- 18 Mar, 2017 19 commits
-
-
Jonathan McDowell authored
commit 606142af upstream. On Kernel 4.9, WARNINGs about doing DMA on stack are hit at the dw2102 driver: one in su3000_power_ctrl() and the other in tt_s2_4600_frontend_attach(). Both were due to the use of buffers on the stack as parameters to dvb_usb_generic_rw() and the resulting attempt to do DMA with them. The device was non-functional as a result. So, switch this driver over to use a buffer within the device state structure, as has been done with other DVB-USB drivers. Tested with TechnoTrend TT-connect S2-4600. [mchehab@osg.samsung.com: fixed a warning at su3000_i2c_transfer() that state var were dereferenced before check 'd'] Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit d1eb9814 upstream. On ARM and arm64, we use a dedicated mm_struct to map the UEFI Runtime Services regions, which allows us to map those regions on demand, and in a way that is guaranteed to be compatible with incoming kernels across kexec. As it turns out, we don't fully initialize the mm_struct in the same way as process mm_structs are initialized on fork(), which results in the following crash on ARM if CONFIG_CPUMASK_OFFSTACK=y is enabled: ... EFI Variables Facility v0.08 2004-May-17 Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Process swapper/0 (pid: 1) ... __memzero() check_and_switch_context() virt_efi_get_next_variable() efivar_init() efivars_sysfs_init() do_one_initcall() ... This is due to a missing call to mm_init_cpumask(), so add it. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1488395154-29786-1-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit 040757f7 upstream. Always increment/decrement ucount->count under the ucounts_lock. The increments are there already and moving the decrements there means the locking logic of the code is simpler. This simplification in the locking logic fixes a race between put_ucounts and get_ucounts that could result in a use-after-free because the count could go zero then be found by get_ucounts and then be freed by put_ucounts. A bug presumably this one was found by a combination of syzkaller and KASAN. JongWhan Kim reported the syzkaller failure and Dmitry Vyukov spotted the race in the code. Fixes: f6b2db1a ("userns: Make the count of user namespaces per user") Reported-by:
JongHwan Kim <zzoru007@gmail.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Rik van Riel authored
commit bf7165cf upstream. There are several trace include files that define TRACE_INCLUDE_FILE. Include several of them in the same .c file (as I currently have in some code I am working on), and the compile will blow up with a "warning: "TRACE_INCLUDE_FILE" redefined #define TRACE_INCLUDE_FILE syscalls" Every other include file in include/trace/events/ avoids that issue by having a #undef TRACE_INCLUDE_FILE before the #define; syscalls.h should have one, too. Link: http://lkml.kernel.org/r/20160928225554.13bd7ac6@annuminas.surriel.com Fixes: b8007ef7 ("tracing: Separate raw syscall from syscall tracer") Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Arnd Bergmann authored
commit d43e6fb4 upstream. The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
commit df384d43 upstream. gcc-7 and probably earlier versions get confused by this function and print a harmless warning: drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open': drivers/net/ethernet/broadcom/bcm63xx_enet.c:1130:3: error: 'phydev' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an initialization for the 'phydev' variable when it is unused and changes the check to test for that NULL pointer to make it clear that we always pass a valid pointer here. Signed-off-by:
-
Arnd Bergmann authored
commit 886f9c69 upstream. All pointers to these functions were removed, so now they produce warnings: arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function] This removes the functions. If we need them again, the patch can be reverted later. Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Arnd Bergmann authored
commit d92240d1 upstream. The functions were originally used for the module unload path, but are not referenced any more and just cause warnings: arch/mips/ralink/timer.c:104:13: error: 'rt_timer_disable' defined but not used [-Werror=unused-function] arch/mips/ralink/timer.c:74:13: error: 'rt_timer_free' defined but not used [-Werror=unused-function] Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Fixes: 62ee73d2 ("MIPS: ralink: Make timer explicitly non-modular") Signed-off-by:
-
John Crispin authored
commit 9c48568b upstream. Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/Signed-off-by:
