Pull more drm fixes from Dave Airlie:
 "This is the fixes for the last couple of weeks for i915 and last 3
  weeks for amdgpu, lots of them but pretty scattered around and all
  pretty small.

  amdgpu:
   - SR-IOV fixes
   - DCN 3.2 fixes
   - DC mclk handling fixes
   - eDP fixes
   - SubVP fixes
   - HDCP regression fix
   - DSC fixes
   - DC FP fixes
   - DCN 3.x fixes
   - Display flickering fix when switching between vram and gtt
   - Z8 power saving fix
   - Fix hang when skipping modeset
   - GPU reset fixes
   - Doorbell fix when resizing BARs
   - Fix spurious warnings in gmc
   - Locking fix for AMDGPU_SCHED IOCTL
   - SR-IOV fix
   - DCN 3.1.4 fix
   - DCN 3.2 fix
   - Fix job cleanup when CS is aborted

  i915:
   - skl pipe source size check
   - mtl transcoder mask fix
   - DSI power on sequence fix
   - GuC versioning corner case fix"

* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
  drm/amdgpu: drop redundant sched job cleanup when cs is aborted
  drm/amd/display: filter out invalid bits in pipe_fuses
  drm/amd/display: Change default Z8 watermark values
  drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
  drm/amdgpu: add a missing lock for AMDGPU_SCHED
  drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
  drm/amdgpu: Enable doorbell selfring after resize FB BAR
  drm/amdgpu: Use the default reset when loading or reloading the driver
  drm/amdgpu: Fix mode2 reset for sienna cichlid
  drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
  drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
  drm/i915/guc: Actually return an error if GuC version range check fails
  drm/amd/display: Lowering min Z8 residency time
  drm/amd/display: fix flickering caused by S/G mode
  drm/amd/display: Set min_width and min_height capability for DCN30
  drm/amd/display: Isolate remaining FPU code in DCN32
  drm/amd/display: Update bounding box values for DCN321
  drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - Add watchdog driver for StarFive JH7100 and JH7110 Soc

 - Add Rockchip RK3588 devices

 - Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices

 - Add Mediatke MT8365 and MT6735 devices

 - Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog

 - Convert watchdog platform drivers to return void on the remove
   callback

 - Convert to devm_clk_get_enabled() helpers

 - ... and other small fixes and improvements

* tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits)
  watchdog: dw_wdt: Simplify clk management
  watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe()
  watchdog: starfive: Fix the warning of starfive_wdt_match
  watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled
  MAINTAINERS: Add fragment for Xilinx watchdog driver
  watchdog: menz069_wdt: fix timeout setting
  watchdog: menz069_wdt: fix watchdog initialisation
  dt-bindings: watchdog: alphascale-asm9260: convert to DT schema
  watchdog: loongson1_wdt: Implement restart handler
  dt-bindings: watchdog: Document Qualcomm SM6115 watchdog
  dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names
  dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties
  dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties
  dt-bindings: watchdog: arm,sp805: drop unneeded minItems
  dt-bindings: watchdog: drop duplicated GPIO watchdog bindings
  dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT
  drivers: watchdog: Add StarFive Watchdog driver
  dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110
  dt-bindings: watchdog: indentation, quotes and white-space cleanup
  watchdog: ebc-c384_wdt: Mark status as orphaned
  ...

Merge tag 'drm-intel-next-fixes-2023-05-04-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Add missing GPU transcoder masks for MTL and fix DSI power on sequence
for Nextbook Ares 8A. Fix GuC version corner case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.4-2023-05-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.4-2023-05-03:

amdgpu:
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

One cc stable for pipe source size check on SKL+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.4-2023-04-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.4-2023-04-26:

amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com

Pull ceph updates from Ilya Dryomov:
 "A few filesystem improvements, with a rather nasty use-after-free fix
  from Xiubo intended for stable"

* tag 'ceph-for-6.4-rc1' of https://github.com/ceph/ceph-client:
  ceph: reorder fields in 'struct ceph_snapid_map'
  ceph: pass ino# instead of old_dentry if it's disconnected
  ceph: fix potential use-after-free bug when trimming caps
  ceph: implement writeback livelock avoidance using page tagging
  ceph: do not print the whole xattr value if it's too long

Pull 9p updates from Eric Van Hensbergen:
 "This includes a number of patches that didn't quite make the cut last
  merge window while we addressed some outstanding issues and review
  comments. It includes some new caching modes for those that only want
  readahead caches and reworks how we do writeback caching so we are not
  keeping extra references around which both causes performance problems
  and uses lots of additional resources on the server.

