- 19 Jan, 2015 3 commits
-
-
Nicolas Dichtel authored
With this patch, a user can define an id for a peer netns by providing a FD or a PID. These ids are local to the netns where it is added (ie valid only into this netns). The main function (ie the one exported to other module), peernet2id(), allows to get the id of a peer netns. If no id has been assigned by the user, this function allocates one. These ids will be used in netlink messages to point to a peer netns, for example in case of a x-netns interface. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rosen, Rami authored
Commit 02dba438 ("bridge: fix setlink/dellink notifications") removed usage of oflags in both rtnl_bridge_setlink() and rtnl_bridge_dellink() methods. This patch removes this variable as it is no longer needed. Signed-off-by:
Rami Rosen <rami.rosen@intel.com> Signed-off-by:
-
David S. Miller authored
Commit 053c095a ("netlink: make nlmsg_end() and genlmsg_end() void") didn't catch all of the cases where callers were breaking out on the return value being equal to zero, which they no longer should when zero means success. Fix all such cases. Reported-by:
Marcel Holtmann <marcel@holtmann.org> Reported-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
- 18 Jan, 2015 24 commits
-
-
Jiri Pirko authored
Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Martin KaFai Lau authored
In the ipip tunnel, the skb->queue_mapping is lost in ipip_rcv(). All skb will be queued to the same cell->napi_skbs. The gro_cell_poll is pinned to one core under load. In production traffic, we also see severe rx_dropped in the tunl iface and it is probably due to this limit: skb_queue_len(&cell->napi_skbs) > netdev_max_backlog. This patch is trying to alloc_percpu(struct gro_cell) and schedule gro_cell_poll to process the skb in the same core. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David Ahern authored
Add packet and byte counters for RX and TX paths. $ ifconfig eth1 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::5054:ff:fe12:3501 prefixlen 64 scopeid 0x20<link> ether 52:54:00:12:35:01 txqueuelen 1000 (Ethernet) RX packets 63 bytes 15813 (15.4 KiB) RX errors 1 dropped 0 overruns 0 frame 0 TX packets 79 bytes 17991 (17.5 KiB) TX errors 7 dropped 0 overruns 0 carrier 0 collisions 0 Rx / Tx errors tested by injecting faults in qemu's hardware model for Rocker. v2: - moved counter locations to avoid potential use after free per Florian's comment Signed-off-by:David Ahern <dsahern@gmail.com> Cc: Scott Feldman <sfeldma@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Felipe Balbi authored
CPSW never uses RX_THRESHOLD or MISC interrupts. In fact, they are always kept masked in their appropriate IRQ Enable register. Instead of allocating an IRQ that never fires, it's best to remove that code altogether and let future patches implement it if anybody needs those. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
This patch is in preparation for a nicer IRQ handling scheme where we use different IRQ handlers for each IRQ line (as it should be). Later, we will also drop IRQs offset 0 and 3 because they are always disabled in this driver. Signed-off-by:
-
Johannes Berg authored
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by:Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
chas williams - CONTRACTOR authored
Signed-off-by:
Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by:
-
Akash Shende authored
Fix some spelling mistakes, coding style and don't assign value to static var. Signed-off-by:
Akash Shende <akash0x53s@gmail.com> Signed-off-by:
-
Richard Alpe authored
Commit 07f6c4bc (tipc: convert tipc reference table to use generic rhashtable) introduced a problem with port listing in the new netlink API. It broke the resume functionality resulting in a never ending loop. This was caused by starting with the first hash table every time subsequently never returning an empty skb (terminating). This patch fixes the resume mechanism by keeping a logical reference to the last hash table along with a logical reference to the socket (port) that didn't fit in the previous message. Signed-off-by:
Richard Alpe <richard.alpe@ericsson.com> Reviewed-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-01-16 Here are some more bluetooth & ieee802154 patches intended for 3.20: - Refactoring & cleanups of ieee802154 & 6lowpan code - Various fixes to the btmrvl driver - Fixes for Bluetooth Low Energy Privacy feature handling - Added build-time sanity checks for sockaddr sizes - Fixes for Security Manager registration on LE-only controllers - Refactoring of broken inquiry mode handling to a generic quirk Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Jiri Pirko authored
