- 01 Oct, 2021 6 commits
-
-
Derek Fang authored
When the system resumes from S3, if the system plays a beep, there is continuous "Zizi.." noise from HP that could be heard. It is caused by the SAR mode switch during the combo jack re-detection which be executed parallelly in a workqueue after the system resumes. This patch changes the behavior of SAR mode switch to avoid this issue. Signed-off-by:
Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211001074113.2223-2-derek.fang@realtek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Derek Fang authored
When codec's ASRC was enabled, the DA and AD filters use the reference clk which tracks the I2S clks. And if the I2S clks' timing of open and close are not expected, this patch allows the filters to switch to use sysclk if ASRC's ref clks disappeared and could fix the below possible issues: 1. Avoid DA filter to keep surplus samples. 2. Avoid that AD filter works failed during dapm's power on. For example, if I2S clks were closed before dacdat during playback off due to jack unplug, it causes ref clks disappeared and DA filter remained some samples which will produce pop noise on the next HP playback. ASRC auto-disable could clear the samples during the playback off. Signed-off-by:
-
Trevor Wu authored
platforms->of_node and codes->of_node are assigned in probe function, and of_node_put is called at the end of probe function, because of_node seems to be not used after probe functon In this patch, of_node_put is moved to platform remove function in case of_node is used at any occasions after probe function in the future. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20211001031601.3953-1-trevor.wu@mediatek.comSigned-off-by:
-
Malik_Hsu authored
Add a board config adl_mx98360a_rt5682 to support alc5682 headset codec and max98360a speaker amplifier. Follow Intel BT offload design by connecting alc5682 to SSP0 and max98360a to SSP1. Signed-off-by:
Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211001150316.414141-1-brent.lu@intel.comSigned-off-by:
-
Rikard Falkeborn authored
The struct tegra_machine_snd_ops is only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20211001114517.6752-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Simon Trimmer authored
This simplification allows the use of the standard kernel pattern of static inline dummy functions for debugfs code. Most systems will only have a small number of snd_soc_components so the memory impact is minimal. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Suggested-by:
-
- 30 Sep, 2021 8 commits
-
-
Jack Yu authored
The DAI clock is only used in I2S mode, to make it clear and to fix clock resource release issue, we move CCF clock related code to rt5682_i2c_probe to fix clock register/unregister issue. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210929054344.12112-1-jack.yu@realtek.comSigned-off-by:
-
Shengjiu Wang authored
On i.MX8ULP the audio interface and codec are controlled by Cortex-M domain, Cortex-M core provides audio service over rpmsg. The rpmsg audio function is almost same as i.MX7ULP platform, so share same configuration. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1632972413-22130-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Guo Zhengkui authored
Remove a repeated "#include <linux/firmware.h>" in line 32. Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Acked-by:
-
Peter Ujfalusi authored
We have growing number of options under SND_SOC_SOF_TOPLEVEL as SOF adaptation is growing (Intel, NXP, AMD and Mediatek) and new features are added. It will make the menuconfig user experience much cleaner if we move the SOF options under a separate page. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210930070438.16846-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Derek Fang authored
Fix the device-tree schema errors that be reported by using 'make dt_binding_check'. Signed-off-by:
-
Derek Fang authored
Revise the macro RT5682S_PLLB_SRC_MASK to 0x1 because the mux is only two-source. Signed-off-by:
-
Derek Fang authored
It could observe the debug messages more clearly by using dev_dbg. Signed-off-by:
-
Derek Fang authored
This reg is for SW reset. It shouldn't have default value, so remove. Signed-off-by:
-
- 29 Sep, 2021 2 commits
-
-
Rikard Falkeborn authored
The struct mop500_ab8500_ops is only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Rikard Falkeborn authored
These are only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
-
- 28 Sep, 2021 8 commits
-
-
Brent Lu authored
To follow 20-character length limitation of platform device name, we have only 7 character space for amplifier. Therefore, the last character of mx98357a and mx98360a is removed to save space. Signed-off-by:
-
Peter Ujfalusi authored
If we get an error on reply (msg->reply_error) then we should print the error value out. At the same time extend the print to include the message size as well and do the same in case of a timeout. Signed-off-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
-
Marc Herbert authored
These helped troubleshoot some DMA issue in SOF. Signed-off-by:
Marc Herbert <marc.herbert@intel.com> Reviewed-by:
-
Guennadi Liakhovetski authored
If an invalid stream is passed to snd_sof_ipc_msg_data() it won't fill the provided object with data. The caller has to be able to recognise such cases to avoid handling invalid data. Make the function return an error when failing. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
-
Trevor Wu authored
dp node and hdmi node are retrieved from of_parse_phandle(), so using of_node_put() on them before return. Signed-off-by:
-
Pierre-Louis Bossart authored