-
Arnd Bergmann authored
commit 906b2684 upstream. kernelci.org reports a warning for this driver, as it copies a local variable into a 'const char *' string: drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] Using kstrndup() simplifies the code and avoids the warning. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit b3f60461 upstream. Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT This updates the defconfig to have the feature built-in. Fixes: 1aefc75b ("cpufreq: stats: Make the stats code non-modular") Signed-off-by:
-
Arnd Bergmann authored
commit 23ca9b52 upstream. kernelci reports a failure of the ip28_defconfig build after upgrading its gcc version: arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop. The problem apparently is that the -mr10k-cache-barrier=store option is now rejected for CPUs other than r10k. Explicitly including the CPU in the check fixes this and is safe because both options were introduced in gcc-4.4. Signed-off-by:
-
Arnd Bergmann authored
commit ea58fca1 upstream. Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH This updates the defconfig to have the feature built-in. Fixes: 086b91d0 ("scsi_dh: integrate into the core SCSI code") Signed-off-by:
-
Arnd Bergmann authored
commit b6176494 upstream. One of the last remaining failures in kernelci.org is for a gcc bug: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot reproduce the problem here. However, it is clear that ip27_defconfig does not actually need this driver as the platform has only PCI-X but not PCIe, and the qlge adapter in turn is PCIe-only. The driver was originally enabled in 2010 along with lots of other drivers. Fixes: 59d302b3 ("MIPS: IP27: Make defconfig useful again.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Arnd Bergmann authored
commit 1742ac26 upstream. vdso.h includes <spaces.h> implicitly after defining CONFIG_32BITS. This defeats the override in mach-ip27/spaces.h, leading to a build error that shows up in kernelci.org: In file included from arch/mips/include/asm/mach-ip27/spaces.h:29:0, from arch/mips/include/asm/page.h:12, from arch/mips/vdso/vdso.h:26, from arch/mips/vdso/gettimeofday.c:11: arch/mips/include/asm/mach-generic/spaces.h:28:0: error: "CAC_BASE" redefined [-Werror] #define CAC_BASE _AC(0x80000000, UL) An earlier patch tried to make the second definition conditional, but that patch had the #ifdef in the wrong place, and would lead to another warning: arch/mips/include/asm/io.h: In function 'phys_to_virt': arch/mips/include/asm/io.h:138:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] For all I can tell, there is no other reason than vdso32 to ever include this file with CONFIG_32BITS set, and the vdso itself should never refer to the base addresses as it is running in user space, so adding an #ifdef here is safe. Link: https://patchwork.kernel.org/patch/9418187/ Fixes: 3ffc17d8 ("MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0") Signed-off-by:
-
Arnd Bergmann authored
commit 9ddc16ad upstream. In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool symbols instead of tristate, and kernelci.org reports a bunch of warnings for this, like: arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE This changes all the MIPS defconfigs with these symbols to have them built-in. Fixes: 9b91c96c ("netfilter: conntrack: built-in support for UDPlite") Fixes: c51d3901 ("netfilter: conntrack: built-in support for DCCP") Signed-off-by:
-
Arnd Bergmann authored
commit 7d6e9105 upstream. An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Johan Hovold authored
commit 2e46565c upstream. A recent change claimed to fix an off-by-one error in the OOB-port completion handler, but instead introduced such an error. This could specifically led to modem-status changes going unnoticed, effectively breaking TIOCMGET. Note that the offending commit fixes a loop-condition underflow and is marked for stable, but should not be backported without this fix. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 2d380889 ("USB: serial: digi_acceleport: fix OOB data sanity check") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 2d380889 upstream. Make sure to check for short transfers to avoid underflow in a loop condition when parsing the receive buffer. Also fix an off-by-one error in the incomplete sanity check which could lead to invalid data being parsed. Fixes: 8c209e67 ("USB: make actual_length in struct urb field u32") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
- 15 Mar, 2017 21 commits
-
-
Greg Kroah-Hartman authored