  It also includes a new flag to force disabling of xattrs which can
  also cause major performance issues, particularly if the underlying
  filesystem on the server doesn't support them.

  Finally it adds a couple of additional mount options to better support
  directio and enabling caches when the server doesn't support
  qid.version.

  There was one late-breaking bug report that has also been included as
  its own patch where I forgot to propagate an embarassing bit-logic fix
  to the various variations of open"

* tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Fix bit operation logic error
  fs/9p: Rework cache modes and add new options to Documentation
  fs/9p: remove writeback fid and fix per-file modes
  fs/9p: Add new mount modes
  9p: Add additional debug flags and open modes
  fs/9p: allow disable of xattr support on mount
  fs/9p: Remove unnecessary superblock flags
  fs/9p: Consolidate file operations and add readahead and writeback

Merge tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull hitfixes from Andrew Morton:
 "Five hotfixes.  Three are cc:stable, two for this -rc cycle"

* tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: change per-VMA lock statistics to be disabled by default
  MAINTAINERS: update Michal Simek's email
  mm/mempolicy: correctly update prev when policy is equal on mbind
  relayfs: fix out-of-bounds access in relay_file_read
  kasan: hw_tags: avoid invalid virt_to_page()

Pull more MM updates from Andrew Morton:

 - Some DAMON cleanups from Kefeng Wang

 - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
   ioctl's behavior more similar to KSM's behavior.

[ Andrew called these "final", but I suspect we'll have a series fixing
  up the fact that the last commit in the dmapools series in the
  previous pull seems to have unintentionally just reverted all the
  other commits in the same series..   - Linus ]

* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: hwpoison: coredump: support recovery from dump_user_range()
  mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
  mm/ksm: move disabling KSM from s390/gmap code to KSM code
  selftests/ksm: ksm_functional_tests: add prctl unmerge test
  mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
  mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
  mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
  mm/damon/paddr: minor refactor of damon_pa_pageout()

Pull arm64 fixes from Will Deacon:
 "A few arm64 fixes that came in during the merge window for -rc1.

  The main thing is restoring the pointer authentication hwcaps, which
  disappeared during some recent refactoring

   - Fix regression in CPU erratum workaround when disabling the MMU

   - Fix detection of pointer authentication hwcaps

   - Avoid writeable, executable ELF sections in vmlinux"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: lds: move .got section out of .text
  arm64: kernel: remove SHF_WRITE|SHF_EXECINSTR from .idmap.text
  arm64: cpufeature: Fix pointer auth hwcaps
  arm64: Fix label placement in record_mmu_state()

Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Better backtraces for humanization

 - Relay BCE exceptions to userland as SIGSEGV

 - Provide kernel fpu functions

 - Optimize memory ops (memset/memcpy/memmove)

 - Optimize checksum and crc32(c) calculation

 - Add ARCH_HAS_FORTIFY_SOURCE selection

 - Add function error injection support

 - Add ftrace with direct call support

 - Add basic perf tools support

* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  tools/perf: Add basic support for LoongArch
  LoongArch: ftrace: Add direct call trampoline samples support
  LoongArch: ftrace: Add direct call support
  LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
  LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
  LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
  LoongArch: Add support for function error injection
  LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
  LoongArch: crypto: Add crc32 and crc32c hw acceleration
  LoongArch: Add checksum optimization for 64-bit system
  LoongArch: Optimize memory ops (memset/memcpy/memmove)
  LoongArch: Provide kernel fpu functions
  LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
  LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
  LoongArch: Humanize the ESTAT line when showing registers
  LoongArch: Humanize the ECFG line when showing registers
  LoongArch: Humanize the EUEN line when showing registers
  LoongArch: Humanize the PRMD line when showing registers
  LoongArch: Humanize the CRMD line when showing registers
  LoongArch: Fix format of CSR lines during show_regs()
  ...

