- 20 Apr, 2023 3 commits
-
-
Yong Zhi authored
Just use codec_card_late_probe ptr in struct sof_sdw_codec_info for validation check and drop late_probe variable. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230419195524.46995-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
apoorv authored
RT711 sdca sdw is added with SDW2 link for RPL-P CRB platform. Signed-off-by:
apoorv <apoorv@intel.com> Signed-off-by:
-
Curtis Malainey authored
Even if we find a acpi device we can still be missing the physical node. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
- 19 Apr, 2023 2 commits
-
-
Shengjiu Wang authored
This reverts commit 33683cbf ("ASoC: fsl: remove unnecessary dai_link->platform"). dai_link->platform is needed. The platform component is "snd_dmaengine_pcm", which is registered from cpu driver, If dai_link->platform is not assigned, then platform component will not be probed, then there will be issue: aplay: main:831: audio open error: Invalid argument Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1681900158-17428-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Christophe JAILLET authored
dev_err_probe() already display the error code. There is no need to duplicate it explicitly in the error message. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/c167c16a535049d56f817bbede9c9f6f0a0f4c68.1681626553.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
- 18 Apr, 2023 12 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: These patches make some small changes to align with the B0 silicon revision.
-
Richard Fitzgerald authored
Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest datasheet. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230418144309.1100721-5-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
The mixer source index value for SDW2RX1 is different between A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2 just remove it as a mixer source option. Signed-off-by:
-
Richard Fitzgerald authored
Reduce SDW1 to 4 channels and remove the controls for SDW1 TX5 and TX6. The TX5 and TX6 channels have been removed from B0 silicon. There is no need to support them on A1 silicon. Signed-off-by:
-
Richard Fitzgerald authored
EINT20 contains wake-source interrupts and also interface-blocked interrupts, which all default to unmasked after reset or wake. The comment in cs35l56_init() only mentioned the wake interrupts. Update the comment so it's clear that it's intentional to also mask the *_BLOCKED interrupts. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The probe already stores pointer to &pdev->dev, so use it to make the code a bit easier to read. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe. Signed-off-by:
-
Saalim Quadri authored
Convert the WM8728 audio CODEC bindings to DT schema Signed-off-by:
Saalim Quadri <danascape@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230417204323.137681-1-danascape@gmail.comSigned-off-by:
-
Tom Rix authored
clang build reports sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare] if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ This is a bug, a logical-or should have been used. Fixes: fc0b096c ("ASoC: nau8825: Add delay control for input path") Signed-off-by:Tom Rix <trix@redhat.com> Acked-by:
David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20230418120955.3230705-1-trix@redhat.comSigned-off-by:
-
Krzysztof Kozlowski authored
Code can be a bit simpler with dev_err_probe(). Signed-off-by:
-
Saalim Quadri authored
Convert the WM8737 audio CODEC bindings to DT schema Signed-off-by:
-
- 17 Apr, 2023 13 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Various code improvements. These remove redundant code and clean up less-than-optimal original implementations.
-
Liliang Ye authored
of_node_put() should have been done directly after mqs_priv->regmap = syscon_node_to_regmap(gpr_np); otherwise it creates a reference leak on the success path. To fix this, of_node_put() is moved to the correct location, and change all the gotos to direct returns. Fixes: a9d27367 ("ASoC: fsl_mqs: Fix error handling in probe") Signed-off-by:
Liliang Ye <yll@hust.edu.cn> Reviewed-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cnSigned-off-by:
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: ASoC is using many type of mutex lock, but some of them has helper function, but some doesn't. Or, it has helper function, but is static. This patch-set adds helper function and use it.