Sparse (make C=2) complains about undeclared variables. Fix by adding a real prototype instead of 'extern' in sof-of-dev.c Signed-off-by:
-
Ranjani Sridharan authored
There is no restore_stream flag anymmore. Signed-off-by:
-
Peter Ujfalusi authored
In order to provide more information in case of timeout observed while reading STREAM_SD_OFFSET, print out the stream name or in case there is no audio stream associated (like dma-trace), print "--" Signed-off-by:
-
- 27 Sep, 2021 16 commits
-
-
Mark Brown authored
Merge series "add driver to support firmware loading on Cirrus Logic DSPs" from Simon Trimmer <simont@opensource.cirrus.com>: This series of patches gradually separates the ASoC specific wm_adsp code from that required to manage firmware in Cirrus Logic DSPs. The series starts with renaming, progresses to splitting the functionality before finally moving the independent functionality into drivers/firmware so that it can be used by both the existing ASoC wm_adsp and new non-audio parts. Charles Keepax (3): ASoC: wm_adsp: Move check for control existence ASoC: wm_adsp: Switch to using wm_coeff_read_ctrl for compressed buffers ASoC: wm_adsp: Move sys_config_size to wm_adsp Simon Trimmer (13): ASoC: wm_adsp: Remove use of snd_ctl_elem_type_t ASoC: wm_adsp: Cancel ongoing work when removing controls ASoC: wm_adsp: Rename generic DSP support ASoC: wm_adsp: Introduce cs_dsp logging macros ASoC: wm_adsp: Separate some ASoC and generic functions ASoC: wm_adsp: Split DSP power operations into helper functions ASoC: wm_adsp: Separate generic cs_dsp_coeff_ctl handling ASoC: wm_adsp: Move check of dsp->running to better place ASoC: wm_adsp: Pass firmware names as parameters when starting DSP core ASoC: wm_adsp: move firmware loading to client ASoC: wm_adsp: Split out struct cs_dsp from struct wm_adsp ASoC: wm_adsp: Separate wm_adsp specifics in cs_dsp_client_ops firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs MAINTAINERS | 11 + drivers/firmware/Kconfig | 1 + drivers/firmware/Makefile | 1 + drivers/firmware/cirrus/Kconfig | 5 + drivers/firmware/cirrus/Makefile | 3 + drivers/firmware/cirrus/cs_dsp.c | 3109 ++++++++++++++++ include/linux/firmware/cirrus/cs_dsp.h | 242 ++ .../linux/firmware/cirrus}/wmfw.h | 8 +- sound/soc/codecs/Kconfig | 1 + sound/soc/codecs/cs47l15.c | 22 +- sound/soc/codecs/cs47l24.c | 20 +- sound/soc/codecs/cs47l35.c | 24 +- sound/soc/codecs/cs47l85.c | 32 +- sound/soc/codecs/cs47l90.c | 34 +- sound/soc/codecs/cs47l92.c | 20 +- sound/soc/codecs/madera.c | 18 +- sound/soc/codecs/wm2200.c | 30 +- sound/soc/codecs/wm5102.c | 16 +- sound/soc/codecs/wm5110.c | 24 +- sound/soc/codecs/wm_adsp.c | 3188 ++--------------- sound/soc/codecs/wm_adsp.h | 105 +- 21 files changed, 3794 insertions(+), 3120 deletions(-) create mode 100644 drivers/firmware/cirrus/Kconfig create mode 100644 drivers/firmware/cirrus/Makefile create mode 100644 drivers/firmware/cirrus/cs_dsp.c create mode 100644 include/linux/firmware/cirrus/cs_dsp.h rename {sound/soc/codecs => include/linux/firmware/cirrus}/wmfw.h (91%) -- 2.33.0 -
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak4458 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak5558 driver to use more modern terminology for clocking. Signed-off-by:
-
Sugar Zhang authored
Currently, The fixed 512KB prealloc buffer size is too larger for tiny memory kernel (such as 16MB memory). This patch adds the module option "prealloc_buffer_size_kbytes" to specify prealloc buffer size. It's suitable for cards which use the generic dmaengine pcm driver with no config. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1632394246-59341-1-git-send-email-sugar.zhang@rock-chips.comSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the dwc-i2s driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ak4671 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the alc5623 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of the effort to remove our old APIs based on outdated terminology update the Broadcom drivers to use modern terminology. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the cpcap driver to use more modern terminology for clocking. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210924231242.144692-1-colin.king@canonical.comSigned-off-by:
-
Geert Uytterhoeven authored
According to the WM8978 datasheet, the address of the device is fixed as 0011010 in 2-wire mode. Fixes: 5bd5699c ("ASoC: dt-bindings: Add WM8978 Binding") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/c99fc865e3fca6ea623661c52de7dc6a3c36c8b4.1632487554.git.geert+renesas@glider.beSigned-off-by:
-
Colin Ian King authored
There are spelling mistakes in dev_err error messages. Fix them. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the ad193x driver to use more modern terminology for clocking. Signed-off-by:
-
Rikard Falkeborn authored
The only usage of these is to assign their address to the ops field in the snd_soc_dai_driver struct, which is a pointer to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20210922205438.34519-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Stefan Binding authored
Some headsets require very different comparator thresholds for type detection, as well as longer settling times. In order to detect a larger number of headsets, use 2 thresholds to give maximum coverage (1.25V and 1.75V), as well as a longer settling time of 100ms. This will not affect default audotodetect mode and applies to manual mode type detection only. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210927111437.18113-1-vitalyr@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the adav80x driver to use more modern terminology for clocking. Signed-off-by:
-
