- 15 Mar, 2023 16 commits
-
-
Tom Rix authored
cppcheck reports [drivers/net/wireless/intel/iwlwifi/mvm/rs.c:2686]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it? The setting of the 'sta' parameter is not needed. In the if-check that sets it to NULL, mvm_sta is also set to NULL. Then the next statement checks if mvm_sta is NULL and does an early return. So remove setting sta. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230314194113.711fe28cfdd6.I2f723f9d44f65720baaf3e84b72109759350a8f5@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Miri Korenblit authored
This is another patch in the series adding all the ops for the new MLD ieee80211_ops. The callback added here uses the new MLD FW API Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Miri Korenblit authored
Since parts of the functionality of this function is going to be used also by the MLD version of it, put in a separate function the parts that are common for both MLD and non-MLD modes. The common function will later be used in the MLD ops. Signed-off-by:
-
Miri Korenblit authored
This is another patch in the series adding all the ops for the new MLD ieee80211_ops. The callback added here uses the new MLD FW API. Signed-off-by:
-
Miri Korenblit authored
Since parts of the functionality of this function is going to be used also by the MLD version of it, put in a separate function the parts that are common for both MLD and non-MLD modes. The common function will later be used in the MLD ops. Signed-off-by:
-
Miri Korenblit authored
As the MLD mode and its new APIs are introduced, we've decided to add a new ieee80211_ops dedicated for MLD callbacks. Add the MLD remove_interface() callback which uses the new MLD APIs. Signed-off-by:
-
Miri Korenblit authored
As the MLD mode and its new APIs are introduced, we've decided to add a new ieee80211_ops dedicated for MLD callbacks. Add the MLD add_interface() callback which uses the new MLD APIs added the previous patches. Signed-off-by:
-
Miri Korenblit authored
As a part of the new MLD FW API changes, we have new commands for STA related operations (add/remove/aux/disable tx). Add structures and enum definitions, along with part of the functions that sends this commands. This functions will be in used and more will be added in the next patches. Signed-off-by:
-
Miri Korenblit authored
As a part of the new MLD FW API changes, we have a new LINK command to add/remove/configure a link. Add structures and enum definitions, along with the functions that sends this command (i.e. add, remove and change mac ctxt). These functions will be in used in the next patches. Signed-off-by:
-
Miri Korenblit authored
As a part of the new MLD FW API changes, we have a new MAC CTXT command. Add structures and enum definitions, along with the functions that sends this command (i.e. add, remove and change mac ctxt). This functions will be in used in the next patches. Signed-off-by:
-
Miri Korenblit authored
Refactor MAC_CONTEXT_CMD sending flow: 1. As the new MLD API is introduced, there are some common fields in both the old and new APIs. The MAC_CONTEXT_CMD of the non-MLD API has common fields with the link and mac commands of the new MLD API. Put this common parts in functions so it can be used later by the new MLD API. 2. Use iwl_mvm_mac_ctxt_send_cmd when removing a mac instead of implementing the same functionality once again. 3. Change the debug print when sending the command to be more specific, so it will be easy to distinguish later if the old or new mac command was sent. Signed-off-by:
-
Miri Korenblit authored
Refactor STA_HE_CTXT_CMD sending flow: 1. As the new MLD API is introduced, there are some common fields in both the old and new APIs. The STA_HE_CTXT_CMD of the non-MLD API has common fields with the link and mac commands of the new MLD API. Put this common parts in functions so it can be used later by the new MLD API. 2. The HE capability which indicates whether the NIC is ack-enabled or not is the same for all bands. No need to take it from the specific band which is currently in use. Take it from the low band - this simplifies the code and doesn't require a phy_ctxt. Signed-off-by:
-
Mukesh Sisodiya authored
Add driver defined dump file name extension for beacon loss and FW Assert case. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Mukesh Sisodiya authored
