- 06 Sep, 2011 36 commits
-
-
Aaro Koskinen authored
Delete another useless flag. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Aaro Koskinen authored
Delete already disabled code paths. Signed-off-by:
-
Aaro Koskinen authored
Delete redundant timing data tables. Replace as follows: EnlargeTap4Timing ==> xgifb_tap4_timing NoScaleTap4Timing ==> xgifb_tap4_timing NTSCTap4Timing ==> xgifb_ntsc_525_tap4_timing YPbPr525iTap4Timing ==> xgifb_ntsc_525_tap4_timing YPbPr525pTap4Timing ==> xgifb_ntsc_525_tap4_timing Signed-off-by:
-
Aaro Koskinen authored
Delete redundant TV data tables. Replace as follows: XGI_EPLCHTVDataPtr ==> xgifb_chrontel_tv XGI_EPLCHTVRegPtr ==> xgifb_chrontel_tv Signed-off-by:
-
Aaro Koskinen authored
XGI_EPLLCDCRT1Ptr_H and XGI_EPLLCDCRT1Ptr_V tables are identical. Replace as follows: XGI_EPLLCDCRT1Ptr_H ==> xgifb_epllcd_crt1 XGI_EPLLCDCRT1Ptr_V ==> xgifb_epllcd_crt1 Signed-off-by:
-
Aaro Koskinen authored
Delete duplicated LCD data tables. Replace as follows: XGI_ExtLCD1400x1050Data ==> xgifb_lcd_1400x1050 XGI_StLCD1400x1050Data ==> xgifb_lcd_1400x1050 XGI_ExtLCD1280x1024x75Data ==> xgifb_lcd_1280x1024x75 XGI_StLCD1280x1024x75Data ==> xgifb_lcd_1280x1024x75 XGI_ExtLCDDes1400x1050Data ==> xgifb_lcddes_1400x1050 XGI_StLCDDes1400x1050Data ==> xgifb_lcddes_1400x1050 XGI_ExtLCDDLDes1400x1050Data ==> xgifb_lcddldes_1400x1050 XGI_StLCDDLDes1400x1050Data ==> xgifb_lcddldes_1400x1050 XGI_ExtLCDDes1024x768x75Data ==> xgifb_lcddes_1024x768x75 XGI_StLCDDes1024x768x75Data ==> xgifb_lcddes_1024x768x75 XGI_ExtLCDDes1280x1024x75Data ==> xgifb_lcddes_1280x1024x75 XGI_StLCDDes1280x1024x75Data ==> xgifb_lcddes_1280x1024x75 XGI_ExtLCDDLDes1280x1024x75Data ==> xgifb_lcddldes_1280x1024x75 XGI_StLCDDLDes1280x1024x75Data ==> xgifb_lcddldes_1280x1024x75 Signed-off-by:
-
Aaro Koskinen authored
PAL-M and PAL-N "YFilter1" tables are identical. Replace as follows: PALMYFilter1 ==> xgifb_palmn_yfilter1 PALNYFilter1 ==> xgifb_palmn_yfilter1 Signed-off-by:
-
Aaro Koskinen authored
All four "YFilter2" tables are identical. Replace as follows: NTSCYFilter2 ==> xgifb_yfilter2; PALMYFilter2 ==> xgifb_yfilter2; PALNYFilter2 ==> xgifb_yfilter2; PALYFilter2 ==> xgifb_yfilter2; Signed-off-by:
-
Aaro Koskinen authored
Remove redundant initializations. Signed-off-by:
-
Aaro Koskinen authored
Eliminate #define Tap4 and related checks. Signed-off-by:
-
Aaro Koskinen authored
Delete routines which have been commented out. Signed-off-by:
-
Aaro Koskinen authored
The code is almost the same for XG21 and XG27, a single routine can cover both. Signed-off-by:
-
Aaro Koskinen authored
The code is almost the same for XG21 and XG27, a single routine can cover both. Signed-off-by:
-
Aaro Koskinen authored
Delete redundant Chrontel TV data. Signed-off-by:
-
Aaro Koskinen authored
IF_DEF_CH7007 is hard-coded to 0, so this is all just dead code that can be deleted. Signed-off-by:
-
Aaro Koskinen authored
IF_DEF_CH7005 is hard-coded to 0, so this is all just dead code that can be deleted. Signed-off-by:
-
Aaro Koskinen authored
IF_DEF_CH7017 is hard-coded to 0, so this is all just dead code that can be deleted. Signed-off-by:
-
Aaro Koskinen authored
Delete redundant function. Also eliminates the following sparse warning: drivers/staging/xgifb/vb_setmode.c:8033:6: warning: symbol 'XGI_OpenCRTC' was not declared. Should it be static? Signed-off-by:
-
Aaro Koskinen authored
Use a common init function for module and built-in driver. Signed-off-by:
-
Aaro Koskinen authored
Remove incorrect/misleading text from parameter descriptions. Signed-off-by:
-
Aaro Koskinen authored
