The Spreadtrum eFuse controller is widely used to dump chip ID,
configuration setting, function select and so on, as well as
supporting one-time programming.
Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-8-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the binding documentation for Spreadtrum eFuse controller.
Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-7-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If software running before the OCOTP driver is loaded left the
controller with the error status pending, the driver will never
be able to complete the read timing setup. Reset the error status
on probe to make sure the controller is in usable state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-6-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The fuse programming from non-secure world is blocked, so we could
only use Arm Trusted Firmware SIP call to let ATF program fuse.

Because there is ECC region that could only be programmed once,
so add a heler in_ecc to check the ecc region.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-5-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce HOLE/ECC_REGION flag and in_hole helper to ease the check
of hole region. The ECC_REGION is also introduced here which is
preparing for programming support. ECC_REGION could only be programmed
once, so need take care.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-4-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change to use devm_hwspin_lock_request_specific() to help to simplify the
cleanup code for drivers requesting one hwlock. Thus we can remove the
redundant sc27xx_efuse_remove() and platform_set_drvdata().
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-3-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem_cell_write's buf argument uses different types based on
the configuration of CONFIG_NVMEM. The function prototype for
enabled NVMEM uses 'void *' type, but the static dummy function
for disabled NVMEM uses 'const char *' instead. Fix the different
behaviour by always expecting a 'void *' typed buf argument.

Fixes: 7a78a7f7 ("power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Han Nandor <nandor.han@vaisala.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-By: Han Nandor <nandor.han@vaisala.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20191016092546.26332-1-yuehaibing@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udev has a feature of creating /dev/<node> device-nodes if it finds
a devnode:<node> modalias. This allows for auto-loading of modules that
provide the node. This requires to use a statically allocated minor
number for misc character devices.

However, rfkill uses dynamic minor numbers and prevents auto-loading
of the module. So allocate the next static misc minor number and use
it for rfkill.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comet Point (Comet Lake) V device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191105150514.14010-2-tomas.winkler@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add parent device name to the name of devices on bus to avoid
device names collisions for same client UUID available
from different MEI heads. Namely this prevents sysfs collision under
/sys/bus/mei/device/

In the device part leave just UUID other parameters that are
required for device matching are not required here and are
just bloating the name.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191105150514.14010-1-tomas.winkler@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'extcon-next-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 5.5

Detailed description for this pull request:
1. Clean up the and fix the minor issue of extcon provider driver
- extcon-intel-cht-wc don't reset the USB data connection at probe time
  in order to prevent the removing all devices from bus.
- extcon-sm5502 reset the registers at proble time in order to
  prevent the some stuck state. And remove the redundant variable initializaiton.

* tag 'extcon-next-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: sm5502: remove redundant assignment to variable cable_type
  extcon: sm5502: Reset registers during initialization
  extcon-intel-cht-wc: Don't reset USB data connection at probe

The second argument should be the lsb and the third argument should be
the msb.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-15-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When tracing etm data of multiple threads on multiple cpus through perf
interface, some link devices are shared between paths of different cpus.
It creates race conditions when different cpus wants to enable/disable
the same link device at the same time.

Example 1:
Two cpus want to enable different ports of a coresight funnel, thus
calling the funnel enable operation at the same time. But the funnel
enable operation isn't reentrantable.

Example 2:
For an enabled coresight dynamic replicator with refcnt=1, one cpu wants
to disable it, while another cpu wants to enable it. Ideally we still have
an enabled replicator with refcnt=1 at the end. But in reality the result
is uncertain.

Since coresight devices claim themselves when enabled for self-hosted
usage, the race conditions above usually make the link devices not usable
after many cycles.

To fix the race conditions, this patch uses spinlocks to serialize
enabling/disabling link devices.

Fixes: a06ae860 ("coresight: add CoreSight core layer framework")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org> # 5.3
Link: https://lore.kernel.org/r/20191104181251.26732-14-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Coresight hardware is only likely to appear on Arm systems and currently
the core code has Arm-specific barrier operations in it so can't be
built anywhere else so add an explicit dependency saying so.  This will
make no practical difference currently due to the way subsystems are
referenced, the subsystem is only pulled in on arm and arm64, so mainly
serves as documentation in case someone wants to increase build
coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-13-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An API to control single-shot comparator operation was missing from sysfs.
This adds the parameters to sysfs to allow programming of this feature.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-12-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently it is not possible to view the current settings of a given
address comparator without knowing what type it is set to. For example, if
a comparator is set as an addr_start comparator, attempting to read
addr_stop for the same index will result in an error.

addr_cmp_view is added to allow the user to see the current settings of
the indexed address comparator without resorting to trial and error when
the set type is not known.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-11-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Context ID and VM ID masks required 2 value inputs, even when the
second value is ignored as insufficient CID / VMID comparators are
implemented.