-
K. Y. Srinivasan authored
commit 372b1e91 upstream. The hypercall page only needs to be executable but currently it is setup to be writable as well. Fix the issue. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
Kees Cook <keescook@chromium.org> Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Tested-by:
-
OGAWA Hirofumi authored
commit c0d0e351 upstream. Recently fallocate patch was merged and it uses MSDOS_I(inode)->mmu_private at fat_evict_inode(). However, fat_inode/fsinfo_inode that was introduced in past didn't initialize MSDOS_I(inode) properly. With those combinations, it became the cause of accessing random entry in FAT area. Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by:
Moreno Bartalucci <moreno.bartalucci@tecnorama.it> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tahsin Erdogan authored
commit 40e952f9 upstream. mem_cgroup_free() indirectly calls wb_domain_exit() which is not prepared to deal with a struct wb_domain object that hasn't executed wb_domain_init(). For instance, the following warning message is printed by lockdep if alloc_percpu() fails in mem_cgroup_alloc(): INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 1950 Comm: mkdir Not tainted 4.10.0+ #151 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x67/0x99 register_lock_class+0x36d/0x540 __lock_acquire+0x7f/0x1a30 lock_acquire+0xcc/0x200 del_timer_sync+0x3c/0xc0 wb_domain_exit+0x14/0x20 mem_cgroup_free+0x14/0x40 mem_cgroup_css_alloc+0x3f9/0x620 cgroup_apply_control_enable+0x190/0x390 cgroup_mkdir+0x290/0x3d0 kernfs_iop_mkdir+0x58/0x80 vfs_mkdir+0x10e/0x1a0 SyS_mkdirat+0xa8/0xd0 SyS_mkdir+0x14/0x20 entry_SYSCALL_64_fastpath+0x18/0xad Add __mem_cgroup_free() which skips wb_domain_exit(). This is used by both mem_cgroup_free() and mem_cgroup_alloc() clean up. Fixes: 0b8f73e1 ("mm: memcontrol: clean up alloc, online, offline, free functions") Link: http://lkml.kernel.org/r/20170306192122.24262-1-tahsin@google.comSigned-off-by:
Tahsin Erdogan <tahsin@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Kirill A. Shutemov authored
commit 6ebb4a1b upstream. The following test case triggers BUG() in munlock_vma_pages_range(): int main(int argc, char *argv[]) { int fd; system("mount -t tmpfs -o huge=always none /mnt"); fd = open("/mnt/test", O_CREAT | O_RDWR); ftruncate(fd, 4UL << 20); mmap(NULL, 4UL << 20, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED | MAP_LOCKED, fd, 0); mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_LOCKED, fd, 0); munlockall(); return 0; } The second mmap() create PTE-mapping of the first huge page in file. It makes kernel munlock the page as we never keep PTE-mapped page mlocked. On munlockall() when we handle vma created by the first mmap(), munlock_vma_page() returns page_mask == 0, as the page is not mlocked anymore. On next iteration follow_page_mask() return tail page, but page_mask is HPAGE_NR_PAGES - 1. It makes us skip to the first tail page of the next huge page and step on VM_BUG_ON_PAGE(PageMlocked(page)). The fix is not use the page_mask from follow_page_mask() at all. It has no use for us. Link: http://lkml.kernel.org/r/20170302150252.34120-1-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
commit 2c4ea6e2 upstream. Fengguang reported random corruptions from various locations on x86-32 after commits d2852a22 ("arch: add ARCH_HAS_SET_MEMORY config") and 9d876e79 ("bpf: fix unlocking of jited image when module ronx not set") that uses the former. While x86-32 doesn't have a JIT like x86_64, the bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module support built in and therefore never had the DEBUG_SET_MODULE_RONX setting enabled. After investigating the crashes further, it turned out that using set_memory_ro() and set_memory_rw() didn't have the desired effect, for example, setting the pages as read-only on x86-32 would still let probe_kernel_write() succeed without error. This behavior would manifest itself in situations where the vmalloc'ed buffer was accessed prior to set_memory_*() such as in case of bpf_prog_alloc(). In cases where it wasn't, the page attribute changes seemed to have taken effect, leading to the conclusion that a TLB invalidate didn't happen. Moreover, it turned out that this issue reproduced with qemu in "-cpu kvm64" mode, but not for "-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(), though. There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush (depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually worked fine, and further investigating the cr4 one turned out that X86_CR4_PGE bit was not set in cr4 register, meaning the __native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same value instead of clearing X86_CR4_PGE in the first write to trigger the flush. It turned out that X86_CR4_PGE was cleared from cr4 during init from lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also cleared from there due to concerns of using PGE in guest kernel that can lead to hard to trace bugs (see bff672e6 ("lguest: documentation V: Host") in init()). The CPU feature bits are cleared in dynamic boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB flushing to use, meaning they still used the old setting of the host kernel. Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate to static_cpu_has() checks is too late at this point as sections have been patched already, so for now, it seems reasonable to switch back to boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf95 ("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via cr3 as originally intended, properly makes the new page attributes visible and thus fixes the crashes seen by Fengguang. Fixes: c109bf95 ("x86/cpufeature: Remove cpu_has_pge") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: bp@suse.de Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: lkp@01.org Cc: Laura Abbott <labbott@redhat.com> Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dan Williams authored
commit ef947b25 upstream. gup_pte_range() fails to check pte_allows_gup() before translating a DAX pte entry, pte_devmap(), to a page. This allows writes to read-only mappings, and bypasses the DAX cacheline dirty tracking due to missed 'mkwrite' faults. The gup_huge_pmd() path and the gup_huge_pud() path correctly check pte_allows_gup() before checking for _devmap() entries. Fixes: 3565fce3 ("mm, x86: get_user_pages() for dax mappings") Link: http://lkml.kernel.org/r/148804251312.36605.12665024794196605053.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Dave Hansen <dave.hansen@linux.intel.com> Reported-by:
-
Arnd Bergmann authored
commit d24cdcd3 upstream. I ran into this compile warning, which is the result of BUG_ON(1) not always leading to the compiler treating the code path as unreachable: include/linux/ceph/osdmap.h: In function 'ceph_can_shift_osds': include/linux/ceph/osdmap.h:62:1: error: control reaches end of non-void function [-Werror=return-type] Using BUG() here avoids the warning. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Hans de Goede authored
commit 998d7573 upstream. If there is no OPREGION_ASLE_EXT then a VBT stored in mailbox #4 may use the ASLE_EXT parts of the opregion. Adjust the vbt_size calculation for a vbt in mailbox #4 for this. This fixes the driver not finding the VBT on a jumper ezpad mini3 cherrytrail tablet and on a ACER SW5_017 machine. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487088758-30050-1-git-send-email-jani.nikula@intel.com (cherry picked from commit dfb65e71) Signed-off-by:
-
Ville Syrjälä authored
commit aa9323dd upstream. Until recently vlv_steal_power_sequencer() wasn't being called for normal DP ports, and hence it could assert that it should only be called for pipe A and B (since pipe C doesn't support eDP). However that changed when we started to consider normal DP ports as well when choosing a PPS. So we will now get spurious warnings when vlv_steal_power_sequencer() does get called for pipe C. Avoid this by moving the WARN down into vlv_detach_power_sequencer() where this assertion should still hold. Cc: Imre Deak <imre.deak@intel.com> Fixes: 9f2bdb00 ("drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV") References: https://bugs.freedesktop.org/show_bug.cgi?id=95287Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170208175254.10958-1-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com> (cherry picked from commit d158694f) Signed-off-by:
-
Chris Wilson authored
commit 24f76b2c upstream. We can not allow the worker to run after its fbdev, or even the module, has been removed. Fixes: cfe63423 ("drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked()") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170207124956.14954-2-chris@chris-wilson.co.ukSigned-off-by:
-
Chris Wilson authored
commit f21b9a92 upstream. We can not allow the worker to run after its fbdev, or even the module, has been removed. Fixes: eaa434de ("drm/fb-helper: Add fb_deferred_io support") Signed-off-by:
-
Chris Wilson authored
