- 17 Apr, 2021 27 commits
-
-
David Edmondson authored
If EFER is not being loaded from the VMCS, show the effective value by reference to the MSR autoload list or calculation. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
David Edmondson <david.edmondson@oracle.com> Message-Id: <20210318120841.133123-5-david.edmondson@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Edmondson authored
When deciding whether to dump the GUEST_IA32_EFER and GUEST_IA32_PAT fields of the VMCS, examine only the VM entry load controls, as saving on VM exit has no effect on whether VM entry succeeds or fails. Suggested-by:
-
David Edmondson authored
Show EFER and PAT based on their individual entry/exit controls. Signed-off-by:
-
David Edmondson authored
If the VM entry/exit controls for loading/saving MSR_EFER are either not available (an older processor or explicitly disabled) or not used (host and guest values are the same), reading GUEST_IA32_EFER from the VMCS returns an inaccurate value. Because of this, in dump_vmcs() don't use GUEST_IA32_EFER to decide whether to print the PDPTRs - always do so if the fields exist. Fixes: 4eb64dce ("KVM: x86: dump VMCS on invalid entry") Signed-off-by:
-
Maxim Levitsky authored
Currently to support Intel->AMD migration, if CPU vendor is GenuineIntel, we emulate the full 64 value for MSR_IA32_SYSENTER_{EIP|ESP} msrs, and we also emulate the sysenter/sysexit instruction in long mode. (Emulator does still refuse to emulate sysenter in 64 bit mode, on the ground that the code for that wasn't tested and likely has no users) However when virtual vmload/vmsave is enabled, the vmload instruction will update these 32 bit msrs without triggering their msr intercept, which will lead to having stale values in kvm's shadow copy of these msrs, which relies on the intercept to be up to date. Fix/optimize this by doing the following: 1. Enable the MSR intercepts for SYSENTER MSRs iff vendor=GenuineIntel (This is both a tiny optimization and also ensures that in case the guest cpu vendor is AMD, the msrs will be 32 bit wide as AMD defined). 2. Store only high 32 bit part of these msrs on interception and combine it with hardware msr value on intercepted read/writes iff vendor=GenuineIntel. 3. Disable vmload/vmsave virtualization if vendor=GenuineIntel. (It is somewhat insane to set vendor=GenuineIntel and still enable SVM for the guest but well whatever). Then zero the high 32 bit parts when kvm intercepts and emulates vmload. Thanks a lot to Paulo Bonzini for helping me with fixing this in the most correct way. This patch fixes nested migration of 32 bit nested guests, that was broken because incorrect cached values of SYSENTER msrs were stored in the migration stream if L1 changed these msrs with vmload prior to L2 entry. Signed-off-by:Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210401111928.996871-3-mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
This is similar to existing 'guest_cpuid_is_amd_or_hygon' Signed-off-by:
-
Sean Christopherson authored
Switch to GFP_KERNEL_ACCOUNT for a handful of allocations that are clearly associated with a single task/VM. Note, there are a several SEV allocations that aren't accounted, but those can (hopefully) be fixed by using the local stack for memory. Signed-off-by:
-
Sean Christopherson authored
Reject KVM_SEV_INIT and KVM_SEV_ES_INIT if they are attempted after one or more vCPUs have been created. KVM assumes a VM is tagged SEV/SEV-ES prior to vCPU creation, e.g. init_vmcb() needs to mark the VMCB as SEV enabled, and svm_create_vcpu() needs to allocate the VMSA. At best, creating vCPUs before SEV/SEV-ES init will lead to unexpected errors and/or behavior, and at worst it will crash the host, e.g. sev_launch_update_vmsa() will dereference a null svm->vmsa pointer. Fixes: 1654efcb ("KVM: SVM: Add KVM_SEV_INIT command") Fixes: ad73109a ("KVM: SVM: Provide support to launch and run an SEV-ES guest") Cc: stable@vger.kernel.org Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Set sev->es_active only after the guts of KVM_SEV_ES_INIT succeeds. If the command fails, e.g. because SEV is already active or there are no available ASIDs, then es_active will be left set even though the VM is not fully SEV-ES capable. Refactor the code so that "es_active" is passed on the stack instead of being prematurely shoved into sev_info, both to avoid having to unwind sev_info and so that it's more obvious what actually consumes es_active in sev_guest_init() and its helpers. Fixes: ad73109a ("KVM: SVM: Provide support to launch and run an SEV-ES guest") Cc: stable@vger.kernel.org Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs. Fixes: ad73109a ("KVM: SVM: Provide support to launch and run an SEV-ES guest") Cc: stable@vger.kernel.org Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Use a basic NOT+AND sequence to clear the Accessed bit in TDP MMU SPTEs, as opposed to the fancy