This patch benefits from newly introduced switchdev notifier and uses it to propagate fdb learn events from rocker driver to bridge. That avoids direct function calls and possible use by other listeners (ovs). Suggested-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Jiri Pirko authored
This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by:
-
Eric Dumazet authored
After a "page = alloc_page(mask);", we do not need to use compound_head() : page already points to the right place. This would be true even if using alloc_pages(). Signed-off-by:
-
Nicolas Dichtel authored
This field already contains the length of the iovec, no need to calculate it again. Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== s390: network patches for net-next here are some s390 related patches for net-next ==================== Signed-off-by: -
Thomas Richter authored
The member irq_tasklet in the qeth_channel structure is not referenced anymore and is removed from the structure. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Eugene Crosser authored
Replace combination of strsep() and a temporary char * followed by a series of "if (!strcmp(...))" with a series of "if (sysfs_streq(...))". Signed-off-by:
Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by:
Thomas-Mich Richter <tmricht@de.ibm.com> Signed-off-by:
-
Eugene Crosser authored
qeth_card_hw_is_reachable() was introduced as part of a new functionality, but it is a useful abstraction that can replace verbose checks througout the rest of the `qeth` driver. Signed-off-by:
-
Markus Elfring authored
The function debug_unregister() tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Aya Mahfouz authored
This patch is concerned with migrating the time variables for the s390 network drivers. The changes handle the y2038 problem where timespec will overflow in the year 2038. timespec was replaced by unsigned long and all time variables get their values from the jiffies global variable. This was done for the sake of speed and efficiency. Signed-off-by:
Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by:
-
Jiri Pirko authored
It was suggested by DaveM to change the name as "len" might indicate unit bytes. Suggested-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Jiri Pirko authored
This action provides a possibility to exec custom BPF code. Signed-off-by:
-
Roopa Prabhu authored
problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by:Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-01-16 This series contains updates to i40e and i40evf. This series is a little bit larger than normal because two of the patches are version bumps. Shannon provides tweaks to i40e and i40evf to keep the firmware, software and silicon validation in line together by removing unused and deprecated code, adding define for iSCSI and fix queue mask size. Fix i40e so we do not give up in the reset/rebuild process if DCB setup fails, just handle it the same as in the probe setup. Cleans up PTP log messages by removing the use of __func__ as we are not using that any longer and removes the netdev name, since that can change and can be misleading. Adds struct size checks to indirect and command structs that were left out previously. Added admin queue API updates (LLDP control, OEM OCSD and OCBB commands). Kevin increases ASQ timeout for scenarios with multi-function devices. Carolyn fixes a problem where the interrupts descriptions from the MSIx configuration were truncating the needed bus info, which makes it hard to distinguish configurations from port to port. Increased the string buffer size in order to allow the full data to be displayed. Sravanthi cleans up the dump stats string from debugfs. Jacob updates i40e to only enable the PTP interrupt in PFs which have PTP enabled, instead of blindly enabling the PTP interrupt flags for all PFs. Also updated i40e so that we do not do Tx or Rx timestamps if we do not have PTP enabled. Added the same check against pf->ptp_rx as we have in Rx timestamp code path because it is possible that the user can configure only Tx hardware timestamping so we do not want to check for Rx timestamp hang since the software won't be handling them. Neerav updates the driver to disable firmware LLDP agent for NICs with a firmware version lower than v4.3 and added a message when this happens. Adds parsing and reporting of iSCSI capability for a given device or function, as well as adding support for iSCSI partition type with DCB in NPAR mode. v2: - Dropped patch 10 "i40e: clean up PTP log messages" based on feedback from David Laight and David Miller - Split up the original patch 13 "i40e: AQ API updates for new commands" into 2 patches (now #12 & #13) based on feedback from Or Gerlitz ==================== Signed-off-by:
-
- 17 Jan, 2015 13 commits
-
-
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2015-01-16 The following series of patches includes functional updates to the driver as well as some trivial changes. - Fix checks/warnings from checkpatch in the amd-xgbe driver - Fix checks/warnings from checkpatch in the amd-xgbe-phy driver - Add a check to be sure that the amd-xgbe driver is using the amd-xgbe-phy driver - Use a saved control register value when bringing the PCS out of suspend - Clear all device state during a device restart - Simplify the Rx descriptor ring tracking - Remove the need for Tx path spinlocks - Update the auto-negotiation logic to make use of the auto-negotiation interrupt - Properly support/advertise the FEC capability of the device - Use the proper page registers during auto-negotiation extended next page exchange - Add ACPI support to the amd-xgbe and amd-xgbe-phy drivers - Allow platform specific phy settings to be supplied by UEFI This patch series is based on net-next. ==================== Signed-off-by: -
Lendacky, Thomas authored
Certain PHY settings need to be configurable by UEFI depending on the platform being used. Add new device tree / ACPI properties that, if present, will override the pre-determined values currently used. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Lendacky, Thomas authored
Add support for ACPI to the amd-xgbe and amd-xgbe-phy drivers. This support converts many of the device tree APIs to the new device_property APIs. Signed-off-by:
-
Lendacky, Thomas authored
When receiving and processing extended next pages the base registers were used instead of the XNP registers. Update the code to use the device XNP and link partner XNP registers. Signed-off-by:
-
Lendacky, Thomas authored
Advertise and apply the Forward Error Correction capabilities of the device based on the FEC ability of the device. Also, remove the use of some hard coded values related to KR and FEC in preference of some #defines. Signed-off-by:
-
Lendacky, Thomas authored
The auto negotiation logic was geared to being the initiator of the auto negotiation. This presented problems when auto negotiation was initiated by the remote end. Change the auto negotiation logic to make use of the auto negotiation event interrupt thus allowing the auto negotiation state machine to function properly in either scenario. This also removes the polling during auto-negotiation. Signed-off-by:
-
Lendacky, Thomas authored
Since the Tx ring cleanup can run at the same time that data is being transmitted, a spin lock was used to protect the ring. This patch eliminates the need for Tx spinlocks by updating the current ring position only after all ownership bits for data being transmitted have been set. This will insure that ring operations in the Tx cleanup path do not interfere with the ring operations in the Tx transmit path. Signed-off-by:
-
Lendacky, Thomas authored
Make the Rx descriptor ring processing similar to the Tx descriptor ring processing. Remove the realloc_index and realloc_threshold variables and base everything on the current index counter and the dirty index counter. Signed-off-by:
-
Lendacky, Thomas authored
When performing a device restart, like during an MTU change, sometimes the device queues still have data and get hung up trying to flush resulting in the device becoming unresponsive until brought down and back up. To prevent this, always perform a device reset during a restart. Signed-off-by:
-
Lendacky, Thomas authored
Reads to registers are undefined when the PCS is powered down. To be safe, save the CTRL1 register used for power down during suspend and restore that value during resume. Signed-off-by:
-
Lendacky, Thomas authored
The amd-xgbe driver relies on the amd-xgbe-phy phylib driver. Add a check to be sure that if any errors occur during probing of the amd-xgbe-phy driver then the amd-xgbe driver returns an error. Signed-off-by:
-
Lendacky, Thomas authored
This set of patches resolves some checks reported by the checkpatch tool. Signed-off-by:
-
Lendacky, Thomas authored
This set of patches resolves some checks reported by the checkpatch tool. Signed-off-by:
-
