- 07 Jan, 2016 14 commits
-
-
Lyude authored
This fixes reprobing of display connectors on resume. After some talking with danvet on IRC, I learned that calling drm_helper_hpd_irq_event() does actually trigger a full reprobe of each connector's status. It turns out this is the actual reason reprobing on resume hasn't been working (this was observed on a T440s): - We call hpd_init() - We check each connector for a couple of things before marking connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an active encoder. Of course, a disconnected port won't have an active encoder, so we don't add the flag to any of the connectors. - We call drm_helper_hpd_irq_event() - drm_helper_irq_event() checks each connector for the DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1, so we skip reprobing each connector except that one. In addition, we also now avoid setting connector->polled to DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is handled by the mst helpers. This is probably what was originally intended to happen here. Changes since V1: * Use the explanation of the issue as the commit message instead * Change the title of the commit, since this does more then just stop a check for an encoder now * Add "Fixes" line for the patch that introduced this regression * Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors Changes since V2: * Put patch changelog above Signed-off-by * Follow Daniel Vetter's suggestion for making the code here a bit more legible Fixes: 0e32b39c ("drm/i915: add DP 1.2 MST support (v0.7)") Cc: stable@vger.kernel.org Signed-off-by:
Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452181408-14777-1-git-send-email-cpaul@redhat.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
This is a useful thing to have around as a function because the mechanism may change in the future. There is a net increase in LOC here, and it will continue to be the case on GEN8 and GEN9 - but future GENs may have an alternate mechanism for doing this. Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by:
Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452018609-10142-4-git-send-email-benjamin.widawsky@intel.comSigned-off-by:
-
Ben Widawsky authored
There is no point in emitting a WARN since the backtrace will always be the same. Errors have actually become easier to spot given the large number of WARNs which exist today in modesetting paths. Signed-off-by:
-
Ben Widawsky authored
I think this patch is a worthwhile cleanup even if it might look only marginally useful. It gets more useful in upcoming patches and for handling of future GEN platforms. The only non-mechanical part of this is the removal of the extra & operation on the ring->next_context_status_buffer. This is safe because right above this, we already did a modulus operation. Signed-off-by:
-
Michel Thierry authored
My kbl stopped working because of this. Fixes regression from commit 2f693e28 Author: Damien Lespiau <damien.lespiau@intel.com> Date: Wed Nov 4 19:24:12 2015 +0200 drm/i915: Make turning on/off PW1 and Misc I/O part of the init/fini sequences Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
With sprites, cursors and primary planes taking the atomic state this is now unused. It's removed in a separate commit to allow a revert. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452164052-21752-8-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Maarten Lankhorst authored
Pass in the atomic states to allow for proper updates. This removes uses of intel_crtc->config and direct access to plane->state. This breaks the last bit of kgdboc, but that appears to be dead code. Signed-off-by:
-
Maarten Lankhorst authored
Cursor planes grab the state from plane->state instead of the state that was passed. The only updates are atomic now, so use the plane_state that's passed in. Signed-off-by:
-
Maarten Lankhorst authored
Update cursor_addr when disable_plane is called. This is required to make commit_cursor_plane take a crtc_state and a plane_state. Signed-off-by:
-
Maarten Lankhorst authored
This is duplicated with intel_check_cursor_plane, and with all non-atomic paths removed this should be dead code. Signed-off-by:
-
Maarten Lankhorst authored
Use update_plane and disable_plane directly. Signed-off-by:
-
Maarten Lankhorst authored
Don't use plane->state directly, use the pointer from commit_plane. Changes since v1: - Fix uses of plane->state->rotation and color key to use the passed state too. - Only pass crtc_state and plane_state to update_plane. Changes since v2: - Rebased. Changes since v3: - Small whitespace changes and only assign 1 variable per line. - Constify plane_state and crtc_state. (vsyrjala) Signed-off-by:
-
Matt Roper authored
In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452108870-24204-1-git-send-email-matthew.d.roper@intel.comSigned-off-by:
-
Jani Nikula authored
We still keep getting [ 4.249930] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)! This reverts commit 820da7ae Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Nov 25 16:47:23 2015 +0200 Revert "drm/i915: shut up gen8+ SDE irq dmesg noise" which in itself is a revert, so this is just doing commit 97e5ed11 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Oct 23 10:56:12 2015 +0200 drm/i915: shut up gen8+ SDE irq dmesg noise all over again. I'll stop pretending I understand what's going on like I did when I thought I'd fixed this for good in commit 6a39d7c9 Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Nov 25 16:47:22 2015 +0200 drm/i915: fix the SDE irq dmesg warnings properly Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Reference: http://mid.gmane.org/20151213124945.GA5715@nuc-i3427.alporthouse.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084 Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 820da7ae ("Revert "drm/i915: shut up gen8+ SDE irq dmesg noise"") Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452155350-14658-1-git-send-email-jani.nikula@intel.com