ffs()+clear_bit() logic that was copied from the legacy MMU. The legacy MMU uses clear_bit() because it is operating on the SPTE itself, i.e. clearing needs to be atomic. The TDP MMU operates on a local variable that it later writes to the SPTE, and so doesn't need to be atomic or even resident in memory. Opportunistically drop unnecessary initialization of new_spte, it's guaranteed to be written before being accessed. Using NOT+AND instead of ffs()+clear_bit() reduces the sequence from: 0x0000000000058be6 <+134>: test %rax,%rax 0x0000000000058be9 <+137>: je 0x58bf4 <age_gfn_range+148> 0x0000000000058beb <+139>: test %rax,%rdi 0x0000000000058bee <+142>: je 0x58cdc <age_gfn_range+380> 0x0000000000058bf4 <+148>: mov %rdi,0x8(%rsp) 0x0000000000058bf9 <+153>: mov $0xffffffff,%edx 0x0000000000058bfe <+158>: bsf %eax,%edx 0x0000000000058c01 <+161>: movslq %edx,%rdx 0x0000000000058c04 <+164>: lock btr %rdx,0x8(%rsp) 0x0000000000058c0b <+171>: mov 0x8(%rsp),%r15 to: 0x0000000000058bdd <+125>: test %rax,%rax 0x0000000000058be0 <+128>: je 0x58beb <age_gfn_range+139> 0x0000000000058be2 <+130>: test %rax,%r8 0x0000000000058be5 <+133>: je 0x58cc0 <age_gfn_range+352> 0x0000000000058beb <+139>: not %rax 0x0000000000058bee <+142>: and %r8,%rax 0x0000000000058bf1 <+145>: mov %rax,%r15 thus eliminating several memory accesses, including a locked access. Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Don't clear the dirty bit when aging a TDP MMU SPTE (in response to a MMU notifier event). Prematurely clearing the dirty bit could cause spurious PML updates if aging a page happened to coincide with dirty logging. Note, tdp_mmu_set_spte_no_acc_track() flows into __handle_changed_spte(), so the host PFN will be marked dirty, i.e. there is no potential for data corruption. Fixes: a6a0b05d ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Remove x86's trace_kvm_age_page() tracepoint. It's mostly redundant with the common trace_kvm_age_hva() tracepoint, and if there is a need for the extra details, e.g. gfn, referenced, etc... those details should be added to the common tracepoint so that all architectures and MMUs benefit from the info. Signed-off-by:
-
Sean Christopherson authored
Move arm64's MMU notifier trace events into common code in preparation for doing the hva->gfn lookup in common code. The alternative would be to trace the gfn instead of hva, but that's not obviously better and could also be done in common code. Tracing the notifiers is also quite handy for debug regardless of architecture. Remove a completely redundant tracepoint from PPC e500. Signed-off-by:
-
Sean Christopherson authored
Move the prototypes for the MMU notifier callbacks out of arch code and into common code. There is no benefit to having each arch replicate the prototypes since any deviation from the invocation in common code will explode. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use the leaf-only TDP iterator when changing the SPTE in reaction to a MMU notifier. Practically speaking, this is a nop since the guts of the loop explicitly looks for 4k SPTEs, which are always leaf SPTEs. Switch the iterator to match age_gfn_range() and test_age_gfn() so that a future patch can consolidate the core iterating logic. No real functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move the address space ID check that is performed when iterating over roots into the macro helpers to consolidate code. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Pass the address space ID to TDP MMU's primary "zap gfn range" helper to allow the MMU notifier paths to iterate over memslots exactly once. Currently, both the legacy MMU and TDP MMU iterate over memslots when looking for an overlapping hva range, which can be quite costly if there are a large number of memslots. Add a "flush" parameter so that iterating over multiple address spaces in the caller will continue to do the right thing when yielding while a flush is pending from a previous address space. Note, this also has a functional change in the form of coalescing TLB flushes across multiple address spaces in kvm_zap_gfn_range(), and also optimizes the TDP MMU to utilize range-based flushing when running as L1 with Hyper-V enlightenments. Signed-off-by:
-
Sean Christopherson authored
Gather pending TLB flushes across both address spaces when zapping a given gfn range. This requires feeding "flush" back into subsequent calls, but on the plus side sets the stage for further batching between the legacy MMU and TDP MMU. It also allows refactoring the address space iteration to cover the legacy and TDP MMUs without introducing truly ugly code. Signed-off-by:
-
Sean Christopherson authored
Gather pending TLB flushes across both the legacy and TDP MMUs when zapping collapsible SPTEs to avoid multiple flushes if both the legacy MMU (for nested guests) and TDP MMU have mappings for the memslot. Note, this also optimizes the TDP MMU to flush only the relevant range when running as L1 with Hyper-V enlightenments. Signed-off-by:
-
Sean Christopherson authored
Place the onus on the caller of slot_handle_*() to flush the TLB, rather than handling the flush in the helper, and rename parameters accordingly. This will allow future patches to coalesce flushes between address spaces and between the legacy and TDP MMUs. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
When zapping collapsible SPTEs across multiple roots, gather pending flushes and perform a single remote TLB flush at the end, as opposed to flushing after processing every root. Note, flush may be cleared by the result of zap_collapsible_spte_range(). This is intended and correct, e.g. yielding may have serviced a prior pending flush. Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Vitaly Kuznetsov authored
KVM: x86/vPMU: Forbid reading from MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE MSR_F15H_PERF_CTL0-5, MSR_F15H_PERF_CTR0-5 MSRs have a CPUID bit assigned to them (X86_FEATURE_PERFCTR_CORE) and when it wasn't exposed to the guest the correct behavior is to inject #GP an not just return zero. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210329124804.170173-1-vkuznets@redhat.com> Signed-off-by:
-
Krish Sadhukhan authored
According to APM, the #DB intercept for a single-stepped VMRUN must happen after the completion of that instruction, when the guest does #VMEXIT to the host. However, in the current implementation of KVM, the #DB intercept for a single-stepped VMRUN happens after the completion of the instruction that follows the VMRUN instruction. When the #DB intercept handler is invoked, it shows the RIP of the instruction that follows VMRUN, instead of of VMRUN itself. This is an incorrect RIP as far as single-stepping VMRUN is concerned. This patch fixes the problem by checking, in nested_svm_vmexit(), for the condition that the VMRUN instruction is being single-stepped and if so, queues the pending #DB intercept so that the #DB is accounted for before we execute L1's next instruction. Suggested-by:
Krish Sadhukhan <krish.sadhukhan@oraacle.com> Message-Id: <20210323175006.73249-2-krish.sadhukhan@oracle.com> Signed-off-by:
-
Paolo Bonzini authored
On SVM, reading PDPTRs might access guest memory, which might fault and thus might sleep. On the other hand, it is not possible to release the lock after make_mmu_pages_available has been called. Therefore, push the call to make_mmu_pages_available and the mmu_lock critical section within mmu_alloc_direct_roots and mmu_alloc_shadow_roots. Reported-by:
Wanpeng Li <wanpengli@tencent.com> Co-developed-by:
-
Paolo Bonzini authored
Pull generic x86 SGX changes needed to support SGX in virtual machines.
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix potential crash in preemptible kernels There is a potential race for preemptible kernels, where the host kernel would get a fault when it is preempted as the wrong point in time.
-
- 15 Apr, 2021 2 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Updates for 5.13 - properly handle MVPG in nesting KVM (vsie) - allow to forward the yield_to hypercall (diagnose 9c) - fixes
-
Heiko Carstens authored
store_regs_fmt2() has an ordering problem: first the guarded storage facility is enabled on the local cpu, then preemption disabled, and then the STGSC (store guarded storage controls) instruction is executed. If the process gets scheduled away between enabling the guarded storage facility and before preemption is disabled, this might lead to a special operation exception and therefore kernel crash as soon as the process is scheduled back and the STGSC instruction is executed. Fixes: 4e0b1ab7 ("KVM: s390: gs support for kvm guests") Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Cc: <stable@vger.kernel.org> # 4.12 Link: https://lore.kernel.org/r/20210415080127.1061275-1-hca@linux.ibm.comSigned-off-by:
-
- 12 Apr, 2021 1 commit
-
-
Wei Yongjun authored
Fix the following sparse warning: arch/x86/kernel/cpu/sgx/virt.c:95:35: warning: symbol 'sgx_vepc_vm_ops' was not declared. Should it be static? This symbol is not used outside of virt.c so mark it static. [ bp: Massage commit message. ] Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210412160023.193850-1-weiyongjun1@huawei.com
-
- 08 Apr, 2021 1 commit
-
-
Jarkko Sakkinen authored
The commit in Fixes: changed the SGX EPC page sanitization to end up in sgx_free_epc_page() which puts clean and sanitized pages on the free list. This was done for the reason that it is best to keep the logic to assign available-for-use EPC pages to the correct NUMA lists in a single location. sgx_nr_free_pages is also incremented by sgx_free_epc_pages() but those pages which are being added there per EPC section do not belong to the free list yet because they haven't been sanitized yet - they land on the dirty list first and the sanitization happens later when ksgxd starts massaging them. So remove that addition there and have sgx_free_epc_page() do that solely. [ bp: Sanitize commit message too. ] Fixes: 51ab30eb ("x86/sgx: Replace section->init_laundry_list with sgx_dirty_page_list") Signed-off-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
