- 25 Jan, 2024 21 commits
-
-
Paolo Abeni authored
Gerhard Engleder says: ==================== tsnep: XDP fixes Found two driver specific problems during XDP and XSK testing. ==================== Link: https://lore.kernel.org/r/20240123200918.61219-1-gerhard@engleder-embedded.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Gerhard Engleder authored
The fill ring of the XDP socket may contain not enough buffers to completey fill the RX queue during socket creation. In this case the flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX queue is not completely filled during polling. Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled during XDP socket creation. Fixes: 3fc23339 ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by:
-
Gerhard Engleder authored
The RX data buffer includes the FCS. The FCS is already stripped for the normal data path. But for the XDP data path the FCS is included and acts like additional/useless data. Remove the FCS from the RX data buffer also for XDP. Fixes: 65b28c81 ("tsnep: Add XDP RX support") Fixes: 3fc23339 ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxPaolo Abeni authored
Saeed Mahameed says: ==================== mlx5 fixes 2024-01-24 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: fix a potential double-free in fs_any_create_groups net/mlx5e: fix a double-free in arfs_create_groups net/mlx5e: Ignore IPsec replay window values on sender side net/mlx5e: Allow software parsing when IPsec crypto is enabled net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO net/mlx5: DR, Can't go to uplink vport on RX rule net/mlx5: DR, Use the right GVMI number for drop action net/mlx5: Bridge, fix multicast packets sent to uplink net/mlx5: Fix a WARN upon a callback command failure net/mlx5e: Fix peer flow lists handling net/mlx5e: Fix inconsistent hairpin RQT sizes net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context net/mlx5: Fix query of sd_group field net/mlx5e: Use the correct lag ports number when creating TISes ==================== Link: https://lore.kernel.org/r/20240124081855.115410-1-saeed@kernel.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-01-25 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 2 day(s) which contain a total of 13 files changed, 190 insertions(+), 91 deletions(-). The main changes are: 1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which support XDP multi-buffer. The former triggered a NULL pointer dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar. 2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and epilogue for struct_ops programs, from Pu Lehui. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops ==================== Link: https://lore.kernel.org/r/20240125084416.10876-1-daniel@iogearbox.netSigned-off-by:
-
Shenwei Wang authored
When repeatedly changing the interface link speed using the command below: ethtool -s eth0 speed 100 duplex full ethtool -s eth0 speed 1000 duplex full The following errors may sometimes be reported by the ARM SMMU driver: [ 5395.035364] fec 5b040000.ethernet eth0: Link is Down [ 5395.039255] arm-smmu 51400000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2 [ 5398.108460] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off It is identified that the FEC driver does not properly stop the TX queue during the link speed transitions, and this results in the invalid virtual I/O address translations from the SMMU and causes the context faults. Fixes: dbc64a8e ("net: fec: move calls to quiesce/resume packet processing out of fec_restart()") Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20240123165141.2008104-1-shenwei.wang@nxp.comSigned-off-by:
-
Hangbin Liu authored
The prio_arp/ns tests hard code the mode to active-backup. At the same time, The balance-alb/tlb modes do not support arp/ns target. So remove the prio_arp/ns tests from the loop and only test active-backup mode. Fixes: 481b56e0 ("selftests: bonding: re-format bond option tests") Reported-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Update nf_tables kdoc to keep it in sync with the code, from George Guo. 2) Handle NETDEV_UNREGISTER event for inet/ingress basechain. 3) Reject configuration that cause nft_limit to overflow, from Florian Westphal. 4) Restrict anonymous set/map names to 16 bytes, from Florian Westphal. 5) Disallow to encode queue number and error in verdicts. This reverts a patch which seems to have introduced an early attempt to support for nfqueue maps, which is these days supported via nft_queue expression. 6) Sanitize family via .validate for expressions that explicitly refer to NF_INET_* hooks. * tag 'nf-24-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: validate NFPROTO_* family netfilter: nf_tables: reject QUEUE/DROP verdict parameters netfilter: nf_tables: restrict anonymous set and map names to 16 bytes netfilter: nft_limit: reject configurations that cause integer overflow netfilter: nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain netfilter: nf_tables: cleanup documentation ==================== Link: https://lore.kernel.org/r/20240124191248.75463-1-pablo@netfilter.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Zhipeng Lu authored
