6_tnl_rcv fails, the tun_dst won't be freed, so call dst_release to free it in error code path. Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") CC: Alexei Starovoitov <ast@fb.com> Tested-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
When ip_tunnel_rcv fails, the tun_dst won't be freed, so call dst_release to free it in error code path. Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5 fixes 2017-06-14 This series contains some fixes for the mlx5 core and netdev driver. Please pull and let me know if there's any problem. For -stable: ("net/mlx5: Wait for FW readiness before initializing command interface") kernels >= 4.4 ("net/mlx5e: Fix timestamping capabilities reporting") kernels >= 4.5 ("net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it") kernels >= 4.9 ("net/mlx5e: Fix min inline value for VF rep SQs") kernels >= 4.11 The "net/mlx5e: Fix min inline .." (a oneliner patch) doesn't cleanly apply to 4.11, it hits a contextual conflict and can be easily resolved by: + mlx5_query_min_inline(mdev, &priv->params.tx_min_inline_mode); to the end of mlx5e_build_rep_netdev_priv. Note the 2nd parameter of mlx5_query_min_inline is slightly different from the original one. ==================== Signed-off-by:
-
- 15 Jun, 2017 17 commits
-
-
Or Gerlitz authored
The error flow of mlx5e_create_netdev calls the cleanup call of the given profile without checking if it exists, fix that. Currently the VF reps don't register that callback and we crash if getting into error -- can be reproduced by the user doing ctrl^C while attempting to change the sriov mode from legacy to switchdev. Fixes: 26e59d80 '(net/mlx5e: Implement mlx5e interface attach/detach callbacks') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Sabrina Dubroca <sdubroca@redhat.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
Currently the firmware API is partial and allows to offload only the dscp part of the tos, also, ipv6 support isn't there yet. As such, remove the offloading option of ipv4 dscp till the FW APIs are more comprehensive. Fixes: d79b6df6 ('net/mlx5e: Add parsing of TC pedit actions to HW format') Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Currently we don't check that the link type is Eth and hence crash on IB ports when attempting to deref esw->xxx, fix that. To avoid repeating this check over and over, put the existing checks and the one on link type in a single helper. Fixes: 7768d197 ('net/mlx5: E-Switch, Add control for encapsulation') Signed-off-by:
Mohamad Badarnah <mohamadb@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Chris Mi authored
The offending commit only changed the code path for PF/VF, but it didn't take care of VF representors. As a result, since params->tx_min_inline_mode for VF representors is kzalloced to 0 (MLX5_INLINE_MODE_NONE), all VF reps SQs were set to that mode. This actually works on CX5 by default but broke CX4. Fix that by adding a call to query the min inline mode from the VF rep build up code. Fixes: a6f402e4 ("net/mlx5e: Tx, no inline copy on ConnectX-5") Signed-off-by:
Chris Mi <chrism@mellanox.com> Reviewed-by:
-
Maor Dickman authored
Misuse of (BIT) macro caused to report wrong flags for "Hardware Transmit Timestamp Modes" and "Hardware Receive Filter Modes" Fixes: ef9814de ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by:
Maor Dickman <maord@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Before attempting to initialize the command interface we must wait till the fw_initializing bit is clear. If we fail to meet this condition the hardware will drop our configuration, specifically the descriptors page address. This scenario can happen when the firmware is still executing an FLR flow and did not finish yet so the driver needs to wait for that to finish. Fixes: e3297246 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
xypron.glpk@gmx.de authored
The referenced file dsa.txt is located at Documentation/devicetree/bindings/net/dsa/dsa.txt Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Xin Long authored
In sctp_for_each_transport, pos is used to save how many objs it has dumped. Now it gets the last obj by sctp_transport_get_idx, then gets the next obj by sctp_transport_get_next. The issue is that in the meanwhile if some objs in transport hashtable are removed and the objs nums are less than pos, sctp_transport_get_idx would return NULL and hti.walker.tbl is NULL as well. At this moment it should stop hti, instead of continue getting the next obj. Or it would cause a NULL pointer dereference in sctp_transport_get_next. This patch is to pass pos + 1 into sctp_transport_get_idx to get the next obj directly, even if pos > objs nums, it would return NULL and stop hti. Fixes: 626d16f5 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Signed-off-by:
-
David Howells authored
This fixes CVE-2017-7482. When a kerberos 5 ticket is being decoded so that it can be loaded into an rxrpc-type key, there are several places in which the length of a variable-length field is checked to make sure that it's not going to overrun the available data - but the data is padded to the nearest four-byte boundary and the code doesn't check for this extra. This could lead to the size-remaining variable wrapping and the data pointer going over the end of the buffer. Fix this by making the various variable-length data checks use the padded length. Reported-by:
石磊 <shilei-c@360.cn> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.c.dionne@auristor.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Xin Long authored
Now when starting the dad work in addrconf_mod_dad_work, if the dad work is idle and queued, it needs to hold ifa. The problem is there's one gap in [1], during which if the pending dad work is removed elsewhere. It will miss to hold ifa, but the dad word is still idea and queue. if (!delayed_work_pending(&ifp->dad_work)) in6_ifa_hold(ifp); <--------------[1] mod_delayed_work(addrconf_wq, &ifp->dad_work, delay); An use-after-free issue can be caused by this. Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in net6_ifa_finish_destroy was hit because of it. As Hannes' suggestion, this patch is to fix it by holding ifa first in addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if the dad_work is already in queue. Note that this patch did not choose to fix it with: if (!mod_delayed_work(delay)) in6_ifa_hold(ifp); As with it, when delay == 0, dad_work would be scheduled immediately, all addrconf_mod_dad_work(0) callings had to be moved under ifp->lock. Reported-by:Wei Chen <weichen@redhat.com> Suggested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) The netlink attribute passed in to dev_set_alias() is not necessarily NULL terminated, don't use strlcpy() on it. From Alexander Potapenko. 