- 14 Mar, 2018 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.17: UAPI Changes: plane: Add color encoding/range properties (Jyri) nouveau: Replace iturbt_709 property with color_encoding property (Ville) Core Changes: atomic: Move plane clipping into plane check helper (Ville) property: Multiple new property checks/verification (Ville) Driver Changes: rockchip: Fixes & improvements for rk3399/chromebook plus (various) sun4i: Add H3/H5 HDMI support (Jernej) i915: Add support for limited/full-range ycbcr toggling (Ville) pl111: Add bandwidth checking/limiting (Linus) Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Jyri Sarha <jsarha@ti.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> * tag 'drm-misc-next-2018-03-09-3' of git://anongit.freedesktop.org/drm/drm-misc: (85 commits) drm/rockchip: Don't use atomic constructs for psr drm/rockchip: analogix_dp: set psr activate/deactivate when enable/disable bridge drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind() drm/rockchip: inno_hdmi: reorder clk_disable_unprepare call in unbind drm/rockchip: inno_hdmi: Fix error handling path. drm/rockchip: dw-mipi-dsi: Fix connector and encoder cleanup. drm/nouveau: Replace the iturbt_709 prop with the standard COLOR_ENCODING prop drm/pl111: Use max memory bandwidth for resolution drm/bridge: sii902x: Retry status read after DDI I2C drm/pl111: Handle the RealView variant separately drm/pl111: Make the default BPP a per-variant variable drm: simple_kms_helper: Fix .mode_valid() documentation bridge: Elaborate a bit on dumb VGA bridges in Kconfig drm/atomic: Add new reverse iterator over all plane state (V2) drm: Reject bad property flag combinations drm: Make property flags u32 drm/uapi: Deprecate DRM_MODE_PROP_PENDING drm: WARN when trying to add enum value > 63 to a bitmask property drm: WARN when trying add enum values to non-enum/bitmask properties drm: Reject replacing property enum values ...
-
Dave Airlie authored
This was stopping me building on ARM after last pull. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
- 09 Mar, 2018 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More stuff for 4.17. Highlights: - More fixes for "wattman" like functionality (fine grained clk/voltage control) - Add more power profile infrastucture (context based dpm) - SR-IOV fixes - Add iomem debugging interface for use with umr - Powerplay and cgs cleanups - DC fixes and cleanups - ttm improvements - Misc cleanups all over * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (143 commits) drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amdgpu: replace iova debugfs file with iomem (v3) drm/amd/display: validate plane format on primary plane drm/amdgpu: Clean sdma wptr register when only enable wptr polling drm/amd/amdgpu: re-add missing GC 9.1 and SDMA0 4.1 sh_mask header files drm/amdgpu: give warning before sleep in kiq_r/wreg drm/amdgpu: further mitigate workaround for i915 drm/amdgpu: drop gtt->adev drm/amdgpu: add amdgpu_evict_gtt debugfs entry drm/amd/pp: Add #ifdef checks for CONFIG_ACPI drm/amd/pp: fix "Delete the wrapper layer of smu_allocate/free_memory" drm/amd/pp: Drop wrapper functions for upper/lower_32_bits drm/amdgpu: Delete cgs wrapper functions for gpu memory manager drm/amd/pp: Delete the wrapper layer of smu_allocate/free_memory drm/amd/pp: Remove cgs wrapper function for temperature update Revert "drm/amd/pp: Add a pp feature mask bit for AutoWattman feature" drm/amd/pp: Add auto power profilng switch based on workloads (v2) drm/amd/pp: Revert gfx/compute profile switch sysfs drm/amd/pp: Fix sclk in highest two levels when compute on smu7 ...
