Replace use of screen_info state with the correct interfaces from
the aperture helpers. The state is only for architecture and firmware
code. It is not guaranteed to contain valid data. Drivers are thus
not allowed to use it.

For removing conflicting firmware framebuffers, there are aperture
helpers. Hence replace screen_info with the correct functions that will
remove conflicting framebuffers for the hypervfb driver. For GEN1 PCI
devices, the driver reads the framebuffer base and size from the PCI
BAR, and uses the range for removing the firmware framebuffer. For
GEN2 VMBUS devices no range can be detected, so the driver clears all
firmware framebuffers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Replace use of screen_info state with the correct interface from
the aperture helpers. The state is only for architecture and firmware
code. It is not guaranteed to contain valid data. Drivers are thus
not allowed to use it.

For removing conflicting firmware framebuffers, there are aperture
helpers. Hence replace screen_info with the correct function that will
remove conflicting framebuffers for the hyperv-drm driver. Also
move the call to the correct place within the driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>

When built-in, the sis driver tries to detect the current display mode
from the global screen_info state. That state is only for architecture
and firmware code. Drivers should not use it directly as it's not
guaranteed to contain valid information.

Remove the mode-detection code from sis. Drivers that want to detect a
pre-set mode on probe should read the hardware registers directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Currently the %d format specifier is being used for unsigned int values.
Fix this by using the correct %u format specifier. Cleans up cppcheck
warnings:

warning: %d in format string (no. 1) requires 'int' but the argument
type is 'unsigned int'. [invalidPrintfArgType_sint]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>

The info field in struct sti_struct was used to detect the default
display device. That test is now done with the respective Linux device
and the info field is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Update fb_is_primary device() on parisc to detect the primary display
device from the Linux device instance. Aligns the code with the other
architectures. A later patch will remove the fbdev dependency from the
function's interface.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Allocate stifb's instance of fb_info with framebuffer_alloc(). This
is the preferred way of creating fb_info with associated driver data
stored in struct fb_info.par. Requires several, but minor, changes
through out the driver's code.

The intended side effect of this patch is that the new instance of
struct fb_info now has its device field correctly set to the parent
device of the STI ROM. A later patch can detect if the device is the
firmware's primary output. It is also now correctly located within
the Linux device hierarchy.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Store the ROM's parent device in each STI struct, so we can associate
the STI framebuffer with a device.

The new field will eventually replace the fbdev subsystem's info field,
which the function fb_is_primary_device() currently requires to detect
the firmware's output. By using the device instead of the framebuffer
info, a later patch can generalize the helper for use in non-fbdev code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>

When framebuffer gets closed, the queued deferred IO gets cancelled. This
can cause some last display data to vanish. This is problematic for users
who send a still image to the framebuffer, then close the file: the image
may never appear.

To ensure none of display data get lost, flush the queued deferred IO
first before closing.

Another possible solution is to delete the cancel_delayed_work_sync()
instead. The difference is that the display may appear some time after
closing. However, the clearing of page mapping after this needs to be
removed too, because the page mapping is used by the deferred work. It is
not completely obvious whether it is okay to not clear the page mapping.
For a patch intended for stable trees, go with the simple and obvious
solution.

Fixes: 60b59bea ("fbdev: mm: Deferred IO support")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>

The driver's fsync() is supposed to flush any pending operation to
hardware. It is implemented in this driver by cancelling the queued
deferred IO first, then schedule it for "immediate execution" by calling
schedule_delayed_work() again with delay=0. However, setting delay=0
only means the work is scheduled immediately, it does not mean the work
is executed immediately. There is no guarantee that the work is finished
after schedule_delayed_work() returns. After this driver's fsync()
returns, there can still be pending work. Furthermore, if close() is
called by users immediately after fsync(), the pending work gets
cancelled and fsync() may do nothing.

To ensure that the deferred IO completes, use flush_delayed_work()
instead. Write operations to this driver either write to the device
directly, or invoke schedule_delayed_work(); so by flushing the
workqueue, it can be guaranteed that all previous writes make it to the
device.

