- 02 Jan, 2024 1 commit
-
-
Delphine CC Chiu authored
Add a driver to support ltc4286 chip Signed-off-by:
Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Link: https://lore.kernel.org/r/20231123015440.199822-3-Delphine_CC_Chiu@Wiwynn.com [groeck: Fixed formatting] Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
- 12 Dec, 2023 1 commit
-
-
Delphine CC Chiu authored
Add a device tree bindings for ltc4286 device. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231123015440.199822-2-Delphine_CC_Chiu@Wiwynn.com [groeck: Fixed path to ltc4286.rst] Signed-off-by:
-
- 11 Dec, 2023 38 commits
-
-
Daniel Matyas authored
Added custom channel-specific (temp1) attribute for resolution. The wait time for a conversion in one-shot mode (enable = 0) depends on the resolution. When resolution is 12-bit, the conversion time is 140ms, but the minimum update_interval is 125ms. Handled this problem by waiting an additional 15ms (125ms + 15ms = 140ms). Added 'mask' parameter to the shutdown_write() function. Now it can either write or update bits, depending on the value of mask. This is needed, because for alarms a write is necessary, but for resolution only the resolution bits should be updated. Signed-off-by:
Daniel Matyas <daniel.matyas@analog.com> Link: https://lore.kernel.org/r/20231031182158.124608-5-daniel.matyas@analog.comSigned-off-by:
-
Daniel Matyas authored
When user writes a value to update_interval which does not match the possible values, instead of returning invalid error, return the closest value. Signed-off-by:
-
Daniel Matyas authored
Added 'mask' parameter to the shutdown_write() function. Now it can either write or update bits, depending on the value of mask. This is needed, because for alarms a write is necessary, but for resolution only the resolution bits should be updated. Signed-off-by:
-
Daniel Matyas authored
Created of_match_table and id_table entries for max31828 and max31829. When adi,flt-q and/or adi,alrm-pol are not mentioned, the default configuration is loaded based on the type of the chip. Signed-off-by:
-
Daniel Matyas authored
Used fwnode to retrieve data from the devicetree in the init_client function. If the uint32 properties are not present, the default values are used for max31827 chip. Signed-off-by:
-
Marius Zachmann authored
Replaces the integer 0 with NULL. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312100455.k6m2eO4N-lkp@intel.com/Signed-off-by:
Marius Zachmann <mail@mariuszachmann.de> Link: https://lore.kernel.org/r/20231210220357.77036-1-mail@mariuszachmann.deSigned-off-by:
-
Michal Simek authored
The Analog Monitoring System (AMS) defines 51 channels (Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml) that's why increase number to 51. Signed-off-by:
Michal Simek <michal.simek@amd.com> Acked-by:
-
Armin Wolf authored
A user reported that on this machine, disabling BIOS fan control is necessary in order to change the fan speed. Tested-by: <serverror@serverror.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231123004820.50635-10-W_Armin@gmx.deSigned-off-by:
-
Armin Wolf authored
Document the WMI SMM interface so that future developers can better understand how it works. Signed-off-by:
-
Armin Wolf authored
Some Dell machines like the Dell Optiplex 7000 do not support the legacy SMM interface, but instead expect all SMM calls to be issued over a special WMI interface. Add support for this interface so users can control the fans on those machines. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
In the future, multiple SMM calling backends will exist, with each backend being required to initialize its data. Introduce a helper function for this so the code necessary to initialize dell_smm_data is not duplicated between different backends. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Currently, i8k_dmi_table contains both entries used for DMI matching and entries used to override config options. This does not allow for differentiating between "its safe to issue raw SMM calls on this machine" and "its not safe to issue raw SMM calls on this machine, but here are some config values". Since future SMM backends will need to differentiate between those two cases, move those config entries into a separate table. i8k_dmi_table now serves as a general "its safe to issue raw SMM calls" table. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Future SMM calling backends will not be able to probe during module init, meaning the DMI tables holding config data would have to drop their __initconst attribute. Prevent this by moving the config handling to module init. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Future SMM calling backends will not be able to probe during module init, meaning the DMI tables used for whitelisting features would have to drop their __initconst attribute. Prevent this by moving the whitelist handling to module init. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Future SMM calling backends will not be able to probe during module init, meaning the DMI tables used for backlisting broken features would have to drop their __initconst attribute. Prevent this by moving the blacklist handling to module init. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Modern Dell machines support multiple ways to issue an SMM call. Prepare support for those by introducing dell_smm_ops, which is used by dell_smm_call() to perform a SMM call. Each SMM backend needs to provide a dell_smm_ops structure. Tested-by: <serverror@serverror.com> Reviewed-by:
-
James Seo authored
The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is evidently a valid way of representing a WMI data item as far as the Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from loading. This seems quite rare, but add support for such strings. Treating this as a quirk pretty much means adding that support anyway. Also clean up an oversight in update_numeric_sensor_from_wobj() in which the result of hp_wmi_strdup() was being used without error checking. Reported-by:
Lukasz Stelmach <l.stelmach@samsung.com> Closes: https://lore.kernel.org/linux-hwmon/7850a0bd-60e7-88f8-1d6c-0bb0e3234fdc@roeck-us.net/Tested-by:
James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.techSigned-off-by:
-
Andy Shevchenko authored
MILLI and MICRO may be used in the driver to make code more robust against possible miscalculations. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231128180654.395692-4-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Andy Shevchenko authored
The driver uses math.h and not util_macros.h. All the same for the kernel.h, replace it with what the driver is using. Signed-off-by:
-
Patrick Rudolph authored
The PECI CPU sensors are available as soon as the CPU is powered, however the PECI DIMM sensors are available after DRAM has been trained and thresholds have been written by host firmware. The default timeout of 30 seconds isn't enough for modern multisocket platforms utilizing DDR5 memory to bring up the memory and enable PECI sensor data. Bump the default timeout to 10 minutes in case the system starts without cached DDR5 training data. Signed-off-by:
Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20231130090422.2535542-1-patrick.rudolph@9elements.com [groeck: List affected driver in patch subject] Signed-off-by:
-
Kees Cook authored
Without visibility into the initializers for data->innr, GCC suspects using it as an index could walk off the end of the various 14-element arrays in data. Perform an explicit clamp to the array size. Silences the following warning with GCC 12+: ../drivers/hwmon/pc87360.c: In function 'pc87360_update_device': ../drivers/hwmon/pc87360.c:341:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 341 | data->in_max[i] = pc87360_read_value(data, | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ 342 | LD_IN, i, | ~~~~~~~~~ 343 | PC87365_REG_IN_MAX); | ~~~~~~~~~~~~~~~~~~~ ../drivers/hwmon/pc87360.c:209:12: note: at offset 255 into destination object 'in_max' of size 14 209 | u8 in_max[14]; /* Register value */ | ^~~~~~ Cc: Jim Cromie <jim.cromie@gmail.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by:Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231130200207.work.679-kees@kernel.org [groeck: Added comment into code clarifying context] Signed-off-by:
-
Xing Tong Wu authored
Setting the fan speed is only valid in manual mode; it is not possible to set the fan's speed in automatic mode. Return error when attempting to set the fan speed in automatic mode. Signed-off-by:
Xing Tong Wu <xingtong.wu@siemens.com> Link: https://lore.kernel.org/r/20231121081604.2499-3-xingtong_wu@163.comSigned-off-by:
-
Xing Tong Wu authored
The nct6116 has 2 additional PWM pins compared to the nct6106. Extend the nct6106 PWM arrays to support the nct6116. Signed-off-by:
-
Javier Carrasco authored
These attributes are widely used in the hwmon subsystem, but they still must be documented. Add tempY_emergency_alarm, tempY_max_alarm and tempY_min_alarm to the ABI documentation according to their current usage and access rights in the hwmon subsystem. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-4-8bfb7f51145a@gmail.comSigned-off-by:
-
Javier Carrasco authored
This attribute is defined as read-only by all drivers that support it. It seems that the access rights and description for this attribute were copied from the intrusionY_alarm, which has indeed RW rights and must be cleared by the user. These are the modules that currently use this attribute: - adt7x10 - i5500_temp - jc42 - lm83 - lm90 - lm95245 - max31760 - max6621 - mc34vr500 - tmp401 - tmp464 - tmp513 Fix the attribute description and make it read-only. Fixes: 365b5d63 ("ABI: sysfs-class-hwmon: add a description for tempY_crit_alarm") Signed-off-by:
-
Javier Carrasco authored
All these attributes already exist and are used by the hwmon subsystem, but they still must be documented. The missing attributes are the following: - humidityY_alarm - humidityY_fault - humidityY_label - humidityY_max - humidityY_max_hyst - humidityY_min - humidityY_min_hyst Add the missing humidity attributes to the ABI documentation according to their current usage and access rights in the hwmon subsystem. Signed-off-by:
-
Javier Carrasco authored
Preliminary step to add the missing humidity attributes in the ABI documentation. Adding new elements alphabetically is a common practice that has been loosely followed in the sysfs-class-hwmon documentation. Since most of the humidity attributes must be added to the file, a single attribute needs to be rearranged to reinforce alphabetical order. Signed-off-by:
-
Peter Yin authored