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- Convert LVDS support to a drm_bridge driver - Add DT bindings for the R8A77995 SoC - Add DT bindings and driver support for the R8A77970 SoC Note that the LVDS conversion depends on a patch series from Frank Rowand that will make it upstream through Rob Herring's tree. Frank has provided a stable branch based on v4.16-rc1 with the patches, and both Rob and I have merged it into our trees. This should thus generate no conflict when reaching -next. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: dt-bindings: display: renesas: lvds: Document r8a77995 bindings dt-bindings: display: renesas: du: Document r8a77995 bindings drm: rcar-du: lvds: Add R8A77970 support drm: rcar-du: Add R8A77970 support dt-bindings: display: renesas: lvds: Document R8A77970 bindings dt-bindings: display: renesas: du: Document R8A77970 bindings drm: rcar-du: Convert LVDS encoder code to bridge driver drm: rcar-du: Fix legacy DT to create LVDS encoder nodes dt-bindings: display: renesas: Deprecate LVDS support in the DU bindings dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings of: improve reporting invalid overlay target path of: convert unittest overlay devicetree source to sugar syntax of: Documentation: of_overlay_apply() replaced by of_overlay_fdt_apply() of: change overlay apply input data from unflattened to FDT x86: devicetree: fix config option around x86_flattree_get_config()
-
- 08 Mar, 2018 7 commits
-
-
Sean Paul authored
Instead of using timer and spinlocks, use delayed_work and mutexes for rockchip psr. This allows us to make blocking calls when enabling/disabling psr (which is sort of important given we're talking over dpcd to the display). Cc: Caesar Wang <wxt@rock-chips.com> Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-3-enric.balletbo@collabora.com
-
zain wang authored
There's a race between when bridge_disable and when vop_crtc_disable are called. If the flush timer triggers a new psr work between these, we will operate eDP without power shutdowned by bridge_disable. In this case, moving activate/deactivate to enable/disable bridge to avoid it. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
zain wang <wzz@rock-chips.com> Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
The HDMI vpll clock should be enabled when bind() is called. So move the clk_prepare_enable of that clock to bind() function and add the missing clk_disable_unprepare() required in error handling path and unbind(). Fixes: 12b9f204 ("drm: bridge/dw_hdmi: add rockchip rk3288 support") Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
In bind the clk_prepare_enable of the HDMI pclk is called before adding the i2c_adapter. So it should be the other way around in unbind, first remove the i2c_adapter and then call the clk_disable_unprepare. Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
Add missing error handling in bind(). Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by:
-
Jeffy Chen authored
In bind()'s error handling path call destroy functions instead of cleanup functions for encoder and connector and reorder to match how is called in bind(). In unbind() call the connector and encoder destroy functions. Signed-off-by:
-
Ville Syrjälä authored
Replace the ad-hoc iturbt_709 property with the new standard COLOR_ENCODING property. Compiles, but not tested. v2: Fix typos (Ilia) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: nouveau@lists.freedesktop.org Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134816.15229-1-ville.syrjala@linux.intel.comReviewed-by:
Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc
-
- 07 Mar, 2018 29 commits
-
-
Linus Walleij authored
We were previously selecting 1024x768 and 32BPP as the default set-up for the PL111 consumers. This does not work on elder systems: the device tree bindings support a property "max-memory-bandwidth" in bytes/second that states that if you exceed this the memory bus will saturate. The result is flickering and unstable images. Parse the "max-memory-bandwidth" and respect it when intializing the driver. On the RealView PB11MP, Versatile and Integrator/CP we get a nice console as default with this code. Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180307215819.15814-1-linus.walleij@linaro.org
-
Linus Walleij authored
The following happens when connection a DVI output driven from the SiI9022 using a DVI-to-VGA adapter plug: i2c i2c-0: sendbytes: NAK bailout. i2c i2c-0: sendbytes: NAK bailout. Then no picture. Apparently the I2C engine inside the SiI9022 is not smart enough to try to fall back to DDC I2C. Or the vendor have not integrated the electronics properly. I don't know which one it is. After this, the I2C bus seems stalled and the first attempt to read the status register fails, and the code returns with negative return value, and the display fails to initialized. Instead, retry status readout five times and continue even if this fails. Tested on the ARM Versatile Express with a DVI-to-VGA connector, it now gives picture. Introduce a helper struct device *dev variable to make the code more readable. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Linus Walleij authored