In fjes_hw_setup, it allocates several memory and delay the deallocation to the fjes_hw_exit in fjes_probe through the following call chain: fjes_probe |-> fjes_hw_init |-> fjes_hw_setup |-> fjes_hw_exit However, when fjes_hw_setup fails, fjes_hw_exit won't be called and thus all the resources allocated in fjes_hw_setup will be leaked. In this patch, we free those resources in fjes_hw_setup and prevents such leaks. Fixes: 2fcbca68 ("fjes: platform_driver's .probe and .remove routine") Signed-off-by:Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240122172445.3841883-1-alexious@zju.edu.cnSigned-off-by:
-
Alexei Starovoitov authored
Maciej Fijalkowski says: ==================== net: bpf_xdp_adjust_tail() and Intel mbuf fixes Hey, after a break followed by dealing with sickness, here is a v6 that makes bpf_xdp_adjust_tail() actually usable for ZC drivers that support XDP multi-buffer. Since v4 I tried also using bpf_xdp_adjust_tail() with positive offset which exposed yet another issues, which can be observed by increased commit count when compared to v3. John, in the end I think we should remove handling MEM_TYPE_XSK_BUFF_POOL from __xdp_return(), but it is out of the scope for fixes set, IMHO. Thanks, Maciej v6: - add acks [Magnus] - fix spelling mistakes [Magnus] - avoid touching xdp_buff in xp_alloc_{reused,new_from_fq}() [Magnus] - s/shrink_data/bpf_xdp_shrink_data [Jakub] - remove __shrink_data() [Jakub] - check retvals from __xdp_rxq_info_reg() [Magnus] v5: - pick correct version of patch 5 [Simon] - elaborate a bit more on what patch 2 fixes v4: - do not clear frags flag when deleting tail; xsk_buff_pool now does that - skip some NULL tests for xsk_buff_get_tail [Martin, John] - address problems around registering xdp_rxq_info - fix bpf_xdp_frags_increase_tail() for ZC mbuf v3: - add acks - s/xsk_buff_tail_del/xsk_buff_del_tail - address i40e as well (thanks Tirthendu) v2: - fix !CONFIG_XDP_SOCKETS builds - add reviewed-by tag to patch 3 ==================== Link: https://lore.kernel.org/r/20240124191602.566724-1-maciej.fijalkowski@intel.comSigned-off-by:Alexei Starovoitov <ast@kernel.org>
-
Maciej Fijalkowski authored
Now that i40e driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. i40e_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Fixes: 1c9ba9c1 ("i40e: xsk: add RX multi-buffer support") Acked-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-12-maciej.fijalkowski@intel.comSigned-off-by:
-
Maciej Fijalkowski authored
i40e support XDP multi-buffer so it is supposed to use __xdp_rxq_info_reg() instead of xdp_rxq_info_reg() and set the frag_size. It can not be simply converted at existing callsite because rx_buf_len could be un-initialized, so let us register xdp_rxq_info within i40e_configure_rx_ring(), which happen to be called with already initialized rx_buf_len value. Commit 5180ff13 ("i40e: use int for i40e_status") converted 'err' to int, so two variables to deal with return codes are not needed within i40e_configure_rx_ring(). Remove 'ret' and use 'err' to handle status from xdp_rxq_info registration. Fixes: e213ced1 ("i40e: add support for XDP multi-buffer Rx") Signed-off-by:
-
Maciej Fijalkowski authored
XSK ZC Rx path calculates the size of data that will be posted to XSK Rx queue via subtracting xdp_buff::data_end from xdp_buff::data. In bpf_xdp_frags_increase_tail(), when underlying memory type of xdp_rxq_info is MEM_TYPE_XSK_BUFF_POOL, add offset to data_end in tail fragment, so that later on user space will be able to take into account the amount of bytes added by XDP program. Fixes: 24ea5012 ("xsk: support mbuf on ZC RX") Signed-off-by:
-
Maciej Fijalkowski authored
Now that ice driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. ice_rx_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Use a bigger hammer and instead of unregistering only xdp_rxq_info's memory model, unregister it altogether and register it again and have xdp_rxq_info with correct frag_size value. Fixes: 1bbc04de ("ice: xsk: add RX multi-buffer support") Signed-off-by:
-
Maciej Fijalkowski authored
Ice and i40e ZC drivers currently set offset of a frag within skb_shared_info to 0, which is incorrect. xdp_buffs that come from xsk_buff_pool always have 256 bytes of a headroom, so they need to be taken into account to retrieve xdp_buff::data via skb_frag_address(). Otherwise, bpf_xdp_frags_increase_tail() would be starting its job from xdp_buff::data_hard_start which would result in overwriting existing payload. Fixes: 1c9ba9c1 ("i40e: xsk: add RX multi-buffer support") Fixes: 1bbc04de ("ice: xsk: add RX multi-buffer support") Acked-by:
-
Maciej Fijalkowski authored
xdp_rxq_info struct can be registered by drivers via two functions - xdp_rxq_info_reg() and __xdp_rxq_info_reg(). The latter one allows drivers that support XDP multi-buffer to set up xdp_rxq_info::frag_size which in turn will make it possible to grow the packet via bpf_xdp_adjust_tail() BPF helper. Currently, ice registers xdp_rxq_info in two spots: 1) ice_setup_rx_ring() // via xdp_rxq_info_reg(), BUG 2) ice_vsi_cfg_rxq() // via __xdp_rxq_info_reg(), OK Cited commit under fixes tag took care of setting up frag_size and updated registration scheme in 2) but it did not help as 1) is called before 2) and as shown above it uses old registration function. This means that 2) sees that xdp_rxq_info is already registered and never calls __xdp_rxq_info_reg() which leaves us with xdp_rxq_info::frag_size being set to 0. To fix this misbehavior, simply remove xdp_rxq_info_reg() call from ice_setup_rx_ring(). Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Acked-by:
-
Tirthendu Sarkar authored
XDP programs can shrink packets by calling the bpf_xdp_adjust_tail() helper function. For multi-buffer packets this may lead to reduction of frag count stored in skb_shared_info area of the xdp_buff struct. This results in issues with the current handling of XDP_PASS and XDP_DROP cases. For XDP_PASS, currently skb is being built using frag count of xdp_buffer before it was processed by XDP prog and thus will result in an inconsistent skb when frag count gets reduced by XDP prog. To fix this, get correct frag count while building the skb instead of using pre-obtained frag count. For XDP_DROP, current page recycling logic will not reuse the page but instead will adjust the pagecnt_bias so that the page can be freed. This again results in inconsistent behavior as the page refcnt has already been changed by the helper while freeing the frag(s) as part of shrinking the packet. To fix this, only adjust pagecnt_bias for buffers that are stillpart of the packet post-xdp prog run. Fixes: e213ced1 ("i40e: add support for XDP multi-buffer Rx") Reported-by:
Tirthendu Sarkar <tirthendu.sarkar@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-6-maciej.fijalkowski@intel.comSigned-off-by:
-
Maciej Fijalkowski authored
Fix an OOM panic in XDP_DRV mode when a XDP program shrinks a multi-buffer packet by 4k bytes and then redirects it to an AF_XDP socket. Since support for handling multi-buffer frames was added to XDP, usage of bpf_xdp_adjust_tail() helper within XDP program can free the page that given fragment occupies and in turn decrease the fragment count within skb_shared_info that is embedded in xdp_buff struct. In current ice driver codebase, it can become problematic when page recycling logic decides not to reuse the page. In such case, __page_frag_cache_drain() is used with ice_rx_buf::pagecnt_bias that was not adjusted after refcount of page was changed by XDP prog which in turn does not drain the refcount to 0 and page is never freed. To address this, let us store the count of frags before the XDP program was executed on Rx ring struct. This will be used to compare with current frag count from skb_shared_info embedded in xdp_buff. A smaller value in the latter indicates that XDP prog freed frag(s). Then, for given delta decrement pagecnt_bias for XDP_DROP verdict. While at it, let us also handle the EOP frag within ice_set_rx_bufs_act() to make our life easier, so all of the adjustments needed to be applied against freed frags are performed in the single place. Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Acked-by:
-
Maciej Fijalkowski authored
Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea5012 ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by:
-
Maciej Fijalkowski authored