Permit a single value to be used if that is sufficient to cover all
implemented comparators.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-10-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Setting include / exclude on a range had to be done by setting
the bit in 'mode' before setting the range. However, setting this
bit also had the effect of altering the current range as well.

Changed to only set include / exclude setting of a range at the point of
setting that range. Either use a 3rd input parameter as the include exclude
value, or if not present use the current value of 'mode'. Do not change
current range when 'mode' changes.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-9-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following issues when using the ETMv4 start-stop logic.

1) Setting a start or a stop address should not automatically set the
start-stop status to 'on'. The value set by the user in 'mode' must
be respected or start instances could be missed.
2) Missing API for controlling TRCVIPCSSCTLR - start stop control by
PE comparators.
3) Default ETM configuration sets a trace all range, and correctly sets
the start-stop status bit. This was not being correctly reflected in
the 'mode' parameter.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-8-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TRCACATRn registers have match bits for secure and non-secure exception
levels which are not accessible by the sysfs API.
This adds a new sysfs parameter to enable this - addr_exlevel_s_ns.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-7-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A number of issues are fixed relating to sysfs input validation:-

1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: a77de263 ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ETMv4.4 adds in support for tracing secure EL2 (per arch 8.x updates).
Patch accounts for this new capability.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-5-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add ETMv4 periperhal ID for Marvell's ThunderX2 chip.
This chip contains ETMv4.1 version.
Signed-off-by: Tanmay Vilas Kumar Jagdale <tanmay@marvell.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-4-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some coresight components, because of choices made during hardware
integration, require their state to be saved and restored across CPU low
power states.

The software has no reliable method of detecting when save/restore is
required thus let's add a binding to inform the kernel.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-3-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some hardware will ignore bit TRCPDCR.PU which is used to signal
to hardware that power should not be removed from the trace unit.
Let's mitigate against this by conditionally saving and restoring
the trace unit state when the CPU enters low power states.

This patchset introduces a firmware property named
'arm,coresight-loses-context-with-cpu' - when this is present the
hardware state will be conditionally saved and restored.

A module parameter 'pm_save_enable' is also introduced which can
be configured to override the firmware property. This can be set
to never allow save/restore or to conditionally allow it (only for
self-hosted). The default value is determined by firmware.

We avoid saving the hardware state when self-hosted coresight isn't
in use to reduce PM latency - we can't determine this by reading the
claim tags (TRCCLAIMCLR) as these are 'trace' registers which need
power and clocking, something we can't easily provide in the PM
context. Therefore we rely on the existing drvdata->mode internal
state that is set when self-hosted coresight is used (and powered).
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-2-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that we have symbol namespaces, use them in MCB to not pollute the
default namespace with MCB internals.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Michael Moese <mmoese@suse.de>
Link: https://lore.kernel.org/r/20191016100158.1400-1-jthumshirn@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable cable_type is being initialized with a value that
is never read and is being re-assigned a little later on. The
assignment is redundant and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

We want the binder fix in here as well for testing and to work on top
of.

Also handles a merge issue in binder.c to help linux-next out
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the VMWare guest support:

   - Unbreak VMWare platform detection which got wreckaged by converting
     an integer constant to a string constant.

   - Fix the clang build of the VMWAre hypercall by explicitely
     specifying the ouput register for INL instead of using the short
     form"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
  x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes for time(keeping):

   - Add a missing include to prevent compiler warnings.

   - Make the VDSO implementation of clock_getres() POSIX compliant
     again. A recent change dropped the NULL pointer guard which is
     required as NULL is a valid pointer value for this function.

   - Fix two function documentation typos"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Fix two trivial comments
  timers/sched_clock: Include local timekeeping.h for missing declarations
  lib/vdso: Make clock_getres() POSIX compliant again

Pull perf fixes from Thomas Gleixner:
 "A set of perf fixes:

  kernel:

   - Unbreak the tracking of auxiliary buffer allocations which got
     imbalanced causing recource limit failures.