Pull arch/csky updates from Guo Ren:

 - Remove CPU_TLB_SIZE config

 - Prevent spurious page faults

* tag 'csky-for-linus-6.4' of https://github.com/c-sky/csky-linux:
  csky: mmu: Prevent spurious page faults
  csky: remove obsolete config CPU_TLB_SIZE

Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2 ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
Reading pipe_fuses from register may have invalid bits set, which may
 affect the num_pipes erroneously.

[How]
Add read_pipes_fuses() call and filter bits based on expected number
 of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

mgr->ctx_handles should be protected by mgr->lock.

v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As made mention of in commit 08c677cb ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af5561
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.

[   82.340264] Call Trace:
[   82.340265]  <TASK>
[   82.340269]  gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[   82.340447]  gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[   82.340623]  amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[   82.340789]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[   82.340955]  amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[   82.341122]  amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[   82.341359]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[   82.341529]  process_one_work+0x21d/0x3f0
[   82.341535]  worker_thread+0x1fa/0x3c0
[   82.341538]  ? process_one_work+0x3f0/0x3f0
[   82.341540]  kthread+0xff/0x130
[   82.341544]  ? kthread_complete_and_exit+0x20/0x20
[   82.341547]  ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org

The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.

[  102.980303] Call Trace:
[  102.980303]  <TASK>
[  102.980304]  gmc_v11_0_hw_fini+0x54/0x90 [amdgpu]
[  102.980357]  gmc_v11_0_suspend+0xe/0x20 [amdgpu]
[  102.980409]  amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[  102.980459]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[  102.980520]  amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[  102.980573]  amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[  102.980687]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[  102.980740]  process_one_work+0x21f/0x3f0
[  102.980741]  worker_thread+0x200/0x3e0
[  102.980742]  ? process_one_work+0x3f0/0x3f0
[  102.980743]  kthread+0xfd/0x130
[  102.980743]  ? kthread_complete_and_exit+0x20/0x20
[  102.980744]  ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org

[Why]
The selfring doorbell aperture will change when resize FB
BAR successfully during gmc sw init, we should reorder
the sequence of enabling doorbell selfring aperture.

[How]
Move enable_doorbell_selfring_aperture from *_common_hw_init
to *_common_late_init.

This fixes the potential issue that GPU ring its own
doorbell when this device is in translated mode when
iommu is on.

v2: Remove *_enable_doorbell_aperture functions (Christian)
v3: Add comments to note that why we need enable doorbell
    selfring late (Christian)
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Below call trace and errors are observed when reloading
amdgpu driver with the module parameter reset_method=3.

It should do a default reset when loading or reloading the
driver, regardless of the module parameter reset_method.

v2: add comments inside and modify commit messages.

[  +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed
and response status is (0x0)
[  +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc
[  +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed!
[  +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to
clear memory with ring turned off.
[  +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu]
[  +0.000004] Call Trace:
[  +0.000003]  <TASK>
[  +0.000008]  ttm_bo_release+0x2c4/0x330 [amdttm]
[  +0.000026]  amdttm_bo_put+0x3c/0x70 [amdttm]
[  +0.000020]  amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu]
[  +0.000728]  psp_v11_0_ring_destroy+0x34/0x60 [amdgpu]
[  +0.000826]  psp_hw_init+0xe7/0x2f0 [amdgpu]
[  +0.000813]  amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu]
[  +0.000731]  amdgpu_device_init.cold+0x108e/0x2002 [amdgpu]
[  +0.001071]  ? do_pci_enable_device+0xe1/0x110
[  +0.000011]  amdgpu_driver_load_kms+0x1a/0x160 [amdgpu]
[  +0.000729]  amdgpu_pci_probe+0x179/0x3a0 [amdgpu]
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Before this change, sienna_cichlid_get_reset_handler will always
return NULL, although the module parameter reset_method is 3
when loading amdgpu driver.
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull parisc updates from Helge Deller:
 "Two important fixes in here:

   - The argument pointer register was wrong when calling 64-bit
     firmware functions, which may cause random memory corruption or
     crashes.

   - Ensure page alignment in cache flush functions, otherwise not all
     memory might get flushed.

  The rest are cleanups (mmap implementation, panic path) and usual
  smaller updates.