-
Kuninori Morimoto authored
ASoC need to use card->mutex with _INIT or _RUNTIME, but there is no helper function for it. This patch adds its helper function and use it. Because people might misunderstand that _init() is mutex initialization, this patch renames _INIT to _ROOT and adds new snd_soc_card_mutex_lock_root() for it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a5zlx3tw.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
soc-pcm.c has snd_soc_dpcm_mutex_lock/unlock(), but other files can't use it because it is static function. It requests snd_soc_pcm_runtime as parameter (A), but sometimes we want to use it by snd_soc_card (B). (A) static inline void snd_soc_dpcm_mutex_lock(struct snd_soc_pcm_runtime *rtd) { mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass); } ^^^^^^^^^ (B) mutex_lock_nested(&card->pcm_mutex, card->pcm_subclass); ^^^^ We want to use it with both "rtd" and "card" for dapm lock/unlock. To enable it, this patch uses _Generic macro. This patch makes snd_soc_dpcm_mutex_{un}lock() global function, and use it on each files. Signed-off-by: -
Kuninori Morimoto authored
soc.h has snd_soc_dapm_mutex_lock/unlock() definition and many drivers are using it, but soc-dapm.c is not. 1st reason is snd_soc_dapm_mutex_lock/unlock() requests snd_soc_dapm_context pointer as parameter (A), but sometimes soc-dapm.c needs to use snd_soc_card (B). (A) static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm) { mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); } ^^^^^^^^^^ (B) mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); ^^^^ 2nd reason is it want to use SND_SOC_DAPM_CLASS_INIT for mutex_lock_nested(), but helper is using _RUNTIME (A). The conclusion is we want to use "dapm vs card" and "_RUNTIME vs _INIT" for dapm lock/unlock. To enable this selfish request, this patch uses _Generic macro. We can use snd_soc_dapm_mutex_lock/unlock() for both dapm and card case. snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_mutex_unlock(dapm); snd_soc_dapm_mutex_lock(card); snd_soc_dapm_mutex_unlock(card); Current soc-dapm.c is using both mutex_lock() and mutex_lock_nested(). This patch handles mutex_lock() as mutex_lock_nested(..., 0), in other words, handles below as same. mutex_lock(&card->dapm_mutex); mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT); Because people might misunderstand that _init() is mutex initialization, this patch renames _INIT to _ROOT and adds new snd_soc_dapm_mutex_lock_root() for it. This patch also moves snd_soc_dapm_subclass definition from soc-dapm.h to soc.h to keep related code together. Because very complex soc.h vs soc-dapm.h relationship, it is difficult/impossible to define these helper into soc-dapm.h. Signed-off-by: -
Saalim Quadri authored
Convert the WM8753 audio codec bindings to DT schema. Signed-off-by:
-
Paweł Anikiel authored
The SSM260x chips have an internal MCLK /2 divider (bit D7 in register R8). Add logic that allows for more MCLK values using this divider. Signed-off-by:
Paweł Anikiel <pan@semihalf.com> Link: https://lore.kernel.org/r/20230414140203.707729-7-pan@semihalf.comSigned-off-by:
-
Simon Trimmer authored
cs35l56_remove() always returns 0. Two of the functions that call it are void and the other one should only return 0. So there's no point returning anything from cs35l56_remove(). Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
-
Simon Trimmer authored
dsp_ready_completion is redundant and can be replaced by a call flush_work() to wait for cs35l56_dsp_work() to complete. As the dsp_work is queued by component_probe() it must run before other ASoC component callbacks and therefore there is no risk of calling flush_work() before the dsp_work() has been queued. Signed-off-by:
-
Simon Trimmer authored
Moving the wait from the beginning of the cs35l56_dsp_work() into cs35l56_component_probe() will prevent the limbo situation that is an artifact of the two stage SoundWire driver probe and initialisation where the card is all registered and shows in ALSA but doesn't actually work because the hardware didn't enumerate. The other bus drivers perform the probe and init sequentially and are not susceptible to this issue. Signed-off-by:
-
Simon Trimmer authored
There is no reason to have such a tight usleep range of 400us and it is acceptable to allow MIN_US * 2. Also wrap the usleep in an inline function. Signed-off-by:
-
Simon Trimmer authored
The irq member was being set before calling the init function and then cs35l56_irq_request() was called only when the init was successful. However cs35l56_release() calls devm_free_irq() when the irq member is set and therefore if init() fails then this will cause an attempted free of an unallocated IRQ. Instead pass the desired IRQ number to the cs35l56_irq_request() function and set cs35l56->irq only when it has been successfully allocated. Signed-off-by:
-
- 14 Apr, 2023 2 commits
-
-
David Lin authored
Change the original fixed delay to the assignment from property. It will make more flexible to different platforms for avoiding pop noise at the beginning of recording. Signed-off-by:
-
David Lin authored
Change the original fixed delay to the assignment from property. It will make more flexible to different platforms for avoiding pop noise at the beginning of recording. Signed-off-by:
-
- 13 Apr, 2023 2 commits
-
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. Signed-off-by:
-
David Rau authored
- Configure the default gound switch delay time before enabling IRQ to avoid the unexpected delay time is set up - Apply DA7219 AAD own work queue to handle AAD events - Replace msleep with queue_delayed_work to have better relability This commit improves the control of ground switches in AAD IRQ Signed-off-by:
David Rau <David.Rau.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20230413024134.8612-1-David.Rau.opensource@dm.renesas.comSigned-off-by:
-
- 12 Apr, 2023 6 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: This set of patches adds handling for system suspend. Patches 1..4 make some code changes that simplify the suspend implementation, mainly to avoid race conditions. There are two seperate aspects to suspend, and these have been done as two patches: - the main suspend-resume handling, - re-loading the firmware if necessary after resume.