Fixes: 5e841b88 ("fb: fsync() method for deferred I/O flush.")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>

We have managed to ascertain that all users of the old FBDEV
code that are out of tree are now gone.

The new DRM driver can be found in drivers/gpu/drm/pl111/.

The remaining out of tree user was the ARM FVP emulation
platform, running Android. Thanks to changes in Android
versions 13 and 14, Android can now use the DRM driver when
being emulated under FVP. Some final patches are being put
in place to make it fully featured.

This is essentially a revert of the partial revert in
commit 112c3523 ("Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>

As far as anybody can tell, this product never shipped.  If it did,
it shipped in 2007 and nobody has access to one any more.  Remove the
fbdev driver and the backlight driver.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Fix kernel-doc warnings found when using "W=1".

hgafb.c:370: warning: No description found for return value of 'hgafb_open'
hgafb.c:384: warning: No description found for return value of 'hgafb_release'
hgafb.c:406: warning: No description found for return value of 'hgafb_setcolreg'
hgafb.c:425: warning: No description found for return value of 'hgafb_pan_display'
hgafb.c:425: warning: expecting prototype for hga_pan_display(). Prototype was for hgafb_pan_display() instead
hgafb.c:455: warning: No description found for return value of 'hgafb_blank'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-nvidia@lists.surfsouth.com
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>

Fixes: 641b4b1b ("video: mmpdisp: add spi port in display controller")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Explicitly cast __iomem pointer to const void* with __force to fix the
following warning:

   incorrect type in argument 1 (different address spaces)
      expected void const volatile *address
      got char [noderef] __iomem *screen_base
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311161120.BgyxTBMQ-lkp@intel.com/Signed-off-by: Helge Deller <deller@gmx.de>

Linux kernel coding style uses '*/' on a separate line at the end of
multi line comments.

Fix block comments by moving '*/' at the end of block comments on a
separate line as reported by checkpatch:

WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Resolve the following warning reported by checkpatch:

WARNING: Prefer using '"%s...", __func__' to using 'imxfb_blank', this function's name, in a string
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Resolve the following warning reported by checkpatch:

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

This made it necessary to move the 'fbi->pdev = pdev' setting to the
beginning of the driver's probing.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Fix the following checkpatch error:

ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Resolve the following warning reported by checkpatch:

WARNING: Unnecessary ftrace-like logging - prefer using ftrace
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Resolve the following warning reported by checkpatch.pl:

WARNING: Missing or malformed SPDX-License-Identifier tag in line 1

The patch also removes some license info made redundant by the addition
of the SPDX tag.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The patch gets rid of magic numbers replacing them with appropriate
macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Replace opencoded masking and shifting, with BIT(), GENMASK(),
FIELD_GET() and FIELD_PREP() macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The patch moves the bitfields of the PCR register near the macro that
defines its offset, just like for all the other registers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The previous setting did not take into account the CSTN mode.
For the H_WAIT_2 bitfield (bits 0-7) of the LCDC Horizontal Configuration
Register (LCDCR), the IMX25RM manual states that:

In TFT mode, it specifies the number of SCLK periods between the end of
HSYNC and the beginning of OE signal, and the total delay time equals
(H_WAIT_2 + 3) of SCLK periods.
In CSTN mode, it specifies the number of SCLK periods between the end of
HSYNC and the first display data in each line, and the total delay time
equals (H_WAIT_2 + 2) of SCLK periods.

The patch handles both cases.

Fixes: 4e47382f ("fbdev: imxfb: warn about invalid left/right margin")
Fixes: 7e8549bc ("imxfb: Fix margin settings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull s390 updates from Alexander Gordeev:

 - Add machine variable capacity information to /proc/sysinfo.

 - Limit the waste of page tables and always align vmalloc area size and
   base address on segment boundary.

 - Fix a memory leak when an attempt to register interruption sub class
   (ISC) for the adjunct-processor (AP) guest failed.

 - Reset response code AP_RESPONSE_INVALID_GISA to understandable by
   guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
   interruption sub class (ISC) registration attempt.

