- 30 Nov, 2015 11 commits
-
-
Nikolay Aleksandrov authored
MFC_NOTIFY was introduced in kernel 2.1.68 but afaik it hasn't been used and I couldn't find any users currently so just remove it. Only MFC_STATIC is left, so move it into an enum, add a description and use BIT(). Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
It looks like many files are including mroute.h unnecessarily, so remove the include. Most importantly remove it from ipv6. CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: driver update This patchset carries support for port identification, monitoring of ASIC temperature and board fans. ==================== Signed-off-by: -
Jiri Pirko authored
ASIC provides access to fans. Implement their exposure to userspace using hwmon. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Add definition of MFCR, MFSC and MFSM which provide possibility to control and monitor fans. Signed-off-by:
-
Jiri Pirko authored
ASIC provides access to temperature sensors. Implement their exposure to userspace using hwmon. Signed-off-by:
-
Jiri Pirko authored
Add definition of MTCAP and MTMP registers which provide access to temperature sensors. Signed-off-by:
-
Ido Schimmel authored
Allow a user to flash the port's LED in order to identify it. This is achieved by setting the Management LED Control Register (MLCR). Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Add the MLCR register, which controls physical port identification LEDs. Signed-off-by:
-
Herbert Xu authored
The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Add vendor directories (for example intel, marvell and so on) to drivers/net/wireless and change the menuconfig to follow the same categorisation. This unifies the directory layout as we already had few drivers already using vendor directories (especially ath and ti). ==================== Signed-off-by:
-
- 25 Nov, 2015 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-11-25 This series contains updates to fm10k, i40e and i40evf. Alex Duyck fixes up fm10k to use napi_schedule_irqoff() instead of napi_schedule() since the function it is called from runs from hard interrupt context or with interrupts already disabled in netpoll. Shannon cleans up i40e and i40evf unused cd_tunneling parameter and any code comments that refer to it. Then clean up a few instances of BUG_ON, based on a Linux diatribe, especially when WARN_ON can be used. Helin fixed a issue where using ethtool RXNFC command could let receive flow hash could be set on disabled queues, so resolve by returning the number of enabled queues before setting RXNFC. Anjali fixes a MSS issue where the hardware/NVM sets a limit of no less than 256 bytes for MSS, yet the stack can send as low as 76 byte MSS. Fixed the issue by lowering the hardware limit to 64 bytes to avoid MDDs from firing and causing a reset when the MSS is lower than 256. Added a statistic to track how many times we forced to do a write back on transmit if the number of descriptors pending are less than a cache line. Catherine fixes link status changes, where polling would only change link status changes in one direction depending on what the last old data saved off was. This was due to the watchdog only calling link_event and not handle_link_event. Mitch cleans up and enhances error messages related to VF MAC/VLAN filters. v2: Dropped patch "i40e: Properly cast type for arithmetic" patch based on feedback from the community ==================== Signed-off-by: -
Catherine Sullivan authored
Bump. Change-ID: I2d1ce93b2ce74e4eef2394c932aef52cba99713f Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Helin Zhang authored
This patch renames the old pf-specific function in order to clarify its scope. This patch also creates a more generic configure RSS function with the old name. This patch also creates a new more generic function to get RSS configuration, using the appropriate method. Change-ID: Ieddca2707b708ef19f1ebccdfd03a0a0cd63d3af Signed-off-by:
Helin Zhang <helin.zhang@intel.com> Tested-by:
-
Helin Zhang authored
Adjust the RSS configure functions so that there is a generic way to hook to ethtool hooks. Change-ID: If446e34fcfaf1bc3320d9d319829a095b5976e67 Signed-off-by:
-
Helin Zhang authored
This patch fixes a problem where using ethtool rxnfc command could let RX flow hash be set on disabled queues. This patch fixes the problem by returning the number of enabled queues before setting rxnfc. Change-ID: Idbac86b0b47ddacc8deee7cd257e41de01cbe5c0 Signed-off-by:
-
Mitch Williams authored