2) Fix implementation of atomics in arm64 bpf JIT, from Daniel Borkmann. 3) Correct the release of netdevs and driver private data in certain circumstances. 4) Sanitize netlink message length properly in decnet, from Mateusz Jurczyk. 5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From Yuval Mintz. 6) Hash secret is never initialized in ipv6 ILA translation code, from Arnd Bergmann. I guess those clang warnings about unused inline functions are useful for something! 7) Fix endian selection in bpf_endian.h, from Daniel Borkmann. 8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX and CAIF. From Mateusz Jurczyk. 9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario Molitor. 10) Do not leak netdev on dev_alloc_name() errors in mac80211, from Johannes Berg. 11) Fix locking in sctp_for_each_endpoint(), from Xin Long. 12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle. 13) Fix use after free in ip_mc_clear_src(), from WANG Cong. 14) Fix regressions caused by ICMP rate limiting changes in 4.11, from Jesper Dangaard Brouer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) i40e: Fix a sleep-in-atomic bug net: don't global ICMP rate limit packets originating from loopback net/act_pedit: fix an error code net: update undefined ->ndo_change_mtu() comment net_sched: move tcf_lock down after gen_replace_estimator() caif: Add sockaddr length check before accessing sa_family in connect handler qed: fix dump of context data qmi_wwan: new Telewell and Sierra device IDs net: phy: Fix MDIO_THUNDER dependencies netconsole: Remove duplicate "netconsole: " logging prefix igmp: acquire pmc lock for ip_mc_clear_src() r8152: give the device version net: rps: fix uninitialized symbol warning mac80211: don't send SMPS action frame in AP mode when not needed mac80211/wpa: use constant time memory comparison for MACs mac80211: set bss_info data before configuring the channel mac80211: remove 5/10 MHz rate code from station MLME mac80211: Fix incorrect condition when checking rx timestamp mac80211: don't look at the PM bit of BAR frames i40e: fix handling of HW ATR eviction ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a bug on sparc where we may dereference freed stack memory" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Work around deallocated stack frame reference gcc bug on sparc.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert an ACPICA commit from the 4.11 cycle that causes problems to happen on some systems and add a protection against possible kernel crashes due to table reference counter imbalance. Specifics: - Revert a 4.11 ACPICA change that made assumptions which are not satisfied on some systems and caused the enumeration of resources to fail on them (Rafael Wysocki). - Add a mechanism to prevent tables from being unmapped prematurely due to reference counter overflows (Lv Zheng)" * tag 'acpi-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection" -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These revert a recent cpufreq schedutil governor change that turned out to be problematic and fix a few minor issues in cpufreq, cpuidle and the Exynos devfreq drivers. Specifics: - Revert a recent cpufreq schedutil governor change that caused some systems to behave undesirably (Rafael Wysocki). - Fix a cpufreq conservative governor issue introduced during the 3.10 cycle that prevents it from working as expected in some situations (Tomasz Wilczyński). - Fix an error code path in the generic cpuidle driver for DT-based systems (Christophe Jaillet). - Fix three minor issues in devfreq drivers for Exynos (Arvind Yadav, Krzysztof Kozlowski)" * tag 'pm-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: dt: Add missing 'of_node_put()' cpufreq: conservative: Allow down_threshold to take values from 1 to 10 Revert "cpufreq: schedutil: Reduce frequencies slower" PM / devfreq: exynos-ppmu: Staticize event list PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable -
Linus Torvalds authored
Merge branch 'for-4.12/driver-matching-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fix from Jiri Kosina: - ifdef-based bandaid for a long-standing issue with HID driver matching, avoiding regressions in cases where specific driver is not enabled in kernel .config, from Jiri Kosina * 'for-4.12/driver-matching-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: let generic driver yield control iff specific driver has been enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - some build dependency issues at CEC core with randconfigs - fix an off by one error at vb2 - a race fix at cec core - driver fixes at tc358743, sir_ir and rainshadow-cec * tag 'media/v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED [media] cec: race fix: don't return -ENONET in cec_receive() [media] sir_ir: infinite loop in interrupt handler [media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE [media] cec: improve MEDIA_CEC_RC dependencies [media] vb2: Fix an off by one error in 'vb2_plane_vaddr' [media] rainshadow-cec: Fix missing spin_lock_init() [media] tc358743: fix register i2c_rd/wr function fix
-
Jia-Ju Bai authored
The driver may sleep under a spin lock, and the function call path is: i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh) i40e_vsi_remove_pvid i40e_vlan_stripping_disable i40e_aq_update_vsi_params i40e_asq_send_command mutex_lock --> may sleep To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and the lock is acquired again after this function. Signed-off-by:Jia-Ju Bai <baijiaju1990@163.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
- 14 Jun, 2017 3 commits
-
-
Rafael J. Wysocki authored
* acpica-fixes: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: conservative: Allow down_threshold to take values from 1 to 10 Revert "cpufreq: schedutil: Reduce frequencies slower" * pm-cpuidle: cpuidle: dt: Add missing 'of_node_put()' * pm-devfreq: PM / devfreq: exynos-ppmu: Staticize event list PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
-
Jesper Dangaard Brouer authored
Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efe ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efe ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by:
Florian Weimer <fweimer@redhat.com> Reported-by:
"H.J. Lu" <hjl.tools@gmail.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