Delete all references to mode "none". It should be handled like any other invalid mode. Signed-off-by:
-
Aaro Koskinen authored
According to the comment, the default mode should be 800x600x8 while the index points actually to 800x600x16. Change the comment and move the definition instead of changing the current behaviour. Signed-off-by:
-
Aaro Koskinen authored
The default mode is the same regardless of the display type, except for XG21/LCD which is determined dynamically. Signed-off-by:
-
Aaro Koskinen authored
Fail the probe if the LCD resolution described in card firmware does not match any of the supported modes. Signed-off-by:
-
Aaro Koskinen authored
The code for determining the default video mode is unnecessarily duplicated in XGIfb_search_mode() and XGIfb_search_vesamode() functions. Signed-off-by:
-
Aaro Koskinen authored
The same default video mode should be assumed regardless if the driver is a module or not. This won't change the current behaviour, but it will simplify further changes. Signed-off-by:
-
Aaro Koskinen authored
XGIfb_search_mode() is always called with a valid string pointer. Signed-off-by:
-
Aaro Koskinen authored
When searching the video mode, some HW details needs to be known. Therefore it's not possible to do that reliably before probe(). Signed-off-by:
-
Aaro Koskinen authored
If the driver fails to get LVDS LCD data from the firmware, it falls back to using driver's hardcoded values. However, this is done too early in the probe. The selected video mode index is not yet known, and also in some cases it could be defaulting to -1 resulting in a read outside the array. Fix this by moving the array lookup after the video mode validation. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Aaro Koskinen authored
Check option values with kstrtoul(). This will also eliminate some checkpatch warnings about simple_strtoul() usage. Signed-off-by:
-
Aaro Koskinen authored
The global data is already initialized to zero. Signed-off-by:
-
Aaro Koskinen authored
Print options only if they are given. Delete other messages. Signed-off-by:
-
Aaro Koskinen authored
It's possible to disable the built-in xgifb driver with the kernel command line option: video=xgifb:off This is already handled by the generic framebuffer layer (fb_get_options() will return TRUE resulting in init failure), so no need to process the option in the driver. Signed-off-by:
-
Aaro Koskinen authored
Delete redundant branches for "mode" and "vesa" options. Signed-off-by:
-
Aaro Koskinen authored
Setting any of the FB options will disable ypan as a side effect. It should be disabled only by the "noypan" option. Signed-off-by:
-
Aaro Koskinen authored
Delete parameters which have no effect. Signed-off-by:
-
- 29 Aug, 2011 4 commits
-
-
Bill Pemberton authored
The serqt_usb2 driver will not work properly with the ssu100 device even though it claims to support it. The ssu100 is supported by the ssu100 driver in mainline so there is no need to have it claimed by serqt_usb2. Signed-off-by:
Bill Pemberton <wfp5p@virginia.edu> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alexey Khoroshilov authored
In case if condition (kd != isdongle(peasycap)) becomes true, easycap_poll() returns without releasing easycapdc60_dongle[kd].mutex_video. The patch adds mutex_unlock() before that return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Mark Einon authored
Adding some basic ethtool ops and supporting functionality using a phy device. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
Manual setting of speed/duplex will be achieved using ethtool. Remove the driver specific module_param that also does this. Signed-off-by:
-
