- 12 Aug, 2023 17 commits
-
-
Arnd Bergmann authored
Merge tag 'aspeed-6.6-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.6 - New machines * Inventec's Starscream AST2600 BMC, for a x86 server platform * Meta's Yossemite 4 AST2600 BMC, for a multi-node server platform - Big device tree rework for IBM's Power10 BMC platforms - Updates for wedge400 and Mt Mitchell - AST2600 I3C and VUART descriptions * tag 'aspeed-6.6-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: Add AST2600 I3C control pins ARM: dts: aspeed: everest: Move common devices up ARM: dts: aspeed: everest: Reorganise FSI description ARM: dts: aspeed: rainier: Reorganise FSI description ARM: dts: aspeed: bonnell: Reorganise FSI description ARM: dts: aspeed: Add P10 FSI descriptions ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC dt-bindings: arm: aspeed: add Facebook Yosemite 4 board ARM: dts: aspeed: wedge400: Set eMMC max frequency ARM: dts: aspeed: wedge400: Enable more ADC channels ARM: dts: aspeed: Update spi alias in Facebook AST2500 Common dtsi ARM: dts: aspeed: rainier: Remove TPM device ARM: dts: aspeed: Add AST2600 VUARTs ARM: dts: aspeed: mtmitchell: Add MCTP ARM: dts: aspeed: mtmitchell: Update ADC sensors for Mt.Mitchell DVT systems ARM: dts: aspeed: mtmitchell: Enable the BMC UART8 and UART9 ARM: dts: aspeed: Adding Inventec Starscream BMC dt-bindings: arm: aspeed: add Inventec starscream-bmc ARM: dts: aspeed: bonnell: Add DIMM SPD Link: https://lore.kernel.org/r/CACPK8Xc76O5kLEAXRtbFXZcP=ObrKR0Kpez_er+zV2vZffZe7A@mail.gmail.comSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Devicetree changes for omaps for v6.6 Updates for opp and pinctrl nodes to follow the devicetree bindings. * tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm: dts: ti: omap: Fix OPP table node names arm: dts: ti: omap: am5729-beagleboneai: Drop the OPP arm: dts: ti: omap: omap36xx: Rename opp_supply nodename ARM: dts: ti: add missing space before { ARM: dts: ti: split interrupts per cells ARM: dts: Unify pinctrl-single pin group nodes for davinci Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com-3Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v6.6/dt-bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Devicetree binding changes for omaps for v6.6 Just one change to get started on SoC yaml binding changes for omaps. * tag 'omap-for-v6.6/dt-bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: dt-bindings: omap: Partially convert omap.txt to yaml Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - Add D1 GPADC node - Introduce support for OrangePi Zero 3 SBC - Enable DT overlay support for Allwinner H3 boards * tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT riscv: dts: allwinner: d1: Add GPADC node Link: https://lore.kernel.org/r/20230806180546.GA127039@jernej-laptopSigned-off-by:
-
Rob Herring authored
The defined value for "status" is "disabled", not "disable". Reviewed-by:
Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230804225813.12493-1-robh@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-arm64-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.6: - Add initial support for A311D2 - Add AN400 board - Add gpio_intc, power domain for C3 SoC - Again some DT bindings fixes & cleanups * tag 'amlogic-arm64-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: drop cooling-[min|max]-state from pwm-fan arm64: dts: amlogic: meson-g12-common: change aobus-pinctrl node name arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name arm64: dts: amlogic: drop redundant status=okay in sound nodes arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios arm64: dts: add support for C3 power domain controller arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs arm64: dts: add board AN400 dt-bindings: arm: amlogic: add board AN400 arm64: dts: amlogic: minor whitespace cleanup around '=' arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree dt-bindings: arm: amlogic: add Amlogic A311D2 bindings Link: https://lore.kernel.org/r/d5f95654-ebcd-bd37-02f9-840e50b17e44@linaro.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt Armv8 Juno/FVP update for v6.6 Just a single minor whitespace cleanup in couple of FVP device trees. * tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: arm: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/20230804123223.3258086-1-sudeep.holla@arm.comSigned-off-by:
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