 - Improve reaction to adjunct-processor (AP)
   AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
   on behalf of a guest.

 - Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
   queue device bound to the vfio_ap device driver when the mediated
   device is attached to a guest, but the queue device is not passed
   through.

 - Rework struct ap_card to hold the whole adjunct-processor (AP) card
   hardware information. As result, all the ugly bit checks are replaced
   by simple evaluations of the required bit fields.

 - Improve handling of some weird scenarios between service element (SE)
   host and SE guest with adjunct-processor (AP) pass-through support.

 - Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
   the previous value of the to be changed control register. This is
   useful if a bit is only changed temporarily and the previous content
   needs to be restored.

 - The kernel starts with machine checks disabled and is expected to
   enable it once trap_init() is called. However the implementation
   allows machine checks early. Consistently enable it in trap_init()
   only.

 - local_mcck_disable() and local_mcck_enable() assume that machine
   checks are always enabled. Instead implement and use
   local_mcck_save() and local_mcck_restore() to disable machine checks
   and restore the previous state.

 - Modification of floating point control (FPC) register of a traced
   process using ptrace interface may lead to corruption of the FPC
   register of the tracing process. Fix this.

 - kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
   control (FPC) register in vCPU, but may lead to corruption of the FPC
   register of the host process. Fix this.

 - Use READ_ONCE() to read a vCPU floating point register value from the
   memory mapped area. This avoids that, depending on code generation, a
   different value is tested for validity than the one that is used.

 - Get rid of test_fp_ctl(), since it is quite subtle to use it
   correctly. Instead copy a new floating point control register value
   into its save area and test the validity of the new value when
   loading it.

 - Remove superfluous save_fpu_regs() call.

 - Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
   provide the vector facility since many years and the need to make the
   task structure size dependent on the vector facility does not exist.

 - Remove the "novx" kernel command line option, as the vector code runs
   without any problems since many years.

 - Add the vector facility to the z13 architecture level set (ALS). All
   hypervisors support the vector facility since many years. This allows
   compile time optimizations of the kernel.

 - Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
   result, the compiled code will have less runtime checks and less
   code.

 - Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.

 - Convert the struct subchannel spinlock from pointer to member.

* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
  Revert "s390: update defconfigs"
  s390/cio: make sch->lock spinlock pointer a member
  s390: update defconfigs
  s390/mm: convert pgste locking functions to C
  s390/fpu: get rid of MACHINE_HAS_VX
  s390/als: add vector facility to z13 architecture level set
  s390/fpu: remove "novx" option
  s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
  KVM: s390: remove superfluous save_fpu_regs() call
  s390/fpu: get rid of test_fp_ctl()
  KVM: s390: use READ_ONCE() to read fpc register value
  KVM: s390: fix setting of fpc register
  s390/ptrace: handle setting of fpc register correctly
  s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
  s390/nmi: consistently enable machine checks in trap_init()
  s390/ctlreg: return old register contents when changing bits
  s390/ap: handle outband SE bind state change
  s390/ap: store TAPQ hwinfo in struct ap_card
  s390/vfio-ap: fix sysfs status attribute for AP queue devices
  s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
  ...

Pull asm-generic cleanups from Arnd Bergmann:
 "A series from Baoquan He cleans up the asm-generic/io.h to remove the
  ioremap_uc() definition from everything except x86, which still needs
  it for pre-PAT systems. This series notably contains a patch from
  Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
  other architecture does, enabling future cleanups.

  Some of my own patches fix -Wmissing-prototype warnings in
  architecture specific code across several architectures. This is now
  needed as the warning is enabled by default. There are still some
  remaining warnings in minor platforms, but the series should catch
  most of the widely used ones make them more consistent with one
  another.

  David McKay fixes a bug in __generic_cmpxchg_local() when this is used
  on 64-bit architectures. This could currently only affect parisc64 and
  sparc64.