   - Fix the fallout of splitting of ToPA entries which missed to shift
     the base entry PA correctly.

   - Use the correct context to lookup the AUX event when unmapping the
     associated AUX buffer so the event can be stopped and the buffer
     reference dropped.

  tools:

   - Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
     /proc/kcore

   - Fix freeing id arrays in the event list so the correct event is
     closed.

   - Sync sched.h anc kvm.h headers with the kernel sources.

   - Link jvmti against tools/lib/ctype.o to have weak strlcpy().

   - Fix multiple memory and file descriptor leaks, found by coverity in
     perf annotate.

   - Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
     by a static analysis tool"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/aux: Fix AUX output stopping
  perf/aux: Fix tracking of auxiliary trace buffer allocation
  perf/x86/intel/pt: Fix base for single entry topa
  perf kmem: Fix memory leak in compact_gfp_flags()
  tools headers UAPI: Sync sched.h with the kernel
  tools headers kvm: Sync kvm.h headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  perf c2c: Fix memory leak in build_cl_output()
  perf tools: Fix mode setting in copyfile_mode_ns()
  perf annotate: Fix multiple memory and file descriptor leaks
  perf tools: Fix resource leak of closedir() on the error paths
  perf evlist: Fix fix for freed id arrays
  perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()

Pull irq fixes from Thomas Gleixner:
 "Two fixes for interrupt controller drivers:

   - Skip IRQ_M_EXT entries in the device tree when initializing the
     RISCV PLIC controller to avoid a double init attempt.

   - Use the correct ITS list when issuing the VMOVP synchronization
     command so the operation works only on the ITS instances which are
     associated to a VM"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Skip contexts except supervisor in plic_init()
  irqchip/gic-v3-its: Use the exact ITSList for VMOVP

Pull cifs fixes from Steve French:
 "Seven cifs/smb3 fixes, including three for stable"

* tag '5.4-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs
  CIFS: Fix use after free of file info structures
  CIFS: Fix retry mid list corruption on reconnects
  cifs: Fix missed free operations
  CIFS: avoid using MID 0xFFFF
  cifs: clarify comment about timestamp granularity for old servers
  cifs: Handle -EINPROGRESS only when noblockcnt is set

Pull RISC-V fixes from Paul Walmsley:
 "Several minor fixes and cleanups for v5.4-rc5:

   - Three build fixes for various SPARSEMEM-related kernel
     configurations

   - Two cleanup patches for the kernel bug and breakpoint trap handler
     code"

* tag 'riscv/for-v5.4-rc5-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: cleanup do_trap_break
  riscv: cleanup <asm/bug.h>
  riscv: Fix undefined reference to vmemmap_populate_basepages
  riscv: Fix implicit declaration of 'page_to_section'
  riscv: fix fs/proc/kcore.c compilation with sparsemem enabled

Pull MIPS fixes from Paul Burton:
 "A few MIPS fixes:

   - Fix VDSO time-related function behavior for systems where we need
     to fall back to syscalls, but were instead returning bogus results.

   - A fix to TLB exception handlers for Cavium Octeon systems where
     they would inadvertently clobber the $1/$at register.

   - A build fix for bcm63xx configurations.

   - Switch to using my @kernel.org email address"

* tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: tlbex: Fix build_restore_pagemask KScratch restore
  MIPS: bmips: mark exception vectors as char arrays
  mips: vdso: Fix __arch_get_hw_counter()
  MAINTAINERS: Use @kernel.org address for Paul Burton

Pull tty/serial driver fix from Greg KH:
 "Here is a single tty/serial driver fix for 5.4-rc5 that resolves a
  reported issue.

  It has been in linux-next for a while with no problems"

* tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  8250-men-mcb: fix error checking when get_num_ports returns -ENODEV

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix, for the wlan-ng driver, that
  resolves a reported issue.

  It is been in linux-next for a while with no reported issues"

* tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS

Pull driver core fix from Greg KH:
 "Here is a single sysfs fix for 5.4-rc5.

  It resolves an error if you actually try to use the __BIN_ATTR_WO()
  macro, seems I never tested it properly before :(

  This has been in linux-next for a while with no reported issues"

* tag 'driver-core-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: Fixes __BIN_ATTR_WO() macro