XDP multi-buffer support introduced XDP_FLAGS_HAS_FRAGS flag that is used by drivers to notify data path whether xdp_buff contains fragments or not. Data path looks up mentioned flag on first buffer that occupies the linear part of xdp_buff, so drivers only modify it there. This is sufficient for SKB and XDP_DRV modes as usually xdp_buff is allocated on stack or it resides within struct representing driver's queue and fragments are carried via skb_frag_t structs. IOW, we are dealing with only one xdp_buff. ZC mode though relies on list of xdp_buff structs that is carried via xsk_buff_pool::xskb_list, so ZC data path has to make sure that fragments do *not* have XDP_FLAGS_HAS_FRAGS set. Otherwise, xsk_buff_free() could misbehave if it would be executed against xdp_buff that carries a frag with XDP_FLAGS_HAS_FRAGS flag set. Such scenario can take place when within supplied XDP program bpf_xdp_adjust_tail() is used with negative offset that would in turn release the tail fragment from multi-buffer frame. Calling xsk_buff_free() on tail fragment with XDP_FLAGS_HAS_FRAGS would result in releasing all the nodes from xskb_list that were produced by driver before XDP program execution, which is not what is intended - only tail fragment should be deleted from xskb_list and then it should be put onto xsk_buff_pool::free_list. Such multi-buffer frame will never make it up to user space, so from AF_XDP application POV there would be no traffic running, however due to free_list getting constantly new nodes, driver will be able to feed HW Rx queue with recycled buffers. Bottom line is that instead of traffic being redirected to user space, it would be continuously dropped. To fix this, let us clear the mentioned flag on xsk_buff_pool side during xdp_buff initialization, which is what should have been done right from the start of XSK multi-buffer support. Fixes: 1bbc04de ("ice: xsk: add RX multi-buffer support") Fixes: 1c9ba9c1 ("i40e: xsk: add RX multi-buffer support") Fixes: 24ea5012 ("xsk: support mbuf on ZC RX") Signed-off-by:
-
Maciej Fijalkowski authored
Add missing xsk_buff_free() call when __xsk_rcv_zc() failed to produce descriptor to XSK Rx queue. Fixes: 24ea5012 ("xsk: support mbuf on ZC RX") Acked-by:
-
- 24 Jan, 2024 19 commits
-
-
Jakub Kicinski authored
Breno Leitao says: ==================== Fix MODULE_DESCRIPTION() for net (p2) There are hundreds of network modules that misses MODULE_DESCRIPTION(), causing a warnning when compiling with W=1. Example: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o This part2 of the patchset focus on the drivers/net/ethernet drivers. There are still some missing warnings in drivers/net/ethernet that will be fixed in an upcoming patchset. v1: https://lore.kernel.org/all/20240122184543.2501493-2-leitao@debian.org/ ==================== Link: https://lore.kernel.org/r/20240123190332.677489-1-leitao@debian.orgSigned-off-by: -
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Marvel RVU mbox driver. Signed-off-by:
Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-11-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the LiteX Liteeth Ethernet device. Signed-off-by:
Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20240123190332.677489-10-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Freescale PQ MDIO driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the FEC (MPC8xx) Ethernet controller. Signed-off-by:
Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20240123190332.677489-8-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the NXP ENETC Ethernet driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the EZchip NPS ethernet driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Cirrus EP93xx ethernet driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Cavium Liquidio. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom iProc GBit driver. Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240123190332.677489-3-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the good old 8390 modules and drivers. Signed-off-by:
-
Jakub Kicinski authored
This test is missing a whole bunch of checks for interface renaming and one ifup. Presumably it was only used on a system with renaming disabled and NetworkManager running. Fixes: 91f430b2 ("selftests: net: add a test for UDP tunnel info infra") Acked-by:
-
Jakub Kicinski authored
If there is more than 32 cpus the bitmask will start to contain commas, leading to: ./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected Remove the commas, bash doesn't interpret leading zeroes as oct so that should be good enough. Switch to bash, Simon reports that not all shells support this type of substitution. Fixes: c12e0d5f ("self-tests: introduce self-tests for RPS default mask") Reviewed-by:
-
Jenishkumar Maheshbhai Patel authored