-
- 06 Jan, 2016 7 commits
-
-
Maarten Lankhorst authored
This prevents a unnecessary modeset on a dell XPS 13 (2016). N is always a power of 2, which means that for fuzzy matching we should compare for inequality on the n values, then do fuzzy matching on the m values. Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Reviewed-by:
-
Matt Roper authored
Although we can do a good job of reading out hardware state, the graphics firmware may have programmed the watermarks in a creative way that doesn't match how i915 would have chosen to program them. We shouldn't trust the firmware's watermark programming, but should rather re-calculate how we think WM's should be programmed and then shove those values into the hardware. We can do this pretty easily by creating a dummy top-level state, running it through the check process to calculate all the values, and then just programming the watermarks for each CRTC. v2: Move watermark sanitization after our BIOS fb reconstruction; the watermark calculations that we do here need to look at pstate->fb, which isn't setup yet in intel_modeset_setup_hw_state(), even though we have an enabled & visible plane. v3: - Don't move 'active = optimal' watermark assignment; we just undo that change in the next patch anyway. (Ville) - Move atomic helper locking fix to separate patch. (Maarten) v4: - Grab connection_mutex before calling atomic helper to duplicate state. The connector loop inside the helper will throw a WARN if we don't hold something to protect the connector list (and the helper itself doesn't try to lock the list). - Make failure to calculate watermarks for inherited state a WARN() since it probably indicates a serious problem in either our state readout code or our watermark code for this platform. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Matt Roper authored
Our low-level watermark calculation functions don't get called when the CRTC is disabled or the relevant plane is invisible, so they should never see a zero htotal or zero bpp. However add some checks to ensure this is true so that we don't wind up dividing by zero if we make a mistake elsewhere in the driver (which the atomic watermark series has revealed we might be). References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077370.htmlSigned-off-by:
-
Matt Roper authored
When watermark calculation was moved up to the atomic check phase, the code was updated to calculate based on in-flight atomic state rather than already-committed state. However the hsw_compute_linetime_wm() didn't get updated and continued to pull values out of the currently-committed CRTC state. On platforms that call this function (HSW/BDW only), this will cause problems when we go to enable the CRTC since we'll pull the current mode (off) rather than the mode we're calculating for and wind up with a divide by zero error. This was an oversight in commit: commit a28170f3 Author: Matt Roper <matthew.d.roper@intel.com> Date: Thu Sep 24 15:53:16 2015 -0700 drm/i915: Calculate ILK-style watermarks during atomic check (v3) Signed-off-by: -
Matt Roper authored
Plane state objects contain two copies of src/dest coordinates: the original (requested by userspace) coordinates in the base drm_plane_state object, and a second, clipped copy (i.e., what we actually want to program to the hardware) in intel_plane_state. We've only been setting up the former set of values during boot time FB reconstruction, but we should really be initializing both. Note that the code here probably still needs some more work since we make a lot of assumptions about how the BIOS programmed the hardware that may not always be true, especially on gen9+; e.g., * Primary plane might not be positioned at 0,0 * Primary plane could have been rotated by the BIOS * Primary plane might be scaled * The BIOS fb might be a single "extended mode" FB that spans multiple displays. * ...etc... v2: Reword/expand commit message description of assumptions we make Signed-off-by:
-
Chris Wilson authored
Following a GPU reset, we may leave the context in a poorly defined state, and reloading from that context will leave the GPU flummoxed. For secondary contexts, this will lead to that context being banned - but currently it is also causing the default context to become banned, leading to turmoil in the shared state. This is a regression from commit 6702cf16 [v4.1] Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Mar 16 16:00:58 2015 +0000 drm/i915: Initialize all contexts which quietly introduced the removal of the MI_RESTORE_INHIBIT on the default context. v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org [danvet: This seems to fix a gpu hand on after the first resume, resulting in any future suspend operation failing with -EIO because the gpu seems to be in a funky state. Somehow this patch fixes that.] Signed-off-by:
-
Daniel Vetter authored
They're causing massive amounts of dmesg noise and hence CI noise all over the place. Enabling them for a bit was good enough to refresh our task list of what's still needed to enable rpm by default. To make sure we're not forgetting to make this noisy again add a FIXME comment. Fixes: da5827c3 ("drm/i915: add assert_rpm_wakelock_held helper") Cc: Imre Deak <imre.deak@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Daniel Vetter <daniel.vetter@intel.com>
-
- 05 Jan, 2016 18 commits
-
-
Ankitprasad Sharma authored
i915_gem_object_get_dma_address function is used to retrieve the dma address of a particular page so as to map it in a given GTT entry for CPU access. This function would be used for stolen backed objects also for tasks like pwrite, clearing of the pages etc. So the obj->get_page.sg needs to be initialized for the stolen objects also. Signed-off-by:
Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450765253-32104-2-git-send-email-ankitprasad.r.sharma@intel.comReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Dave Gordon authored
This function was recently renamed & exposed, so now it gets documented Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
-
Jani Nikula authored
Untie the VBT based generic panel driver from the VBT parsing, so that the two don't have to be updated in lockstep. Reviewed-by:
-
Jani Nikula authored
Untie the VBT based generic panel driver from the VBT parsing, so that the two don't have to be updated in lockstep. Reviewed-by:
-
Jani Nikula authored
Make everything a bit more readable and clear. Reviewed-by:
-
Jani Nikula authored
Make the whole thing easier to read. While at it, make the parsing more robust, and ensure we don't read past buffer being parsed. v2: improve commit message (Daniel) Reviewed-by:
-
Jani Nikula authored
Have get_blocksize() support the special case of MIPI sequence block v3+ which has a separate field for size. Provide and use abstractions for getting the blocksize given a pointer to the block "envelope", i.e. pointer to the block id, and given a pointer to the block payload data. Reviewed-by:
-
Jani Nikula authored
There's two blocks to parse, have one function per block. The existing one cuts neatly into two. Reviewed-by:
-
Jani Nikula authored
Just for OCD. Reviewed-by:
-
Alex Dai authored
Set ADS enabling flag during GuC init. Signed-off-by:
Alex Dai <yu.dai@intel.com> Reviewed-by:
-
Alex Dai authored
GuC needs to know which registers and how they will be saved and restored during event such as engine reset or power state changes. For now only the base address of reg state is initialized. The detail register table probably will be setup in future GuC TDR or Preemption patch series. Signed-off-by:
-
Alex Dai authored
GuC supports different scheduling policies for its four internal queues. Currently these have been set to the same default values as KMD_NORMAL queue. Particularly POLICY_MAX_NUM_WI is set to 15 to match GuC internal maximum submit queue numbers to avoid an out-of-space problem. This value indicates max number of work items allowed to be queued for one DPC process. A smaller value will let GuC schedule more frequently while a larger number may increase chances to optimize cmds (such as collapse cmds from same lrc) with risks that keeps CS idle. v1: tidy up code Signed-off-by:
-
Alex Dai authored
The GuC firmware uses this for various purposes. The ADS itself is a chunk of memory created by driver to share with GuC. Its members are usually addresses telling where GuC to access them, including things like scheduler policies, register list that will be saved and restored during reset etc. This is the first patch of a series to enable GuC ADS. For now, we only create the ADS obj whilst keep it disabled. v1: remove dead code checking return of kmap_atomic (Chris Wilson) v2: use kmap instead of the atomic version of it. Signed-off-by:
-
Dave Gordon authored
The GuC code needs to know the size of a logical context, so we expose get_lr_context_size(), renaming it intel_lr_context__size() to fit the naming conventions for nonstatic functions. For: VIZ-2021 Signed-off-by:
-
Alex Dai authored
Split GuC work queue space checking from submission and move it to ring_alloc_request_extras. The reason is that failure in later i915_add_request() won't be handled. In the case timeout happens, driver can return early in order to handle the error. v1: Move wq_reserve_space to ring_reserve_space v2: Move wq_reserve_space to alloc_request_extras (Chris Wilson) v3: The work queue head pointer is cached by driver now. So we can quickly return if space is available. s/reserve/check/g (Dave Gordon) v4: Update cached wq head after ring doorbell; check wq space before ring doorbell in case unexpected error happens; call wq space check only when GuC submission is enabled. (Dave Gordon) Signed-off-by: -
Chris Wilson authored
If the system has no available swap pages, we cannot make forward progress in the shrinker by releasing active pages, only by releasing purgeable pages which are immediately reaped. Take total_swap_pages into account when counting up available objects to be shrunk and subsequently shrinking them. By doing so, we avoid unbinding objects that cannot be shrunk and so wasting CPU cycles flushing those objects from the GPU to the system and then immediately back again (as they will more than likely be reused shortly after). Based on a patch by Akash Goel. v2: frontswap registers extra swap pages available for the system, so it is already include in the count of available swap pages. v3: Use get_nr_swap_pages() to query the currently available amount of swap space. This should also stop us from shrinking the GPU buffers if we ever run out of swap space. Though at that point, we would expect the oom-notifier to be running and failing miserably... Reported-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Chris Wilson authored
Some modules, like i915.ko, use swappable objects and may try to swap them out under memory pressure (via the shrinker). Before doing so, they want to check using get_nr_swap_pages() to see if any swap space is available as otherwise they will waste time purging the object from the device without recovering any memory for the system. This requires the nr_swap_pages counter to be exported to the modules. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
-
Michał Winiarski authored
According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by:
-
- 04 Jan, 2016 1 commit
-
-
Insu Yun authored
Since devm_kzalloc can be failed, it needs to be checked if not, NULL dereference could be happened. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451491169-35068-1-git-send-email-wuninsu@gmail.comSigned-off-by:
-