  Summary:

   - Calculate correct argument pointer in real64_call_asm()

   - Cleanup mmap implementation regarding color alignment (John David
     Anglin)

   - Spinlock fixes in panic path (Guilherme G. Piccoli)

   - build doc update for parisc64 (Randy Dunlap)

   - Ensure page alignment in flush functions"

* tag 'parisc-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix argument pointer in real64_call_asm()
  parisc: Cleanup mmap implementation regarding color alignment
  parisc: Drop HP-UX constants and structs from grfioctl.h
  parisc: Ensure page alignment in flush functions
  parisc: Replace regular spinlock with spin_trylock on panic path
  parisc: update kbuild doc. aliases for parisc64
  parisc: Limit amount of kgdb breakpoints on parisc

Pull modules fix from Luis Chamberlain:
 "One fix by Arnd far for modules which came in after the first pull
  request.

  The issue was found as part of some late compile tests with 0-day. I
  take it 0-day does some secondary late builds with after some initial
  ones"

* tag 'modules-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: include internal.h in module/dups.c

Pull more sysctl updates from Luis Chamberlain:
 "As mentioned on my first pull request for sysctl-next, for v6.4-rc1
  we're very close to being able to deprecating register_sysctl_paths().
  I was going to assess the situation after the first week of the merge
  window.

  That time is now and things are looking good. We only have one which
  had already an ACK for so I'm picking this up here now and the last
  patch is the one that uses an axe.

  I have boot tested the last patch and 0-day build completed
  successfully"

* tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: remove register_sysctl_paths()
  kernel: pid_namespace: simplify sysctls with register_sysctl()

Pull uml updates from Richard Weinberger:

 - Make stub data pages configurable

 - Make it harder to mix user and kernel code by accident

* tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
  um: make stub data pages size tweakable
  um: prevent user code in modules
  um: further clean up user_syms
  um: don't export printf()
  um: hostfs: define our own API boundary
  um: add __weak for exported functions

Pull UBI and UBIFS updates from Richard Weinberger:
 "UBI:

   - Fix error value for try_write_vid_and_data()

   - Minor cleanups

  UBIFS:

   - Fixes for various memory leaks

   - Minor cleanups"

* tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Fix memleak when insert_old_idx() failed
  Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
  ubifs: Fix memory leak in do_rename
  ubifs: Free memory for tmpfile name
  ubi: Fix return value overwrite issue in try_write_vid_and_data()
  ubifs: Remove return in compr_exit()
  ubi: Simplify bool conversion

Pull more power management updates from Rafael Wysocki:
 "These fix a hibernation test mode regression and clean up the
  intel_idle driver.

  Specifics:

   - Make test_resume work again after the changes that made hibernation
     open the snapshot device in exclusive mode (Chen Yu)

   - Clean up code in several places in intel_idle (Artem Bityutskiy)"

* tag 'pm-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: mark few variables as __read_mostly
  intel_idle: do not sprinkle module parameter definitions around
  intel_idle: fix confusing message
  intel_idle: improve C-state flags handling robustness
  intel_idle: further intel_idle_init_cstates_icpu() cleanup
  intel_idle: clean up intel_idle_init_cstates_icpu()
  intel_idle: use pr_info() instead of printk()
  PM: hibernate: Do not get block device exclusively in test_resume mode
  PM: hibernate: Turn snapshot_test into global variable

Pull more ACPI updates from Rafael Wysocki:
 "These add two ACPI-related quirks and extend support for Apple device
  properties supplied via ACPI _DSM.

  Specifics:

   - Do not turn off unused power resources during initialization on the
     Toshiba Click Mini (Hans de Goede)

   - Support strings in device properties supplied by ACPI _DSM on Apple
     platforms (Hector Martin)

   - Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch)"

* tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: property: Support strings in Apple _DSM props
  ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001
  ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini

Pull more thermal control updates from Rafael Wysocki:
 "These are mostly cleanups on top of the previously merged thermal
  control changes plus some driver fixes and the removal of the Intel
  Menlow thermal driver.

