- 04 Oct, 2005 20 commits
-
-
David S. Miller authored
Instead of code patching to handle the page size fields in the context registers, just use variables from which we get the proper values. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Anton Altaparmakov authored
which we now cast to 64-bit first (fs/ntfs/mft.c::map_mft_record_page(). Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Anton Altaparmakov authored
count to become negative and hence we had a wild memset() scribbling all over the system's ram. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
-
Randy Dunlap authored
Fix nocast sparse warnings in sungen: drivers/net/sungem.h:1040:45: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Randy Dunlap authored
Fix implicit nocast warnings in ns83820 code, including __nocast: drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Randy Dunlap authored
Fix implicit nocast warnings in ieee80211 code, including __nocast: net/ieee80211/ieee80211_tx.c:215:9: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ion Badulescu authored
Unfortunately, [your patch] might address the crash but doesn't address the real problem. It turns out that the problem is one of padding (the firmware cksum engine works only on 32-bit chunks, yuck), so the special casing for length == 1 wasn't sufficient anyway. This patch addresses the issue, as well the other issue of i386 + CONFIG_HIGHMEM being broken. It is pretty much the same workaround that Adaptec themselves used in their Windows driver. I have yet to check if it fixes the problem when the skb is non-linear, but this patch _will_ solve the problem for 99% of the users out there (those not using sendfile). Signed-off-by: Ion Badulescu <ionut@badula.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Grant Coady authored
This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Wade Farnsworth authored
This patch adds support to the ibm_emac driver for platform-specific unsupported PHY features. The patch attempts to determine the highest speed and duplex when autonegotiation is unsupported. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Philippe De Muyter authored
The patch below is necessary to allow my Digital DS21143 Tulip rev 48 ethernet interface to work in a 10Mbit Half Duplex network. Without it, the driver keeps retrying other modes in an endless loop. It seems like someone already had the same problem with a rev 65 board :) Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Jay Vosburgh authored
David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ursula Braun authored
From: Peter Tiedemann <ptiedem@de.ibm.com> From: Frank Pavlic <pavlic@de.ibm.com> minor qeth fixes: - free old skb in qeth_realloc_headroom after duplicating skb - disable IPV6 support for Hipersockets devices - call ccw_device_set_offline on every channel regardless of the return value of the prior ccw_device_set_offline calls - allocate qdio structures in DMA-area - schedule recovery of appropriate card when cable has been inserted again. - add missing initialization of card->lock - write sequence number in skb->cb for SNA protocol which requires strictly serialized packets. Signed-off-by: Frank Pavlic <pavlic@de.ibm.com> diffstat: qeth.h | 2 ++ qeth_main.c | 37 +++++++++++++++++-------------------- 2 files changed, 19 insertions(+), 20 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Komuro authored
The smc91c92_cs multicast does not work if the count of multicast address is 1. Signed-off-by: <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Randy Dunlap authored
Fix implicit nocast warnings in ieee80211 code: net/ieee80211/ieee80211_tx.c:215:9: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Randy Dunlap authored
Fix implicit nocast warnings in ns83820 code: drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
Skge driver was bringing link up/down when changing mac address. This doesn't work in the bonding environment, and is more effort than needed. Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5271Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
David S. Miller authored
The lock is not held when calling this function, so we shouldn't drop then reacquire it. Based upon a report from Jim MacBaine. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Oct, 2005 18 commits
-
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
It's not a good idea to be smurf'able by default. The few people who need this can turn it on. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
This patch gets rid of a bogus __in_dev_put() in pktgen.c. This was spotted by Suzanne Wood. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The following patch renames __in_dev_get() to __in_dev_get_rtnl() and introduces __in_dev_get_rcu() to cover the second case. 1) RCU with refcnt should use in_dev_get(). 2) RCU without refcnt should use __in_dev_get_rcu(). 3) All others must hold RTNL and use __in_dev_get_rtnl(). There is one exception in net/ipv4/route.c which is in fact a pre-existing race condition. I've marked it as such so that we remember to fix it. This patch is based on suggestions and prior work by Suzanne Wood and Paul McKenney. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Based upon a patch from Mitsuru KANDA <mk@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan Zheng authored
Signed-Off-By: Yan Zheng <yanzheng@21cn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Meelis Roos <mroos@linux.ee> wrote: > RK> My firewall setup relies on proxyarp working. However, with 2.6.14-rc3, > RK> it appears to be completely broken. The firewall is 212.18.232.186, > > Same here with some kernel between 14-rc2 and 14-rc3 - no reposnse to > ARP on a proxyarp gateway. Sorry, no exact revison and no more debugging > yet since it'a a production gateway. The breakage is caused by the change to use the CB area for flagging whether a packet has been queued due to proxy_delay. This area gets cleared every time arp_rcv gets called. Unfortunately packets delayed due to proxy_delay also go through arp_rcv when they are reprocessed. In fact, I can't think of a reason why delayed proxy packets should go through netfilter again at all. So the easiest solution is to bypass that and go straight to arp_process. This is essentially what would've happened before netfilter support was added to ARP. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