  Additional cleanups address from Linus Walleij, Uwe Kleine-König,
  Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
  between architectures"

* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: Fix 32 bit __generic_cmpxchg_local
  Hexagon: Make pfn accessors statics inlines
  ARC: mm: Make virt_to_pfn() a static inline
  mips: remove extraneous asm-generic/iomap.h include
  sparc: Use $(kecho) to announce kernel images being ready
  arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
  csky: fix arch_jump_label_transform_static override
  arch: add do_page_fault prototypes
  arch: add missing prepare_ftrace_return() prototypes
  arch: vdso: consolidate gettime prototypes
  arch: include linux/cpu.h for trap_init() prototype
  arch: fix asm-offsets.c building with -Wmissing-prototypes
  arch: consolidate arch_irq_work_raise prototypes
  hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
  asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
  mips: io: remove duplicated codes
  arch/*/io.h: remove ioremap_uc in some architectures
  mips: add <asm-generic/io.h> including

Pull module updates from Luis Chamberlain:
 "Just one cleanup and one documentation improvement change. No
  functional changes"

* tag 'modules-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  kernel/module: improve documentation for try_module_get()
  module: Remove redundant TASK_UNINTERRUPTIBLE

Pull sysctl updates from Luis Chamberlain:
 "To help make the move of sysctls out of kernel/sysctl.c not incur a
  size penalty sysctl has been changed to allow us to not require the
  sentinel, the final empty element on the sysctl array. Joel Granados
  has been doing all this work.

  In the v6.6 kernel we got the major infrastructure changes required to
  support this. For v6.7 we had all arch/ and drivers/ modified to
  remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
  directory only.

  The kernel/ directory is left but we'll save that for v6.9-rc1 as
  those patches are still being reviewed. After that we then can expect
  also the removal of the no longer needed check for procname == NULL.

  Let us recap the purpose of this work:

   - this helps reduce the overall build time size of the kernel and run
     time memory consumed by the kernel by about ~64 bytes per array

   - the extra 64-byte penalty is no longer inncurred now when we move
     sysctls out from kernel/sysctl.c to their own files

  Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
  see further work by Thomas Weißschuh with the constificatin of the
  struct ctl_table.

  Due to Joel Granados's work, and to help bring in new blood, I have
  suggested for him to become a maintainer and he's accepted. So for
  v6.9-rc1 I look forward to seeing him sent you a pull request for
  further sysctl changes. This also removes Iurii Zaikin as a maintainer
  as he has moved on to other projects and has had no time to help at
  all"

* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: remove struct ctl_path
  sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
  coda: Remove the now superfluous sentinel elements from ctl_table array
  sysctl: Remove the now superfluous sentinel elements from ctl_table array
  fs: Remove the now superfluous sentinel elements from ctl_table array
  cachefiles: Remove the now superfluous sentinel element from ctl_table array
  sysclt: Clarify the results of selftest run
  sysctl: Add a selftest for handling empty dirs
  sysctl: Fix out of bounds access for empty sysctl registers
  MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
  MAINTAINERS: remove Iurii Zaikin from proc sysctl

Pull header cleanups from Kent Overstreet:
 "The goal is to get sched.h down to a type only header, so the main
  thing happening in this patchset is splitting out various _types.h
  headers and dependency fixups, as well as moving some things out of
  sched.h to better locations.

  This is prep work for the memory allocation profiling patchset which
  adds new sched.h interdepencencies"

* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
  Kill sched.h dependency on rcupdate.h
  kill unnecessary thread_info.h include
  Kill unnecessary kernel.h include
  preempt.h: Kill dependency on list.h
  rseq: Split out rseq.h from sched.h
  LoongArch: signal.c: add header file to fix build error
  restart_block: Trim includes
  lockdep: move held_lock to lockdep_types.h
  sem: Split out sem_types.h
  uidgid: Split out uidgid_types.h
  seccomp: Split out seccomp_types.h
  refcount: Split out refcount_types.h
  uapi/linux/resource.h: fix include
  x86/signal: kill dependency on time.h
  syscall_user_dispatch.h: split out *_types.h
  mm_types_task.h: Trim dependencies
  Split out irqflags_types.h
  ipc: Kill bogus dependency on spinlock.h
  shm: Slim down dependencies
  workqueue: Split out workqueue_types.h
  ...