  Specifics:

   - Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
     check warning (Stefan Wahren)

   - Update the example in the DT bindings to reflect changes with the
     ADC node name for QCom TM and TM5 (Marijn Suijten)

   - Fix comments for the cpuidle_cooling_register() function to match
     the function prototype (Chenggang Wang)

   - Fix inconsistent temperature read and some Mediatek variant board
     reboot by reverting a change and handling the temperature
     differently (AngeloGioacchino Del Regno)

   - Fix a memory leak in the initialization error path for the Mediatek
     driver (Kang Chen)

   - Use of_address_to_resource() in the Mediatek driver (Rob Herring)

   - Fix unit address in the QCom tsens driver DT bindings (Krzysztof
     Kozlowski)

   - Clean up the step-wise thermal governor (Zhang Rui)

   - Introduce thermal_zone_device() for accessing the device field of
     struct thermal_zone_device and two drivers use it (Daniel Lezcano)

   - Clean up the ACPI thermal driver a bit (Daniel Lezcano)

   - Delete the thermal driver for Intel Menlow platforms that is not
     expected to have any users (Rafael Wysocki)"

* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: menlow: Get rid of this driver
  ACPI: thermal: Move to dedicated function sysfs extra attr creation
  ACPI: thermal: Use thermal_zone_device()
  thermal: intel: pch_thermal: Use thermal driver device to write a trace
  thermal: core: Encapsulate tz->device field
  thermal: gov_step_wise: Adjust code logic to match comment
  thermal: gov_step_wise: Delete obsolete comment
  dt-bindings: thermal: qcom-tsens: Correct unit address
  thermal/drivers/mediatek: Use of_address_to_resource()
  thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
  thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
  thermal/drivers/mediatek: Add temperature constraints to validate read
  Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
  thermal/drivers/cpuidle_cooling: Delete unmatched comments
  dt-bindings: thermal: Use generic ADC node name in examples
  dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible

Merge tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The bulk of this is trivial conversions to the new .remove_new()
  callback for drivers as part of Uwe's effort to clean that up.

  Other than that a driver is added for Apple devices and various small
  fixes are included for existing drivers.

  Last but not least, this finally gets rid of the old pwm_request() and
  pwm_free() APIs are removed since the last user was dropped in v6.3"

* tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
  pwm: Remove unused radix tree
  pwm: Delete deprecated functions pwm_request() and pwm_free()
  pwm: meson: Fix g12a ao clk81 name
  pwm: meson: Fix axg ao mux parents
  pwm: stm32: Enforce settings for PWM capture
  MAINTAINERS: Add entries for Apple PWM driver
  pwm: Add Apple PWM controller
  dt-bindings: pwm: Add Apple PWM controller
  pwm: mtk-disp: Configure double buffering before reading in .get_state()
  pwm: mtk-disp: Disable shadow registers before setting backlight values
  pwm: stm32-lp: Drop of_match_ptr for ID table
  pwm: rcar: Drop of_match_ptr for ID table
  dt-bindings: pwm: Convert Amlogic Meson PWM binding
  dt-bindings: pwm: mediatek: Add mediatek,mt7986 compatible
  pwm: xilinx: Convert to platform remove callback returning void
  pwm: vt8500: Convert to platform remove callback returning void
  pwm: tiehrpwm: Convert to platform remove callback returning void
  pwm: tiecap: Convert to platform remove callback returning void
  pwm: tegra: Convert to platform remove callback returning void
  pwm: sun4i: Convert to platform remove callback returning void
  ...

Pull soundwire updates from Vinod Koul:
 "This features AMD soundwire controller driver, a bunch of Intel
  changes for future platform support, sdw API updates etc:

   - Support for AMD soundwire controller

   - Intel driver updates to support future platforms

   - Core API sdw_nread/nwrite_no_pm updates to handle page boundaries"

* tag 'soundwire-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (38 commits)
  soundwire: intel_auxdevice: improve pm_prepare step
  soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow
  soundwire: intel: don't save hw_params for use in prepare
  soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries
  soundwire: bus: Update kernel doc for no_pm functions
  soundwire: bus: Remove now outdated comments on no_pm IO
  soundwire: stream: uniquify dev_err() logs
  soundwire: stream: remove bus->dev from logs on multiple buses
  soundwire: amd: add pm_prepare callback and pm ops support
  soundwire: amd: handle SoundWire wake enable interrupt
  soundwire: amd: add runtime pm ops for AMD SoundWire manager driver
  soundwire: amd: add SoundWire manager interrupt handling
  soundwire: amd: enable build for AMD SoundWire manager driver
  soundwire: amd: register SoundWire manager dai ops
  soundwire: amd: Add support for AMD Manager driver
  soundwire: export sdw_compute_slave_ports() function
  soundwire: stream: restore cumulative bus bandwidth when compute_params callback failed
  soundwire: bandwidth allocation: Use hweight32() to calculate set bits
  soundwire: qcom: gracefully handle too many ports in DT
  soundwire: qcom: define hardcoded version magic numbers
  ...