Add tlv in dump file for dump file name extension. Signed-off-by:
-
Johannes Berg authored
In FW restart scenarios, we allocate the queues from the iwl_mvm_realloc_queues_after_restart() function, but that is called before we insert the station ID into our map (mvm->fw_id_to_mac_id). However, in all cases where we're actually allocating a queue for a "real" (not bcast, aux, ...) station we have the sta pointer already, so just pass it along to use it instead of looking it up. This fixes an issue where after restart we only allocated a queue of size 16 (due to the ordering issue described above), and thus never got good throughput again since no aggregates could be formed on transmit. Signed-off-by:
-
Lukas Bulwahn authored
Commit f79cbc77 ("wifi: move mac80211_hwsim and virt_wifi to virtual directory") and commit 298e50ad ("wifi: move raycs, wl3501 and rndis_wlan to legacy directory") move remaining wireless drivers into subdirectories, but does not adjust the entries in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about broken references. Repair these file references in those wireless driver sections. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230314041848.5120-1-lukas.bulwahn@gmail.com
-
- 13 Mar, 2023 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v6.4. Major changes: ath10k * enable threaded napi on WCN3990 ath11k * push MU-MIMO params from hostapd to hardware * tx ack signal support for management packets
-
Jisoo Jang authored
Fix a slab-out-of-bounds read that occurs in kmemdup() called from brcmf_get_assoc_ies(). The bug could occur when assoc_info->req_len, data from a URB provided by a USB device, is bigger than the size of buffer which is defined as WL_EXTRA_BUF_MAX. Add the size check for req_len/resp_len of assoc_info. Found by a modified version of syzkaller. [ 46.592467][ T7] ================================================================== [ 46.594687][ T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50 [ 46.596572][ T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7 [ 46.598575][ T7] [ 46.599157][ T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #145 [ 46.601333][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 46.604360][ T7] Workqueue: events brcmf_fweh_event_worker [ 46.605943][ T7] Call Trace: [ 46.606584][ T7] dump_stack_lvl+0x8e/0xd1 [ 46.607446][ T7] print_address_description.constprop.0.cold+0x93/0x334 [ 46.608610][ T7] ? kmemdup+0x3e/0x50 [ 46.609341][ T7] kasan_report.cold+0x79/0xd5 [ 46.610151][ T7] ? kmemdup+0x3e/0x50 [ 46.610796][ T7] kasan_check_range+0x14e/0x1b0 [ 46.611691][ T7] memcpy+0x20/0x60 [ 46.612323][ T7] kmemdup+0x3e/0x50 [ 46.612987][ T7] brcmf_get_assoc_ies+0x967/0xf60 [ 46.613904][ T7] ? brcmf_notify_vif_event+0x3d0/0x3d0 [ 46.614831][ T7] ? lock_chain_count+0x20/0x20 [ 46.615683][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.616552][ T7] ? lock_chain_count+0x20/0x20 [ 46.617409][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.618244][ T7] ? lock_chain_count+0x20/0x20 [ 46.619024][ T7] brcmf_bss_connect_done.constprop.0+0x241/0x2e0 [ 46.620019][ T7] ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0 [ 46.620818][ T7] ? __lock_acquire+0x181f/0x5790 [ 46.621462][ T7] brcmf_notify_connect_status+0x448/0x1950 [ 46.622134][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.622736][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.623390][ T7] ? find_held_lock+0x2d/0x110 [ 46.623962][ T7] ? brcmf_fweh_event_worker+0x19f/0xc60 [ 46.624603][ T7] ? mark_held_locks+0x9f/0xe0 [ 46.625145][ T7] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 [ 46.625871][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.626545][ T7] brcmf_fweh_call_event_handler.isra.0+0x90/0x100 [ 46.627338][ T7] brcmf_fweh_event_worker+0x557/0xc60 [ 46.627962][ T7] ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 [ 46.628736][ T7] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 46.629396][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.629970][ T7] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 46.630649][ T7] process_one_work+0x92b/0x1460 [ 46.631205][ T7] ? pwq_dec_nr_in_flight+0x330/0x330 [ 46.631821][ T7] ? rwlock_bug.part.0+0x90/0x90 [ 46.632347][ T7] worker_thread+0x95/0xe00 [ 46.632832][ T7] ? __kthread_parkme+0x115/0x1e0 [ 46.633393][ T7] ? process_one_work+0x1460/0x1460 [ 46.633957][ T7] kthread+0x3a1/0x480 [ 46.634369][ T7] ? set_kthread_struct+0x120/0x120 [ 46.634933][ T7] ret_from_fork+0x1f/0x30 [ 46.635431][ T7] [ 46.635687][ T7] Allocated by task 7: [ 46.636151][ T7] kasan_save_stack+0x1b/0x40 [ 46.636628][ T7] __kasan_kmalloc+0x7c/0x90 [ 46.637108][ T7] kmem_cache_alloc_trace+0x19e/0x330 [ 46.637696][ T7] brcmf_cfg80211_attach+0x4a0/0x4040 [ 46.638275][ T7] brcmf_attach+0x389/0xd40 [ 46.638739][ T7] brcmf_usb_probe+0x12de/0x1690 [ 46.639279][ T7] usb_probe_interface+0x2aa/0x760 [ 46.639820][ T7] really_probe+0x205/0xb70 [ 46.640342][ T7] __driver_probe_device+0x311/0x4b0 [ 46.640876][ T7] driver_probe_device+0x4e/0x150 [ 46.641445][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.642000][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.642543][ T7] __device_attach+0x23f/0x3a0 [ 46.643065][ T7] bus_probe_device+0x1da/0x290 [ 46.643644][ T7] device_add+0xb7b/0x1eb0 [ 46.644130][ T7] usb_set_configuration+0xf59/0x16f0 [ 46.644720][ T7] usb_generic_driver_probe+0x82/0xa0 [ 46.645295][ T7] usb_probe_device+0xbb/0x250 [ 46.645786][ T7] really_probe+0x205/0xb70 [ 46.646258][ T7] __driver_probe_device+0x311/0x4b0 [ 46.646804][ T7] driver_probe_device+0x4e/0x150 [ 46.647387][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.647926][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.648454][ T7] __device_attach+0x23f/0x3a0 [ 46.648939][ T7] bus_probe_device+0x1da/0x290 [ 46.649478][ T7] device_add+0xb7b/0x1eb0 [ 46.649936][ T7] usb_new_device.cold+0x49c/0x1029 [ 46.650526][ T7] hub_event+0x1c98/0x3950 [ 46.650975][ T7] process_one_work+0x92b/0x1460 [ 46.651535][ T7] worker_thread+0x95/0xe00 [ 46.651991][ T7] kthread+0x3a1/0x480 [ 46.652413][ T7] ret_from_fork+0x1f/0x30 [ 46.652885][ T7] [ 46.653131][ T7] The buggy address belongs to the object at ffff888019442000 [ 46.653131][ T7] which belongs to the cache kmalloc-2k of size 2048 [ 46.654669][ T7] The buggy address is located 0 bytes inside of [ 46.654669][ T7] 2048-byte region [ffff888019442000, ffff888019442800) [ 46.656137][ T7] The buggy address belongs to the page: [ 46.656720][ T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440 [ 46.657792][ T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0 [ 46.658673][ T7] flags: 0x100000000010200(slab|head|node=0|zone=1) [ 46.659422][ T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000 [ 46.660363][ T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 46.661236][ T7] page dumped because: kasan: bad access detected [ 46.661956][ T7] page_owner tracks the page as allocated [ 46.662588][ T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0 [ 46.664271][ T7] prep_new_page+0x1aa/0x240 [ 46.664763][ T7] get_page_from_freelist+0x159a/0x27c0 [ 46.665340][ T7] __alloc_pages+0x2da/0x6a0 [ 46.665847][ T7] alloc_pages+0xec/0x1e0 [ 46.666308][ T7] allocate_slab+0x380/0x4e0 [ 46.666770][ T7] ___slab_alloc+0x5bc/0x940 [ 46.667264][ T7] __slab_alloc+0x6d/0x80 [ 46.667712][ T7] kmem_cache_alloc_trace+0x30a/0x330 [ 46.668299][ T7] brcmf_usbdev_qinit.constprop.0+0x50/0x470 [ 46.668885][ T7] brcmf_usb_probe+0xc97/0x1690 [ 46.669438][ T7] usb_probe_interface+0x2aa/0x760 [ 46.669988][ T7] really_probe+0x205/0xb70 [ 46.670487][ T7] __driver_probe_device+0x311/0x4b0 [ 46.671031][ T7] driver_probe_device+0x4e/0x150 [ 46.671604][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.672192][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.672739][ T7] page_owner free stack trace missing [ 46.673335][ T7] [ 46.673620][ T7] Memory state around the buggy address: [ 46.674213][ T7] ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 46.675083][ T7] ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 46.675994][ T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.676875][ T7] ^ [ 46.677323][ T7] ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.678190][ T7] ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.679052][ T7] ================================================================== [ 46.679945][ T7] Disabling lock debugging due to kernel taint [ 46.680725][ T7] Kernel panic - not syncing: Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by:
-
Dongliang Mu authored
drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe() warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811 Fix this by modifying return to a goto statement. Signed-off-by:
Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
To support v5 version firmware cycle report, apply the related structure and functions. v5 cycle report add a group of status to show how the free-run/TDMA training goes to. It is a firmware mechanism that can auto adjust coexistence mode between TDMA and free run mechanism at 3 antenna solution. v5 version provide more reference data to let the mechanism make decision. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
Compare to v1 and v2 removed some not usable parameters. Save firmware code size. The information can show how frequent and how long the Bluetooth scan do. It will help to debug coexistence issue. Signed-off-by:
-
Ching-Te Ku authored
Correct pointer assignment of v1 null data report. It doesn't really change logic at all, but it looks more readable. Signed-off-by:
-
Ching-Te Ku authored
The v2 firmware report reduce its maximum register numbers from 30 to 20, it can help to save firmware code size. Signed-off-by:
-
Ching-Te Ku authored
There is a new mechanism which can do some real time performance tuning for WiFi and BT. This TX/RX info is a condition provide to firmware to do traffic analysis. Signed-off-by:
-
Ching-Te Ku authored
Remove WiFi traffic busy level & traffic rate from active role information. This information will move to v5 version TDMA cycle info. Signed-off-by:
-
Ching-Te Ku authored
The error map and counter can help to analyze is coexistence mechanism going well or not. For example, if there is E2G (External control Wi-Fi slot for Wi-Fi 2.4 GHz) hang counter, it means Wi-Fi firmware didn't cut a slot for Wi-Fi 2.4 GHz. Maybe something wrong with firmware timer. Signed-off-by:
-
Jacob Keller authored
Replace the calculations for the payload length in qtnf_cmd_band_fill_iftype with struct_size() and size_sub(). While the payload length does not get directly passed to an allocation function, the performed calculation is still calculating the size of a flexible array structure (minus the size of a header structure). Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Cc: Igor Mitsyanko <imitsyanko@quantenna.com> Cc: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by:
-
Jacob Keller authored
The ipw_fw_error structure contains a payload[] flexible array as well as two pointers to this array area, ->elem, and ->log. The total size of the allocated structure is computed without use of the <linux/overflow.h> macros. There's no reason to keep both a payload[] and an extra pointer to both the elem and log members. Convert the elem pointer member into the flexible array member, removing payload. Fix the allocation of the ipw_fw_error structure to use size_add(), struct_size(), and array_size() to compute the allocation. This ensures that any overflow saturates at SIZE_MAX rather than overflowing and potentially allowing an undersized allocation. Before the structure change, the layout of ipw_fw_error was: struct ipw_fw_error { long unsigned int jiffies; /* 0 8 */ u32 status; /* 8 4 */ u32 config; /* 12 4 */ u32 elem_len; /* 16 4 */ u32 log_len; /* 20 4 */ struct ipw_error_elem * elem; /* 24 8 */ struct ipw_event * log; /* 32 8 */ u8 payload[]; /* 40 0 */ /* size: 40, cachelines: 1, members: 8 */ /* last cacheline: 40 bytes */ }; After this change, the layout is now: struct ipw_fw_error { long unsigned int jiffies; /* 0 8 */ u32 status; /* 8 4 */ u32 config; /* 12 4 */ u32 elem_len; /* 16 4 */ u32 log_len; /* 20 4 */ struct ipw_event * log; /* 24 8 */ struct ipw_error_elem elem[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 7 */ /* last cacheline: 32 bytes */ }; This saves a total of 8 bytes for every ipw_fw_error allocation, and removes the risk of a potential overflow on the allocation. Signed-off-by: -
Martin Kaiser authored
We can use the module_usb_driver macro instead of open-coding the driver's init and exit functions. This is simpler and saves some lines of code. Other realtek wireless drivers use module_usb_driver as well. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
-
Ping-Ke Shih authored