Pull bcachefs updates from Kent Overstreet:

 - btree write buffer rewrite: instead of adding keys to the btree write
   buffer at transaction commit time, we now journal them with a
   different journal entry type and copy them from the journal to the
   write buffer just prior to journal write.

   This reduces the number of atomic operations on shared cachelines in
   the transaction commit path and is a signicant performance
   improvement on some workloads: multithreaded 4k random writes went
   from ~650k iops to ~850k iops.

 - Bring back optimistic spinning for six locks: the new implementation
   doesn't use osq locks; instead we add to the lock waitlist as normal,
   and then spin on the lock_acquired bit in the waitlist entry, _not_
   the lock itself.

 - New ioctls:

    - BCH_IOCTL_DEV_USAGE_V2, which allows for new data types

    - BCH_IOCTL_OFFLINE_FSCK, which runs the kernel implementation of
      fsck but without mounting: useful for transparently using the
      kernel version of fsck from 'bcachefs fsck' when the kernel
      version is a better match for the on disk filesystem.

    - BCH_IOCTL_ONLINE_FSCK: online fsck. Not all passes are supported
      yet, but the passes that are supported are fully featured - errors
      may be corrected as normal.

   The new ioctls use the new 'thread_with_file' abstraction for kicking
   off a kthread that's tied to a file descriptor returned to userspace
   via the ioctl.

 - btree_paths within a btree_trans are now dynamically growable,
   instead of being limited to 64. This is important for the
   check_directory_structure phase of fsck, and also fixes some issues
   we were having with btree path overflow in the reflink btree.

 - Trigger refactoring; prep work for the upcoming disk space accounting
   rewrite

 - Numerous bugfixes :)

* tag 'bcachefs-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (226 commits)
  bcachefs: eytzinger0_find() search should be const
  bcachefs: move "ptrs not changing" optimization to bch2_trigger_extent()
  bcachefs: fix simulateously upgrading & downgrading
  bcachefs: Restart recovery passes more reliably
  bcachefs: bch2_dump_bset() doesn't choke on u64s == 0
  bcachefs: improve checksum error messages
  bcachefs: improve validate_bset_keys()
  bcachefs: print sb magic when relevant
  bcachefs: __bch2_sb_field_to_text()
  bcachefs: %pg is banished
  bcachefs: Improve would_deadlock trace event
  bcachefs: fsck_err()s don't need to manually check c->sb.version anymore
  bcachefs: Upgrades now specify errors to fix, like downgrades
  bcachefs: no thread_with_file in userspace
  bcachefs: Don't autofix errors we can't fix
  bcachefs: add missing bch2_latency_acct() call
  bcachefs: increase max_active on io_complete_wq
  bcachefs: add time_stats for btree_node_read_done()
  bcachefs: don't clear accessed bit in btree node fill
  bcachefs: Add an option to control btree node prefetching
  ...

Pull smb client fixes from Steve French:
 "Various smb client fixes, most related to better handling special file
  types:

   - Improve handling of special file types:
      - performance improvement (better compounding and better caching
        of readdir entries that are reparse points)
      - extend support for creating special files (sockets, fifos,
        block/char devices)
      - fix renaming and hardlinking of reparse points
      - extend support for creating symlinks with IO_REPARSE_TAG_SYMLINK

   - Multichannel logging improvement

   - Exception handling fix

   - Minor cleanups"

* tag 'v6.8-rc-part1-smb-client' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: remove unneeded return statement
  cifs: make cifs_chan_update_iface() a void function
  cifs: delete unnecessary NULL checks in cifs_chan_update_iface()
  cifs: get rid of dup length check in parse_reparse_point()
  smb: client: stop revalidating reparse points unnecessarily
  cifs: Pass unbyteswapped eof value into SMB2_set_eof()
  smb3: Improve exception handling in allocate_mr_list()
  cifs: fix in logging in cifs_chan_update_iface
  smb: client: handle special files and symlinks in SMB3 POSIX
  smb: client: cleanup smb2_query_reparse_point()
  smb: client: allow creating symlinks via reparse points
  smb: client: fix hardlinking of reparse points
  smb: client: fix renaming of reparse points
  smb: client: optimise reparse point querying
  smb: client: allow creating special files via reparse points
  smb: client: extend smb2_compound_op() to accept more commands
  smb: client: Fix minor whitespace errors and warnings