Pull phy updates from Vinod Koul:
 "New support:
   - UFS PHY for Qualcomm SA8775p, SM7150
   - PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
   - Mediatke hdmi phy support for mt8195
   - rockchip naneng combo phy support for RK358

  Updates:
   - Drop Thunder Bay eMMC PHY driver
   - RC support for PCIe phy for Qualcomm SDX55
   - SGMII support in WIZ driver for J721E
   - PCIe and multilink SGMII PHY support in cadence driver
   - Big pile of platform remove callback returning void conversions"

* tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
  phy: cadence: cdns-dphy-rx: Add common module reset support
  phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
  dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G
  phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
  phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration
  phy: mediatek: add support for phy-mtk-hdmi-mt8195
  phy: phy-mtk-hdmi: Add generic phy configure callback
  dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
  phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
  dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names
  dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks
  dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type
  dt-bindings: phy: cadence-torrent: drop assigned-clocks
  dt-bindings: phy: cadence-sierra: drop assigned-clocks
  phy: rockchip: remove unused hw_to_inno function
  phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
  dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl
  phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
  phy: qcom-qmp-ufs: Add SM7150 support
  ...

Pull dmaengine updates from Vinod Koul:
 "New support:

   - Apple admac t8112 device support

   - StarFive JH7110 DMA controller

  Updates:

   - Big pile of idxd updates to support IAA 2.0 device capabilities,
     DSA 2.0 Event Log and completion record faulting features and
     new DSA operations

   - at_xdmac supend & resume updates and driver code cleanup

   - k3-udma supend & resume support

   - k3-psil thread support for J784s4"

* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
  dmaengine: idxd: add per wq PRS disable
  dmaengine: idxd: add pid to exported sysfs attribute for opened file
  dmaengine: idxd: expose fault counters to sysfs
  dmaengine: idxd: add a device to represent the file opened
  dmaengine: idxd: add per file user counters for completion record faults
  dmaengine: idxd: process batch descriptor completion record faults
  dmaengine: idxd: add descs_completed field for completion record
  dmaengine: idxd: process user page faults for completion record
  dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
  dmaengine: idxd: create kmem cache for event log fault items
  dmaengine: idxd: add per DSA wq workqueue for processing cr faults
  dmanegine: idxd: add debugfs for event log dump
  dmaengine: idxd: add interrupt handling for event log
  dmaengine: idxd: setup event log configuration
  dmaengine: idxd: add event log size sysfs attribute
  dmaengine: idxd: make misc interrupt one shot
  dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
  dt-bindings: dma: Drop unneeded quotes
  dmaengine: at_xdmac: align declaration of ret with the rest of variables
  dmaengine: at_xdmac: add a warning message regarding for unpaused channels
  ...

Pull hardware timestamp engine updates from Dipen Patel:
 "The changes for the hte subsystem include:

   - Add Tegra234 HTE provider and relevant DT bindings

   - Update MAINTAINERS file for the HTE subsystem"

* tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
  hte: tegra-194: Use proper includes
  hte: Use device_match_of_node()
  hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
  hte: tegra: fix 'struct of_device_id' build error
  hte: Use of_property_present() for testing DT property presence
  gpio: tegra186: Add Tegra234 hte support
  hte: handle nvidia,gpio-controller property
  hte: Deprecate nvidia,slices property
  hte: Add Tegra234 provider
  hte: Re-phrase tegra API document
  arm64: tegra: Add Tegra234 GTE nodes
  dt-bindings: timestamp: Deprecate nvidia,slices property
  dt-bindings: timestamp: Add Tegra234 support
  MAINTAINERS: Add HTE/timestamp subsystem details

Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.

It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.

I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>

This change simplifies the randomization of file mapping regions. It
reworks the code to remove duplication. The flow is now similar to
that for mips. Finally, we consistently use the do_color_align variable
to determine when color alignment is needed.

Tested on rp3440.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>