Register value persist after booting the kernel using kexec which results in kernel panic. Thus clear the BM pool registers before initialisation to fix the issue. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Jenishkumar Maheshbhai Patel <jpatel2@marvell.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://lore.kernel.org/r/20240119035914.2595665-1-jpatel2@marvell.comSigned-off-by:
-
Bernd Edlinger authored
otherwise the synopsys_id value may be read out wrong, because the GMAC_VERSION register might still be in reset state, for at least 1 us after the reset is de-asserted. Add a wait for 10 us before continuing to be on the safe side. > From what have you got that delay value? Just try and error, with very old linux versions and old gcc versions the synopsys_id was read out correctly most of the time (but not always), with recent linux versions and recnet gcc versions it was read out wrongly most of the time, but again not always. I don't have access to the VHDL code in question, so I cannot tell why it takes so long to get the correct values, I also do not have more than a few hardware samples, so I cannot tell how long this timeout must be in worst case. Experimentally I can tell that the register is read several times as zero immediately after the reset is de-asserted, also adding several no-ops is not enough, adding a printk is enough, also udelay(1) seems to be enough but I tried that not very often, and I have not access to many hardware samples to be 100% sure about the necessary delay. And since the udelay here is only executed once per device instance, it seems acceptable to delay the boot for 10 us. BTW: my hardware's synopsys id is 0x37. Fixes: c5e4ddbd ("net: stmmac: Add support for optional reset control") Signed-off-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/AS8P193MB1285A810BD78C111E7F6AA34E4752@AS8P193MB1285.EURP193.PROD.OUTLOOK.COMSigned-off-by:
-
Pablo Neira Ayuso authored
Several expressions explicitly refer to NF_INET_* hook definitions from expr->ops->validate, however, family is not validated. Bail out with EOPNOTSUPP in case they are used from unsupported families. Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables") Fixes: a3c90f7a ("netfilter: nf_tables: flow offload expression") Fixes: 2fa84193 ("netfilter: nf_tables: introduce routing expression") Fixes: 554ced0a ("netfilter: nf_tables: add support for native socket matching") Fixes: ad49d86e ("netfilter: nf_tables: Add synproxy support") Fixes: 4ed8eb65 ("netfilter: nf_tables: Add native tproxy support") Fixes: 6c472602 ("netfilter: nf_tables: add xfrm expression") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
This reverts commit e0abdadc. core.c:nf_hook_slow assumes that the upper 16 bits of NF_DROP verdicts contain a valid errno, i.e. -EPERM, -EHOSTUNREACH or similar, or 0. Due to the reverted commit, its possible to provide a positive value, e.g. NF_ACCEPT (1), which results in use-after-free. Its not clear to me why this commit was made. NF_QUEUE is not used by nftables; "queue" rules in nftables will result in use of "nft_queue" expression. If we later need to allow specifiying errno values from userspace (do not know why), this has to call NF_DROP_GETERR and check that "err <= 0" holds true. Fixes: e0abdadc ("netfilter: nf_tables: accept QUEUE/DROP verdict parameters") Cc: stable@vger.kernel.org Reported-by:
Notselwyn <notselwyn@pwning.tech> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
nftables has two types of sets/maps, one where userspace defines the name, and anonymous sets/maps, where userspace defines a template name. For the latter, kernel requires presence of exactly one "%d". nftables uses "__set%d" and "__map%d" for this. The kernel will expand the format specifier and replaces it with the smallest unused number. As-is, userspace could define a template name that allows to move the set name past the 256 bytes upperlimit (post-expansion). I don't see how this could be a problem, but I would prefer if userspace cannot do this, so add a limit of 16 bytes for the '%d' template name. 16 bytes is the old total upper limit for set names that existed when nf_tables was merged initially. Fixes: 38745490 ("netfilter: nf_tables: Allow set names of up to 255 chars") Signed-off-by:
-
Florian Westphal authored
Reject bogus configs where internal token counter wraps around. This only occurs with very very large requests, such as 17gbyte/s. Its better to reject this rather than having incorrect ratelimit. Fixes: d2168e84 ("netfilter: nft_limit: add per-byte limiting") Signed-off-by:
-