Pull nfs client updates from Anna Schumaker:
 "New Features:
   - Always ask for type with READDIR
   - Remove nfs_writepage()

  Bugfixes:
   - Fix a suspicious RCU usage warning
   - Fix a blocklayoutdriver reference leak
   - Fix the block driver's calculation of layoutget size
   - Fix handling NFS4ERR_RETURNCONFLICT
   - Fix _xprt_switch_find_current_entry()
   - Fix v4.1 backchannel request timeouts
   - Don't add zero-length pnfs block devices
   - Use the parent cred in nfs_access_login_time()

  Cleanups:
   - A few improvements when dealing with referring calls from the
     server
   - Clean up various unused variables, struct fields, and function
     calls
   - Various tracepoint improvements"

* tag 'nfs-for-6.8-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (21 commits)
  NFSv4.1: Use the nfs_client's rpc timeouts for backchannel
  SUNRPC: Fixup v4.1 backchannel request timeouts
  rpc_pipefs: Replace one label in bl_resolve_deviceid()
  nfs: Remove writepage
  NFS: drop unused nfs_direct_req bytes_left
  pNFS: Fix the pnfs block driver's calculation of layoutget size
  nfs: print fileid in lookup tracepoints
  nfs: rename the nfs_async_rename_done tracepoint
  nfs: add new tracepoint at nfs4 revalidate entry point
  SUNRPC: fix _xprt_switch_find_current_entry logic
  NFSv4.1/pnfs: Ensure we handle the error NFS4ERR_RETURNCONFLICT
  NFSv4.1: if referring calls are complete, trust the stateid argument
  NFSv4: Track the number of referring calls in struct cb_process_state
  NFS: Use parent's objective cred in nfs_access_login_time()
  NFSv4: Always ask for type with READDIR
  pnfs/blocklayout: Don't add zero-length pnfs_block_dev
  blocklayoutdriver: Fix reference leak of pnfs_device_node
  SUNRPC: Fix a suspicious RCU usage warning
  SUNRPC: Create a helper function for accessing the rpc_clnt's xprt_switch
  SUNRPC: Remove unused function rpc_clnt_xprt_switch_put()
  ...

Pull ext4 updates from Ted Ts'o:
 "Various ext4 bug fixes and cleanups. The fixes are mostly in the
  fstrim and mballoc code paths.

  Also enable dioread_nolock in the case where the block size is less
  than the page size (dioread_nolock has been default in the bs == ps
  case for quite some time)"

* tag 'ext4_for_linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix inconsistent between segment fstrim and full fstrim
  ext4: fallback to complex scan if aligned scan doesn't work
  ext4: convert ext4_da_do_write_end() to take a folio
  ext4: allow for the last group to be marked as trimmed
  ext4: move ext4_check_bdev_write_error() into nojournal mode
  jbd2: abort journal when detecting metadata writeback error of fs dev
  jbd2: remove unused 'JBD2_CHECKPOINT_IO_ERROR' and 'j_atomic_flags'
  jbd2: replace journal state flag by checking errseq
  jbd2: add errseq to detect client fs's bdev writeback error
  ext4: improving calculation of 'fe_{len|start}' in mb_find_extent()
  ext4: clarify handling of unwritten bh in __ext4_block_zero_page_range()
  ext4: treat end of range as exclusive in ext4_zero_range()
  ext4: enable dioread_nolock as default for bs < ps case
  ext4: delete redundant calculations in ext4_mb_get_buddy_page_lock()
  ext4: reduce unnecessary memory allocation in alloc_flex_gd()
  ext4: avoid online resizing failures due to oversized flex bg
  ext4: remove unnecessary check from alloc_flex_gd()
  ext4: unify the type of flexbg_size to unsigned int

Pull unicode updates from Gabriel Krisman Bertazi:
 "Other than the update to MAINTAINERS, this PR has only a fix to stop
  ecryptfs from inadvertently mounting case-insensitive filesystems that
  it cannot handle, which would otherwise caused post-mount failures"

* tag 'unicode-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
  MAINTAINERS: update unicode maintainer e-mail address
  ecryptfs: Reject casefold directory inodes

Fix the size check added to dns_resolver_preparse() for the V1 server-list
header so that it doesn't give EINVAL if the size supplied is the same as
the size of the header struct (which should be valid).