arm64: ZynqMP DT changes for v6.6 - Describe caches - Fix i2c gpio recovery description - Setting up default i2c frequency - Describe GEM TSU clock and assigned rates for SOMs - Reserved 1MB for internal firmware usage - Fix dwc3 IRQ description - Describe interrupts by using macros * tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Describe interrupts by using macros arm64: zynqmp: Fix dwc3 usb interrupt description arm64: zynqmp: Add memory reserved node for k26 Kria SOM board arm64: zynqmp: Assign TSU clock frequency for GEMs arm64: zynqmp: Setting default i2c clock frequency to 400kHz arm64: zynqmp: Fix open drain warning on ZynqMP arm64: zynqmp: Add L2 cache nodes Link: https://lore.kernel.org/r/fde6d7b4-c751-219d-3ec5-04e5bad2aa17@monstr.euSigned-off-by:
-
https://github.com/hisilicon/linux-hisiArnd Bergmann authored
ARM: DT: HiSilicon ARM32 DT updates for v6.6 - Fix "status" values * tag 'hisi-arm32-dt-for-6.6' of https://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: Fix "status" values Link: https://lore.kernel.org/r/64CC9B21.70907@hisilicon.comSigned-off-by:
-
https://github.com/hisilicon/linux-hisiArnd Bergmann authored
ARM64: DT: HiSilicon ARM64 DT updates for v6.6 - Miscellaneous fixes according the DTS coding style - Correct the clocks order of the sd0 for the hi3798cv200 * tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi: arm64: dts: hi3798cv200: Fix clocks order of sd0 arm64: dts: hisilicon: add missing space before { arm64: dts: hisilicon: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/64CC99A3.5030701@hisilicon.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'microchip-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip ARM64 device tree updates for 6.6 It contains: - one cleanup patch that removes whitespaces around '=' * tag 'microchip-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm64: dts: microchip: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/20230804044132.231508-1-claudiu.beznea@tuxon.devSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxArnd Bergmann authored
AT91 device tree updates for 6.6 It contains: - TCB timer nodes adition for at91-sama5d3_ksz9477_evb board - device tee cleanups * tag 'at91-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: remove duplicated entries ARM: dts: microchip: split interrupts per cells ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5 ARM: dts: at91: ksz9477_evb: Add missing timer nodes ARM: dts: at91-vinco: Fix "status" values ARM: dts: microchip: add missing space before { ARM: dts: microchip: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/20230804044102.231448-1-claudiu.beznea@tuxon.devSigned-off-by:
-
Krzysztof Kozlowski authored
Each interrupt should be in its own cell. This is much more readable. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230730111536.98164-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.6 - Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC, - Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L SMARC EVK development boards, - Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs, - Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC, - Add LED support for the Spider development board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: spider-cpu: Add GP LEDs arm64: dts: renesas: r8a779f0: Add INTC-EX node arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3 arm64: dts: renesas: r9a07g043: Add MTU3a node ARM dts: renesas: armadillo800eva: Switch to enable-gpios arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0 riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3 arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3 arm64: dts: renesas: Add missing space before { ARM: dts: renesas: Add missing space before { arm64: dts: renesas: Minor whitespace cleanup around '=' arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC arm64: dts: renesas: r9a09g011: Add CSI nodes arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.6-rc1 The majority of this is fixes all over the place for DT schema validation warnings. However, there are also cleanups for some things in DT and audio support is added on IGX Orin. Jetson Orin NX and Nano also gain a new thermal trip point to help keep the device cool at moderate loads. * tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (22 commits) arm64: tegra: Add blank lines for better readability arm64: tegra: Remove {clock,reset}-names from VIC powergate arm64: tegra: Drop incorrect maxim,disable-etr on Smaug arm64: tegra: Add SPI