During the build for ARM machine type "fortunet", this error occurred: CC net/sysctl_net.o net/sysctl_net.c:36: error: 'core_table' undeclared here (not in a function) It appears that the following configuration settings cause this error due to a missing include: CONFIG_SYSCTL=y CONFIG_NET=y # CONFIG_INET is not set core_table appears to be declared in net/sock.h. if CONFIG_INET were defined, net/sock.h would have been included via: sysctl_net.c -> net/ip.h -> linux/ip.h -> net/sock.h so include it directly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Arnaldo and I agreed it could be applied now, because I have other pending patches depending on this one (Thank you Arnaldo) (The other important patch moves skc_refcnt in a separate cache line, so that the SMP/NUMA performance doesnt suffer from cache line ping pongs) 1) First some performance data : -------------------------------- tcp_v4_rcv() wastes a *lot* of time in __inet_lookup_established() The most time critical code is : sk_for_each(sk, node, &head->chain) { if (INET_MATCH(sk, acookie, saddr, daddr, ports, dif)) goto hit; /* You sunk my battleship! */ } The sk_for_each() does use prefetch() hints but only the begining of "struct sock" is prefetched. As INET_MATCH first comparison uses inet_sk(__sk)->daddr, wich is far away from the begining of "struct sock", it has to bring into CPU cache cold cache line. Each iteration has to use at least 2 cache lines. This can be problematic if some chains are very long. 2) The goal ----------- The idea I had is to change things so that INET_MATCH() may return FALSE in 99% of cases only using the data already in the CPU cache, using one cache line per iteration. 3) Description of the patch --------------------------- Adds a new 'unsigned int skc_hash' field in 'struct sock_common', filling a 32 bits hole on 64 bits platform. struct sock_common { unsigned short skc_family; volatile unsigned char skc_state; unsigned char skc_reuse; int skc_bound_dev_if; struct hlist_node skc_node; struct hlist_node skc_bind_node; atomic_t skc_refcnt; + unsigned int skc_hash; struct proto *skc_prot; }; Store in this 32 bits field the full hash, not masked by (ehash_size - 1) Using this full hash as the first comparison done in INET_MATCH permits us immediatly skip the element without touching a second cache line in case of a miss. Suppress the sk_hashent/tw_hashent fields since skc_hash (aliased to sk_hash and tw_hash) already contains the slot number if we mask with (ehash_size - 1) File include/net/inet_hashtables.h 64 bits platforms : #define INET_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) ((*((__u64 *)&(inet_sk(__sk)->daddr)))== (__cookie)) && \ ((*((__u32 *)&(inet_sk(__sk)->dport))) == (__ports)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) 32bits platforms: #define TCP_IPV4_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) && \ (inet_sk(__sk)->daddr == (__saddr)) && \ (inet_sk(__sk)->rcv_saddr == (__daddr)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) - Adds a prefetch(head->chain.first) in __inet_lookup_established()/__tcp_v4_check_established() and __inet6_lookup_established()/__tcp_v6_check_established() and __dccp_v4_check_established() to bring into cache the first element of the list, before the {read|write}_lock(&head->lock); Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Test for VIA K8T800 north bridge instead of AMD K8 HyperTransport bridge based on new information from Andi Kleen. The AMD HyperTransport interface is not responsible for PCI transactions and so the re-ordering is more likely done by the VIA north bridge. This code is subject to change if we get more information from AMD or VIA. PCI Express devices are excluded from doing the read flush since all chipsets in the write_reorder list are PCI chipsets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
I've found the problem in general. It affects any 64-bit architecture. The problem occurs when you change the system time. Suppose that when you boot your system clock is forward by a day. This gets recorded down in skb_tv_base. You then wind the clock back by a day. From that point onwards the offset will be negative which essentially overflows the 32-bit variables they're stored in. In fact, why don't we just store the real time stamp in those 32-bit variables? After all, we're not going to overflow for quite a while yet. When we do overflow, we'll need a better solution of course. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ravikiran G Thirumalai authored
2.6.14-rc2 does not assign cpus to proper nodeids on our em64t numa boxen. Our boxes use acpi srat for parsing the numa information. srat_detect_node() used phys_proc_id[] to get to the cpu's local apic id, but phys_proc_id[] represents the cpu<->initial_apic_id mapping. The following patch fixes this problem. Now apicid_to_node[] is properly indexed with the local apic id. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Paul Jackson authored
Improve explanation of the Subject line fields in Documentation/SubmittingPatches Canonical Patch Format. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
James Bottomley authored
Some Legacy megaraid cards can't actually cope with the scatter/gather version of the READ CAPACITY command (which is what we now send them since altering all SCSI internal I/O to go via the block layer). Fix this (and a few other broken megaraid driver assumptions) by sending the non-sg version of the command if the sg list only has a single element. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Linus Torvalds authored
-
Paul Jackson authored
Document more details of patch format such as the "from" line and the "---" marker line, and provide more references for patch guidelines. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 02 Oct, 2005 2 commits
-
-
Catalin Marinas authored
Patch from Catalin Marinas Data abort caused by ldrex/strex can leave the exclusive monitor in an unpredictable state. It is recommended that a clrex/strex is performed to clear this state. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Richard Henderson authored
Pass in the pointer to the on-stack registers rather than using them directly as the arguments. Ivan noticed that I missed a spot when purging the registers as first stack parameter idiom. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-