- 06 Apr, 2021 9 commits
-
-
Sean Christopherson authored
And extract sgx_set_attribute() out of sgx_ioc_enclave_provision() and export it as symbol for KVM to use. The provisioning key is sensitive. The SGX driver only allows to create an enclave which can access the provisioning key when the enclave creator has permission to open /dev/sgx_provision. It should apply to a VM as well, as the provisioning key is platform-specific, thus an unrestricted VM can also potentially compromise the provisioning key. Move the provisioning device creation out of sgx_drv_init() to sgx_init() as a preparation for adding SGX virtualization support, so that even if the SGX driver is not enabled due to flexible launch control not being available, SGX virtualization can still be enabled, and use it to restrict a VM's capability of being able to access the provisioning key. [ bp: Massage commit message. ] Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Kai Huang <kai.huang@intel.com> Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Link: https://lkml.kernel.org/r/0f4d044d621561f26d5f4ef73e8dc6cd18cc7e79.1616136308.git.kai.huang@intel.com
-
Sean Christopherson authored
The host kernel must intercept ECREATE to impose policies on guests, and intercept EINIT to be able to write guest's virtual SGX_LEPUBKEYHASH MSR values to hardware before running guest's EINIT so it can run correctly according to hardware behavior. Provide wrappers around __ecreate() and __einit() to hide the ugliness of overloading the ENCLS return value to encode multiple error formats in a single int. KVM will trap-and-execute ECREATE and EINIT as part of SGX virtualization, and reflect ENCLS execution result to guest by setting up guest's GPRs, or on an exception, injecting the correct fault based on return value of __ecreate() and __einit(). Use host userspace addresses (provided by KVM based on guest physical address of ENCLS parameters) to execute ENCLS/EINIT when possible. Accesses to both EPC and memory originating from ENCLS are subject to segmentation and paging mechanisms. It's also possible to generate kernel mappings for ENCLS parameters by resolving PFN but using __uaccess_xx() is simpler. [ bp: Return early if the __user memory accesses fail, use cpu_feature_enabled(). ] Signed-off-by:
-
Kai Huang authored
Add a helper to update SGX_LEPUBKEYHASHn MSRs. SGX virtualization also needs to update those MSRs based on guest's "virtual" SGX_LEPUBKEYHASHn before EINIT from guest. Signed-off-by:
-
Sean Christopherson authored
Add a helper to extract the fault indicator from an encoded ENCLS return value. SGX virtualization will also need to detect ENCLS faults. Signed-off-by:
-
Sean Christopherson authored
Define the ENCLS leafs that are available with SGX2, also referred to as Enclave Dynamic Memory Management (EDMM). The leafs will be used by KVM to conditionally expose SGX2 capabilities to guests. Signed-off-by:
-
Sean Christopherson authored
Move the ENCLS leaf definitions to sgx.h so that they can be used by KVM. Signed-off-by:
-
Sean Christopherson authored
Expose SGX architectural structures, as KVM will use many of the architectural constants and structs to virtualize SGX. Name the new header file as asm/sgx.h, rather than asm/sgx_arch.h, to have single header to provide SGX facilities to share with other kernel componments. Also update MAINTAINERS to include asm/sgx.h. Signed-off-by:
-
Kai Huang authored
Modify sgx_init() to always try to initialize the virtual EPC driver, even if the SGX driver is disabled. The SGX driver might be disabled if SGX Launch Control is in locked mode, or not supported in the hardware at all. This allows (non-Linux) guests that support non-LC configurations to use SGX. [ bp: De-silli-fy the test. ] Signed-off-by:
-
Sean Christopherson authored
The kernel will currently disable all SGX support if the hardware does not support launch control. Make it more permissive to allow SGX virtualization on systems without Launch Control support. This will allow KVM to expose SGX to guests that have less-strict requirements on the availability of flexible launch control. Improve error message to distinguish between three cases. There are two cases where SGX support is completely disabled: 1) SGX has been disabled completely by the BIOS 2) SGX LC is locked by the BIOS. Bare-metal support is disabled because of LC unavailability. SGX virtualization is unavailable (because of Kconfig). One where it is partially available: 3) SGX LC is locked by the BIOS. Bare-metal support is disabled because of LC unavailability. SGX virtualization is supported. Signed-off-by:
-
