- 11 Oct, 2013 40 commits
-
-
Ian Abbott authored
Rename the CamelCase members of `struct s626_private`. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Rename `struct bufferDMA` and its members to avoid CamelCase. Signed-off-by:
-
Ian Abbott authored
The `I2C_B0(ATTR, VAL)`, `I2C_B1(ATTR, VAL)` and `I2C_B2(ATTR, VAL)` macros are defined identically in "s626.h" and "s626.c". Remove the duplicates from "s626.c". Signed-off-by:
-
Ian Abbott authored
The `I2CR` and `I2CW` macros expand to the I2C read and write addresses, respectively. They are only used in one place each and include the name of a local variable `devpriv` in their expansion. Get rid of the macros and expand them in place. Signed-off-by:
-
Ian Abbott authored
Rename the `ai_continous` member of `struct s626_private` to `ai_continuous`. Signed-off-by:
-
Ian Abbott authored
The Sensoray 626 is based on the Philips SAA7146 chip using the Philips vendor and device ID for the chip, but with custom subdevice and subvendor IDs. Use the Philips IDs in the PCI device table and replace the macros for the subvendor and subdevice IDs with open-coded values. Signed-off-by:
-
Ian Abbott authored
The `DMAHandle` member of `struct bufferDMA` in "s626.h" is unused, so remove it. Signed-off-by:
-
Ian Abbott authored
Convert a printk() to a dev_err(). Signed-off-by:
-
Ian Abbott authored
Tidy up the source code in "s626.c" and make it (slightly) more readable. It's mostly whitespace changes although some large statements have been split into smaller statements. It fixes most of the checkpatch errors and warnings. Signed-off-by:
-
Ian Abbott authored
Make the comments at the top of the file conform to the CodingStyle. Signed-off-by:
-
Ian Abbott authored
Tidy up the "s626.h" header file a bit, cleaning up the whitespace and fixing overlength lines. Add multiple inclusion protection (even though it's only included once and only by "s626.c"). Remove unnecessary driver comment near the start of the file as it is more or less the same as the one in "s626.c". Remove obviously unused/useless stuff. I'm not sure what to do about the INTEL/MOTOROLA platform selection in the file. I've left it alone (set to INTEL) for now. Signed-off-by:
-
Philipp Zabel authored
Lets the IPU driver make use of the PRIME functionality introduced by the "drm: GEM CMA: Add DRM PRIME support" patch. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
This patch adds support for a drm overlay plane on DI0 using the DP. In principle, the overlay plane could also be used on DI1, but to switch the overlay plane between display interfaces, the base planes would have to be exchanged transparently while both display interfaces are inactive. Signed-off-by:
-
Sascha Hauer authored
During a device close the drm core frees all pending events in drm_events_release(). If at that time a pageflip is pending the interrupt handler will try to complete the now unitialized event resulting in a NULL pointer exception. Seen on imx-drm when userspace is killed during a page flip. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Sascha Hauer authored
Currently we wait for a channel until it's idle before actually disabling it. This is not needed for all channels though, so make waiting for idle a separate function and call it where necessary. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
The drm fourccs define formats not available as video4linux pixel formats, such as DRM_FORMAT_BGR565, or the DRM_FORMAT_RGBX/BGRX variants. Also, contrary to the v4l2 formats, the drm formats are well defined. This patch also fixes the BGRA32 and RGB/RGB24 internal formats to use a common internal representation. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
Connecting a 320x240 parallel display on i.MX6 resulted in an invalid DRDY signal because the DC would not receive NL/EOL events on every line. Reducing the allocated DMFC space from 4 slots (256 * 128-bit) to 2 slots (128 * 128-bit) solved the problem. Signed-off-by:
-
Fabio Estevam authored
Booting a mx6 with CONFIG_PROVE_LOCKING we get: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0-rc4-next-20131009+ #34 Not tainted ------------------------------------------------------- swapper/0/1 is trying to acquire lock: (&imx_drm_device->mutex){+.+.+.}, at: [<804575a8>] imx_drm_encoder_get_mux_id+0x28/0x98 but task is already holding lock: (&crtc->mutex){+.+...}, at: [<802fe778>] drm_modeset_lock_all+0x40/0x54 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&crtc->mutex){+.+...}: [<800777d0>] __lock_acquire+0x18d4/0x1c24 [<80077fec>] lock_acquire+0x68/0x7c [<805ead5c>] _mutex_lock_nest_lock+0x58/0x3a8 [<802fec50>] drm_crtc_init+0x48/0xa8 [<80457c88>] imx_drm_add_crtc+0xd4/0x144 [<8045e2e8>] ipu_drm_probe+0x114/0x1fc [<80312278>] platform_drv_probe+0x20/0x50 [<80310c68>] driver_probe_device+0x110/0x22c [<80310e20>] __driver_attach+0x9c/0xa0 [<8030f218>] bus_for_each_dev+0x5c/0x90 [<80310750>] driver_attach+0x20/0x28 [<8031034c>] bus_add_driver+0xdc/0x1dc [<803114d8>] driver_register+0x80/0xfc [<80312198>] __platform_driver_register+0x50/0x64 [<808172fc>] ipu_drm_driver_init+0x18/0x20 [<800088c0>] do_one_initcall+0xfc/0x160 [<807e7c5c>] kernel_init_freeable+0x104/0x1d4 [<805e2930>] kernel_init+0x10/0xec [<8000ea68>] ret_from_fork+0x14/0x2c -> #1 (&dev->mode_config.mutex){+.+.+.}: [<800777d0>] __lock_acquire+0x18d4/0x1c24 [<80077fec>] lock_acquire+0x68/0x7c [<805eb100>] mutex_lock_nested+0x54/0x3a4 [<802fe758>] drm_modeset_lock_all+0x20/0x54 [<802fead4>] drm_encoder_init+0x20/0x7c [<80457ae4>] imx_drm_add_encoder+0x88/0xec [<80459838>] imx_ldb_probe+0x344/0x4fc [<80312278>] platform_drv_probe+0x20/0x50 [<80310c68>] driver_probe_device+0x110/0x22c [<80310e20>] __driver_attach+0x9c/0xa0 [<8030f218>] bus_for_each_dev+0x5c/0x90 [<80310750>] driver_attach+0x20/0x28 [<8031034c>] bus_add_driver+0xdc/0x1dc [<803114d8>] driver_register+0x80/0xfc [<80312198>] __platform_driver_register+0x50/0x64 [<8081722c>] imx_ldb_driver_init+0x18/0x20 [<800088c0>] do_one_initcall+0xfc/0x160 [<807e7c5c>] kernel_init_freeable+0x104/0x1d4 [<805e2930>] kernel_init+0x10/0xec [<8000ea68>] ret_from_fork+0x14/0x2c -> #0 (&imx_drm_device->mutex){+.+.+.}: [<805e510c>] print_circular_bug+0x74/0x2e0 [<80077ad0>] __lock_acquire+0x1bd4/0x1c24 [<80077fec>] lock_acquire+0x68/0x7c [<805eb100>] mutex_lock_nested+0x54/0x3a4 [<804575a8>] imx_drm_encoder_get_mux_id+0x28/0x98 [<80459a98>] imx_ldb_encoder_prepare+0x34/0x114 [<802ef724>] drm_crtc_helper_set_mode+0x1f0/0x4c0 [<802f0344>] drm_crtc_helper_set_config+0x828/0x99c [<802ff270>] drm_mode_set_config_internal+0x5c/0xdc [<802eebe0>] drm_fb_helper_set_par+0x50/0xb4 [<802af580>] fbcon_init+0x490/0x500 [<802dd104>] visual_init+0xa8/0xf8 [<802df414>] do_bind_con_driver+0x140/0x37c [<802df764>] do_take_over_console+0x114/0x1c4 [<802af65c>] do_fbcon_takeover+0x6c/0xd4 [<802b2b30>] fbcon_event_notify+0x7c8/0x818 [<80049954>] notifier_call_chain+0x4c/0x8c [<80049cd8>] __blocking_notifier_call_chain+0x50/0x68 [<80049d10>] blocking_notifier_call_chain+0x20/0x28 [<802a75f0>] fb_notifier_call_chain+0x1c/0x24 [<802a9224>] register_framebuffer+0x188/0x268 [<802ee994>] drm_fb_helper_initial_config+0x2bc/0x4b8 [<802f118c>] drm_fbdev_cma_init+0x7c/0xec [<80817288>] imx_fb_helper_init+0x54/0x90 [<800088c0>] do_one_initcall+0xfc/0x160 [<807e7c5c>] kernel_init_freeable+0x104/0x1d4 [<805e2930>] kernel_init+0x10/0xec [<8000ea68>] ret_from_fork+0x14/0x2c other info that might help us debug this: Chain exists of: &imx_drm_device->mutex --> &dev->mode_config.mutex --> &crtc->mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&crtc->mutex); lock(&dev->mode_config.mutex); lock(&crtc->mutex); lock(&imx_drm_device->mutex); *** DEADLOCK *** 6 locks held by swapper/0/1: #0: (registration_lock){+.