- 12 May, 2015 30 commits
-
-
Ludovic Desroches authored
commit a8d4e016 upstream. Maxburst was not set when doing the dma slave configuration. This value is checked by the recently introduced xdmac. It causes an error when doing the slave configuration and so prevents from using dma. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Michal Simek authored
commit 6befa9d8 upstream. Do not probe all serial drivers by of_serial.c which are using device_type = "serial"; property. Only drivers which have valid compatible strings listed in the driver should be probed. When PORT_UNKNOWN is setup probe will fail anyway. Arnd quotation about driver historical background: "when I wrote that driver initially, the idea was that it would get used as a stub to hook up all other serial drivers but after that, the common code learned to create platform devices from DT" This patch fix the problem with on the system with xilinx_uartps and 16550a where of_serial failed to register for xilinx_uartps and because of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking for irq with request_irq() EINVAL is returned. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Michal Simek authored
commit 5c90c07b upstream. For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type = "serial"; property in DT of_serial.c driver maps and unmaps IRQ (because driver probe fails). Then a driver is called but irq mapping is not created that's why driver is failing again in again on request_irq(). Based on this use platform_get_irq() instead of platform_get_resource() which is doing irq_desc allocation and driver itself can request IRQ. Fix both xilinx serial drivers in the tree. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Quentin Casasnovas authored
commit 0d3bba02 upstream. Phil and I found out a problem with commit: 7e860a6e ("cdc-acm: add sanity checks") It added some sanity checks to ignore potential garbage in CDC headers but also introduced a potential infinite loop. This can happen at the first loop iteration (elength = 0 in that case) if the description isn't a DT_CS_INTERFACE or later if 'buffer[0]' is zero. It should also be noted that the wrong length was being added to 'buffer' in case 'buffer[1]' was not a DT_CS_INTERFACE descriptor, since elength was assigned after that check in the loop. A specially crafted USB device could be used to trigger this infinite loop. Fixes: 7e860a6e ("cdc-acm: add sanity checks") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> CC: Oliver Neukum <oneukum@suse.de> CC: Adam Lee <adam8157@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Li Jun authored
commit a5a356ce upstream. Wrongly release mutex lock during otg_statemachine may result in re-enter otg_statemachine, which is not allowed, we should do next state transtition after previous one completed. Fixes: 826cfe75 ("usb: chipidea: add OTG fsm operation functions implementation") Signed-off-by:
Li Jun <jun.li@freescale.com> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Hans de Goede authored
commit 8e779c6c upstream. Testing has shown that ASM1053 devices do not work properly with transfers larger than 240 sectors, so set max_sectors to 240 on these. Reported-by:
Steve Bangert <sbangert@frontier.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Tested-by:
Steve Bangert <sbangert@frontier.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Hans de Goede authored
commit ee136af4 upstream. The usb-storage driver sets max_sectors = 240 in its scsi-host template, for uas we do not want to do that for all devices, but testing has shown that some devices need it. This commit adds a US_FL_MAX_SECTORS_240 flag for such devices, and implements support for it in uas.c, while at it it also adds support for US_FL_MAX_SECTORS_64 to uas.c. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Hans de Goede authored
commit a5011d44 upstream. uas_use_uas_driver may set some US_FL_foo flags during detection, currently these are stored in a local variable and then throw away, but these may be of interest to the caller, so add an extra parameter to (optionally) return the detected flags, and use this in the uas driver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoph Hellwig authored
commit 118c855b upstream. The 3w-9xxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoph Hellwig authored
commit 9cd95546 upstream. The 3w-xxxx driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoph Hellwig authored
commit 579d69bc upstream. The 3w-sas driver needs to tear down the dma mappings before returning the command to the midlayer, as there is no guarantee the sglist and count are valid after that point. Also remove the dma mapping helpers which have another inherent race due to the request_id index. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Torsten Luettgert <ml-lkml@enda.eu> Tested-by:
Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Mike Christie authored