device tree nodes for Tegra234 arm64: tegra: Enable UARTA and UARTE for Orin Nano arm64: tegra: Add UARTE device tree node on Tegra234 arm64: tegra: Adapt to LP855X bindings changes arm64: tegra: Add PCIe and DP 3.3V supplies arm64: tegra: Add missing reset-names for Tegra HS UART arm64: tegra: Remove current-speed for SBSA UART arm64: tegra: smaug: Remove reg-shift for high-speed UART arm64: tegra: Remove dmas and dma-names for debug UART arm64: tegra: Add 35°C trip point for Jetson Orin NX/Nano arm64: tegra: Remove duplicate PCI nodes arm64: tegra: Sort PCI nodes correctly on Orin arm64: tegra: Add audio support for IGX Orin arm64: tegra: Update CPU OPP tables arm64: tegra: Fix HSUART for Smaug arm64: tegra: Fix HSUART for Jetson AGX Orin arm64: tegra: Add missing alias for NVIDIA IGX Orin ... Link: https://lore.kernel.org/r/20230728094129.3587109-4-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-6.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.6-rc1 This contains various fixes for DT schema validation and the Pegatron Chagall and Nexus 7 get specific compatible strings for the panels that they use. * tag 'tegra-for-6.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Provide specific compatible string for Nexus 7 panel ARM: tegra: Use Hannstar HSD101PWW2 on Pegatron Chagall ARM: tegra: Reuse I2C3 for NVEC ARM: tegra: Add missing reset-names for Tegra HS UART ARM: tegra: Remove reset-names for UART devices ARM: tegra: Remove dmas and dma-names for debug UART Link: https://lore.kernel.org/r/20230728094129.3587109-3-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-6.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt dt-bindings: Changes for v6.6-rc1 A number of Tegra-specific bindings are converted to json-schema and the reserved-memory and BPMP bindings get support for Tegra264. * tag 'tegra-for-6.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: firmware: Add support for tegra186-bpmp DRAM MRQ GSCs dt-bindings: reserved-memory: Add support for DRAM MRQ GSCs dt-bindings: thermal: tegra: Convert to json-schema dt-bindings: arm: tegra: nvec: Convert to json-schema dt-bindings: clock: tegra: Document Tegra132 compatible dt-bindings: cpu: Document NVIDIA Tegra186 CCPLEX cluster dt-bindings: serial: tegra-hsuart: Convert to json-schema dt-bindings: arm: tegra: ahb: Convert to json-schema dt-bindings: arm: tegra: flowctrl: Convert to json-schema Link: https://lore.kernel.org/r/20230728094129.3587109-2-thierry.reding@gmail.comSigned-off-by:
-
- 10 Aug, 2023 16 commits
-
-
Dylan Hung authored
Add pinctrl support for the I3C1 and I3C2 pins. Signed-off-by:
Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by:
Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230809134413.3614535-1-dylan_hung@aspeedtech.comSigned-off-by:
Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
Other systems have the SoC devices listed before the FSI description. Move them up in order to make them similar. Link: https://lore.kernel.org/r/20230809074921.116987-6-joel@jms.id.auSigned-off-by:
-
Eddie James authored
Use the P10 quad FSI CFAM description to reduce duplication and add the I2C responders and associated engines. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230809074921.116987-5-joel@jms.id.auSigned-off-by:
-
Joel Stanley authored
Use the P10 quad FSI CFAM description to reduce duplication. Link: https://lore.kernel.org/r/20230809074921.116987-4-joel@jms.id.auSigned-off-by:
-
Joel Stanley authored
Use the P10 dual FSI CFAM description to reduce duplication. Link: https://lore.kernel.org/r/20230809074921.116987-3-joel@jms.id.auSigned-off-by:
-
Eddie James authored
These will be used by BMCs attached to a IBM Power10 server CPU. Signed-off-by:
-
Delphine CC Chiu authored
Add linux device tree entry for Yosemite 4 devices connected to BMC. The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC. Signed-off-by:
Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Acked-by:
-
Delphine CC Chiu authored
Document the new compatibles used on Facebook Yosemite 4. Signed-off-by:
-
Tao Ren authored
Set eMMC max frequency to 25MHz to prevent intermittent eMMC access failures. Signed-off-by:
Tao Ren <rentao.bupt@gmail.com> Reviewed-by:
-
Tao Ren authored
Enable ASPEED-ADC channels 5-8 to support voltage monitoring of all the Wedge400 hardware revisions. Signed-off-by:
-
Tao Ren authored
Set FMC controller to "spi0" in ast2500-facebook-netbmc-common.dtsi so the spi bus is consistent with the flash labels defined in flash layout. Signed-off-by:
-
Lakshmi Yadlapati authored
TPM is disabled in Rainier, remove TPM device. Signed-off-by:
Lakshmi Yadlapati <lakshmiy@us.ibm.com> Link: https://lore.kernel.org/r/20230725141606.1641080-2-lakshmiy@us.ibm.comSigned-off-by:
-
Joel Stanley authored
The AST2600 has two more vuarts, placed between the existing two in the memory map. Link: https://lore.kernel.org/r/20230620042257.73665-1-joel@jms.id.auSigned-off-by:
-
Chanh Nguyen authored
Enable MCTP driver on I2C3 bus for MCTP transaction Signed-off-by:
Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20230620092537.20007-4-chanh@os.amperecomputing.comSigned-off-by:
-
Chanh Nguyen authored
Change to use I2C ADC controller (ltc2497) for Mt.Mitchell DVT and later hardware. Signed-off-by:
-
Chanh Nguyen authored
The BMC UART8 and UART9 were connected to the Secpro and Mpro console of socket S1 on the Mt.Mitchell system. Signed-off-by:
-
- 06 Aug, 2023 4 commits
-
-
Felix Moessbauer authored
Add the '-@' DTC option for the sun8i-h3 pi-class devices. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (for instance from the firmware or the bootloader) on these devices. These devices allow various modules to be connected and this enables users to create out-of-tree device-tree overlays for these modules. Please note that this change does increase the size of the resulting DTB by ~30%. For example, with v6.4 increase in size is as follows: 22909 -> 29564 sun8i-h3-orangepi-lite.dtb 24214 -> 30935 sun8i-h3-bananapi-m2-plus.dtb 23915 -> 30664 sun8i-h3-nanopi-m1-plus.dtb 22969 -> 29537 sun8i-h3-nanopi-m1.dtb 24157 -> 30836 sun8i-h3-nanopi-duo2.dtb 24110 -> 30845 sun8i-h3-orangepi-plus2e.dtb 23472 -> 30037 sun8i-h3-orangepi-one.dtb 24600 -> 31410 sun8i-h3-orangepi-plus.dtb 23618 -> 30230 sun8i-h3-orangepi-2.dtb 22170 -> 28548 sun8i-h3-orangepi-zero-plus2.dtb 23258 -> 29795 sun8i-h3-nanopi-neo-air.dtb 23113 -> 29699 sun8i-h3-zeropi.dtb 22803 -> 29270 sun8i-h3-nanopi-neo.dtb 24674 -> 31318 sun8i-h3-nanopi-r1.dtb 23477 -> 30038 sun8i-h3-orangepi-pc.dtb 24622 -> 31380 sun8i-h3-bananapi-m2-plus-v1.2.dtb 23750 -> 30366 sun8i-h3-orangepi-pc-plus.dtb Signed-off-by:
Felix Moessbauer <felix.moessbauer@siemens.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230627133703.355893-1-felix.moessbauer@siemens.comSigned-off-by:
-
Andre Przywara authored
The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC, which seems to be just an H616 with more L2 cache. The board itself is a slightly updated version of the Orange Pi Zero 2. It features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2) - AXP313a PMIC (more capable AXP305 on the Zero2) - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2) - 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chip Add the devicetree file describing the currently supported features, namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at the moment, though the basic functionality works. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
-
Andre Przywara authored
The Orange Pi Zero 3 board is an updated version of the Zero 2 board. It uses a SoC called H618, which just seems to be an H616 with more L2 cache. Add the board/SoC compatible string pair to the list of known boards. Signed-off-by:
-
Andre Przywara authored
The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some DT nodes with the Zero 2, but comes with a different PMIC. Move the common parts (except the PMIC) into a new shared file, and include that from the existing board .dts file. No functional change, the generated DTB is the same, except for some phandle numbering differences. Signed-off-by:
-
- 04 Aug, 2023 1 commit
-
-
Claudiu Beznea authored
Remove duplicated DTC_FLAGS_<board> := -@ entries which intends to enable the building of device tree overlays. Commit 724ba675 ("ARM: dts: Move .dts files to vendor sub-directories") added those entries at the beginning of file w/o removing the already available entries spread though file. Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230721053918.33944-1-claudiu.beznea@tuxon.devSigned-off-by:
Claudiu Beznea <claudiu.beznea@tuxon.dev>
-
- 03 Aug, 2023 1 commit
-
-
David Yang authored
"ciu" and "biu" were incorrectly swapped. Fix their order. Signed-off-by:
David Yang <mmyangfl@gmail.com> Signed-off-by:
Wei Xu <xuwei5@hisilicon.com>
-
- 02 Aug, 2023 1 commit
-
-
Krzysztof Kozlowski authored
Each interrupt should be in its own cell. This is much more readable. Signed-off-by:
-