Add support for mp5990 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a Hot-Swap Controller. Signed-off-by:
Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20231113155008.2147090-3-peteryin.openbmc@gmail.com [groeck: Improved and clarified comments] Signed-off-by:
-
Peter Yin authored
Add a device tree bindings for mp5990 device. Signed-off-by:
-
Rob Herring authored
Use preferred i2c_get_match_data() instead of of_match_device() and i2c_match_id() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Adjust the 'chips' enum to not use 0, so that no match data can be distinguished from a valid enum value. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231115205703.3730448-3-robh@kernel.org [groeck: Use double cast for enum chips assignment to make compiler happy] Signed-off-by:
-
Guenter Roeck authored
Changing the "kinds" enum start value to be 1-indexed instead of 0-indexed caused look-ups in nct6775_device_names[] to be misaligned or off the end. Initialize the string list with explicit indexes. Cc: Rob Herring <robh@kernel.org> Cc: Kees Cook <keescook@chromium.org> Fixes: 10a0575e ("hwmon: nct6775-i2c: Use i2c_get_match_data()") Reviewed-by:
-
Kees Cook authored
Changing the "kinds" enum start value to be 1-indexed instead of 0-indexed caused look-ups in nct6775_sio_namesp[] to be misaligned or off the end. Coverity reported: *** CID 1571052: Memory - illegal accesses (OVERRUN) drivers/hwmon/nct6775-platform.c:1075 in nct6775_find() 1069 sio_data->kind == nct6793 || sio_data->kind == nct6795 || 1070 sio_data->kind == nct6796 || sio_data->kind == nct6797 || 1071 sio_data->kind == nct6798 || sio_data->kind == nct6799) 1072 nct6791_enable_io_mapping(sio_data); 1073 1074 sio_data->sio_exit(sio_data); vvv CID 1571052: Memory - illegal accesses (OVERRUN) vvv Overrunning array "nct6775_sio_names" of 13 8-byte elements at element index 13 (byte offset 111) using index "sio_data->kind" (which evaluates to 13). 1075 pr_info("Found %s or compatible chip at %#x:%#x\n", 1076 nct6775_sio_names[sio_data->kind], sioaddr, addr); 1077 1078 return addr; 1079 } 1080 Initialize the string list with explicit indexes. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rob Herring <robh@kernel.org> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Fixes: 10a0575e ("hwmon: nct6775-i2c: Use i2c_get_match_data()") Signed-off-by: -
Rob Herring authored
Use preferred i2c_get_match_data() instead of of_match_device() and i2c_match_id() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Adjust the 'kinds' enum to not use 0, so that no match data can be distinguished from a valid enum value. Signed-off-by:
-
Rob Herring authored
Use preferred i2c_get_match_data() instead of of_match_device() and i2c_match_id() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by:
-
Gustavo A. R. Silva authored
Based on the documentation below, the maximum number of Fan tach channels is 16: Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt:45: 45 - aspeed,fan-tach-ch : should specify the Fan tach input channel. 46 integer value in the range 0 through 15, with 0 indicating 47 Fan tach channel 0 and 15 indicating Fan tach channel 15. 48 At least one Fan tach input channel is required. However, the compiler doesn't know that, and legitimaly warns about a potential overwrite in array `u8 fan_tach_ch_source[16]` in `struct aspeed_pwm_tacho_data`, in case `index` takes a value outside the boundaries of the array: drivers/hwmon/aspeed-pwm-tacho.c: 179 struct aspeed_pwm_tacho_data { ... 184 bool fan_tach_present[16]; ... 193 u8 fan_tach_ch_source[16]; 196 }; In function ‘aspeed_create_fan_tach_channel’, inlined from ‘aspeed_create_fan’ at drivers/hwmon/aspeed-pwm-tacho.c:877:2, inlined from ‘aspeed_pwm_tacho_probe’ at drivers/hwmon/aspeed-pwm-tacho.c:936:9: drivers/hwmon/aspeed-pwm-tacho.c:751:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 751 | priv->fan_tach_ch_source[index] = pwm_source; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ drivers/hwmon/aspeed-pwm-tacho.c: In function ‘aspeed_pwm_tacho_probe’: drivers/hwmon/aspeed-pwm-tacho.c:193:12: note: at offset [48, 255] into destination object ‘fan_tach_ch_source’ of size 16 193 | u8 fan_tach_ch_source[16]; | ^~~~~~~~~~~~~~~~~~ Fix this by sanity checking `index` before using it to index arrays of size 16 elements in `struct aspeed_pwm_tacho_data`. Also, pass `dev` as argument to function `aspeed_create_fan_tach_channel()`, and add an error message in case `index` is out-of-bounds, in which case return `-EINVAL`. Signed-off-by: -
Yang Li authored
Fix some kernel-doc comments to silence the warnings: drivers/hwmon/sht4x.c:65: warning: Function parameter or member 'valid' not described in 'sht4x_data' drivers/hwmon/sht4x.c:73: warning: Function parameter or member 'data' not described in 'sht4x_read_values' drivers/hwmon/sht4x.c:73: warning: Excess function parameter 'sht4x_data' description in 'sht4x_read_values' Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7220Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
-
Delphine CC Chiu authored
Add support for EMC1442 which is compatible with EMC1402. Signed-off-by:
Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20231102090808.427351-1-Delphine_CC_Chiu@wiwynn.com [groeck: compatible with EMC1402, not EMC1403] Signed-off-by:
-