When a lot (many hundreds) of MAC or VLAN filters are added at one time, we can overflow the Admin Queue buffer size with all the requests. Unfortunately, the driver would then calculate the message size incorrectly, causing it to be rejected by the PF. Furthermore, there was no mechanism to trigger another request to allow for configuring the rest of the filters that didn't fit into the first request. To fix this, recalculate the correct buffer size when we detect the overflow condition instead of just assuming the max buffer size. Also, don't clear the request bit in adapter->aq_required when we have an overflow, so that the rest of the filters can be processed later. Change-ID: Idd7cbbc5af31315e0dcb1b10e6a02ad9817ce65c Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
Clean up and enhance error messages related to VF MAC/VLAN filters. Indicate which VF is having issues, and if possible indicate the MAC address or VLAN involved. Also, when an error is returned from the PF driver, print useful information about what went wrong, for the most likely cases. Change-ID: Ib3d15eef9e3369a78fd142948671e5fa26d921b8 Signed-off-by:
-
Helin Zhang authored
Add a comment to the #endif to more easily match it with its #if. Change-ID: I47eb0a60a17dc6d2f01a930e45006d2dc82e044f Signed-off-by:
-
Catherine Sullivan authored
The watchdog only calls link_event not handle_link_event which means that we need to save the old information in link_event. Previously when polling we were comparing current data to the old data saved the last time we actually received a link event. This means that the polling would only fix link status changes in one direction depending on what the last old data saved off was. Change-ID: Ie590f30fdbcb133d0ddad4e07e3eb1aad58255b3 Signed-off-by:
-
Anjali Singhai Jain authored
When in NAPI with interrupts disabled, the HW needs to be forced to do a write back on TX if the number of descriptors pending are less than a cache line. This stat helps keep track of how many times we get into this situation. Change-ID: I76c1bcc7ebccd6bffcc5aa33bfe05f2fa1c9a984 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Anjali Singhai Jain authored
HW/NVM sets a limit of no less than 256 bytes for MSS. Stack can send as low as 76 bytes MSS. This patch lowers the HW limit to 64 bytes to avoid MDDs from firing and causing a reset when the MSS is lower than 256. Change-ID: I36b500a6bb227d283c3e321a7718e0672b11fab0 Signed-off-by:
-
Shannon Nelson authored
There's no need to kill the kernel thread here. If this condition was true, the probe() would have died long before we got here. In any case, we'll get the same result when this code tries to use the VSI pointer being checked. Prompted by a recent Linus diatribe. Change-ID: I62f531cac34d4fc28ff9657d5b2d9523ae5e33a4 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Shannon Nelson authored
There's really no reason to kill the kernel thread just because of a little info string. This reworks the code to use snprintf's limiting to assure that the string is never too long, and WARN_ON to still put out a warning that we might want to look at the feature list length. Prompted by a recent Linus diatribe. Change-ID: If52ba5ca1c2344d8bf454a31bbb805eb5d2c5802 Signed-off-by:
-
Shannon Nelson authored
There's no need to kill the thread and eventually the kernel in this case. In fact, the remainder of the code won't hurt anything anyway, so just complain that we're here and move along. Prompted by a recent Linus diatribe. Change-ID: Iec020d8bcfedffc1cd2553cc6905fd915bb3e670 Signed-off-by:
-
Shannon Nelson authored
Code was moved into a separate function some time ago. Change-ID: Icabbe71ce05cf5d716d3e1152cdd9cd41d11bcb5 Signed-off-by:
-
Alexander Duyck authored
The fm10k_msix_clean_rings function runs from hard interrupt context or with interrupts already disabled in netpoll. It can use napi_schedule_irqoff() instead of napi_schedule() Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
-
Florian Fainelli authored
Add a PHY entry for the Broadcom BCM7435 chips, this is a 40nm generation Ethernet PHY which is analogous to its 7425 and 7429 counter parts. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 24 Nov, 2015 12 commits
-
-
David S. Miller authored
Geert Uytterhoeven says: ==================== sh_eth: Remove obsolete platform_device_id entries Since commit 3d7608e4 ("ARM: shmobile: bockw: remove legacy board file and config"), which is in v4.4-rc1, shmobile SoCs are only supported in generic DT-only ARM multi-platform builds. The sh_eth driver doesn't need to match platform devices by name anymore, hence this series removes the corresponding platform_device_id entries. Changes since v2: - More Acks, - Platform dependency has entered mainline, Changes since v1: - Protect some data and functions by #ifdef CONFIG_OF to silence unused compiler warnings on SH, - New patches 3 and 4. Thanks for applying! ==================== Signed-off-by:
-
Geert Uytterhoeven authored
Since commit 3d7608e4 ("ARM: shmobile: bockw: remove legacy board file and config"), R-Car Gen1 SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Protect sh_eth_set_rate_r8a777x() and r8a777x_data by #ifdef CONFIG_OF, as they're now referenced on DT platforms only. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Geert Uytterhoeven authored
Since commit 1fa59bda ("ARM: shmobile: Remove legacy board code for Armadillo-800 EVA"), r8a7740 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Protect r8a7740_data by #ifdef CONFIG_OF as it's now referenced on DT platforms only. Move it to a more logical position, in front of the r8a777x support, so we can have a single #ifdef covering all r7s* and r8a* support soon. This requires moving a few helper functions, too. Signed-off-by:
-
Geert Uytterhoeven authored
Since commit a483dcbf ("ARM: shmobile: lager: Remove legacy board support"), R-Car Gen2 SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Protect r8a779x_data by #ifdef CONFIG_OF as it's now referenced on DT platforms only. Signed-off-by:
-
Geert Uytterhoeven authored
Since commit 05104c26 ("ARM: shmobile: r7s72100: genmai: Remove legacy board file"), r7s72100 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Protect r7s72100_data by #ifdef CONFIG_OF as it's now referenced on DT platforms only. Move it to a more logical position, in front of the r8a777x support, so we can have a single #ifdef covering all r7s* and r8a* support soon. This requires moving a helper function, too. Signed-off-by:
-
Nikolay Aleksandrov authored
The private slave queue and slave struct haven't been used for anything and aren't needed, this allows to reduce memory usage and simplify enslave/release. We can use netdev_for_each_lower_dev() to free the vrf ports when deleting a vrf device. Also if in the future a private struct is needed for each slave, it can be implemented via lower devices' private member (similar to how bonding does it). Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-11-23 Here's the first bluetooth-next pull request for the 4.5 kernel. - Add new Get Advertising Size Information management command - Add support for new system note message type on monitor channel - Refactor LE scan changes behind separate workqueue to avoid races - Fix issue with privacy feature when powering on adapter - Various minor fixes & cleanups here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Saurabh Sengar authored
in case of error no need to set num_tx and num_rx = 1, because in case of error these variables will remain unchanged by of_property_read_u32 ie 1 only Signed-off-by:
Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by:
-
Saurabh Sengar authored
this patch does the following: 1 . remove unnecessary if, else condition 2 . reduce one variable 3 . change the return type of 2 functions to void as there return values turn out to be 0 always after above changes Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.5-20151123' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-11-23 this is a pull request of a single patch for net-next/master. The patch by Kedareswara rao Appana converts the xilinx CAN driver to runtime_pm. ==================== Signed-off-by:
-
Geert Uytterhoeven authored
Commit 09605cc1 ("net ipv4: use preferred log methods") replaced a few calls of pr_cont() after a console print without a trailing newline by pr_info(), causing lines to be split during IP autoconfiguration, like: . , OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Convert these back to using pr_cont(), so it prints again: ., OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Absorb the printing of "my address ..." into the previous call to pr_info(), as there's no reason to use a continuation there. Convert one more pr_info() to print nameservers while we're at it. Fixes: 09605cc1 ("net ipv4: use preferred log methods") Signed-off-by:
-
Arnd Bergmann authored
After the introduction of the switch gpio reset API, I'm getting build errors in configurations that disable CONFIG_GPIOLIB: net/dsa/dsa.c:783:16: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration] The reason is that linux/gpio/consumer.h is not automatically included without gpiolib support. This adds an explicit #include statement to make it compile in all configurations. The reset functionality will not work without gpiolib, which is what you get when disabling the feature. As far as I can tell, gpiolib is supported on all architectures on which you can have DSA at the moment. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: cc30c163 ("net: dsa: Add support for a switch reset gpio") Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