This can be tested with:

        echo -n -e '\0\0\01\xff\0\0' | keyctl padd dns_resolver desc @p

which will give "add_key: Invalid argument" without this fix.

Fixes: 1997b3cb ("keys, dns: Fix missing size check of V1 server-list header")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/ZZ4fyY4r3rqgZL+4@xpf.sh.intel.com/Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull crypto updates from Herbert Xu:
 "API:
   - Add incremental lskcipher/skcipher processing

  Algorithms:
   - Remove SHA1 from drbg
   - Remove CFB and OFB

  Drivers:
   - Add comp high perf mode configuration in hisilicon/zip
   - Add support for 420xx devices in qat
   - Add IAA Compression Accelerator driver"

* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
  crypto: iaa - Account for cpu-less numa nodes
  crypto: scomp - fix req->dst buffer overflow
  crypto: sahara - add support for crypto_engine
  crypto: sahara - remove error message for bad aes request size
  crypto: sahara - remove unnecessary NULL assignments
  crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
  crypto: sahara - use dev_err_probe()
  crypto: sahara - use devm_clk_get_enabled()
  crypto: sahara - use BIT() macro
  crypto: sahara - clean up macro indentation
  crypto: sahara - do not resize req->src when doing hash operations
  crypto: sahara - fix processing hash requests with req->nbytes < sg->length
  crypto: sahara - improve error handling in sahara_sha_process()
  crypto: sahara - fix wait_for_completion_timeout() error handling
  crypto: sahara - fix ahash reqsize
  crypto: sahara - handle zero-length aes requests
  crypto: skcipher - remove excess kerneldoc members
  crypto: shash - remove excess kerneldoc members
  crypto: qat - generate dynamically arbiter mappings
  crypto: qat - add support for ring pair level telemetry
  ...

Pull tpm updates from Jarkko Sakkinen:
 "Just a couple fixes and no new features"

* tag 'tpmdd-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: cr50: fix kernel-doc warning and spelling
  tpm: nuvoton: Use i2c_get_match_data()

Pull hardening updates from Kees Cook:

 - Introduce the param_unknown_fn type and other clean ups (Andy
   Shevchenko)

 - Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
   Silva, Kees Cook)

 - Add KFENCE test to LKDTM (Stephen Boyd)

 - Various strncpy() refactorings (Justin Stitt)

 - Fix qnx4 to avoid writing into the smaller of two overlapping buffers

 - Various strlcpy() refactorings

* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  qnx4: Use get_directory_fname() in qnx4_match()
  qnx4: Extract dir entry filename processing into helper
  atags_proc: Add __counted_by for struct buffer and use struct_size()
  tracing/uprobe: Replace strlcpy() with strscpy()
  params: Fix multi-line comment style
  params: Sort headers
  params: Use size_add() for kmalloc()
  params: Do not go over the limit when getting the string length
  params: Introduce the param_unknown_fn type
  lkdtm: Add kfence read after free crash type
  nvme-fc: replace deprecated strncpy with strscpy
  nvdimm/btt: replace deprecated strncpy with strscpy
  nvme-fabrics: replace deprecated strncpy with strscpy
  drm/modes: replace deprecated strncpy with strscpy_pad
  afs: Add __counted_by for struct afs_acl and use struct_size()
  VMCI: Annotate struct vmci_handle_arr with __counted_by
  i40e: Annotate struct i40e_qvlist_info with __counted_by
  HID: uhid: replace deprecated strncpy with strscpy
  samples: Replace strlcpy() with strscpy()
  SUNRPC: Replace strlcpy() with strscpy()

Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>