commit 35e9a9f9 upstream. This works around a issue with qnap iscsi targets not handling large IOs very well. The target returns: VPD INQUIRY: Block limits page (SBC) Maximum compare and write length: 1 blocks Optimal transfer length granularity: 1 blocks Maximum transfer length: 4294967295 blocks Optimal transfer length: 4294967295 blocks Maximum prefetch, xdread, xdwrite transfer length: 0 blocks Maximum unmap LBA count: 8388607 Maximum unmap block descriptor count: 1 Optimal unmap granularity: 16383 Unmap granularity alignment valid: 0 Unmap granularity alignment: 0 Maximum write same length: 0xffffffff blocks Maximum atomic transfer length: 0 Atomic alignment: 0 Atomic transfer length granularity: 0 and it is *sometimes* able to handle at least one IO of size up to 8 MB. We have seen in traces where it will sometimes work, but other times it looks like it fails and it looks like it returns failures if we send multiple large IOs sometimes. Also it looks like it can return 2 different errors. It will sometimes send iscsi reject errors indicating out of resources or it will send invalid cdb illegal requests check conditions. And then when it sends iscsi rejects it does not seem to handle retries when there are command sequence holes, so I could not just add code to try and gracefully handle that error code. The problem is that we do not have a good contact for the company, so we are not able to determine under what conditions it returns which error and why it sometimes works. So, this patch just adds a new black list flag to set targets like this to the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19 caused this regression, so I also ccing stable. Reported-by:
Christian Hesse <list@eworm.de> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Alex Deucher authored
commit cd17e02f upstream. Seems to have problems with high mclks. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Takashi Iwai authored
commit 07b0e5d4 upstream. The emux-synth driver has a possible AB/BA mutex deadlock at unloading the emu10k1 driver: snd_emux_free() -> snd_emux_detach_seq(): mutex_lock(&emu->register_mutex) -> snd_seq_delete_kernel_client() -> snd_seq_free_client(): mutex_lock(®ister_mutex) snd_seq_release() -> snd_seq_free_client(): mutex_lock(®ister_mutex) -> snd_seq_delete_all_ports() -> snd_emux_unuse(): mutex_lock(&emu->register_mutex) Basically snd_emux_detach_seq() doesn't need a protection of emu->register_mutex as it's already being unregistered. So, we can get rid of this for avoiding the deadlock. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Takashi Iwai authored
commit d0226082 upstream. Some models provide too long string for the shortname that has 32bytes including the terminator, and it results in a non-terminated string exposed to the user-space. This isn't too critical, though, as the string is stopped at the succeeding longname string. This patch fixes such entries by dropping "SB" prefix (it's enough to fit within 32 bytes, so far). Meanwhile, it also changes strcpy() with strlcpy() to make sure that this kind of problem won't happen in future, too. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Marek Szyprowski authored
commit 6829e274 upstream. Buffers allocated by dma_alloc_coherent() are always zeroed on Alpha, ARM (32bit), MIPS, PowerPC, x86/x86_64 and probably other architectures. It turned out that some drivers rely on this 'feature'. Allocated buffer might be also exposed to userspace with dma_mmap() call, so clearing it is desired from security point of view to avoid exposing random memory to userspace. This patch unifies dma_alloc_coherent() behavior on ARM64 architecture with other implementations by unconditionally zeroing allocated buffer. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> [ luis: backported to 3.16: - dropped changes to __alloc_from_pool() which doesn't exist in 3.16 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Takashi Iwai authored
commit 7290006d upstream. This patch adds the missing flag to enable "Mute-LED Mode" mixer enum ctl for Thinkpads that have also the software mute-LED control. Reported-and-tested-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Takashi Iwai authored
commit ee52e56e upstream. The mute-LED mode control has the fixed on/off states that are supposed to remain on/off regardless of the master switch. However, this doesn't work actually because the vmaster hook is called in the vmaster code itself. This patch fixes it by calling the hook indirectly after checking the mute LED mode. Reported-and-tested-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Omar Sandoval authored