-
Richard Fitzgerald authored
Check during cs35l56_system_resume() whether the firmware patch must be applied again. The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates whether the firmware has been patched. In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of dsp_work(). If it is set after system-resume we know that dsp_work() must be run again. In secure mode the pre-OS loader will have done the secure patching and cleared the FIRMWARE_MISSING flag. So this flag does not tell us whether firmware memory was lost. But the driver could only be downloading non-secure tunings, which is always safe to do. If the driver has control of RESET we will have asserted it during suspend so the firmware patch will have been lost. The driver would only have control of RESET in non-secure mode. Signed-off-by:
-
Richard Fitzgerald authored
Delete the 'removing' flag and don't kick init_completion to make a quick cancel of dsp_work(). Just let it timeout on the wait for the completion. Simplify the code to standard cancelling or flushing of the work. This avoids introducing corner cases from a layer of custom signalling. It also avoids potential race conditions when system-suspend handling is added. Unless the hardware is broken, the dsp_work() will already have started and passed the completion before the driver would want to cancel it. Signed-off-by:
-
Richard Fitzgerald authored
This adds the main handling for system suspend but does not handle re-patching the firmware after system resume. This is a multi-stage suspend and resume because if there is a RESET line it is almost certain that it will be shared by all the amps. So every amp must have done its suspend before we can assert RESET. Likewise we must de-assert RESET before the amps can resume. It's preferable to assert RESET before we turning off regulators, and while they power up. The actual suspend and resume is done by using the pair pm_runtime_force_suspend() and pm_runtime_force_resume() to re-use our runtime suspend/resume sequences. pm_runtime_force_suspend() will disable our pm_runtime. If we were runtime-resumed it calls our runtime_suspend(). pm_runtime_force_resume() re-enables pm_runtime and if we were originally runtime-resumed before the pm_runtime_force_suspend() it calls our runtime_resume(). Otherwise it leaves us runtime-suspended. The general process is therefore: suspend() -> finish dsp_work and then run our runtime_suspend suspend_late() -> assert RESET and turn off supplies resume_early() -> enable supplies and de-assert RESET resume() -> pm_runtime_force_resume() In addition, to prevent the IRQ handler running in the period between pm_runtime_force_suspend() and pm_runtime_force_resume() the parent IRQ is temporarily disabled: - from suspend until suspend_noirq - from resume_noirq until resume Signed-off-by:
-
Richard Fitzgerald authored
When we are resuming from a system suspend the CS35L56 has probably been hard reset (usually a power-on reset). So we must wait for the firmware to boot. On SoundWire we also need it to re-initialize before we can read the registers to check the CS35L56 state. The simplest way to handle this is for runtime-resume to always wait for firmware boot. If the firmware is already booted the overhead is only one register read. The system-resume will have to runtime-resume the driver anyway before attempting any register access. So this will automatically include the wait for initialization on SoundWire. Signed-off-by:
-
Richard Fitzgerald authored
At the start of dsp_work() only wait for init_completion if !init_done. This allows system suspend to re-queue dsp_work() without having to do a dummy complete() of init_completion. A dummy completion in system suspend would have to be conditional on init_done. But that would create a possible race condition between our system resume and cs35l56_init() in the corner case that we suspend right after the SoundWire core has enumerated and reported ATTACHED. It is safer and simpler to have cs35l56_init() as the only place that init_completion is completed, and dsp_work() as the only place that it is consumed. Signed-off-by:
-