We want to cut down the default bpp to 16 on the RealView so we can have a 1024x768 framebuffer console by default. The memory bandwidth limitations makes this not work with the PL111 default of 32bpp. This builds on top of the earlier patches making the framebuffer default bpp a per-variant variable. Reviewed-by:
-
Linus Walleij authored
The PL110, Integrator and Versatile boards strongly prefer to use 16 BPP even if other modes are supported, both to keep down memory consumption and also to easier find a good match to supported resolutions with consideration taken to the memory bandwidth of the platforms. Reviewed-by:
-
Linus Walleij authored
This fixes up the .mode_valid() vtable entry documentation by copyediting the documentation from the .mode_valid() documentation in the drm_modeset_helper_vtables.h file. Fixes: 40275dc4 ("drm: simple_kms_helper: Add mode_valid() callback support") Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Linus Walleij authored
It's better if we explain a bit that this pertains to non-programmable VGA DAC bridges. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
James Zhu authored
When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
James Zhu authored
Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by:
-
Tom St Denis authored
This allows access to pages allocated through the driver with optional IOMMU mapping. v2: Fix number of bytes copied and add write method v3: drop check for kmap return Original-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Shirish S authored
In dce110, the plane configuration is such that plane 0 or the primary plane should be rendered with only RGB data. This patch adds the validation to ensure that no video data is rendered on plane 0. Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Signed-off-by:
-
Emily Deng authored
The sdma wptr polling memory is not fast enough, then the sdma wptr register will be random, and not equal to sdma rptr, which will cause sdma engine hang when load driver, so clean up the sdma wptr directly to fix this issue. v2:add comment above the code and correct coding style Reviewed-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
-
Tom St Denis authored
These are required by umr to properly parse bitfield offsets. Signed-off-by:
Alex Deucher <alexdeucher@amd.com> Signed-off-by:
-
Monk Liu authored
to catch error that may schedule in atomic context early on Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
-
Christian König authored
Disable the workaround on imported BOs as well. Signed-off-by:
-
Christian König authored
We can use ttm->bdev instead. Signed-off-by:
-
Christian König authored
Allow evicting all BOs from the GTT domain. Signed-off-by:
-
Rex Zhu authored
Fix compiling error when CONFIG_ACPI not enabled. Change-Id: I5f901adbc799c10b30e5ea79f8f44760e749fae1 Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com>
-
Christian König authored
For amdgpu_bo_create_kernel to work the handle must be NULL initialized, otherwise we only try to pin and map the BO. Signed-off-by:
Rex Zhu <rezhu@amd.com> Signed-off-by:
-
Rex Zhu authored
replace smu_upper_32_bits/smu_lower_32_bits with the standard kernel macros Reviewed-by:
-
Rex Zhu authored
delete those cgs interfaces: amdgpu_cgs_alloc_gpu_mem amdgpu_cgs_free_gpu_mem amdgpu_cgs_gmap_gpu_mem amdgpu_cgs_gunmap_gpu_mem amdgpu_cgs_kmap_gpu_mem amdgpu_cgs_kunmap_gpu_mem Reviewed-by:
-
Rex Zhu authored
use amdgpu_bo_create/free_kernel instand. Reviewed-by:
-
Rex Zhu authored
Reviewed-by:
-
Rex Zhu authored
This reverts commit e429ea87b2939c4cce1b439baf6d76535a0767f2. Implement Workload Aware Dynamic power management instand of AutoWattman feature in linux. Reviewed-by:
-
Rex Zhu authored
Add power profiling mode dynamic switch based on the workloads. Currently, support Cumpute, VR, Video, 3D,power saving with Cumpute have highest prority, power saving have lowest prority. in manual dpm mode, driver will stop auto switch, just save the client's requests. user can set power profiling mode through sysfs. when exit manual dpm mode, driver will response the client's requests. switch based on the client's prority. v2: squash in fixes from Rex Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Shirish S authored
Add reverse iterator for_each_oldnew_plane_in_state_reverse to compliment the for_each_oldnew_plane_in_state way or reading plane states. The plane states are required to be read in reverse order for amd drivers, cause the z order convention followed in linux is opposite to how the planes are supposed to be presented to DC engine, which is in common to both windows and linux. V2: fix compile time errors due to -Werror flag. Signed-off-by:
Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520392203-6885-1-git-send-email-shirish.s@amd.com
-
Kieran Bingham authored
The D3 (r8a77995) supports two LVDS channels. Extend the binding to support them. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> [Fixed compatible string] Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
Document the D3 (r8a77995) SoC in the R-Car DU bindings. Signed-off-by:
-
Sergei Shtylyov authored
Add support for the R-Car V3M (R8A77970) SoC to the LVDS encoder driver. Note that there are some differences with the other R-Car gen3 SoCs, e.g. LVDPLLCR has the same layout as in the R-Car gen2 SoCs. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
-
Sergei Shtylyov authored
Add support for the R-Car V3M (R8A77970) SoC to the R-Car DU driver. Signed-off-by:
-