commit 909e26dc upstream. Whenever the check for a send in progress introduced in commit 521e0546 (btrfs: protect snapshots from deleting during send) is hit, we return without unlocking inode->i_mutex. This is easy to see with lockdep enabled: [ +0.000059] ================================================ [ +0.000028] [ BUG: lock held when returning to user space! ] [ +0.000029] 4.0.0-rc5-00096-g3c435c1e #93 Not tainted [ +0.000026] ------------------------------------------------ [ +0.000029] btrfs/211 is leaving the kernel with locks still held! [ +0.000029] 1 lock held by btrfs/211: [ +0.000023] #0: (&type->i_mutex_dir_key){+.+.+.}, at: [<ffffffff8135b8df>] btrfs_ioctl_snap_destroy+0x2df/0x7a0 Make sure we unlock it in the error path. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Omar Sandoval <osandov@osandov.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Bard Liao authored
commit 74d6ea52 upstream. The PLL output will be unstable in some cases. We can fix it by setting some registers. Signed-off-by:
Bard Liao <bardliao@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Charles Keepax authored
commit a2d97723 upstream. Correct small copy and paste error where autodisable was not being enabled for the SOC_DAPM_SINGLE_TLV_AUTODISABLE control. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Eric W. Biederman authored
commit cd4a4017 upstream. The only users of collect_mounts are in audit_tree.c In audit_trim_trees and audit_add_tree_rule the path passed into collect_mounts is generated from kern_path passed an audit_tree pathname which is guaranteed to be an absolute path. In those cases collect_mounts is obviously intended to work on mounted paths and if a race results in paths that are unmounted when collect_mounts it is reasonable to fail early. The paths passed into audit_tag_tree don't have the absolute path check. But are used to play with fsnotify and otherwise interact with the audit_trees, so again operating only on mounted paths appears reasonable. Avoid having to worry about what happens when we try and audit unmounted filesystems by restricting collect_mounts to mounts that appear in the mount tree. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
hujianyang authored
commit 9aa272b4 upstream. Running mtd-utils/tests/ubi-tests/io_basic.c could cause soft lockup or watchdog reset. It is because *updatevol* will perform ubi_check_volume() after updating finish and this function will full scan the updated lebs if the volume is initialized as STATIC_VOLUME. This patch adds *cond_resched()* in the loop of lebs scan to avoid soft lockup. Helped by Richard Weinberger <richard@nod.at> [ 2158.067096] INFO: rcu_sched self-detected stall on CPU { 1} (t=2101 jiffies g=1606 c=1605 q=56) [ 2158.172867] CPU: 1 PID: 2073 Comm: io_basic Tainted: G O 3.10.53 #21 [ 2158.172898] [<c000f624>] (unwind_backtrace+0x0/0x120) from [<c000c294>] (show_stack+0x10/0x14) [ 2158.172918] [<c000c294>] (show_stack+0x10/0x14) from [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) [ 2158.172936] [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) from [<c002b480>] (update_process_times+0x38/0x64) [ 2158.172953] [<c002b480>] (update_process_times+0x38/0x64) from [<c005ff38>] (tick_sched_handle+0x54/0x60) [ 2158.172966] [<c005ff38>] (tick_sched_handle+0x54/0x60) from [<c00601ac>] (tick_sched_timer+0x44/0x74) [ 2158.172978] [<c00601ac>] (tick_sched_timer+0x44/0x74) from [<c003f348>] (__run_hrtimer+0xc8/0x1b8) [ 2158.172992] [<c003f348>] (__run_hrtimer+0xc8/0x1b8) from [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) [ 2158.173007] [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) from [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) [ 2158.173022] [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) from [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) [ 2158.173036] [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) from [<c0082bd8>] (generic_handle_irq+0x20/0x30) [ 2158.173049] [<c0082bd8>] (generic_handle_irq+0x20/0x30) from [<c000969c>] (handle_IRQ+0x64/0x8c) [ 2158.173060] [<c000969c>] (handle_IRQ+0x64/0x8c) from [<c0008544>] (gic_handle_irq+0x3c/0x60) [ 2158.173074] [<c0008544>] (gic_handle_irq+0x3c/0x60) from [<c02f0f80>] (__irq_svc+0x40/0x50) [ 2158.173083] Exception stack(0xc4043c98 to 0xc4043ce0) [ 2158.173092] 3c80: c4043ce4 00000019 [ 2158.173102] 3ca0: 1f8a865f c050ad10 1f8a864c 00000031 c04b5970 0003ebce 00000000 f3550000 [ 2158.173113] 3cc0: bf00bc68 00000800 0003ebce c4043ce0 c0186d14 c0186cb8 80000013 ffffffff [ 2158.173130] [<c02f0f80>] (__irq_svc+0x40/0x50) from [<c0186cb8>] (read_current_timer+0x4/0x38) [ 2158.173145] [<c0186cb8>] (read_current_timer+0x4/0x38) from [<1f8a865f>] (0x1f8a865f) [ 2183.927097] BUG: soft lockup - CPU#1 stuck for 22s! [io_basic:2073] [ 2184.002229] Modules linked in: nandflash(O) [last unloaded: nandflash] Signed-off-by:
Wang Kai <morgan.wang@huawei.com> Signed-off-by:
hujianyang <hujianyang@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Vineet Gupta authored