commit ddd09373 upstream. Explicitly disable stolen memory when running as a guest in a virtual machine, since the memory is not mediated between clients and reserved entirely for the host. The actual size should be reported as zero, but like every other quirk we want to tell the user what is happening. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99028Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit 04a68a35) Signed-off-by:
-
Dan Carpenter authored
commit f9ad86e4 upstream. Having "ret" be a bool type works for everything except ret = funcs->atomic_check(). The other functions all return zero on error but ->atomic_check() returns negative error codes. We want to propagate the error code but instead we return 1. I found this bug with static analysis and I don't know if it affects run time. Fixes: 4cd4df80 ("drm/atomic: Add ->atomic_check() to encoder helpers") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Fabio Estevam authored
commit fc12bccd upstream. Commit deb65870 ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()") exposes the following probe issue: 63ff0000.tve supply dac not found, using dummy regulator imx-drm display-subsystem: failed to bind 63ff0000.tve (ops imx_tve_ops): -22 When the 'dac-supply' is not passed in the device tree a dummy regulator is used and setting its voltage is not allowed. To fix this issue, do not set the dac-supply voltage inside the driver and let its voltage be specified in the device tree. Print a warning if the the 'dac-supply' voltage has a value different from 2.75V. Fixes: deb65870 ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()") Suggested-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Nandor Han authored
commit 85f57752 upstream. The residue calculation was taking in consideration that dma transaction status will be always retrieved in the dma callback used to inform that dma transfer is complete. However this is not the case for all subsystems that use dma. Some subsystems use a timer to check the dma status periodically. Therefore the calculation was updated and residue is calculated accordingly by a) update the residue calculation taking in consideration the last used buffer index by using *buf_ptail* variable and b) chn_real_count (number of bytes transferred) is initialized to zero, when dma channel is created, to avoid using an uninitialized value in residue calculation when dma status is checked without waiting dma complete event. Signed-off-by:
Nandor Han <nandor.han@ge.com> Acked-by:
Peter Senna Tschudin <peter.senna@collabora.com> Tested-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 31788ca8 upstream. vmware tools has a daemon that gets layout information from the GUI and forwards it to DRM so that the modesetting code can set preferred connector locations and modes. This daemon was using control nodes but since control nodes were just removed, make it possible for the daemon to use render- or primary nodes instead. This is a bit ugly but will allow drm to proceed with removal of the mostly unused control-node code and allow vmware to proceed with fixing up automatic layout settings for gnome-shell/wayland. We bump minor to inform user-space about the api change. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Michel Dänzer authored
commit 239ac65f upstream. The current caching state may not be tt_cached, even though the placement contains TTM_PL_FLAG_CACHED, because placement can contain multiple caching flags. Trying to swap out such a BO would trip up the BUG_ON(ttm->caching_state != tt_cached); in ttm_tt_swapout. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Tomeu Vizoso authored
commit 36fc5797 upstream. Rotel RSX-1058 is a receiver with 4 HDMI inputs and a HDMI output, all 1.1. When a sink that supports deep color is connected to the output, the receiver will send EDIDs that advertise this capability, even if it isn't possible with HDMI versions earlier than 1.3. Currently the kernel is assuming that deep color is possible and the sink displays an error. This quirk will make sure that deep color isn't used with this particular receiver. Fixes: 7a0baa62 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170220152545.13153-1-tomeu.vizoso@collabora.com Cc: Matt Horan <matt@matthoran.com> Tested-by:
Matt Horan <matt@matthoran.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99869Reviewed-by:
-
Y.C. Chen authored
commit 3856081e upstream. The current POST code for the AST2300/2400 family doesn't work properly if the chip hasn't been initialized previously by either the BMC own FW or the VBIOS. This fixes it. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Y.C. Chen authored
commit 9bb92f51 upstream. open_key enables access the registers used by enable_mmio Signed-off-by:
-