Originally, we keep RX standby timer to handle beamformee CSI, but this spends power and causes system not entering power save mode. To improve power consumption, release the timer if throughput becomes low. Signed-off-by:
-
Martin Kaiser authored
The Edimax V2 (vid 0x7392, pid 0xb811) works well with the rtl8xxxu driver since rtl8188eu support has been added. Remove the untested flag for this device. Signed-off-by:
-
Hans de Goede authored
Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are all special world-wide compatibility ccode-s. Most of these world-wide ccode-s allow passive scan mode only for 2.4GHz channels 12-14, only enabling them when an AP is seen on them. Since linux-firmware has moved to the new cyfmac4356-pci.bin + cyfmac4356-pci.clm_blob firmware files this no longer works and 4356 devices using e.g. an X2 ccode fail to connect to an AP on channel 13. Add the 4356 chip-id to the list of chips for which to use the ISO3166 country code + rev 0 as fallback in brcmf_translate_country_code() to fix this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Kalle Valo authored
To clean up drivers/net/wireless move the old drivers drivers left in the directory to a new "legacy" directory. I did consider adding CONFIG_WLAN_VENDOR_LEGACY like other vendors have but then dropped the idea as these are really old drivers and hopefully we get to remove them soon. There should be no changes in compilation or in Kconfig options, merely moving files. Signed-off-by:
-
Kalle Valo authored
To clean up drivers/net/wireless move the virtual drivers to a new virtual directory. I did consider adding CONFIG_WLAN_VENDOR_VIRTUAL like other vendors have but then dropped the idea as we are not real drivers. There should be no changes in compilation or in Kconfig options, merely moving files. The order in menuconfig is slightly changed, the virtual drivers are now last in the list. Signed-off-by:
-
Aditya Kumar Singh authored
Add some more debug prints in processing regulatory WMI event in order to increase more debuggability. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230110121024.14051-4-quic_adisi@quicinc.com
-
Aditya Kumar Singh authored
In order to support different power levels of 6 GHz AP and client, new WMI event for regulatory - WMI_REG_CHAN_LIST_CC_EXT_EVENTID is added in firmware. This event provides new parameters required for 6 GHz regulatory rules. Add support for parsing 2.4 GHz, 5 GHz and 6 GHz reg rules and other parameters from WMI_REG_CHAN_LIST_CC_EXT_EVENTID. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Lavanya Suresh <quic_lavaks@quicinc.com> Signed-off-by:
Wen Gong <quic_wgong@quicinc.com> Signed-off-by:
-
Aditya Kumar Singh authored
Currently, during regulatory event, 2 GHz/5 GHz is referred to as 2G/5G including variable names. However, there is no such entity as 2G or 5G. Re-name such occurences to its proper name. No functional changes. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 11 Mar, 2023 3 commits
-
-
Muhammad Usama Anjum authored
make versioncheck reports the following: ./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed. ./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed. So remove linux/version.h from both of these files. Also remove linux/compiler.h while at it as it is also not being used. Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309225206.2473644-1-usama.anjum@collabora.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Edward Cree authored
EF100 can pop and/or push up to two VLAN tags. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Siddharth Vadapalli says: ==================== Update CPSW bindings for Serdes PHY This series adds documentation for the Serdes PHY. Also, the name used to refer to the Serdes PHY in the am65-cpsw driver is updated to match the documented name. Documenting the Serdes PHY bindings was missed out in the already merged series at: https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ This miss was pointed out at: https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ v2: https://lore.kernel.org/r/20230308051835.276552-1-s-vadapalli@ti.com/ v1: https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ ==================== Link: https://lore.kernel.org/r/20230309073612.431287-1-s-vadapalli@ti.comSigned-off-by:
-