commit e4140819 upstream. A malicious signal handler / restorer can DOS the system by fudging the user regs saved on stack, causing weird things such as sigreturn returning to user mode PC but cpu state still being kernel mode.... Ensure that in sigreturn path status32 always has U bit; any other bogosity (gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms. Reproducer signal handler: void handle_sig(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); regs->scratch.status32 = 0; } Before the fix, kernel would go off to weeds like below: --------->8----------- [ARCLinux]$ ./signal-test Path: /signal-test CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65 task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000 [ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698 [EFA ]: 0x00000010 [BLINK ]: 0x2007c1ee [ERET ]: 0x10698 [STAT32]: 0x00000000 : <-------- BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000 LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000 ... --------->8----------- Reported-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [ luis: backported to 3.16: used Vineet's backport to 3.14 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Matt Fleming authored
commit 44be28e9 upstream. It appears that the BayTrail-T class of hardware requires EFI in order to powerdown and reboot and no other reliable method exists. This quirk is generally applicable to all hardware that has the ACPI Hardware Reduced bit set, since usually ACPI would be the preferred method. Cc: Len Brown <len.brown@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> [ luis: backported to 3.16: - move changes from quirks.c into efi.c - adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Matt Fleming authored
commit 0c5ed61a upstream. Not only can EfiResetSystem() be used to reboot, it can also be used to power down machines. By and large, this functionality doesn't work very well across the range of EFI machines in the wild, so it should definitely only be used as a last resort. In an ideal world, this wouldn't be needed at all. Unfortunately, we're starting to see machines where EFI is the *only* reliable way to power down, and nothing else, not PCI, not ACPI, works. efi_poweroff_required() should be implemented on a per-architecture basis, since exactly when we should be using EFI runtime services is a platform-specific decision. There's no analogue for reboot because each architecture handles reboot very differently - the x86 code in particular is pretty complex. Patches to enable this for specific classes of hardware will be submitted separately. Tested-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Matt Fleming authored
commit 8562c99c upstream. Implement efi_reboot(), which is really just a wrapper around the EfiResetSystem() EFI runtime service, but it does at least allow us to funnel all callers through a single location. It also simplifies the callsites since users no longer need to check to see whether EFI_RUNTIME_SERVICES are enabled. Cc: Tony Luck <tony.luck@intel.com> Tested-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Ido Shamay authored
commit 07841f9d upstream. When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Benjamin Poirier authored
commit 42eab005 upstream. By default, the number of tx queues is limited by the number of online cpus in mlx4_en_get_profile(). However, this limit no longer holds after the ethtool .set_channels method has been called. In that situation, the driver may access invalid bits of certain cpumask variables when queue_index >= nr_cpu_ids. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Acked-by:
Ido Shamay <idos@mellanox.com> Fixes: d03a68f8 ("net/mlx4_en: Configure the XPS queue mapping on driver load") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Luis Henriques authored
Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
- 06 May, 2015 10 commits
-
-
David S. Miller authored
commit a134f083 upstream. If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Wen Xu <hotdog3645@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Lukas Czerner authored
commit 0f2af21a upstream. Currently there is a bug in zero range code which causes zero range calls to only allocate block aligned portion of the range, while ignoring the rest in some cases. In some cases, namely if the end of the range is past i_size, we do attempt to preallocate the last nonaligned block. However this might cause kernel to BUG() in some carefully designed zero range requests on setups where page size > block size. Fix this problem by first preallocating the entire range, including the nonaligned edges and converting the written extents to unwritten in the next step. This approach will also give us the advantage of having the range to be as linearly contiguous as possible. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Theodore Ts'o authored