+.+.}, at: [<802a90bc>] register_framebuffer+0x20/0x268 #1: (&fb_info->lock){+.+.+.}, at: [<802a7a90>] lock_fb_info+0x20/0x44 #2: (console_lock){+.+.+.}, at: [<802a9218>] register_framebuffer+0x17c/0x268 #3: ((fb_notifier_list).rwsem){.+.+.+}, at: [<80049cbc>] __blocking_notifier_call_chain+0x34/0x68 #4: (&dev->mode_config.mutex){+.+.+.}, at: [<802fe758>] drm_modeset_lock_all+0x20/0x54 #5: (&crtc->mutex){+.+...}, at: [<802fe778>] drm_modeset_lock_all+0x40/0x54 In order to avoid this lockdep warning, remove the locking from imx_drm_encoder_get_mux_id() and imx_drm_crtc_panel_format_pins(). Tested on a mx6sabrelite and mx53qsb. Reported-by:Russell King <rmk+kernel@arm.linux.org.uk> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Malcolm Priestley authored
There is no need remove and add the control urb in device open/close. Move to the probe and disconnect. This make the USB control in/out functions always available to driver. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Sachin Kamat authored
module_spi_driver removes the boilerplate code and simplifies it. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: Henry Pan <hspan@micron.com> Signed-off-by:
-
Sachin Kamat authored
module_platform_driver simplifies the code by removing the boilerplate. Signed-off-by:
-
Alexey Khoroshilov authored
init_usb() may fail after some of mux_rxes already allocated. So we need to release them on the failure path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Alexey Khoroshilov authored
As far as alloc_mux_rx() is called from probe() only there is no need in GFP_ATOMIC here. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Majunath Goudar authored
This patch adds a MMU dependency to configure the ZSMALLOC in drivers/staging/zsmalloc/Kconfig. Without this patch, build system can lead to build failure. This was observed during randconfig testing, in which ZSMALLOC was enabled w/o MMU being enabled. Following was the error: LD vmlinux drivers/built-in.o: In function `__zs_map_object': drivers/staging/zsmalloc/zsmalloc-main.c:650: undefined reference to `map_vm_area' make: *** [vmlinux] Error 1 Signed-off-by:
Manjunath Goudar <csmanjuvijay@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with line over 80 characters in sm7xxfb.c Signed-off-by:
Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with line over 80 characters in ethernet-tx.c Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with quoted string split across lines in ethernet-tx.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with quoted string split across lines in ethernet-spi.c Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with suspect code indent for conditional statements in r8185b_init.c Signed-off-by:
Zach Brown <zab@redhat.com> Signed-off-by:
-
Ebru Akagunduz authored
Fix checkpatch.pl issues with avoid unnecessary line continuations in r8185b_init.c Signed-off-by:
-
Valentina Manea authored
This fixes the following sparse warnings: * drivers/staging/rtl8188eu/core/rtw_cmd.c:221:5: warning: symbol 'rtw_cmd_filter' was not declared. Should it be static? * drivers/staging/rtl8188eu/core/rtw_cmd.c:1670:6: warning: symbol 'dynamic_chk_wk_hdl' was not declared. Should it be static? Signed-off-by:
Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by:
-
Dulshani Gunawardhana authored
Fix checkpatch.pl warning on quoted string on multiple lines in go7007-usb.c Signed-off-by:
Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com> Signed-off-by:
-
Dulshani Gunawardhana authored
Fix "line over 80 characters" warning generated by checkpatch.pl for go7007-usb.c Signed-off-by:
-
Dulshani Gunawardhana authored
Replace KERN_INFO with pr_info in go7007-usb.c Signed-off-by:
-
Dulshani Gunawardhana authored
Replace KERN_ERR with pr_err in go7007-usb.c Signed-off-by:
-