commit 713e8dde upstream. We accidently aliased EXT4_EX_NOCACHE and EXT4_GET_CONVERT_UNWRITTEN falgs, which apparently was hiding a bug that was unmasked when this flag aliasing issue was addressed (see the subsequent commit). The reproduction case was: fsx -N 10000 -l 500000 -r 4096 -t 4096 -w 4096 -Z -R -W /vdb/junk ... which would cause fsx to report corruption in the data file. The fix we have is a bit of an overkill, but I'd much rather be conservative for now, and we can optimize ZERO_RANGE_FL handling later. The fact that we need to zap the extent_status cache for the inode is unfortunate, but correctness is far more important than performance. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Theodore Ts'o authored
commit bd30d702 upstream. Commit b8a86845 introduced an accidental flag aliasing between EXT4_EX_NOCACHE and EXT4_GET_BLOCKS_CONVERT_UNWRITTEN. Fortunately, this didn't introduce any untorward side effects --- we got lucky. Nevertheless, fix this and leave a warning to hopefully avoid this from happening in the future. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Rainer Koenig authored
commit 47c1ffb2 upstream. Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by:
Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Ulrik De Bie authored
commit 0dc15879 upstream. The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by:
Stefan Valouch <stefan@valouch.com> Tested-by:
Stefan Valouch <stefan@valouch.com> Tested-by:
Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
NeilBrown authored
commit c42bfd7f upstream. This button is treated as a wakeup source, so we need to initialise it correctly. Without the device_init_wakeup() call, dev->power.wakeup will be NULL, and pm_wakeup_event() will do nothing. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Ethan Zhao authored
commit cb57720b upstream. If ACPI _PPC changed notification happens before governor was initiated while kernel is booting, a NULL pointer dereference will be triggered: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 PGD 0 Oops: 0000 [#1] SMP ... ... RIP: 0010:[<ffffffff81470453>] [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 RSP: 0018:ffff881fcfbcfbb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff881fd11b3980 RCX: ffff88407fc20000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff881fd11b3980 RBP: ffff881fcfbcfbd8 R08: 0000000000000000 R09: 000000000000000f R10: ffffffff818068d0 R11: 0000000000000043 R12: 0000000000000004 R13: 0000000000000000 R14: ffffffff8196cae0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff881fffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000000018ae000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:3 (pid: 750, threadinfo ffff881fcfbce000, task ffff881fcf556400) Stack: ffff881fffc17d00 ffff881fcfbcfc18 ffff881fd11b3980 0000000000000000 ffff881fcfbcfc08 ffffffff81470d08 ffff881fd11b3980 0000000000000007 ffff881fcfbcfc18 ffff881fffc17d00 ffff881fcfbcfd28 ffffffff81472e9a Call Trace: [<ffffffff81470d08>] __cpufreq_set_policy+0x1b8/0x2e0 [<ffffffff81472e9a>] cpufreq_update_policy+0xca/0x150 [<ffffffff81472f20>] ? cpufreq_update_policy+0x150/0x150 [<ffffffff81324a96>] acpi_processor_ppc_has_changed+0x71/0x7b [<ffffffff81320bcd>] acpi_processor_notify+0x55/0x115 [<ffffffff812f9c29>] acpi_device_notify+0x19/0x1b [<ffffffff813084ca>] acpi_ev_notify_dispatch+0x41/0x5f [<ffffffff812f64a4>] acpi_os_execute_deferred+0x27/0x34 The root cause is a race conditon -- cpufreq core and acpi-cpufreq driver were initiated, but cpufreq_governor wasn't and _PPC changed notification happened, __cpufreq_governor() was called within acpi_os_execute_deferred kernel thread context. To fix this panic issue, add pointer checking code in __cpufreq_governor() before pointer policy->governor is to be dereferenced. Signed-off-by:
Ethan Zhao <ethan.zhao@oracle.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Thomas D authored
commit f82263c6 upstream. Since commit ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") turbostat's Makefile is using [...] BUILD_OUTPUT := $(PWD) [...] which obviously causes trouble when building "turbostat" with make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat because GNU make does not update nor guarantee that $PWD is set. This patch changes the Makefile to use $CURDIR instead, which GNU make guarantees to set and update (i.e. when using "make -C ...") and also adds support for the O= option (see "make help" in your root of your kernel source tree for more details). Link: https://bugs.gentoo.org/show_bug.cgi?id=533918 Fixes: ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") Signed-off-by:
Thomas D. <whissi@whissi.de> Cc: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Dan Carpenter authored
commit 13f6b191 upstream. Using the indenting we can see the curly braces were obviously intended. This is a static checker fix, but my guess is that we don't read enough bytes, because we don't calculate "t_len" correctly. Fixes: f1d82698 ('memstick: use fully asynchronous request processing') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-